The Raymond 840-FRE60L is known for being a counterbalanced, four-directional reach truck. It's designed to handle long loads efficiently and enhance space utilization in warehouse environments. The truck's directional capabilities allow it to operate in aisles narrower than those needed by traditional reach trucks, increasing storage density. Additionally, it offers advanced control systems and ergonomic features that improve operator comfort and productivity.
Travel Speed: Up to 3.4 mph loaded / 3.6 mph unloaded
Dimensions:
Height: Approximately 56 inches
Width: Approximately 32 inches
Welch Equipment Company Inc Keith Fine 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Travel Speed: Up to 3.4 mph loaded / 3.6 mph unloaded
Dimensions:
Height: Approximately 56 inches
Width: Approximately 32 inches
Welch Equipment Company Inc Keith Fine 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Travel Speed: Up to 3.4 mph loaded / 3.6 mph unloaded
Dimensions:
Height: Approximately 56 inches
Width: Approximately 32 inches
Welch Equipment Company Inc Keith Fine 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Travel Speed: Up to 3.4 mph loaded / 3.6 mph unloaded
Dimensions:
Height: Approximately 56 inches
Width: Approximately 32 inches
Welch Denver Jack Thompson 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Travel Speed: Up to 3.4 mph loaded / 3.6 mph unloaded
Dimensions:
Height: Approximately 56 inches
Width: Approximately 32 inches
Welch Denver Jack Thompson 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Overall Length: 70 to 90 inches (varies depending on configuration)
Overall Width: 36 inches
Height to Top of Battery: 59 inches
Wheelbase: 55 inches
Weight: 2,200 lbs
Performance
Load Capacity: 8,000 lbs
Travel Speed (Loaded): 3.5 - 4.1 mph
Travel Speed (Unloaded): 4.5 - 5.3 mph
Gradeability (Loaded): Up to 5%
Gradeability (Unloaded): Up to 10%
Tires & Wheels
Drive Tire Size: 10 x 5 inches
Load Wheel Size: 3 x 3 inches
Tire Type: Polyurethane
Power & Battery
Battery Voltage: 24V
Battery Capacity: 510 Ah
Charger Type: Built-in
Features
AC Drive Motor
Ergonomic Control Handle
Regenerative Braking System
Low Step Height for Operator Comfort
Adjustable Fork Options
Welch Equipment Company Inc Keith Fine 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Overall Length: 70 to 90 inches (varies depending on configuration)
Overall Width: 36 inches
Height to Top of Battery: 59 inches
Wheelbase: 55 inches
Weight: 2,200 lbs
Performance
Load Capacity: 8,000 lbs
Travel Speed (Loaded): 3.5 - 4.1 mph
Travel Speed (Unloaded): 4.5 - 5.3 mph
Gradeability (Loaded): Up to 5%
Gradeability (Unloaded): Up to 10%
Tires & Wheels
Drive Tire Size: 10 x 5 inches
Load Wheel Size: 3 x 3 inches
Tire Type: Polyurethane
Power & Battery
Battery Voltage: 24V
Battery Capacity: 510 Ah
Charger Type: Built-in
Features
AC Drive Motor
Ergonomic Control Handle
Regenerative Braking System
Low Step Height for Operator Comfort
Adjustable Fork Options
Welch Denver Jack Thompson 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Welch Equipment Company Inc Keith Fine 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Equipment
Close