The Taylor XH-180 is known for its design as a small, experimental helicopter. It features coaxial rotors, which eliminate the need for a tail rotor and provide better stability and control. Additionally, the XH-180 was developed in the early 1960s, reflecting a period of innovative exploration in rotorcraft design.
National Lift Equipment Sales: (215) 544-2708 300 Pond St. Bristol, PA 19007
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type: Diesel
General Specifications
Operator Position: Sit Down
Number of Wheels: 4
Tire Type: Cushion
Dimensions
Overall Length: 150 inches
Overall Width: 60 inches
Height to Top of Overhead Guard: 90 inches
Turning Radius: 120 inches
Wheelbase: 85 inches
Capacity
Rated Load Capacity: 30,000 lbs
Load Center: 24 inches
Performance
Travel Speed: 15 mph
Lift Speed (Loaded): 90 feet per minute
Lowering Speed (Loaded): 100 feet per minute
Engine Specifications
Engine Type: Diesel
Engine Power: 120 HP
Displacement: 6 liters
Transmission
Type: Powershift
Number of Speeds: 3 Forward / 3 Reverse
Brake System
Service Brake: Wet Disc
Parking Brake: Spring Applied Hydraulic Release
Hydraulic System
Pump Type: Gear
Operating Pressure: 3000 psi
Fork Specifications
Fork Length: Varies
Fork Width: 8 inches
Fork Thickness: 3 inches
Wholesale Lift Trucks Sales: 519 461 9900 21767 Nissouri Rd Unit B Thorndale, ON N0M 2P0
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
New 2024 Taylor XC-180SL cushion high capacity forklit
General Specifications
Model Number: XC-180SL
Manufacturer: Taylor
Type: Forklift
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type: LP Gas
Dimensions
Overall Length: Approx. 12 feet
Overall Width: Approx. 4 feet
Overall Height: Approx. 7 feet
Wheelbase: Approx. 7 feet
Ground Clearance: Approx. 3-4 inches
Performance
Load Capacity: Up to 18,000 lbs
Travel Speed: Varies (generally up to 12 mph)
Engine Power: Approx. 95 HP
Gradeability: Up to 20%
Tires
Type: Cushion
Front Tire Size: Approximately 22x9x16 inches
Rear Tire Size: Approximately 18x7x12 inches
Hydraulic System
Pump Capacity: Approx. 20 gallons per minute
Hydraulic Pressure: Approx. 3,000 psi
Operator Features
Seating Capacity: 1 (Sit Down)
Steering: Power Steering
Controls: Ergonomic Control Levers
Cabin: Open or Optional Enclosed Cab
Forks
Fork Length: Varies
Fork Width: Approx. 6 inches
Fork Thickness: Approx. 2 inches
Welch Utah Keith Fine: 720-574-2538 2181 3200 W west valley city Salt Lake City, UT 84119
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Controls: Ergonomically designed joystick controls
MONTHLY RENTAL
$7,650 USD
WEEKLY RENTAL
$2,550 USD
DAILY RENTAL
$850 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Continental Lift Truck - Rentals Rental Dept: 952 679 2292 16600 Johnson Memorial Dr Jordan, MN 55352
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Continental Lift Truck - Rentals Rental Dept: 952 679 2292 16600 Johnson Memorial Dr Jordan, MN 55352
Cummins QSB6. 7-160 Tier III, Elec Turbo Charged Engine,CALL
General Information
Model Number: TE4030
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel
Powertrain
Engine Type: Diesel Engine
Horsepower: Approximately 100 HP
Transmission: Powershift
Dimensions
Overall Length: Approximately 206 inches
Overall Width: Approximately 92 inches
Overall Height (top of overhead guard): Approximately 116 inches
Wheelbase: Approximately 116 inches
Ground Clearance: Approximately 10 inches
Capacity
Load Capacity: Approximately 30,000 lbs
Performance
Maximum Travel Speed: Approximately 18 mph
Drawbar Pull: Approximately 18,000 lbs
Tires
Tire Type: Pneumatic
Front Tires: Approximately 10.00-20
Rear Tires: Approximately 10.00-20
Brakes
Service Brake: Hydraulic
Parking Brake: Manual
Forks
Fork Length: Varies
Fork Width: Approximately 8 inches
Operation
Operator Position: Sit Down
Steering: Power Steering
Features
Adjustable Steering Column
Operator Presence System
Hydraulic Control Levers
AHP Enterprises Arthur Peagler: 912-289-8980 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
AHP Enterprises Arthur Peagler: 912-289-8980 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
RECONDITIONED 2002 TAYLOR THD250S WITH ENCLOSE CABIN
General Information
Manufacturer: Taylor
Model Number: THD250S
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel
Dimensions
Overall Length: Approximately 240 inches
Overall Width: Approximately 108 inches
Overall Height: Approximately 120 inches
Wheelbase: Approximately 150 inches
Ground Clearance: Approximately 12 inches
Performance
Load Capacity: 55,000 lbs
Travel Speed: 21 mph
Gradeability: 27%
