New Feature: Eliftruck Price Point Introducing Eliftruck Price Point — the forklift price estimator built for buyers, sellers, and fleet managers. Instantly get accurate, market-based valuations with just a few details.
Don’t overpay or undersell—discover your forklift’s true market value in seconds. Click on the PRICE POINT orange button below to get started.
The Zoomlion FE18 is known for being an electric forklift with advanced features. It offers efficient performance with a compact design, suitable for indoor and outdoor use. The model emphasizes energy efficiency and environmental friendliness, utilizing lithium battery technology for longer run times and shorter charging periods. Additionally, it provides enhanced maneuverability and ease of operation, making it ideal for various material handling tasks.
42" FORKS - SOLID PNEUMATIC TIRES - CHARGER INCLUDED
Manufacturer: Zoomlion
Model Number: FE18
Type: Forklift
Subtype: Electric 3 Wheel Sit Down
Fuel Type: Electric
Performance:
Load Capacity: 3,968 lbs
Drive Motor Power: 6.7 HP
Lift Motor Power: 9.4 HP
Travel Speed: 8 mph (unloaded)
Turning Radius: 59 inches
Dimensions:
Overall Length: 78 inches
Overall Width: 43 inches
Overall Height (Cab): 83 inches
Wheelbase: 47 inches
Ground Clearance: 4 inches
Weight:
Service Weight: 7,717 lbs
Battery:
Battery Voltage: 48V
Battery Capacity: 500 Ah
Tires:
Tire Type: Pneumatic
Front Tires: 18 x 7 inches
Rear Tires: 6.5 x 10 inches
ForkliftTrader Sales: 262-333-0279 1610 Pearl St Waukesha, WI 53186
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Listings above this line match your search request, listings below may not match but are similar and may be used as an alternative.
2005 Hyster S50FT
Western Material Handling
1
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
FINANCE
STK#:
D21702d
MAKE:
Hyster
MODEL:
S50FT
MAST TYPE:
Three Stage
MAST - RAISED:
189 in
FUEL:
LP Gas
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
$17,995 USD
D21702d NICE 2005 HYSTER S50FT 5K CUSH 3STG SS LP
General Information
Model Number: S50FT
Manufacturer: Hyster
Type: Forklift
Dimensions
Overall Width: 42 inches
Overall Length to Forkface: Varies depending on configuration
Height (Overhead Guard): Approximately 86 inches
Wheelbase: 60 inches
Powertrain
Engine Type: Internal Combustion
Fuel Type: LPG (Liquid Propane Gas)
Transmission Type: Powershift
Cylinders: 4
Capacity
Load Capacity: 5,000 lbs
Load Center: 24 inches
Tire Information
Tire Type: Pneumatic
Front Tires: 7.00-12
Rear Tires: 6.00-9
Performance
Travel Speed (Loaded): 11 mph
Lifting Speed (Loaded): 120 feet/min
Lowering Speed (Loaded): 100 feet/min
Steering
Steering Type: Hydrostatic Power Steering
Steering Angle: 90 degrees in both directions
Brake System
Service Brake: Hydraulic
Parking Brake: Mechanical Hand Lever
Western Material Handling Dennis Firkins: 303-625-6477 1113 N. College Ave Ft Collins, CO 80524
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Johns Lift Repair and Service Inc. Sako Krikorian : 323 721 1477 546 S Greenwood Ave Montebello, CA 90640
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
D21713d AMAZING 2014 HYSTER S50CT 5K CUSH 3STG SS LP
General Information
Model Number: S50CT
Manufacturer: Hyster
Type: Forklift
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Dimensions
Overall Length: Approx. 95 inches (varies with fork length)
Overall Width: Approx. 42 inches
Height to Top of Overhead Guard: Approx. 83 inches
Wheelbase: Approx. 56 inches
Ground Clearance: Approx. 3.5 inches
Performance
Load Capacity: 5,000 lbs
Travel Speed: Up to 10 mph unloaded
Lifting Speed: Varies with load
Lowering Speed: Varies with load
Engine
Engine Manufacturer: Typically GM
Engine Model: 2.4L Inline 4-cylinder
Fuel Type: LPG (Liquid Petroleum Gas)
Wheels
Tire Type: Cushion
Number of Wheels: 4
Braking System
Service Brake: Hydraulic
Parking Brake: Mechanical
Hydraulic System
Hydraulic Controls: Lever or joystick
Operator Area
Seat: Adjustable with seatbelt
Steering: Power steering
Instrument Display: Multifunctional display with indicators
Western Material Handling Dennis Firkins: 303-625-6477 1113 N. College Ave Ft Collins, CO 80524
