The Taylor XH-180 is known for its design as a small, experimental helicopter. It features coaxial rotors, which eliminate the need for a tail rotor and provide better stability and control. Additionally, the XH-180 was developed in the early 1960s, reflecting a period of innovative exploration in rotorcraft design.
National Lift Equipment Sales: (215) 544-2708 300 Pond St. Bristol, PA 19007
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
New 2024 Taylor XC-180SL cushion high capacity forklit
General Specifications
Model Number: XC-180SL
Manufacturer: Taylor
Type: Forklift
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type: LP Gas
Dimensions
Overall Length: Approx. 12 feet
Overall Width: Approx. 4 feet
Overall Height: Approx. 7 feet
Wheelbase: Approx. 7 feet
Ground Clearance: Approx. 3-4 inches
Performance
Load Capacity: Up to 18,000 lbs
Travel Speed: Varies (generally up to 12 mph)
Engine Power: Approx. 95 HP
Gradeability: Up to 20%
Tires
Type: Cushion
Front Tire Size: Approximately 22x9x16 inches
Rear Tire Size: Approximately 18x7x12 inches
Hydraulic System
Pump Capacity: Approx. 20 gallons per minute
Hydraulic Pressure: Approx. 3,000 psi
Operator Features
Seating Capacity: 1 (Sit Down)
Steering: Power Steering
Controls: Ergonomic Control Levers
Cabin: Open or Optional Enclosed Cab
Forks
Fork Length: Varies
Fork Width: Approx. 6 inches
Fork Thickness: Approx. 2 inches
Welch Utah Keith Fine: 720-574-2538 2181 3200 W west valley city Salt Lake City, UT 84119
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type: LP Gas
Dimensions
Overall Length: Approximately 160 inches (varies based on fork configuration)
Overall Width: Approximately 60 inches
Overall Height (Cab): Approximately 100 inches
Wheelbase: Approximately 90 inches
Weights
Total Weight: Approximately 20,000 lbs
Weight Distribution: Approximately 55% on front axle, 45% on rear axle
Performance
Load Capacity: 30,000 lbs
Maximum Travel Speed: 15 mph
Turning Radius: Approximately 90 inches
Engine
Engine Type: LP Gas Engine
Horsepower: Approximately 100 HP
Cooling System: Liquid-cooled
Tires
Tire Type: Cushion
Tire Size: Front and Rear - 21 x 7 x 16 inches
Brakes
Type: Hydraulic
Service Brake: Wet Disc
Parking Brake: Manual
Hydraulic System
Hydraulic Pump: Gear-type
Hydraulic Tank Capacity: 20 gallons
Operator Compartment
Seat: Adjustable with safety belt
Steering: Hydraulic power steering
Controls: Fingertip control levers
MONTHLY RENTAL
$8,700 USD
WEEKLY RENTAL
$2,900 USD
DAILY RENTAL
$975 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Guardian Fleet Solutions Cameron Carter : 502-273-0323 3306 Gilmore Industrial Blvd Louisville, KY 40213
Overall Length (without forks): Approximately 218 inches
Turning Radius: Approximately 162 inches
Performance:
Load Capacity: Approximately 40,000 lbs
Travel Speed (loaded): Approximately 17 mph
Lifting Speed (loaded): Approximately 60 fpm (feet per minute)
Tires:
Type: Pneumatic
Front Tire Size: 12.00 x 24
Rear Tire Size: 12.00 x 20
Fork Specifications:
Length: Varies
Width: Approximately 10 inches
Thickness: Approximately 3 inches
Operator Compartment:
Seat: Adjustable with suspension
Controls: Ergonomic, multi-functional joystick
Visibility: Enhanced operator visibility design
Safety Features:
LED Work Lights
Automatic Fork Leveling
Reversing Camera
Anti-slip Step Plates
Additional Features:
Weather Resistant Cab
Hydraulic Control System
Digital Load Indicator
Hamre Equipment Co. Inc. Lee Hamre: 530-918-4445 3930 Esplanade Chico, CA 95973
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close