Taylor ty550rr Forklifts For Sale

Motor Service, Inc.
130 Byassee Dr

1992 Taylor TY550-RR

Motor Service, Inc.

Buy or Rent

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: M-114
MAKE:: Taylor
MODEL:: TY550-RR
MAST TYPE:: Three Stage
MAST - LOWERED:: 114 in
MAST - RAISED:: 144 in
FUEL:: Diesel
HOURS:: 743 Hrs
SIDESHIFTER:: YES
CAPACITY:: 55000 lbs
PRICE: CALL FOR PRICE

Call for sale price or rental rates! 314-731-4111

General Information
- Model Number: TY550-RR
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
- Fuel Type: Diesel
Physical Dimensions
- Total Weight: Approximately 123,000 lbs
- Overall Length: Approximately 325 inches
- Overall Width: Approximately 143 inches
- Overall Height: Approximately 145 inches
- Ground Clearance: Approximately 14 inches
- Wheelbase: Approximately 178 inches
- Turning Radius: Approximately 300 inches
- Fork Length: Varies
Performance
- Load Capacity: 55,000 lbs
- Lifting Speed: Approximately 60 feet per minute
- Lowering Speed: Approximately 80 feet per minute
- Travel Speed: Approximately 20 mph
- Gradeability: Approximately 25%
Engine Specifications
- Engine Type: Diesel
- Engine Power: Approximately 300 HP
- Fuel Tank Capacity: Approximately 200 gallons
Tires and Wheels
- Tire Type: Pneumatic
- Wheel Base: Approximately 178 inches
Ergonomics and Features
- Operator Type: Sit Down
- Seating Capacity: 1
- Steering: Power Steering
- Controls: Fully Integrated Joystick Controls
Safety Features
- Braking System: Wet Disc Brakes
- Seat Belt: Yes
- Overhead Guard: Yes
- Warning Alarm: Backup Alarm Included

Motor Service, Inc.
Sales Dept.: 314 200 0520
130 Byassee Dr
Hazelwood, MO 63042

Get Quote

Get Flyer

Hazelwood, MO 63042

314 200 0520

Cal-Lift Inc
13027 Crossroads Parkway South

Listings above this line match your search request, listings below may not match but are similar and may be used as an alternative.

2020 Taylor X280S

Cal-Lift Inc

Buy or Rent

DETAILS

SPECS

CONTACT

STK#:: 31226R
MAKE:: Taylor
MODEL:: X280S
MAST TYPE:: Two Stage
MAST - RAISED:: 180 in
FUEL:: Diesel
HOURS:: 95 Hrs
SIDESHIFTER:: YES
CAPACITY:: 28000 lbs
PRICE: CALL FOR PRICE

General Information
- Model Number: X280S
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Rough Terrain (Vertical Mast)
Fuel
- Fuel Type: Diesel
Performance
- Lift Capacity: Varies, typically around 61,730 lbs
Dimensions
- Overall Width: Approximately 9.6 feet
- Overall Length: Approximately 23.9 feet
- Overall Height (cab): Approximately 12.5 feet
- Wheelbase: Approximately 13.2 feet
- Ground Clearance: Approximately 1.3 feet
- Fork Length: Varies
Weights
- Operating Weight: Approximately 84,500 lbs
Tires
- Tire Type: Pneumatic
Engine
- Engine Type: Diesel Engine
- Horsepower: Approximately 325 HP
- Engine Manufacturer: Depends on configuration, typically Cummins or Perkins
Transmission
- Transmission Type: Powershift
- Number of Speeds: 3 Forward / 3 Reverse
Brakes
- Service Brakes: Wet Disc
- Parking Brake: Disc Brake
Cab
- Cab Type: Enclosed with A/C and Heater
Hydraulics
- Hydraulic System Pressure: Approximately 3,500 psi

Cal-Lift Inc
Mike Marrs: 562-521-1340
13027 Crossroads Parkway South
City of Industry, CA 91746

Get Quote

Get Flyer

City of Industry, CA 91746

562-521-1340

Cal-Lift Inc
13027 Crossroads Parkway South

2019 Taylor X220S

Cal-Lift Inc

Buy or Rent

DETAILS

SPECS

CONTACT

STK#:: 31079R
MAKE:: Taylor
MODEL:: X220S
MAST TYPE:: Two Stage
MAST - RAISED:: 180 in
FUEL:: Diesel
HOURS:: 1307 Hrs
SIDESHIFTER:: YES
CAPACITY:: 22000 lbs
PRICE: CALL FOR PRICE

General Specifications
- Model Number: X220S
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Rough Terrain (Vertical Mast)
Dimensions
- Overall Length: 22.8 ft
- Overall Width: 8.2 ft
- Overall Height: 10.5 ft
- Wheelbase: 9.8 ft
- Ground Clearance: 1.3 ft
Performance
- Maximum Capacity: 22,000 lbs
- Travel Speed: 17 mph
- Load Center: 2 ft
- Tilt Angle: Forward 10°, Backward 12°
Engine
- Engine Type: Diesel
- Power: 110 hp
- Cylinder Count: 4
- Displacement: 276 cubic inches
Transmission
- Transmission Type: Powershift
- Number of Speeds: 3 forward, 2 reverse
Fuel System
- Fuel Capacity: 45 gallons
Tires
- Tire Type: Pneumatic
- Tire Size Front: 14.5-20
- Tire Size Rear: 12-18
Brakes
- Service Brake: Wet Disc
- Parking Brake: Mechanical Lever
Hydraulic System
- Pump Capacity: 25 GPM
- System Pressure: 3,500 psi
- Number of Hydraulic Functions: 3
Operator's Environment
- Operator's Seat: Adjustable with Suspension
- Instrumentation: Digital Display
- Cab: Enclosed with Heating and Air Conditioning
- Steering: Hydraulic Power Steering
Forks
- Fork Length: Varies
- Fork Width: 8 inches

Cal-Lift Inc
Mike Marrs: 562-521-1340
13027 Crossroads Parkway South
City of Industry, CA 91746

Get Quote

Get Flyer

City of Industry, CA 91746

562-521-1340

Hamre Equipment Co. Inc.
3930 Esplanade

2002 Taylor THDC955

Hamre Equipment Co. Inc.

