Overview
Spec Sheet
Shipping/Freight
Equipment Description
Excellent running THD300M, serviced and ready to go to work, new paint and decals,Cummins diesel7490 hours cab, 15’ mast with side shifter and fork positioned; 84” forks can get 96” if needed Call Arthur Peagler 912-398-6956 for more info and to set up inspection
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: THD 300 M
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: 217 inches
    • Overall Width: 100 inches
    • Overall Height: 157 inches
    • Wheelbase: 120 inches
    • Ground Clearance: 13 inches
    • Fork Length: Varies
  • Performance
    • Load Capacity: 66,000 lbs
    • Tilt Angle: 10° forward / 5° backward
    • Travel Speed: 20 mph
    • Gradeability: 25%
  • Engine
    • Engine Model: Perkins 2806
    • Power Output: 300 HP
    • Rated RPM: 2200 RPM
    • Torque: 1,100 lb-ft
    • Cylinder Count: 6
    • Fuel Capacity: 150 gallons
  • Chassis and Tires
    • Tire Type: Pneumatic
    • Tire Size (Front): 16.00 R25
    • Tire Size (Rear): 14.00 R24
    • Steering: Power Steering
    • Brakes: Wet Disc Brakes
  • Hydraulics
    • Hydraulic System Pressure: 3,500 psi
    • Hydraulic Tank Capacity: 90 gallons
  • Operator Features
    • Cab Type: Enclosed with AC
    • Seating: Adjustable suspension seat
    • Controls: Ergonomic levers and pedals
    • Display: Multi-function digital display
  • Weight
    • Operating Weight: 94,000 lbs

2000 Taylor THD 300 M

pneumatic tire 4 wheel sit down diesel

$84,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Arthur Peagler
Phone:
Website:

ADDRESS
AHP Enterprises
2595 W. Bay St
SavannahGeorgia 31408
ATTRIBUTES
YEAR:
2000
Manufacturer:
MODEL #:
CAPACITY:
30000
FUEL:
MAST TYPE:
MAST HEIGHT:
15 in
SERIAL #:
28532
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
7490
UNIT LOCATION:
Georgia [31408]
DESCRIPTION:
Taylor THD 300M 15’ mast SS FP New paint/ Decals
POST DATE:
12/5/2025
Reviews
Useful
Not

The Taylor THD 300 M forklift has been a solid addition to our warehouse operations. I once operated a different brand and thought it was pretty decent, but the comfort and control of this Taylor really stand out during a long day of moving heavy loads. It handles well on uneven surfaces, which is a game-changer for our outdoor tasks. And, can't forget the diesel engine—it starts up without any fuss, even in cooler weather, which has made early mornings a lot easier. All in all, this unit has proven to be both reliable and efficient, making my job feel a lot less daunting.



Review by Jake Thompson (1/4/2025)

  • General Specifications
    • Model Number: THD 300 M
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: 217 inches
    • Overall Width: 100 inches
    • Overall Height: 157 inches
    • Wheelbase: 120 inches
    • Ground Clearance: 13 inches
    • Fork Length: Varies
  • Performance
    • Load Capacity: 66,000 lbs
    • Tilt Angle: 10° forward / 5° backward
    • Travel Speed: 20 mph
    • Gradeability: 25%
  • Engine
    • Engine Model: Perkins 2806
    • Power Output: 300 HP
    • Rated RPM: 2200 RPM
    • Torque: 1,100 lb-ft
    • Cylinder Count: 6
    • Fuel Capacity: 150 gallons
  • Chassis and Tires
    • Tire Type: Pneumatic
    • Tire Size (Front): 16.00 R25
    • Tire Size (Rear): 14.00 R24
    • Steering: Power Steering
    • Brakes: Wet Disc Brakes
  • Hydraulics
    • Hydraulic System Pressure: 3,500 psi
    • Hydraulic Tank Capacity: 90 gallons
  • Operator Features
    • Cab Type: Enclosed with AC
    • Seating: Adjustable suspension seat
    • Controls: Ergonomic levers and pedals
    • Display: Multi-function digital display
  • Weight
    • Operating Weight: 94,000 lbs
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following