Explore our best priced selection of 1 Big Joe pdcm-20-60 Forklift in stock. These Big Joe pdcm-20-60 Forklift are available for immediate and local delivery.
Overall Length: approximately 72 inches (without forks)
Overall Width: 36 inches
Performance:
Travel Speed: 2.0 – 3.0 mph
Load Center Distance: 24 inches
Power:
Battery Voltage: 24V
Forks:
Fork Length: varies
Additional Features:
Electric Power Steering
Regenerative Braking System
Patterson Lift Trucks Inc Jake Patterson 975 Industrial Parkway West Hayward, CA 94544
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Overall Length: Approximately varies based on configuration
Overall Width: 21 inches
Overall Height: Typically varies
Fork Width: 6.5 inches per fork
Fork Spread (outside): 21 inches
Performance
Travel Speed: Variable, typically up to 3.5 mph
Gradeability: Up to 3% laden; higher unladen
Power and Control
Battery: 24-volt system
Charger Included: Yes, onboard or portable options
Control Type: Handle-based control with fingertip buttons
Additional Features
Braking System: Regenerative braking
Steering: Manual, tiller handle steering
Operator Platform: Not featured (walk-behind model)
Drive Motor: AC drive motor
Operation
Operator Position: Walk-behind
Turning Radius: Typically around 70-80 inches
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Safety Features: Deadman Pedal, Emergency Power Disconnect
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type Used: Electric
Dimensions:
Overall Length: 85 inches (approx.)
Width: 42 inches (approx.)
Overall Height (Cab): 87 inches (approx.)
Wheelbase: 55 inches (approx.)
Weight & Capacity:
Operating Weight: 8,500 lbs (approx.)
Lifting Capacity: 4,000 lbs
Performance:
Travel Speed: 8 mph
Lift Speed: 80 feet per minute (fpm)
Lowering Speed: 90 feet per minute (fpm)
Power System:
Voltage: 48V
Battery Capacity: Varies
Wheels & Tires:
Type: Cushion Tire
Front Tires: 18 x 6 inches
Rear Tires: 14 x 5 inches
Turning & Stability:
Turning Radius: 60 inches (approx.)
Stability System: Integrated Stability System
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type Used: Electric
Dimensions:
Overall Length: 85 inches (approx.)
Width: 42 inches (approx.)
Overall Height (Cab): 87 inches (approx.)
Wheelbase: 55 inches (approx.)
Weight & Capacity:
Operating Weight: 8,500 lbs (approx.)
Lifting Capacity: 4,000 lbs
Performance:
Travel Speed: 8 mph
Lift Speed: 80 feet per minute (fpm)
Lowering Speed: 90 feet per minute (fpm)
Power System:
Voltage: 48V
Battery Capacity: Varies
Wheels & Tires:
Type: Cushion Tire
Front Tires: 18 x 6 inches
Rear Tires: 14 x 5 inches
Turning & Stability:
Turning Radius: 60 inches (approx.)
Stability System: Integrated Stability System
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Power Source:
Electric
Capacity:
Lift Capacity: 4,000 lbs
Dimensions:
Overall Length: 86 inches
Overall Width: 42 inches
Overall Height (top of overhead guard): 84 inches
Wheelbase: 56 inches
Performance:
Travel Speed: 9 mph
Lift Speed: 60 ft/min
Lowering Speed: 80 ft/min
Tires:
Type: Cushion
Front: 18 x 7 inches
Rear: 14 x 4.5 inches
Brakes:
Service Brake: Hydraulic
Parking Brake: Manual
Operator Compartment:
Seat Type: Adjustable with Suspension
Hydraulic System:
Hydraulic Tank Capacity: 12 gallons
Battery:
Voltage: 48V
Typical Capacity: 750 Ah
Forks:
Length: Varies
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Safety Features: Deadman Pedal, Emergency Power Disconnect
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Welch Equipment Company Inc Keith Fine 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Dimensions
Overall Length: Approximately 8.5 feet
Overall Width: Approximately 3.5 feet
Overall Height: Adjusted based on overhead guard
Wheelbase: Approximately 5 to 6 feet
Ground Clearance: Approximately 3 to 4 inches
Weight
Service Weight: Approximately 8,000 to 10,000 lb
Load Capacity: 4,500 lb
Powertrain
Drive Motor: Electric Motor
Battery Voltage: 24V to 48V Options Available
Transmission Type: Electric
Performance
Travel Speed: Approximately 7.5 mph unloaded
Lift Speed: Approximately 59 ft/min unloaded
Turning Radius: Approximately 6.5 to 7.5 feet
Wheels
Tire Type: Cushion
Front Tire Size: Approximately 18 inches
Rear Tire Size: Approximately 14 inches
Forks
Fork Length: Varies
Fork Width: Approximately 4 inches
Fork Thickness: Approximately 1.5 inches
Other Features
Brakes: Hydraulic Brakes
Steering: Power Steering
Operator Seat: Adjustable with Suspension
Welch Equipment Company Inc Keith Fine 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Welch Equipment Company Inc Keith Fine 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Welch Equipment Company Inc Keith Fine 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Equipment
Close