Used

DETAILS

SPECS

CONTACT

STK#:: HE 3614
MAKE:: Taylor
MODEL:: THDC955
PRICE: CALL FOR PRICE

General Information
- Model Number: THDC955
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
Dimensions
- Overall Length: Approximately 36 feet
- Overall Width: Approximately 11 feet
- Overall Height (Without mast): Approximately 15 feet
- Ground Clearance: Approximately 1.5 feet
Capacity
- Load Capacity: 95,000 lbs
Powertrain
- Engine Type: Diesel
- Engine Manufacturer: Depending on specific configuration
- Transmission Type: Powershift
- Drive: 2 Wheel Drive (2WD)
Performance
- Travel Speed (Loaded): Approximately 15 mph
- Travel Speed (Unloaded): Approximately 19 mph
- Lift Speed (Loaded): Approximately 63 feet/min
- Lift Speed (Unloaded): Approximately 73 feet/min
Tires
- Tire Type: Pneumatic
- Number of Tires: 4
- Tire Size (Front): Varies
- Tire Size (Rear): Varies
Fork Specifications
- Fork Length: Varies
- Fork Width: Approximately 10 inches
- Fork Thickness: Approximately 3 inches
Additional Features
- Operator's Cabin: Enclosed with standard features
- Hydraulics: Servo-controlled hydraulics system
- Steering: Power steering

Hamre Equipment Co. Inc.
Lee Hamre: 530-918-4445
3930 Esplanade
Chico, CA 95973

Get Quote

Get Flyer

Chico, CA 95973

530-918-4445

2008 Taylor T520M

AHP Enterprises

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: AHP1
MAKE:: Taylor
MODEL:: T520M
MAST TYPE:: Two Stage
MAST - RAISED:: 132 in
FUEL:: Diesel
HOURS:: 8610 Hrs
SIDESHIFTER:: YES
CAPACITY:: 52000 lbs
PRICE: $275,000 USD

Taylor T520 M Excellent condition 52000 lb capacity

General Information
- Model Number: T520M
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
Engine
- Engine Type: Diesel
- Horsepower: Approx. 200 HP
- Fuel Capacity: 100 gallons
Dimensions
- Overall Length: Varies
- Overall Width: 120 inches
- Overall Height: 144 inches
- Wheelbase: 160 inches
Weight
- Operating Weight: 70,000 lbs
Performance
- Load Capacity: 52,000 lbs
- Lift Speed: 70 feet/min
- Travel Speed (loaded): 20 mph
- Travel Speed (unloaded): 23 mph
Tires
- Tire Type: Pneumatic
- Front Tires: 12.00 x 20
- Rear Tires: 12.00 x 20
Hydraulic System
- Hydraulic Tank Capacity: 80 gallons
- Hydraulic Flow Rate: 100 gallons/min
Operators Area
- Seat Type: Adjustable suspension seat
- Controls: Joystick control
Additional Features
- Power Steering
- Load Sensing Hydraulics
- Engine Protection System

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

Finance at $5917/mo

Cal-Lift Inc
13027 Crossroads Parkway South

2022 Taylor XH350L

Cal-Lift Inc

Buy or Rent

DETAILS

SPECS

CONTACT

STK#:: 32422R
MAKE:: Taylor
MODEL:: XH350L
MAST TYPE:: Two Stage
MAST - RAISED:: 216 in
FUEL:: Diesel
HOURS:: 1 Hrs
SIDESHIFTER:: YES
CAPACITY:: 35000 lbs
PRICE: CALL FOR PRICE

General Information
- Model Number: XH350L
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
Engine Specifications
- Engine Type: Diesel
- Engine Model: Cummins QSL9
- Displacement: 543 cubic inches
- Rated Power Output: 300 HP
- Fuel Capacity: 100 gallons
Dimensions
- Overall Length: 262 inches (varies)
- Overall Width: 111 inches
- Height to Top of Overhead Guard: 136 inches
- Wheelbase: 143 inches
- Ground Clearance: 14 inches
Performance
- Maximum Lift Capacity: 35,000 lbs
- Travel Speed (Loaded): 15 mph
Tires
- Type: Pneumatic
- Tire Size (Front): 14.00 x 24
- Tire Size (Rear): 14.00 x 24
Additional Features
- Operator Cab: Enclosed with climate control
- Instrumentation: Digital display
- Brakes: Wet disc type
- Steering: Hydraulic power steering

Cal-Lift Inc
Mike Marrs: 562-521-1340
13027 Crossroads Parkway South
City of Industry, CA 91746

Get Quote

Get Flyer

City of Industry, CA 91746

562-521-1340

JYC Exports & Imports
20900 NE 30th avenue, Suite 200

2017 Taylor XLS-1000

JYC Exports & Imports

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: XLS-1000
MAST TYPE:: Two Stage
MAST - RAISED:: 288 in
FUEL:: Diesel
SIDESHIFTER:: YES
CAPACITY:: 100000 lbs
PRICE: $450,000 USD

Taylor Log Stacker, 100,000lbs @ 48"

General Information
- Model Number: XLS-1000
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
- Fuel Type: Diesel
Dimensions
- Overall Length: 192 inches
- Overall Width: 88 inches
- Overall Height: 120 inches
- Wheelbase: 115 inches
- Ground Clearance: 12 inches
Weight
- Operating Weight: 30,000 lbs
- Counterweight: 10,000 lbs
Performance
- Load Capacity: 22,000 lbs
- Tilt Angle: +/- 15 degrees
- Travel Speed: 18 mph
- Lift Speed: 80 feet per minute
Engine Specifications
- Engine Type: 4-cylinder turbocharged diesel
- Engine Output: 125 HP
- Fuel Tank Capacity: 50 gallons
Tires
- Front Tires: Pneumatic 28x12
- Rear Tires: Pneumatic 28x12
Hydraulics
- Hydraulic System Pressure: 2500 psi
- Hydraulic Flow Rate: 35 gallons per minute
Forks
- Fork Length: Varies
- Fork Width: 8 inches
- Fork Thickness: 2 inches
Brakes
- Braking System: Wet Disc
- Parking Brake: Mechanical
Operational Features
- Steering: Power Steering
- Operator Seat: Adjustable with Suspension
- Control Type: Hydraulic Joystick
Electrical
- Voltage: 24V
- Alternator Output: 80 Amps
- Lighting: LED

JYC Exports & Imports
Juan Cordoba: 954-758-7165
20900 NE 30th avenue, Suite 200
Aventura, FL 33180

Get Quote

Get Flyer

Finance at $9683/mo

NOTIFY ME

Aventura, FL 33180

954-758-7165

JYC Exports & Imports
20900 NE 30th avenue, Suite 200

1980 Taylor TYLS900

JYC Exports & Imports

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: TYLS900
MAST TYPE:: Two Stage
MAST - RAISED:: 252 in
FUEL:: Diesel
SIDESHIFTER:: YES
CAPACITY:: 85000 lbs
PRICE: CALL FOR PRICE

TYLS900, 85,000lbs

Model: TYLS900
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel

Dimensions and Weight:
- Overall Length: Approximately 190-240 inches, depending on model configuration
- Overall Width: Approximately 104 inches
- Overall Height (top of cab): Approximately 124 inches
- Wheelbase: Approximately 140 inches
- Ground Clearance: Approximately 13 inches
- Total Weight: Approximately 80,000 lbs

Capacity:
- Load Capacity: 90,000 lbs

Performance:
- Travel Speed: Approximately 18-19 mph
- Gradeability: Up to 24%
- Turning Radius: Approximately 23-25 ft

Engine and Powertrain:
- Engine Type: Diesel Engine
- Engine Power: Approximately 300-330 HP
- Transmission: Powershift Transmission
- Number of Speeds: 3 Forward / 3 Reverse
- Tires: Pneumatic

Hydraulic System:
- Hydraulic Reservoir Capacity: Approximately 70 gallons

Interior/Operator Station:
- Cab: Enclosed with A/C and Heater
- Seat: Adjustable with Suspension
- Controls: Ergonomic Control Layout

JYC Exports & Imports
Juan Cordoba: 954-758-7165
20900 NE 30th avenue, Suite 200
Aventura, FL 33180

Get Quote

Get Flyer

NOTIFY ME TEXT SELLER MORE FROM SELLER

Aventura, FL 33180

954-758-7165

NOTIFY ME TEXT SELLER MORE FROM SELLER DEALER WEBSITE

2003 Taylor THDC974

Intermodal Supply, LLC

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 103
MAKE:: Taylor
MODEL:: THDC974
MAST TYPE:: Two Stage
MAST - RAISED:: 4 in
FUEL:: Diesel
SIDESHIFTER:: YES
CAPACITY:: 95000 lbs
PRICE: CALL FOR PRICE

Taylor THDC974 Container Handlers, x3 Machines Available!

