A pneumatic forklift is a type of lift truck designed to handle heavy loads and operate on rough or uneven outdoor surfaces. It is equipped with large, air-filled pneumatic tires that provide better traction and cushioning compared to solid rubber tires, making it ideal for navigating gravel, dirt, and other challenging terrains. Typically powered by internal combustion engines, pneumatic forklifts are commonly used in settings such as construction sites, lumber yards, and outdoor warehouses where durability and stability are essential. These forklifts are capable of lifting and transporting heavy materials, contributing to efficient and effective material handling operations in rugged environments.
Overall Length (without forks): Approximately 8.5 feet
Overall Width: Approximately 4.1 feet
Overall Height (to top of overhead guard): Approximately 7 feet
Turning Radius: Approximately 8.2 feet
Engine
Engine Manufacturer: Mitsubishi
Engine Model: Included with FG30N
Fuel Type: Gasoline or LPG
Power Output: Variable, typically around 60 HP
Capacity
Load Capacity: 6,000 lbs
Load Center: 24 inches
Performance
Travel Speed (loaded): Approximately 11 mph
Lifting Speed (loaded): Approximately 110 feet per minute
Tires
Tire Type: Pneumatic or Solid (varies by configuration)
Front Tires: 28 inches (diameter)
Rear Tires: 18 inches (diameter)
Brakes
Service Brake: Hydraulic
Parking Brake: Mechanical
Hydraulics
Hydraulic System Pressure: Approximately 2,850 psi
MONTHLY RENTAL
$1,700 USD
WEEKLY RENTAL
$675 USD
DAILY RENTAL
$275 USD
Reserve Rental
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
United Lift LLC Arcangelo Capozzolo: 716-281-1351 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
United Lift LLC Arcangelo Capozzolo: 716-281-1351 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Height to Top of Overhead Guard: Approximately 87 inches
Wheelbase: Approximately 70 inches
Ground Clearance: Approximately 4.5 inches
Performance
Load Capacity: 5,000 lbs
Engine Power: 50 HP (approximately)
Travel Speed (laden/unladen): 11 mph / 12 mph
Lifting Speed (laden/unladen): Around 95 feet per minute / 100 feet per minute
Powertrain
Engine Type: Internal Combustion Engine
Fuel Type: Diesel
Transmission: Powershift 1-speed
Tires
Tire Type: Pneumatic
Front Tires Size: 7.00x12
Rear Tires Size: 6.00x9
Capacities
Fuel Tank Capacity: 13 gallons
Hydraulic System Tank Capacity: 10 gallons
Brakes
Service Brake: Hydraulic
Parking Brake: Mechanical Lever
Forks
Fork Type: Standard
Fork Length: Varies
United Lift LLC Arcangelo Capozzolo: 716-281-1351 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height (Overhead Guard): Approximately 84 inches
Wheelbase: Approximately 71 inches
Fork Length: Varies
Performance
Load Capacity: Approximately 5,000 lbs
Travel Speed: Approximately 11 mph (unloaded)
Turning Radius: Approximately 98 inches
Powertrain
Engine: LP Gas powered
Transmission: Automatic
Tires
Type: Pneumatic
Configuration: 4 Wheel
Operator Environment
Seating: Sit Down
Cabin: Open with Overhead Guard
United Lift LLC Arcangelo Capozzolo: 716-281-1351 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 9 feet (excluding forks)
Overall Width: Approximately 3.8 feet
Overall Height (with cabin): Approximately 7 feet
Weight
Operating Weight: Approximately 8,150 lbs
Forks
Fork Length: Varies
Drive & Brakes
Drive: 2-wheel drive (front)
Brakes: Hydraulic
Wheels
Tire Type: Pneumatic
Front Tires: 7.00-12
Rear Tires: 6.00-9
Unzicker Equipment Chad Unzicker: 309-777-1002 1000 East Queenwood Morton, IL 61550
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
PennellForklift.com Sales Dept.: Email us 201 Rusche St Creve Coeur, IL 61610
No Tax added!
NOTE: Important When Ordering, Please Mention Proposal Number. Deviations From Proposed Specifications May Effect Price and Delivery. Prices are Firm For Thirty Days From Date of Proposal. Subject To Credit Approval. Terms: Net Cash 10 Days. Prices Are Exclusive of State and/or Local Taxes Unless Otherwise Noted.
We Propose the Following Machine and Specifications to Meet Your Material Handling Requirments. Some Options Requested May Have Been Proposed Seperately to Illistrate That Item's Cost. Also, Other Options Not Requested are Included For Your Consideration.
PennellForklift.com Sales Dept.: Email us 201 Rusche St Creve Coeur, IL 61610
No Tax added!
NOTE: Important When Ordering, Please Mention Proposal Number. Deviations From Proposed Specifications May Effect Price and Delivery. Prices are Firm For Thirty Days From Date of Proposal. Subject To Credit Approval. Terms: Net Cash 10 Days. Prices Are Exclusive of State and/or Local Taxes Unless Otherwise Noted.
We Propose the Following Machine and Specifications to Meet Your Material Handling Requirments. Some Options Requested May Have Been Proposed Seperately to Illistrate That Item's Cost. Also, Other Options Not Requested are Included For Your Consideration.