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
ATP Equipment Exchange Inc. Anthony Plazibat: 815-940-4199 303 Mound Rd Bldg 1 Complex 2 Rockdale, IL 60436
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Travel speed: Forward: Up to 3.7 mph (unloaded), Reverse: Up to 3.1 mph (unloaded)
Gradeability: 4% (loaded), 10% (unloaded)
Dimensions
Overall length: Varies
Overall width: 28 inches
Wheelbase: 52.9 inches
Fork Details
Fork width: 27 inches
Fork length: Varies
Wheels
Drive tire size: 10 x 5 inches
Load wheel size: 2.875 x 3.875 inches
Tire type: Polyurethane
Chassis
Steel construction
Rust-resistant coating
Operator Features
Ergonomic handle design
Intuitive controls
Cushioned platform
Safety Features
Emergency reverse switch
Horn
Anti-roll back feature on gradients
Additional Features
Low maintenance components
Battery discharge indicator
Welch Equipment Company Inc Keith Fine: 719-625-2311 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Travel Speed (without load): Approximately 12.5 mph
Gradeability: Approximately 20% (loaded)
Dimensions
Overall Length (without fork): Approximately 8.3 feet
Overall Width: Approximately 4.4 feet
Overall Height (cabin): Approximately 7.3 feet
Fork Length: Varies
Wheelbase: Approximately 5.6 feet
Weight
Total Weight: Approximately 9,260 lbs
Additional Features
Hydraulic System Pressure: Approximately 2,650 psi
Braking System: Hydraulic
Steering System: Hydraulic Power Steering
ForkliftTrader Sales: 262-333-0279 1610 Pearl St Waukesha, WI 53186
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type: Diesel
General Specifications
Operator Position: Sit Down
Number of Wheels: 4
Tire Type: Cushion
Dimensions
Overall Length: 150 inches
Overall Width: 60 inches
Height to Top of Overhead Guard: 90 inches
Turning Radius: 120 inches
Wheelbase: 85 inches
Capacity
Rated Load Capacity: 30,000 lbs
Load Center: 24 inches
Performance
Travel Speed: 15 mph
Lift Speed (Loaded): 90 feet per minute
Lowering Speed (Loaded): 100 feet per minute
Engine Specifications
Engine Type: Diesel
Engine Power: 120 HP
Displacement: 6 liters
Transmission
Type: Powershift
Number of Speeds: 3 Forward / 3 Reverse
Brake System
Service Brake: Wet Disc
Parking Brake: Spring Applied Hydraulic Release
Hydraulic System
Pump Type: Gear
Operating Pressure: 3000 psi
Fork Specifications
Fork Length: Varies
Fork Width: 8 inches
Fork Thickness: 3 inches
Wholesale Lift Trucks Sales: 519 461 9900 21767 Nissouri Rd Unit B Thorndale, ON N0M 2P0
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
United Lift LLC Arcangelo Capozzolo: 716-281-1351 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
ForkliftTrader Sales: 262-333-0279 1610 Pearl St Waukesha, WI 53186
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Hydraulic Control: Fingertip hydraulic control levers
Hydraulic Pump Flow: Approximately 17.7 gallons per minute
Transmission
Transmission Type: Powershift
Number of Speeds: Multiple forward and reverse speeds
Trivium Equipment Richard Wroble: 480-525-5278 2451 W Peterson Dr. Apache Junction, AZ 85120
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Hupp Toyota Lift Jay Miller: 319.550.8846 275 33rd Av SW Cedar Rapids, IA 52404
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
FULL RECONDITIONED, LOW HOURS, NEW PAINT, NEW TIRES
General Information
Manufacturer: Toyota
Model Number: 7FGCU35
Type: Forklift
Dimensions
Overall Length: 104 inches
Overall Width: 48 inches
Overall Height to Top Overhead Guard: 86 inches
Wheelbase: 70 inches
Engine
Engine Type: 4-Cylinder Internal Combustion
Fuel Type: LPG (Liquid Petroleum Gas)
Performance
Load Capacity: 7,000 lbs
Speed: 13.6 mph (Unladen)
Turning Radius: 90 inches
Chassis
Tire Type: Cushion
Front Tire Size: 21 inches
Rear Tire Size: 16 inches
Hydraulics
Pressure: 2,835 psi
Hydraulic Flow Rate: 17 gallons per minute
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
FULL RECONDITIONED WITH USED BATTERY AND CHARGER INCLUDED
Model Number: 7FBEU15
Manufacturer: Toyota
Type: Forklift
General Specifications
Load Capacity: 3,000 lbs
Power Type: Electric
Operator Position: Seated