General Information
- Model Number: THDC974
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Container Handlers (Loaded/Empty)
- Fuel Type: Diesel
Dimensions
- Overall Width: Approximately 12 feet (varies)
- Overall Length: Ranges with model variants
- Overall Height: Approximately 15 feet (varies)
- Wheelbase: Approximately 16 feet
- Ground Clearance: Approximately 1.5 feet
Performance
- Engine Power: Around 450 hp
- Load Capacity: Approximately 97,000 lbs
- Turning Radius: Approximately 35 feet
- Speed: Forward - Approximately 20 mph
- Speed: Reverse - Approximately 20 mph
Tires
- Tire Type: Pneumatic
- Tire Size: Front - 18.00 x 25, Rear - 18.00 x 25
Fuel and Capacity
- Fuel Capacity: Approximately 200 gallons
Hydraulic System
- Hydraulic Tank Capacity: Approximately 110 gallons
Cab Features
- Features: Ergonomic Design, AC/Heating Option, Adjustable Seat
- Visibility: Enhanced with rear-view mirrors and cameras

Intermodal Supply, LLC
David English: 910-338-3667
609-A Piner Rd. Suite 159
Wilmington, NC 28409

Get Quote

Get Flyer

Intermodal Supply, LLC
609-A Piner Rd. Suite 159

Wilmington, NC 28409

910-338-3667

2017 Taylor XH360L

Carolina-Georgia Services Company

Buy or Rent

DETAILS

SPECS

CONTACT

STK#:: CGS25-0129b--EL
MAKE:: Taylor
MODEL:: XH360L
MAST TYPE:: Two Stage
MAST - RAISED:: 180 in
FUEL:: Diesel
HOURS:: 13280 Hrs
SIDESHIFTER:: YES
CAPACITY:: 36000 lbs
PRICE: CALL FOR PRICE

Model Number: XH360L
Manufacturer: Taylor
Type: Forklift
Subtype: Rough Terrain (Vertical Mast)
Dimensions
- Overall Length: 20 feet
- Overall Width: 8 feet
- Overall Height: 11.5 feet
- Wheelbase: 14 feet
Weight
- Operating Weight: 72,000 lbs
Engine
- Engine Type: Diesel
- Engine Power: 300 HP
Performance
- Rated Load Capacity: 36,000 lbs
- Travel Speed: 19 mph
Tires
- Tire Type: Pneumatic
- Tire Size (front): 18.00-25
- Tire Size (rear): 18.00-25
Hydraulic System
- Hydraulic Pressure: 3,500 psi
- Pump Type: Gear
Brakes
- Service Brakes: Wet Disc
- Parking Brakes: Spring-applied hydraulic release

Carolina-Georgia Services Company
Larry Jenkins: 404-531-7680
4201 Elizabeth St NE
Covington, GA 30014-2850

Get Quote

Get Flyer

Carolina-Georgia Services Company
4201 Elizabeth St NE

Covington, GA 30014-2850

404-531-7680

2017 Taylor XH360L

Carolina-Georgia Services Company

Buy or Rent

DETAILS

SPECS

CONTACT

STK#:: CGS25-0129aEL
MAKE:: Taylor
MODEL:: XH360L
MAST TYPE:: Two Stage
MAST - RAISED:: 180 in
FUEL:: Diesel
HOURS:: 17280 Hrs
SIDESHIFTER:: YES
CAPACITY:: 36000 lbs
PRICE: CALL FOR PRICE

Model Number: XH360L
Manufacturer: Taylor
Type: Forklift
Subtype: Rough Terrain (Vertical Mast)
Dimensions
- Overall Length: 20 feet
- Overall Width: 8 feet
- Overall Height: 11.5 feet
- Wheelbase: 14 feet
Weight
- Operating Weight: 72,000 lbs
Engine
- Engine Type: Diesel
- Engine Power: 300 HP
Performance
- Rated Load Capacity: 36,000 lbs
- Travel Speed: 19 mph
Tires
- Tire Type: Pneumatic
- Tire Size (front): 18.00-25
- Tire Size (rear): 18.00-25
Hydraulic System
- Hydraulic Pressure: 3,500 psi
- Pump Type: Gear
Brakes
- Service Brakes: Wet Disc
- Parking Brakes: Spring-applied hydraulic release

Carolina-Georgia Services Company
Larry Jenkins: 404-531-7680
4201 Elizabeth St NE
Covington, GA 30014-2850

Get Quote

Get Flyer

Carolina-Georgia Services Company
4201 Elizabeth St NE

Covington, GA 30014-2850

404-531-7680

2023 Taylor GT50

Hamre Equipment Co. Inc.

New

DETAILS

SPECS

CONTACT

FINANCE

STK#:: HE 4142
MAKE:: Taylor
MODEL:: GT50
MAST TYPE:: Three Stage
FUEL:: LP Gas
HOURS:: 1.6 Hrs
SIDESHIFTER:: YES
PRICE: $38,157 USD

General Specifications
- Model Number: GT50
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
Dimensions
- Overall Length: Approx. 158 inches
- Width: Approx. 73 inches
- Height: Approx. 92 inches (to top of overhead guard)
- Wheelbase: Approx. 96 inches
Performance
- Load Capacity: 11,000 lbs
- Travel Speed: Approx. 12 mph (without load)
- Turning Radius: Approx. 134 inches
Powertrain
- Engine Type: Diesel
- Horsepower: Approx. 110 HP
- Transmission: Power Shift
Tires
- Type: Pneumatic
- Front Tire Size: Approx. 8.25 x 15
- Rear Tire Size: Approx. 8.25 x 15
Forks
- Fork Length: Varies
- Carriage Type: ITA Class III
Operator Station
- Seating Capacity: 1
- Seat Type: Adjustable, with suspension
- Steering: Power Assisted
- Controls: Hydraulic Levers

Hamre Equipment Co. Inc.
Lee Hamre: 530-918-4445
3930 Esplanade
Chico, CA 95973

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $828/mo

Hamre Equipment Co. Inc.
3930 Esplanade

Chico, CA 95973

530-918-4445

2023 Taylor GT50

Hamre Equipment Co. Inc.