Engine
Engine Model: Cummins QSB6.7
Engine Power: 173 hp
Cylinders: 6
Fuel Tank Capacity: 100 gallons
Tires
Tire Type: Pneumatic
Hydraulic System
Hydraulic Flow Rate: 60 gallons per minute
Forks
Fork Length: Varies
Operator Environment
Cabin: Enclosed
Controls: Finger-tip controls
Seat: Adjustable with suspension
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
30000 lb capacity, 18' mast with s/s and fp, 8' foks , cab
General Specifications
Model Number: THD 300
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel
Engine
Fuel Type: Diesel
Engine Power: Varies based on engine model
Dimensions
Overall Length: Approximately 292 inches (varies based on configuration)
Overall Width: Approximately 134 inches
Overall Height: Approximately 148 inches
Wheelbase: Approximately 154 inches
Ground Clearance: Varies by configuration
Tire Size (Front/Rear): Varies by model
Performance
Load Capacity: 60,000 lbs
Travel Speed: Varies based on load and conditions
Lifting Speed: Varies based on load
Gradeability: Varies based on load and configuration
Operational Data
Operator Seat: Sit Down
Steering: Power Steering
Brakes: Air Brakes
Transmission: Automatic
Forks
Fork Length: Varies
Additional Features
Safety Features: Equipped with standard safety features
Cabin: Enclosed or Open depending on configuration
Hydraulic System: Varies based on model
AHP Enterprises Arthur Peagler: 912-289-8980 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height: Approximately 11 feet (132 inches)
Wheelbase: Approximately 10 feet (120 inches)
Operating Weight: Approximately 62,000 pounds
Engine Specifications
Engine Make: Diesel Engine
Engine Model: TBD
Horsepower: Approximately 200 HP
Displacement: Approximately 540 cubic inches
Performance
Lift Capacity: 52,000 pounds
Travel Speed: Approximately 15 MPH
Load Center: 48 inches
Gradeability: Approximately 20%
Tires
Tire Type: Pneumatic
Front Tires: Approximately 12 x 24 inches
Rear Tires: Approximately 12 x 24 inches
Hydraulics
Hydraulic System: TBD
Hydraulic Flow: TBD
Brakes
Brake Type: Wet Disc
Service Brake: Hydraulic Actuated
Parking Brake: Manual
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Tire Type: Pneumatic or solid, depending on model customization
Cabin Features:
Design: Ergonomic, with good visibility
Climate Control: Available heating and air conditioning options
Instrumentation: Modern display with real-time diagnostics and performance data
Safety Features:
Load Sensing System
Emergency Stop Button
Stability Control Systems
AHP Enterprises Arthur Peagler: 912-289-8980 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
AHP Enterprises Arthur Peagler: 912-289-8980 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
AHP Enterprises Arthur Peagler: 912-289-8980 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 37-40 feet (varies based on configuration and attachments)
Overall Width: About 12 feet
Wheelbase: Approximately 20-22 feet
Ground Clearance: Roughly 1.5 feet
Performance
Rated Load Capacity: 99,000 pounds
Travel Speed (Loaded): Up to 21 mph
Travel Speed (Unloaded): Up to 24 mph
Turning Radius: Approximately 28 feet
Fuel Tank Capacity: Around 160 gallons
Operational Features
Brake System: Wet Disc Brakes
Steering: Articulated Power Steering
Hydraulic System: Load-sensing hydraulic system
Cab Features
Operator Seat: Adjustable with suspension
Controls: Joystick control for lift and tilt functions
Cabin: Soundproof and climate-controlled
Safety Features
Load Sensing and Height Monitoring Systems
Reverse Alarm
LED Work Lights
Emergency Stop Buttons
K.T. Graham Inc. Keith Graham: 717-647-5577 137 S Front St Columbia, PA 17512
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length (without forks): Approximately 218 inches
Turning Radius: Approximately 162 inches
Performance:
Load Capacity: Approximately 40,000 lbs
Travel Speed (loaded): Approximately 17 mph
Lifting Speed (loaded): Approximately 60 fpm (feet per minute)
Tires:
Type: Pneumatic
Front Tire Size: 12.00 x 24
Rear Tire Size: 12.00 x 20
Fork Specifications:
Length: Varies
Width: Approximately 10 inches
Thickness: Approximately 3 inches
Operator Compartment:
Seat: Adjustable with suspension
Controls: Ergonomic, multi-functional joystick
Visibility: Enhanced operator visibility design
Safety Features:
LED Work Lights
Automatic Fork Leveling
Reversing Camera
Anti-slip Step Plates
Additional Features:
Weather Resistant Cab
Hydraulic Control System
Digital Load Indicator
Hamre Equipment Co. Inc. Lee Hamre: 530-918-4445 3930 Esplanade Chico, CA 95973
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close