Tire Type: Cushion
Battery Voltage: 36V or 48V
Dimensions
Overall Length: Approximately 88 inches (varies with fork length)
Overall Width: 39.4 inches
Overall Height (with overhead guard): 78.7 inches
Wheelbase: 55.1 inches
Ground Clearance: 3.5 inches
Performance
Travel Speed (loaded/unloaded): 9.3 mph / 9.3 mph
Lift Speed (loaded/unloaded): 80 feet per minute / 110 feet per minute
Gradeability (loaded/unloaded): 20% / 25%
Turning Radius: 70.1 inches
Weight
Service Weight: Approximately 6,818 lbs
Brakes
Service Brake: Hydraulic
Parking Brake: Mechanical Lever
Attachments
Fork Length: Varies
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
**Model Summary**
- Model Number: S180XL-2
- Manufacturer: Hyster
- Type: Forklift
- Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
- Fuel Type: LP Gas
**Dimensions**
- Overall Length: Approx. 153 inches
- Overall Width: Approx. 56.5 inches
- Overall Height (to top of overhead guard): Approx. 88 inches
- Wheelbase: Approx. 90 inches
**Powertrain**
- Engine Type: Internal Combustion
- Fuel Type: LP Gas
- Transmission: Powershift
**Weight**
- Operating Weight: Approximately 23,000 lbs
**Capacity**
- Load Capacity: 18,000 lbs
**Performance**
- Travel Speed: Approx. 12 mph
- Load Center: 24 inches
**Tires**
- Tire Type: Cushion
- Number of Wheels: 4
**Operator Environment**
- Seat: Ergonomic adjustable seat
- Controls: Hydraulic levers or joystick options
- Safety Features: Standard safety features including seat belt and overhead guard
**Additional Features**
- Steering: Power steering
- Brakes: Hydraulic brakes
- Hydraulic System: Load-sensing hydraulic system
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Lee Cassam & Associates Lee Cassam: 817 838 5438 2108 Delante St Haltom City, TX 76117
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height (to top of overhead guard): Approx. 85 inches
Wheelbase: Approx. 70.8 inches
Fork Length: Varies
Weights
Service Weight: Approx. 8,400 lbs
Performance
Load Capacity: 6,000 lbs
Travel Speed Loaded: Approx. 11.2 mph
Travel Speed Unloaded: Approx. 11.8 mph
Turning Radius: Approx. 94.5 inches
Powertrain
Engine Type: Internal Combustion
Engine Model: Typically a 4-cylinder engine for this class
Power Output: Approx. 60 hp
Transmission Type: Automatic
Drive: 2WD (rear)
Chassis
Tire Type: Pneumatic
Tire Configuration: 4 Wheel
Hydraulics
Hydraulic System Type: Open Center
Steering Type: Hydraulic Power Steering
Operator Station
Seat Type: Adjustable
Instrumentation: Standard with Gauge Suite
ForkliftTrader Sales: 262-333-0279 1610 Pearl St Waukesha, WI 53186
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Engine Power: Typically around 50 HP (check specific model year)
Dimensions:
Overall Length: Approximately 100 inches (excluding forks)
Overall Width: About 43 inches
Overall Height: Around 85 inches (overhead guard)
Wheelbase: Approximately 60 inches
Capacity:
Load Capacity: 5,000 lbs
Fuel Tank Capacity: Varies, typically around 33 lbs LP cylinder
Performance:
Travel Speed: Approximately 11 mph (loaded/unloaded varies)
Turning Radius: Roughly 90 inches
Tires:
Type: Pneumatic
Front Tire Size: 7.00-12
Rear Tire Size: 6.00-9
Forks:
Fork Length: Varies
ForkliftTrader Sales: 262-333-0279 1610 Pearl St Waukesha, WI 53186
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height (to top of overhead guard): Approx. 85 inches
Wheelbase: Approx. 70.8 inches
Fork Length: Varies
Weights
Service Weight: Approx. 8,400 lbs
Performance
Load Capacity: 6,000 lbs
Travel Speed Loaded: Approx. 11.2 mph
Travel Speed Unloaded: Approx. 11.8 mph
Turning Radius: Approx. 94.5 inches
Powertrain
Engine Type: Internal Combustion
Engine Model: Typically a 4-cylinder engine for this class
Power Output: Approx. 60 hp
Transmission Type: Automatic
Drive: 2WD (rear)
Chassis
Tire Type: Pneumatic
Tire Configuration: 4 Wheel
Hydraulics
Hydraulic System Type: Open Center
Steering Type: Hydraulic Power Steering
Operator Station
Seat Type: Adjustable
Instrumentation: Standard with Gauge Suite
ForkliftTrader Sales: 262-333-0279 1610 Pearl St Waukesha, WI 53186
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close