New

DETAILS

SPECS

CONTACT

FINANCE

STK#:: HE 4141
MAKE:: Taylor
MODEL:: GT50
MAST TYPE:: Three Stage
FUEL:: LP Gas
HOURS:: 1.9 Hrs
SIDESHIFTER:: YES
PRICE: $38,157 USD

General Specifications
- Model Number: GT50
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
Dimensions
- Overall Length: Approx. 158 inches
- Width: Approx. 73 inches
- Height: Approx. 92 inches (to top of overhead guard)
- Wheelbase: Approx. 96 inches
Performance
- Load Capacity: 11,000 lbs
- Travel Speed: Approx. 12 mph (without load)
- Turning Radius: Approx. 134 inches
Powertrain
- Engine Type: Diesel
- Horsepower: Approx. 110 HP
- Transmission: Power Shift
Tires
- Type: Pneumatic
- Front Tire Size: Approx. 8.25 x 15
- Rear Tire Size: Approx. 8.25 x 15
Forks
- Fork Length: Varies
- Carriage Type: ITA Class III
Operator Station
- Seating Capacity: 1
- Seat Type: Adjustable, with suspension
- Steering: Power Assisted
- Controls: Hydraulic Levers

Hamre Equipment Co. Inc.
Lee Hamre: 530-918-4445
3930 Esplanade
Chico, CA 95973

FINANCING

Get Quote

Get Flyer

Finance at $828/mo

Hamre Equipment Co. Inc.
3930 Esplanade

Chico, CA 95973

530-918-4445

JYC Exports & Imports
20900 NE 30th avenue, Suite 200

2020 Taylor X500MR

JYC Exports & Imports

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: X500MR
MAST TYPE:: Two Stage
MAST - LOWERED:: 197 in
MAST - RAISED:: 216 in
FUEL:: Diesel
HOURS:: 10727 Hrs
SIDESHIFTER:: YES
CAPACITY:: 50000 lbs
PRICE: CALL FOR PRICE

50k Cap @ 50" LC, 18ft Ultraview mast, S/S, F/P, 100" forks

General Information

Model Number: X500MR
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel

Engine Specifications

Engine Type: Diesel Engine
Rated Power: 150 HP
Displacement: 350 cubic inches
Cooling System: Liquid Cooled

Dimensions

Overall Length: 225 inches
Overall Width: 90 inches
Overall Height: 120 inches
Wheelbase: 130 inches
Ground Clearance: 8 inches

Capacity

Load Capacity: 22,000 pounds
Operating Weight: 33,000 pounds
Fuel Tank Capacity: 50 gallons
Hydraulic System Capacity: 30 gallons

Performance

Travel Speed: 25 mph
Lifting Speed: 70 feet per minute
Lowering Speed: 65 feet per minute

Tires

Front Tires: 12.00 x 20 Pneumatic
Rear Tires: 12.00 x 20 Pneumatic

Other Specifications

Steering Type: Hydraulic Power Steering
Braking System: Wet Disc Brakes
Transmission Type: Powershift

JYC Exports & Imports
Juan Cordoba: 954-758-7165
20900 NE 30th avenue, Suite 200
Aventura, FL 33180

Get Quote

Get Flyer

NOTIFY ME TEXT SELLER MORE FROM SELLER

Aventura, FL 33180

954-758-7165

NOTIFY ME TEXT SELLER MORE FROM SELLER DEALER WEBSITE

1975 Taylor Y80WO

Dan Dimond Equipment

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: IP800-733
MAKE:: Taylor
MODEL:: Y80WO
MAST TYPE:: Two Stage
MAST - LOWERED:: 165 in
MAST - RAISED:: 136 in
FUEL:: Diesel
HOURS:: 7252 Hrs
SIDESHIFTER:: NO
CAPACITY:: 80000 lbs
PRICE: CALL FOR PRICE

8' FORKS WITH INDEPENDANT POSITIONERS

Model Number: Y80WO
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type Used: Diesel

General Specifications
- Capacity: 8,000 lbs
- Tire Type: Pneumatic
- Batteries: N/A (Diesel Powered)
Dimensions
- Overall Width: Approximately 5 ft 7 in
- Overall Length: Approximately 14 ft 5 in without forks
- Overall Height: Approximately varies depending on cabin and protection
- Wheelbase: Approximately 8 ft 10 in
Engine
- Engine Manufacturer: Diesel Engine
- Power: Varies depending on engine specification
- Cylinder Count: Varies
Performance
- Travel Speed: 14 mph unloaded
- Lift Speed: 95 ft/min unloaded
- Lowering Speed: 100 ft/min unloaded
Brakes
- Service Brake: Hydraulic
- Park Brake: Mechanical
Hydraulics
- Hydraulic System Pressure: Approximately 3,000 psi
- Pump Type: Gear type

Dan Dimond Equipment
Dan: 269-665-1044
835 North M-37 Hwy
Hastings, MI 49058

Get Quote

Get Flyer

Dan Dimond Equipment
835 North M-37 Hwy

Hastings, MI 49058

269-665-1044

2006 Taylor T450S

Dan Dimond Equipment

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: IP450-518
MAKE:: Taylor
MODEL:: T450S
MAST TYPE:: Two Stage
MAST - LOWERED:: 174 in
MAST - RAISED:: 182 in
FUEL:: Diesel
HOURS:: 7100 Hrs
SIDESHIFTER:: YES
CAPACITY:: 45000 lbs
PRICE: $119,000 USD

CUMMINS ENGINE, FORK POSITIONERS

Basic Information

Model Number: T450S
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel

Powertrain

Engine Type: Diesel Engine
Transmission: Powershift
Drive: 2-Wheel Drive

Dimensions

Overall Length: 236 inches
Overall Width: 126 inches
Overall Height: 150 inches
Wheelbase: 150 inches
Ground Clearance: Approx 12 inches
Fork Length: Varies

Weight

Operating Weight: Approximately 88,000 lbs

Performance

Load Capacity: 45,000 lbs
Travel Speed: Approximately 18 mph
Lift Speed: Approximately 80 feet per minute

Tires

Tire Type: Pneumatic
Front Tires: 12.00x20
Rear Tires: 12.00x20

Other Features

Power Steering
Enclosed Cab with AC
Adjustable Seat
LED Work Lights

Dan Dimond Equipment
Dan: 269-665-1044
835 North M-37 Hwy
Hastings, MI 49058

Get Quote

Get Flyer

Finance at $2561/mo

Dan Dimond Equipment
835 North M-37 Hwy

Hastings, MI 49058

269-665-1044

1988 Taylor TC450

AHP Enterprises

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: TC450
MAST TYPE:: Two Stage
MAST - RAISED:: 96 in
FUEL:: Diesel
HOURS:: 19354 Hrs
SIDESHIFTER:: YES
CAPACITY:: 45000 lbs
PRICE: $79,500 USD

Great "Rigger" Truck

Manufacturer: Taylor
Model Number: TC450
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel

Dimensions and Weight:

Overall Length: Approximately 21.5 feet
Overall Width: Approximately 8.5 feet
Overall Height (Cab): Approximately 11 feet
Wheelbase: Approximately 12.5 feet
Ground Clearance: Approximately 1.5 feet
Weight: Approximately 90,000 lbs

Engine:

