Overview
Spec Sheet
Shipping/Freight
Equipment Description
DIESEL CUMMINS 6 CYLINDER TURBO, STD MAST 178" MAX HEIGHT, SIDE SHIFTE & 60" FORK. NEW PAINT, NEW BATTERIES, NEW PNEUMATIC AIR TIRES, HEADLIGHTS, STROBE LIGHT, BACK-UP ALARM, FULL SERVICES TO ENGINE-TRANSMISSION-STEERING-HYDRAULIC.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Manufacturer: Taylor
    • Model Number: THD250S
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: Approximately 240 inches
    • Overall Width: Approximately 108 inches
    • Overall Height: Approximately 120 inches
    • Wheelbase: Approximately 150 inches
    • Ground Clearance: Approximately 12 inches
  • Performance
    • Load Capacity: 55,000 lbs
    • Travel Speed: 21 mph
    • Gradeability: 27%
  • Engine
    • Engine Model: Cummins QSB6.7
    • Engine Power: 173 hp
    • Cylinders: 6
    • Fuel Tank Capacity: 100 gallons
  • Tires
    • Tire Type: Pneumatic
  • Hydraulic System
    • Hydraulic Flow Rate: 60 gallons per minute
  • Forks
    • Fork Length: Varies
  • Operator Environment
    • Cabin: Enclosed
    • Controls: Finger-tip controls
    • Seat: Adjustable with suspension

2002 Taylor THD250S

pneumatic tire 4 wheel sit down diesel

$68,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Arturo
Phone:

ADDRESS
Forklifts Parts & Equipment
7695 NW 63 St.
MiamiFlorida 33166
ATTRIBUTES
YEAR:
2002
Manufacturer:
MODEL #:
CAPACITY:
25000
FUEL:
MAST TYPE:
MAST HEIGHT:
147 / 180 in
SERIAL #:
******
SIDE SHIFTER:
Yes
CONDITION:
Used
UNIT LOCATION:
Florida [33166]
DESCRIPTION:
RECONDITIONED 2002 TAYLOR THD250S WITH ENCLOSE CABIN
POST DATE:
3/30/2026
Reviews
Useful
Not

The Taylor THD250S forklift is a solid workhorse that I found really impressive during my time using it on the job site. It feels sturdy and the pneumatic tires give it great traction, which I appreciated while navigating the uneven ground. There was this one day when we had a tight deadline, and the speed and power of this diesel model helped us move heavy loads without breaking a sweat. The sit-down design also made it comfortable to operate, allowing for long hours without too much fatigue. Overall, if you're looking for a reliable forklift that can handle the tough stuff, this one won't let you down.



Review by Jake Thompson (1/29/2025)

  • General Information
    • Manufacturer: Taylor
    • Model Number: THD250S
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: Approximately 240 inches
    • Overall Width: Approximately 108 inches
    • Overall Height: Approximately 120 inches
    • Wheelbase: Approximately 150 inches
    • Ground Clearance: Approximately 12 inches
  • Performance
    • Load Capacity: 55,000 lbs
    • Travel Speed: 21 mph
    • Gradeability: 27%
  • Engine
    • Engine Model: Cummins QSB6.7
    • Engine Power: 173 hp
    • Cylinders: 6
    • Fuel Tank Capacity: 100 gallons
  • Tires
    • Tire Type: Pneumatic
  • Hydraulic System
    • Hydraulic Flow Rate: 60 gallons per minute
  • Forks
    • Fork Length: Varies
  • Operator Environment
    • Cabin: Enclosed
    • Controls: Finger-tip controls
    • Seat: Adjustable with suspension
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following