Master Craft Pneumatic Tire 4 Wheel Sit Down Forklift For Sale
Master Craft Pneumatic Tire 4 Wheel Sit Down equipment is recognized for several notable features that set it apart from its competitors. It is known for its durability and robust engineering, designed to perform well in demanding industrial environments. This equipment typically offers superior stability and maneuverability, which enhances safety and efficiency in operations. Additionally, it often incorporates advanced ergonomics to improve operator comfort and reduce fatigue during long shifts. The brand is also praised for its reliable after-sales service and maintenance support, ensuring that the equipment remains in optimal condition throughout its lifecycle.
Drive Speed (laden/unladen): Approximately 11 mph / 12 mph
Lift Speed (laden/unladen): Approximately 100 ft/min / 110 ft/min
Dimensions
Overall Length with Forks: Varies
Width: 55 inches
Height (cab): 8 feet
Wheelbase: 6 feet
Ground Clearance: 7 inches
Weight
Operating Weight: 17,000 lbs
Engine
Engine Type: Diesel Engine
Engine Power: 100 HP
Displacement: 276 cubic inches
Tires
Tire Size (front): 8.25 x 15
Tire Size (rear): 8.25 x 15
Braking System
Service Brakes: Hydraulic
Parking Brake: Mechanical
Hydraulic System
Hydraulic Pressure: 3,200 psi
Comfort and Ergonomics
Adjustable Seat: Yes
Power Steering: Yes
Cabin Features: Optional Air Conditioning
Equip Seller Ed Joyce 10 Industrial Hwy Lester, PA 19029
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Max Travel Speed (unloaded): Approximately 12.5 mph
Performance
Rated Load Capacity: Approximately 11,000 lbs
Load Center: About 24 inches
Turning Radius: Approximately 108 inches
Wheels and Tires
Type: Pneumatic
Number of Tires: 4
Front Tire Size: Approximately 8.25-15
Rear Tire Size: Approximately 8.25-15
Hydraulics
Hydraulic System Pressure: Approximately 2,987 psi
Operator's Compartment
Seat: Adjustable with Suspension
Steering: Fully Hydrostatic Power Steering
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
TB Forklifts Antonio Borboa 5410 Mary Francis Dr Houston, TX 77039
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height (to top of overhead guard): 82.7 inches
Wheelbase: 55.1 inches
Ground Clearance (at lowest point): 4.3 inches
Performance
Load Capacity: 3,500 lbs
Load Center: 24 inches
Travel Speed (laden): 11.8 mph
Travel Speed (unladen): 12.4 mph
Weight
Service Weight: 6,527 lbs
Engine
Engine Model: K21
Power Output: 45.3 HP
Fuel Type: LP Gas
Wheels and Tires
Tire Type: Pneumatic
Front Tire Size: 7.00-12
Rear Tire Size: 6.00-9
Brakes
Service Brake: Hydraulic
Parking Brake: Mechanical Lever
Steering
Steering Type: Hydraulic Power Steering
Turning Radius: 77.0 inches
Hydraulics
Hydraulic Pressure: 2,755 psi
Unzicker Equipment Chad Unzicker 1000 East Queenwood Morton, IL 61550
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height (to top of overhead guard): Approximately 126 inches
Wheelbase: Approximately 128 inches
Ground Clearance: Approximately 10 inches
Weight
Operating Weight: Approximately 48,000 lbs
Capacity
Load Capacity: 36,000 lbs
Engine
Type: Diesel
Displacement: Approximately 546 cubic inches
Power: Approximately 200 HP
Performance
Travel Speed: Approximately 18 mph
Lift Speed: Approximately 100 feet per minute
Gradeability: Approximately 31%
Chassis
Steering Type: Hydrostatic Power Steering
Brake Type: Wet Disc Brakes
Forks
Fork Length: Varies
Fork Width: Approximately 10 inches
Fork Thickness: Approximately 2.5 inches
Tires
Tire Type: Pneumatic