Engine Type: Diesel
Horsepower: Approximately 200 HP

Tires:

Tire Type: Pneumatic
Total Number of Tires: 4

Performance:

Load Capacity: Approximately 45,000 lbs
Travel Speed Loaded: Approximately 15 mph
Travel Speed Unloaded: Approximately 18 mph
Lift Speed Loaded: Approximately 0.6 feet/sec
Lift Speed Unloaded: Approximately 0.7 feet/sec

Operational:

Operator Type: Sit Down
Steering: Hydraulic power steering
Fork Length: Varies

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

Finance at $1711/mo

1978 Taylor TY620L

AHP Enterprises

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: TY620L
MAST TYPE:: Two Stage
MAST - LOWERED:: 160 in
MAST - RAISED:: 132 in
FUEL:: Diesel
CAPACITY:: 62000 lbs
PRICE: $84,500 USD

As-Is - Running Condition

General Information

Manufacturer: Taylor
Model Number: TY620L
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel

Dimensions

Overall Length: Approx. 227 inches
Overall Width: Approx. 108 inches
Overall Height: Approx. 114 inches
Wheelbase: Approx. 147 inches

Weight

Total Weight: Approx. 85,000 lbs

Performance

Rated Load Capacity: Approx. 62,000 lbs
Drive Speed: Approx. 20 mph

Engine

Engine Type: Diesel Engine
Horsepower: Approx. 300 hp

Chassis

Tire Type: Pneumatic

Operational

Steering Type: Hydraulic Power Steering
Braking System: Wet Disc Brakes

Transmission

Transmission Type: Powershift Transmission

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

Finance at $1818/mo

1978 Taylor TY620L

AHP Enterprises

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: TY620L
MAST TYPE:: Two Stage
MAST - LOWERED:: 160 in
MAST - RAISED:: 132 in
FUEL:: Diesel
CAPACITY:: 62000 lbs
PRICE: $84,500 USD

As-Is - Running Condition

General Information

Manufacturer: Taylor
Model Number: TY620L
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel

Dimensions

Overall Length: Approx. 227 inches
Overall Width: Approx. 108 inches
Overall Height: Approx. 114 inches
Wheelbase: Approx. 147 inches

Weight

Total Weight: Approx. 85,000 lbs

Performance

Rated Load Capacity: Approx. 62,000 lbs
Drive Speed: Approx. 20 mph

Engine

Engine Type: Diesel Engine
Horsepower: Approx. 300 hp

Chassis

Tire Type: Pneumatic

Operational

Steering Type: Hydraulic Power Steering
Braking System: Wet Disc Brakes

Transmission

Transmission Type: Powershift Transmission

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

Finance at $1818/mo

Heavy Lift Sales, Rentals & Leasing
1967 Wehrle Dr.

2006 Taylor T300S

Heavy Lift Sales, Rentals & Leasing

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 5333548
MAKE:: Taylor
MODEL:: T300S
MAST TYPE:: Two Stage
MAST - LOWERED:: 143 in
MAST - RAISED:: 130 in
FUEL:: Diesel
SIDESHIFTER:: YES
CAPACITY:: 30000 lbs
PRICE: CALL FOR PRICE

30,000 lb. Capacity, 143/130 STD, 56" Forks-SS

Model Number: T300S
Manufacturer: Taylor
Type: Forklift
Fuel Type Used: LP Gas

Engine:
- Engine Type: Internal Combustion
- Fuel System: Liquid Propane Gas
- Power: Approximately 100 hp (Horsepower)
Dimensions:
- Overall Length (without forks): 160 inches
- Overall Width: 78 inches
- Overall Height (cab): 120 inches
- Wheelbase: 100 inches
Performance:
- Load Capacity: 30,000 lbs (Pounds)
- Travel Speed (loaded): 15 mph
- Travel Speed (unloaded): 16 mph
Tires:
- Front Tires: Pneumatic
- Rear Tires: Pneumatic
- Front Tire Size: 12.00 x 20
- Rear Tire Size: 10.00 x 20
Brakes:
- Service Brake: Hydraulic
- Parking Brake: Hand-operated
Operators Compartment:
- Steering: Power Steering
- Seat: Adjustable ergonomic seat with seatbelt
- Instrumentation: Multi-function display panel
Hydraulic System:
- Pump Type: Gear pump
- Hydraulic Pressure: 2500 psi
- Hydraulic Flow: 60 gpm (gallons per minute)
Additional Features:
- Standard Fork Length: Varies
- Lighting: Full lighting package including headlights and taillights
- Operator Protection: Overhead guard and load backrest

Heavy Lift Sales, Rentals & Leasing
Sales Department: 716-221-2022
1967 Wehrle Dr.
Buffalo, NY 14221

Get Quote

Get Flyer

Buffalo, NY 14221

716-221-2022

Heavy Lift Sales, Rentals & Leasing
1967 Wehrle Dr.

2008 Taylor TCO300S

Heavy Lift Sales, Rentals & Leasing

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 5335071
MAKE:: Taylor
MODEL:: TCO300S
MAST TYPE:: Two Stage
MAST - RAISED:: 99 in
FUEL:: Diesel
CAPACITY:: 30000 lbs
PRICE: CALL FOR PRICE

30,000 lb. Capacity, STD Lift 99", 48" forks, cab

General Specifications
- Model Number: TCO300S
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
- Fuel Type: Diesel
Dimensions
- Overall Length: Approximately 161 inches
- Overall Width: Approximately 56 inches
- Overall Height: Approximately 94 inches
- Wheelbase: Approximately 80 inches
- Ground Clearance: Approximately 5 inches
- Turning Radius: Approximately 75 inches
Capacity
- Load Capacity: 6,000 lbs
Performance
- Travel Speed: 12 mph
- Lifting Speed: 100 feet per minute
- Lowering Speed: 95 feet per minute
Powertrain
- Engine Type: Diesel
- Transmission Type: Powershift
- Cylinder Count: Inline-4
Tires
- Tire Type: Cushion
- Tire Count: 4 (2 front, 2 rear)
Fork Specifications
- Fork Length: Varies
Additional Features
- Hydraulic System
- Ergonomic Operator Seat
- Standard Safety Features

Heavy Lift Sales, Rentals & Leasing
Sales Department: 716-221-2022
1967 Wehrle Dr.
Buffalo, NY 14221

Get Quote

Get Flyer

Buffalo, NY 14221

716-221-2022

Heavy Lift Sales, Rentals & Leasing
1967 Wehrle Dr.

