Overview
Spec Sheet
Shipping/Freight
Spec Sheet
  • General Specifications
    • Model Number: FGC25N
    • Manufacturer: Mitsubishi
    • Power Type: Propane (LPG)
    • Operator Type: Sit-down Rider
    • Truck Type: Counterbalanced
  • Dimensions
    • Overall Length: Approximately 97.4 inches (varies based on fork length)
    • Overall Width: 41.3 inches
    • Height to Top of Overhead Guard: 84.1 inches
    • Minimum Outside Turning Radius: 89.4 inches
    • Wheelbase: 55.1 inches
    • Ground Clearance: 4.3 inches under mast, 6.5 inches centered
  • Performance
    • Load Capacity: 5,000 lbs
    • Drive Speed: 11.2 mph (unloaded), 11.4 mph (loaded)
    • Lifting Speed: 118 feet per minute (unloaded), 108 feet per minute (loaded)
  • Engine
    • Engine Model: Mitsubishi 4G63
    • Engine Type: 4-Cylinder, Liquid-Cooled, Gasoline
    • Displacement: 122 cubic inches
    • Rated Power: 59.8 HP at 2,700 RPM
    • Fuel Tank Capacity: 33.8 lbs
  • Tire Information
    • Front Tires: 7.00-12-12PR
    • Rear Tires: 6.00-9-10PR
    • Tire Type: Pneumatic
  • Other Features
    • Hydraulic System: Load Sensing
    • Transmission: Power Shift
    • Brakes: Hydraulic
    • Steering: Hydrostatic
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

2018 Mitsubishi FGC25N

cushion tire 4 wheel sit down (indoor warehouse) lp gas

$8,500 USD
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Mike
Phone:

ADDRESS
Sun Equipment Inc
3517 Cantwell Blvd
Ft Wayne Indiana 46819
ATTRIBUTES
STOCK #:
29114
YEAR:
2018
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
83 / 188 in
SERIAL #:
AF82F44722
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
6716
UNIT LOCATION:
Georgia [46819]
DESCRIPTION:
Two Units Available, Retail Ready. Side Shift
POST DATE:
2/26/2026
Reviews
Useful
Not

The Mitsubishi FGC25N has really impressed me with its performance and reliability. A couple of months ago, while working at my friend's warehouse, I got to see it in action during a busy shipment day. It handled heavy loads like a champ, and I noticed how smooth and quiet it ran compared to some of the other models we had around. After spending so much time struggling with clunky machinery in the past, this was a breath of fresh air. It’s nice to know there’s an option out there that can really keep up with the demands of daily tasks, especially when deadlines are tight. Overall, it's a solid choice if you're looking for something that won’t let you down.

Review by James Thompson

  • General Specifications
    • Model Number: FGC25N
    • Manufacturer: Mitsubishi
    • Power Type: Propane (LPG)
    • Operator Type: Sit-down Rider
    • Truck Type: Counterbalanced
  • Dimensions
    • Overall Length: Approximately 97.4 inches (varies based on fork length)
    • Overall Width: 41.3 inches
    • Height to Top of Overhead Guard: 84.1 inches
    • Minimum Outside Turning Radius: 89.4 inches
    • Wheelbase: 55.1 inches
    • Ground Clearance: 4.3 inches under mast, 6.5 inches centered
  • Performance
    • Load Capacity: 5,000 lbs
    • Drive Speed: 11.2 mph (unloaded), 11.4 mph (loaded)
    • Lifting Speed: 118 feet per minute (unloaded), 108 feet per minute (loaded)
  • Engine
    • Engine Model: Mitsubishi 4G63
    • Engine Type: 4-Cylinder, Liquid-Cooled, Gasoline
    • Displacement: 122 cubic inches
    • Rated Power: 59.8 HP at 2,700 RPM
    • Fuel Tank Capacity: 33.8 lbs
  • Tire Information
    • Front Tires: 7.00-12-12PR
    • Rear Tires: 6.00-9-10PR
    • Tire Type: Pneumatic
  • Other Features
    • Hydraulic System: Load Sensing
    • Transmission: Power Shift
    • Brakes: Hydraulic
    • Steering: Hydrostatic
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following