Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
CUMMINS QSM11-C335 T3 ENG, TC36 W/M11 & ELEC SHIFT TRANSMISSION, DUAL OPER CAB FAN, CONSOLE DRINK HOLDER, HEATER/DEFROST, AIR SEAT, 42' MAST, BASIC CAPACITY 95000 LBS @ 48.00" L.C., TIER-3, TWO TO CHOOSE FROM
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General
    • Model Number: THDC975
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Container Handlers (Loaded/Empty)
  • Dimensions
    • Overall Width: Approximately 13 feet
    • Overall Length (less forks): Approximately 30 feet
    • Overall Height: Varies based on configuration
    • Turning Radius: Approximately 25 feet
  • Performance
    • Load Capacity: 97,000 lb
    • Travel Speed (Unloaded): Up to 20 mph
    • Lifting Speed (Loaded): Approximately 50 feet/min
  • Engine
    • Type: Diesel
    • Horsepower: Approximately 365 HP
    • Displacement: Varies
  • Transmission
    • Type: Power Shift
    • Speeds: 3 forward / 3 reverse
  • Tires
    • Type: Pneumatic
    • Front Tire Size: Varies
    • Rear Tire Size: Varies
  • Hydraulic System
    • System Pressure: Approximately 4,500 psi
    • Hydraulic Tank Capacity: Around 70 gallons
  • Fuel System
    • Fuel Tank Capacity: Approximately 180 gallons
  • Brakes
    • Service Brake: Wet Disc
    • Parking Brake: Spring Applied, Hydraulically Released
  • Cab
    • Operator Environment: Ergonomically designed with adjustable seat
    • Controls: Joystick and pedal controls

2010 Taylor THDC975

container handlers (loaded/empty) diesel

$385,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Lee Hamre
Phone:

ADDRESS
Hamre Equipment Co. Inc.
3930 Esplanade
ChicoCalifornia 95973
ATTRIBUTES
STOCK #:
HE 3732
YEAR:
2010
Manufacturer:
MODEL #:
FUEL:
MAST TYPE:
MAST HEIGHT:
504 in
SERIAL #:
S-X2-36122
CONDITION:
Used
UNIT LOCATION:
California [95973]
POST DATE:
6/29/2026
Reviews
Useful
Not

The Taylor THDC975 is one of those machines that makes you appreciate what a solid forklift can do, especially when you're handling containers. A while back, I got the chance to use one at a warehouse, and I was really impressed with its lifting power and stability. It made maneuvering loaded and empty containers a whole lot easier, turning a daunting task into something manageable. The visibility from the operator's seat was surprisingly good, which helped a ton while navigating around tight spaces. Overall, it feels like a dependable workhorse that gets the job done without any fuss. I'd definitely recommend it for anyone needing a reliable container handler.



Review by Jason Thompson (2/5/2025)

  • General
    • Model Number: THDC975
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Container Handlers (Loaded/Empty)
  • Dimensions
    • Overall Width: Approximately 13 feet
    • Overall Length (less forks): Approximately 30 feet
    • Overall Height: Varies based on configuration
    • Turning Radius: Approximately 25 feet
  • Performance
    • Load Capacity: 97,000 lb
    • Travel Speed (Unloaded): Up to 20 mph
    • Lifting Speed (Loaded): Approximately 50 feet/min
  • Engine
    • Type: Diesel
    • Horsepower: Approximately 365 HP
    • Displacement: Varies
  • Transmission
    • Type: Power Shift
    • Speeds: 3 forward / 3 reverse
  • Tires
    • Type: Pneumatic
    • Front Tire Size: Varies
    • Rear Tire Size: Varies
  • Hydraulic System
    • System Pressure: Approximately 4,500 psi
    • Hydraulic Tank Capacity: Around 70 gallons
  • Fuel System
    • Fuel Tank Capacity: Approximately 180 gallons
  • Brakes
    • Service Brake: Wet Disc
    • Parking Brake: Spring Applied, Hydraulically Released
  • Cab
    • Operator Environment: Ergonomically designed with adjustable seat
    • Controls: Joystick and pedal controls
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following