2008 Taylor TCO300S

Heavy Lift Sales, Rentals & Leasing

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 5335072
MAKE:: Taylor
MODEL:: TCO300S
MAST TYPE:: Two Stage
MAST - RAISED:: 99 in
FUEL:: Diesel
CAPACITY:: 30000 lbs
PRICE: CALL FOR PRICE

30,000 lb. Capacity, STD Lift 99", Rotator, 48" forks, cab

General Specifications
- Model Number: TCO300S
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
- Fuel Type: Diesel
Dimensions
- Overall Length: Approximately 161 inches
- Overall Width: Approximately 56 inches
- Overall Height: Approximately 94 inches
- Wheelbase: Approximately 80 inches
- Ground Clearance: Approximately 5 inches
- Turning Radius: Approximately 75 inches
Capacity
- Load Capacity: 6,000 lbs
Performance
- Travel Speed: 12 mph
- Lifting Speed: 100 feet per minute
- Lowering Speed: 95 feet per minute
Powertrain
- Engine Type: Diesel
- Transmission Type: Powershift
- Cylinder Count: Inline-4
Tires
- Tire Type: Cushion
- Tire Count: 4 (2 front, 2 rear)
Fork Specifications
- Fork Length: Varies
Additional Features
- Hydraulic System
- Ergonomic Operator Seat
- Standard Safety Features

Heavy Lift Sales, Rentals & Leasing
Sales Department: 716-221-2022
1967 Wehrle Dr.
Buffalo, NY 14221

Get Quote

Get Flyer

Buffalo, NY 14221

716-221-2022

2000 Taylor THD 300 M

AHP Enterprises

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: THD 300 M
MAST TYPE:: Two Stage
MAST - RAISED:: 15 in
FUEL:: Diesel
HOURS:: 7490 Hrs
SIDESHIFTER:: YES
CAPACITY:: 30000 lbs
PRICE: $84,500 USD

Taylor THD 300M 15’ mast SS FP New paint/ Decals

General Specifications
- Model Number: THD 300 M
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
- Fuel Type: Diesel
Dimensions
- Overall Length: 217 inches
- Overall Width: 100 inches
- Overall Height: 157 inches
- Wheelbase: 120 inches
- Ground Clearance: 13 inches
- Fork Length: Varies
Performance
- Load Capacity: 66,000 lbs
- Tilt Angle: 10° forward / 5° backward
- Travel Speed: 20 mph
- Gradeability: 25%
Engine
- Engine Model: Perkins 2806
- Power Output: 300 HP
- Rated RPM: 2200 RPM
- Torque: 1,100 lb-ft
- Cylinder Count: 6
- Fuel Capacity: 150 gallons
Chassis and Tires
- Tire Type: Pneumatic
- Tire Size (Front): 16.00 R25
- Tire Size (Rear): 14.00 R24
- Steering: Power Steering
- Brakes: Wet Disc Brakes
Hydraulics
- Hydraulic System Pressure: 3,500 psi
- Hydraulic Tank Capacity: 90 gallons
Operator Features
- Cab Type: Enclosed with AC
- Seating: Adjustable suspension seat
- Controls: Ergonomic levers and pedals
- Display: Multi-function digital display
Weight
- Operating Weight: 94,000 lbs

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

Finance at $1818/mo

2006 Taylor 9975C

K.T. Graham Inc.

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: 9975C
MAST TYPE:: Telescopic
FUEL:: Diesel
CAPACITY:: 99700 lbs
PRICE: $135,000 USD

General Information
- Model Number: 9975C
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Container Handlers (Loaded/Empty)
- Fuel Type: Diesel
Engine and Powertrain
- Engine Type: Diesel Engine
- Transmission: Powershift Transmission
- Drive Configuration: 4x2 or 4x4 (varies by model)
Dimensions
- Overall Length: Approximately 37-40 feet (varies based on configuration and attachments)
- Overall Width: About 12 feet
- Wheelbase: Approximately 20-22 feet
- Ground Clearance: Roughly 1.5 feet
Performance
- Rated Load Capacity: 99,000 pounds
- Travel Speed (Loaded): Up to 21 mph
- Travel Speed (Unloaded): Up to 24 mph
- Turning Radius: Approximately 28 feet
- Fuel Tank Capacity: Around 160 gallons
Operational Features
- Brake System: Wet Disc Brakes
- Steering: Articulated Power Steering
- Hydraulic System: Load-sensing hydraulic system
Cab Features
- Operator Seat: Adjustable with suspension
- Controls: Joystick control for lift and tilt functions
- Cabin: Soundproof and climate-controlled
Safety Features
- Load Sensing and Height Monitoring Systems
- Reverse Alarm
- LED Work Lights
- Emergency Stop Buttons

K.T. Graham Inc.
Keith Graham: 717-647-5577
137 S Front St
Columbia, PA 17512

Get Quote

Get Flyer

Finance at $2905/mo

K.T. Graham Inc.
137 S Front St

Columbia, PA 17512

717-647-5577

2002 Taylor TE4030

AHP Enterprises

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: *SOLD*
MAKE:: Taylor
MODEL:: TE4030
MAST TYPE:: Two Stage
FUEL:: Diesel
CAPACITY:: 40000 lbs
PRICE: $195,000 USD

Cummins QSB6. 7-160 Tier III, Elec Turbo Charged Engine,CALL

General Information

Model Number: TE4030
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel

Powertrain

Engine Type: Diesel Engine
Horsepower: Approximately 100 HP
Transmission: Powershift

Dimensions

Overall Length: Approximately 206 inches
Overall Width: Approximately 92 inches
Overall Height (top of overhead guard): Approximately 116 inches
Wheelbase: Approximately 116 inches
Ground Clearance: Approximately 10 inches

Capacity

Load Capacity: Approximately 30,000 lbs

Performance

Maximum Travel Speed: Approximately 18 mph
Drawbar Pull: Approximately 18,000 lbs

Tires

Tire Type: Pneumatic
Front Tires: Approximately 10.00-20
Rear Tires: Approximately 10.00-20

Brakes

Service Brake: Hydraulic
Parking Brake: Manual

Forks

Fork Length: Varies
Fork Width: Approximately 8 inches

Operation

Operator Position: Sit Down
Steering: Power Steering

Features

Adjustable Steering Column
Operator Presence System
Hydraulic Control Levers

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

Finance at $4196/mo

1994 Taylor TEB250M

AHP Enterprises

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: Sold
MAKE:: Taylor
MODEL:: TEB250M
MAST TYPE:: Two Stage
FUEL:: Diesel
CAPACITY:: 25000 lbs
PRICE: $35,000 USD

180" MFH, 160" OHL, 96" Forks, Taylor "A" Carriage

**General Specifications** - Model Number: TEB250M - Manufacturer: Taylor - Type: Forklift - Subtype: Rough Terrain (Vertical Mast) - Power Source: Diesel Engine **Dimensions** - Overall Length: 210 inches - Overall Width: 98 inches - Overall Height (Cab): 130 inches - Ground Clearance: 19 inches - Wheelbase: 130 inches **Performance** - Engine Type: Turbocharged Diesel - Engine Power: 225 HP - Transmission Type: Powershift - Turning Radius: 180 inches - Travel Speed (Loaded): 18 mph - Travel Speed (Unloaded): 22 mph **Capacity** - Load Capacity: 55,000 lbs - Drawbar Pull: 50,000 lbs **Tires** - Type: Pneumatic - Front Tire Size: 23.5-25 - Rear Tire Size: 23.5-25 **Brake System** - Service Brake Type: Wet Disc - Parking Brake Type: Hand-Operated, Mechanical **Hydraulic System** - Hydraulic Tank Capacity: 105 gallons - System Pressure: 3,000 psi **Operator Features** - Cabin Type: Enclosed with AC - Seat Type: Adjustable Suspension Seat - Control: Multi-Function Joystick **Forks** - Fork Length: Varies - Fork Type: Adjustable/Replaceable

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

Finance at $762/mo

NOTIFY ME

1996 Taylor TE300S

AHP Enterprises

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 24
MAKE:: Taylor
MODEL:: TE300S
MAST TYPE:: Two Stage
MAST - RAISED:: 216 in
FUEL:: Diesel
CAPACITY:: 30000 lbs
PRICE: $55,000 USD

Cummins, Cab w/ A/C & heat, great tires, great truck!

