The Taylor T-300S is known for its high-performance capabilities and innovative design. It features advanced aerodynamics, a lightweight composite structure, and cutting-edge technology in its systems, providing enhanced efficiency and maneuverability. Additionally, it is recognized for its reliability and user-friendly interface, making it popular in its category.
Overall Length: Approximately 270 inches (varies by fork length)
Overall Width: Approximately 120 inches
Overall Height (to top of overhead guard): Approximately 144 inches
Wheelbase: Approximately 144 inches
Weight: Approximately 60,000 lbs
Performance
Rated Capacity: Approximately 45,000 lbs
Travel Speed (loaded): Approximately 15 mph
Travel Speed (unloaded): Approximately 18 mph
Lifting Speed (loaded): Approximately 60 feet/minute
Lowering Speed (loaded): Approximately 70 feet/minute
Engine
Type: Diesel Engine
Displacement: Approximately 860 cubic inches
Horsepower: Approximately 250 HP
Torque: Approximately 900 lb-ft
Chassis
Steering: Hydraulic power steering
Brakes: Wet disc brakes
Tires: Pneumatic, Front and Rear
Hydraulics
Hydraulic System Pressure: Approximately 3,500 psi
United Lift LLC Arcangelo Capozzolo: 716-281-1351 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type: Diesel
General Specifications
Operator Position: Sit Down
Number of Wheels: 4
Tire Type: Cushion
Dimensions
Overall Length: 150 inches
Overall Width: 60 inches
Height to Top of Overhead Guard: 90 inches
Turning Radius: 120 inches
Wheelbase: 85 inches
Capacity
Rated Load Capacity: 30,000 lbs
Load Center: 24 inches
Performance
Travel Speed: 15 mph
Lift Speed (Loaded): 90 feet per minute
Lowering Speed (Loaded): 100 feet per minute
Engine Specifications
Engine Type: Diesel
Engine Power: 120 HP
Displacement: 6 liters
Transmission
Type: Powershift
Number of Speeds: 3 Forward / 3 Reverse
Brake System
Service Brake: Wet Disc
Parking Brake: Spring Applied Hydraulic Release
Hydraulic System
Pump Type: Gear
Operating Pressure: 3000 psi
Fork Specifications
Fork Length: Varies
Fork Width: 8 inches
Fork Thickness: 3 inches
Wholesale Lift Trucks Sales: 519 461 9900 21767 Nissouri Rd Unit B Thorndale, ON N0M 2P0
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Carolina-Georgia Services Company Larry Jenkins: 404-531-7680 4201 Elizabeth St NE Covington, GA 30014-2850
Hydraulic Pump Capacity: Approximately 100 gallons per minute
Working Pressure: Approximately 4,000 psi
Cab
Operator's Cab: Ergonomic with climate control
Visibility: 360-degree visibility with wide windows
Noise Level: Noise-insulated design for reduced operator fatigue
Carolina-Georgia Services Company Larry Jenkins: 404-531-7680 4201 Elizabeth St NE Covington, GA 30014-2850
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
North Texas Equipment Services LLC. Gerald Dyson: 972-435-7517 409 Woodhollow Dr Wylie, TX 75098
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
3 HIGH CONTAINER NEW PAINT 4 NEW FRONT TIRES 7200 HRS.ORG.
General Specifications
Model Number: TYC920L
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Dimensions
Overall Length: Approximately 200 inches (varies with fork length)
Overall Width: Approximately 102 inches
Overall Height: Approximately 130 inches
Wheelbase: Approximately 125 inches
Ground Clearance: Approximately 12 inches
Weights
Operating Weight: Approximately 56,000 lbs
Engine
Engine Type: Diesel
Horsepower: Approximately 250 HP
Cylinder Count: 6
Performance
Load Capacity: Approximately 20,000 lbs
Travel Speed Loaded: Approximately 20 mph
Lift Speed Loaded: Approximately 75 feet/minute
Drawbar Pull: Approximately 30,000 lbs
Chassis
Tire Type: Pneumatic
Tire Size Front: Approximately 12.00 x 20
Tire Size Rear: Approximately 12.00 x 20
Options
Cab Options: Open or Enclosed
Attachments: Varies by Application
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close