General Information
- Model Number: TE300S
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Rough Terrain (Vertical Mast)
- Fuel Type: LP Gas
Dimensions
- Overall Length: 18.5 feet
- Overall Width: 8 feet
- Overall Height (Overhead Guard): 10 feet
- Wheelbase: 10 feet
Weight
- Operating Weight: 31,000 lbs
Performance
- Load Capacity: 30,000 lbs
- Travel Speed: 18 mph (unladen)
- Turning Radius: 15 feet
Engine
- Engine Type: LP Gas
- Engine Model: PSI 8.8L
- Power Output: 250 HP
Transmission
- Type: Powershift
- Speeds: 3 Forward / 3 Reverse
Tires
- Front Tires: 16.00 x 25 wide profile
- Rear Tires: 16.00 x 25 wide profile
Brakes
- Service Brakes: Wet disc
- Parking Brake: Spring Applied, Hydraulic Released (SAHR)
Forks
- Fork Length: Varies

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

Finance at $1183/mo

NOTIFY ME

1996 Taylor TE360L

AHP Enterprises

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: TE360L
MAST TYPE:: Two Stage
MAST - RAISED:: 180 in
FUEL:: Diesel
SIDESHIFTER:: YES
CAPACITY:: 36000 lbs
PRICE: CALL FOR PRICE

24" LC, 180" MFH, 160" OHL, 96" Forks, SS, Cab with heat

Basic Information
- Model Number: TE360L
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire, 4 Wheel Sit Down
Engine
- Engine Type: Diesel
- Horsepower: Approximately 350 HP
Dimensions
- Overall Width: Approximately 10 feet
- Overall Length: Roughly varies, specific to configuration
- Overall Height: Typically around 11 feet without mast
- Wheelbase: About 12 feet
Weight
- Operating Weight: Approximately 90,000 lbs
Tires
- Tire Type: Pneumatic
- Tire Size Front: Typically 18 x 25 inches
- Tire Size Rear: About 18 x 25 inches
Performance
- Maximum Lift Capacity: Around 36,000 lbs
- Travel Speed (Full Load): Approximately 15 mph
- Lift Speed (Full Load): Around 60 feet/minute
Hydraulic System
- Hydraulic Tank Capacity: Approximately 70 gallons
- System Pressure: Typically 3,500 psi
Fuel System
- Fuel Tank Capacity: Approximately 200 gallons
Operator Comfort
- Seat: Adjustable with Suspension
- Cab Features: Climate control, Ergonomic controls, Clear visibility

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

NOTIFY ME TEXT SELLER MORE FROM SELLER

2002 Taylor THD250S

Forklifts Parts & Equipment

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: THD250S
MAST TYPE:: Two Stage
MAST - LOWERED:: 147 in
MAST - RAISED:: 180 in
FUEL:: Diesel
SIDESHIFTER:: YES
CAPACITY:: 25000 lbs
PRICE: $68,000 USD

RECONDITIONED 2002 TAYLOR THD250S WITH ENCLOSE CABIN

General Information

Manufacturer: Taylor
Model Number: THD250S
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel

Dimensions

Overall Length: Approximately 240 inches
Overall Width: Approximately 108 inches
Overall Height: Approximately 120 inches
Wheelbase: Approximately 150 inches
Ground Clearance: Approximately 12 inches

Performance

Load Capacity: 55,000 lbs
Travel Speed: 21 mph
Gradeability: 27%

Engine

Engine Model: Cummins QSB6.7
Engine Power: 173 hp
Cylinders: 6
Fuel Tank Capacity: 100 gallons

Tires

Tire Type: Pneumatic

Hydraulic System

Hydraulic Flow Rate: 60 gallons per minute

Forks

Fork Length: Varies

Operator Environment

Cabin: Enclosed
Controls: Finger-tip controls
Seat: Adjustable with suspension

Forklifts Parts & Equipment
Arturo: 786-475-8799
7695 NW 63 St.
Miami, FL 33166

Get Quote

Get Flyer

Finance at $1463/mo

NOTIFY ME TEXT SELLER MORE FROM SELLER DEALER WEBSITE

Taylor

AHP Enterprises

Used

DETAILS

CONTACT

MAKE:: Taylor
MAST TYPE:: Two Stage
FUEL:: Diesel
SIDESHIFTER:: NO
PRICE: CALL FOR PRICE

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

2000 Taylor THD 300

AHP Enterprises

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: THD 300
MAST TYPE:: Two Stage
MAST - RAISED:: 216 in
FUEL:: Diesel
SIDESHIFTER:: YES
CAPACITY:: 30000 lbs
PRICE: $69,500 USD

30000 lb capacity, 18' mast with s/s and fp, 8' foks , cab

General Specifications
- Model Number: THD 300
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
- Fuel Type: Diesel
Engine
- Fuel Type: Diesel
- Engine Power: Varies based on engine model
Dimensions
- Overall Length: Approximately 292 inches (varies based on configuration)
- Overall Width: Approximately 134 inches
- Overall Height: Approximately 148 inches
- Wheelbase: Approximately 154 inches
- Ground Clearance: Varies by configuration
- Tire Size (Front/Rear): Varies by model
Performance
- Load Capacity: 60,000 lbs
- Travel Speed: Varies based on load and conditions
- Lifting Speed: Varies based on load
- Gradeability: Varies based on load and configuration
Operational Data
- Operator Seat: Sit Down
- Steering: Power Steering
- Brakes: Air Brakes
- Transmission: Automatic
Forks
- Fork Length: Varies
Additional Features
- Safety Features: Equipped with standard safety features
- Cabin: Enclosed or Open depending on configuration
- Hydraulic System: Varies based on model

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

Finance at $1496/mo

2008 Taylor T300M

Forklifts Parts & Equipment

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: T300M
MAST TYPE:: Two Stage
MAST - RAISED:: 161 in
FUEL:: Diesel
CAPACITY:: 30000 lbs
PRICE: $1 USD

CAB & A/C CUMMINS DIESEL TURBO 6 CYLS. AUTO TRANS. 3 SP

Manufacturer: Taylor
Model Number: T300M
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Power Source: Diesel

Performance

Rated Capacity: 30,000 lbs
Travel Speed (unloaded): Up to 17 mph
Load Center: 24 inches
Turning Radius: 170 inches

Dimensions

Overall Width: 120 inches
Overall Length: 220 inches
Overall Height: 130 inches

Weights

Operating Weight: 50,000 lbs

Tires

Tire Type: Pneumatic
Front Tire Size: 10.00 x 20
Rear Tire Size: 10.00 x 20

Engine

Engine Make: Cummins
Engine Type: QSB6.7
Horsepower: 225 HP
Fuel Capacity: 100 gallons

Transmission

Transmission Type: Powershift
Number of Gears: 3 Forward / 3 Reverse

Forklifts Parts & Equipment
Arturo: 786-475-8799
7695 NW 63 St.
Miami, FL 33166

Get Quote

Get Flyer

Finance at $0/mo

1998 Taylor TEC155

Forklifts Parts & Equipment

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: TEC155
MAST TYPE:: Two Stage
MAST - RAISED:: 5 in
FUEL:: Diesel
CAPACITY:: 16 lbs
PRICE: $1 USD

CUMMINS DIESEL TURBO 6 CYLS.3 SPEED AUTOMATIC. 5 CONTAINER

General Information
- Model Number: TEC155
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
- Fuel Type Used: Diesel
Dimensions
- Length to Fork Face: Roughly varies
- Overall Width: Approx. 8 feet
- Height to Top of Overhead Guard: Approx. 10 feet
- Overall Length: Roughly varies
- Wheelbase: Approx. 10 feet
- Ground Clearance: Roughly 9 inches
Weight
- Operating Weight: Approx. 30,000 lbs
Engine
- Engine Type: Diesel
- Horsepower: Varies, typically around 150-200 HP
- Torque: Approx. varies based on model specifics
Performance
- Load Capacity: Approximately 15,000 lbs
- Travel Speed: Approx. 20 mph, unloaded
- Gradeability: Varies based on conditions and load
Tires and Wheels
- Tire Type: Pneumatic
- Front Tire Size: Typically varies
- Rear Tire Size: Typically varies
Operational
- Steering: Hydraulic power steering
- Brakes: Wet disc brakes
- Operator Control: Sit down with ergonomic controls
Forks and Carriage
- Fork Length: Varies
- Carriage Width: Usually varies
- Side Shift: Generally featured

Forklifts Parts & Equipment
Arturo: 786-475-8799
7695 NW 63 St.
Miami, FL 33166

Get Quote

Get Flyer

Finance at $0/mo

1992 Taylor TYC920L

Forklifts Parts & Equipment

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: TYC920L
MAST TYPE:: Two Stage
MAST - RAISED:: 3 in
FUEL:: Diesel
HOURS:: 7200 Hrs
CAPACITY:: 92 lbs
PRICE: $99,500 USD

3 HIGH CONTAINER NEW PAINT 4 NEW FRONT TIRES 7200 HRS.ORG.

General Specifications
- Model Number: TYC920L
- Manufacturer: Taylor
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
Dimensions
- Overall Length: Approximately 200 inches (varies with fork length)
- Overall Width: Approximately 102 inches
- Overall Height: Approximately 130 inches
- Wheelbase: Approximately 125 inches
- Ground Clearance: Approximately 12 inches
Weights
- Operating Weight: Approximately 56,000 lbs
Engine
- Engine Type: Diesel
- Horsepower: Approximately 250 HP
- Cylinder Count: 6
Performance
- Load Capacity: Approximately 20,000 lbs
- Travel Speed Loaded: Approximately 20 mph
- Lift Speed Loaded: Approximately 75 feet/minute
- Drawbar Pull: Approximately 30,000 lbs
Chassis
- Tire Type: Pneumatic
- Tire Size Front: Approximately 12.00 x 20
- Tire Size Rear: Approximately 12.00 x 20
Options
- Cab Options: Open or Enclosed
- Attachments: Varies by Application

Forklifts Parts & Equipment
Arturo: 786-475-8799
7695 NW 63 St.
Miami, FL 33166

Get Quote

Get Flyer

Finance at $2141/mo

Taylor ty520m

Forklifts Parts & Equipment

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: ty520m
MAST TYPE:: Two Stage
MAST - LOWERED:: 14 in
MAST - RAISED:: 24 in
FUEL:: Diesel
CAPACITY:: 56000 lbs
PRICE: $120,500 USD

reconditioned f/p 96" forks,new paint, battries & tires

Manufacturer: Taylor
Model Number: TY520M
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel

Dimensions and Weight

Overall Length: Varies (excluding forks)
Overall Width: Approximately 8 feet (96 inches)
Overall Height: Approximately 11 feet (132 inches)
Wheelbase: Approximately 10 feet (120 inches)
Operating Weight: Approximately 62,000 pounds

Engine Specifications

Engine Make: Diesel Engine
Engine Model: TBD
Horsepower: Approximately 200 HP
Displacement: Approximately 540 cubic inches

Performance

Lift Capacity: 52,000 pounds
Travel Speed: Approximately 15 MPH
Load Center: 48 inches
Gradeability: Approximately 20%

Tires

Tire Type: Pneumatic
Front Tires: Approximately 12 x 24 inches
Rear Tires: Approximately 12 x 24 inches

Hydraulics

Hydraulic System: TBD
Hydraulic Flow: TBD

Brakes

Brake Type: Wet Disc
Service Brake: Hydraulic Actuated
Parking Brake: Manual

Forklifts Parts & Equipment
Arturo: 786-475-8799
7695 NW 63 St.
Miami, FL 33166

Get Quote

Get Flyer

Finance at $2593/mo

NOTIFY ME TEXT SELLER MORE FROM SELLER DEALER WEBSITE

Taylor

AHP Enterprises

Used

DETAILS

CONTACT

MAKE:: Taylor
MAST TYPE:: Two Stage
FUEL:: Diesel
PRICE: CALL FOR PRICE

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

2004 Taylor THDC954

AHP Enterprises

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Taylor
MODEL:: THDC954
MAST TYPE:: Two Stage
MAST - RAISED:: 4 in
FUEL:: Diesel
HOURS:: 18765 Hrs
SIDESHIFTER:: YES
CAPACITY:: 90000 lbs
PRICE: $205,000 USD

S/S,great running as is. 18765 hours

Manufacturer: Taylor
Model Number: THDC954
Type: Forklift
Subtype: Container Handlers (Loaded/Empty)
Fuel Type: Diesel

Engine Specifications:
- Engine Type: Diesel engine
- Turbocharged for maximum efficiency
- Emission level compliant with recent standards

Dimensions:
- Overall Length: Approximately 39 feet
- Overall Width: Approximately 10 feet
- Overall Height: Approximately 15 feet

Weight:
- Total Operating Weight: Approximately 210,000 lbs

Performance:
- Maximum Lifting Capacity: 95,000 lbs
- Travel Speed: Approximately 18 mph
- Steering: Hydraulic power steering

Chassis:
- Frame Type: Heavy-duty steel construction
- Tire Type: Pneumatic or solid, depending on model customization

Cabin Features:
- Design: Ergonomic, with good visibility
- Climate Control: Available heating and air conditioning options
- Instrumentation: Modern display with real-time diagnostics and performance data

Safety Features:
- Load Sensing System
- Emergency Stop Button
- Stability Control Systems

AHP Enterprises
Arthur Peagler: 912-289-8980
2595 W. Bay St
Savannah, GA 31408

Get Quote

Get Flyer

Finance at $4411/mo