Front Tires: Approximately 12 x 24-18 PR
Rear Tires: Approximately 12 x 24-18 PR
Forklift Exchange, Inc. Mike Flaska 116 W Hubbard St Chicago, IL 60654
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Birnstengel Equipment Mike or James 6100 Olson Memorial Hwy Golden Valley, MN 55422
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Illinois Lift Equipment John Hellyer 640 Industrial Dr Cary, IL 60013
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Miller Equipment Co. Foster Miller 1000 N First St Garland, TX 75040
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Engine Power: Varies by Model; Typically around 100 HP
Displacement: Approximately 3.5 to 4.5 liters
Number of Cylinders: Typically 4 to 6
Performance
Lift Capacity: Varies by Model; Typically 6,000 to 10,000 lbs
Drive Speed: Up to 15 mph
Hydraulic System Pressure: Approximately 3,500 psi
Dimensions
Overall Length (without forks): 12 to 15 feet
Overall Width: 5 to 8 feet
Height to Top of Overhead Guard: 7 to 9 feet
Wheelbase: 6 to 8 feet
Ground Clearance: Approximately 9 to 14 inches
Wheels and Tires
Tire Type: Pneumatic
Tire Size: Front: Approximately 12 to 16 inches; Rear: Approximately 10 to 14 inches
Axle Configuration: 2WD or 4WD depending on model
Capacity
Fuel Tank Capacity: 20 to 25 gallons
Hydraulic Oil Tank: 15 to 20 gallons
Brakes
Service Brake: Hydraulic, Wet Disc
Parking Brake: Mechanical Lever Type
Operational Features
Steering: Power Steering
Transmission: Power Shift or Hydrostatic
Control Levers: Multi-function for Enhanced Precision
Optional Attachments
Side Shifter
Rotator
Fork Positioner
Specialized Forks
Supreme Forklift & Equipment Sales Dept. 25250 S Power Rd Queen Creek, AZ 85142
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Turning Radius: Varies, generally spacious due to rough terrain capabilities
Features
Drive: 2WD or 4WD options
Tires: Pneumatic tires suitable for rough terrain
Fork Length: Varies, based on specification
Operator Cab: Enclosed with ergonomic controls
Safety: Equipped with standard safety features including alarms and mirrors
Hydraulics
Hydraulic System: Standard with auxiliary hydraulics for attachments
Hydraulic Pump: Gear type or variable displacement
Forklift Pro, Inc. Sales Department 9801 Industrial Drive Pineville, NC 28134
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Overall Length: Approximately 16.5 feet (excluding forks)
Overall Height (with cabin): Approximately 12 feet
Wheelbase: Approximately 10.3 feet
Weight
Operating Weight: Approximately 82,500 lbs
Performance
Load Capacity: 80,000 lbs
Travel Speed: Approximately 17 mph (unladen)
Turning Radius: Approximately 15 feet
Engine
Engine Type: Diesel
Engine Power: Approximately 241 hp
Fuel Tank Capacity: Approximately 55 gallons
Tires
Type: Pneumatic
Front Tire Size: 12.00x20
Rear Tire Size: 12.00x20
Forks
Fork Length: Varies
Standard Fork Width: Approximately 8 inches
Trivium Equipment Richard Wroble 2451 W Peterson Dr. Apache Junction, AZ 85120
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height (To top of overhead guard): Approximately 87 inches
Performance
Travel Speed (Loaded): 11 mph
Travel Speed (Unloaded): 12 mph
Load Center: 24 inches
Turning Radius: Approximately 87 inches
Wheels and Tires
Front Tires: Pneumatic
Rear Tires: Pneumatic
Wheelbase: Approximately 63 inches
Weight
Service Weight: Approximately 8,800 lbs (with standard equipment and no load)
Features
Operator's compartment: Ergonomically designed
Adjustable steering column
Seat with suspension
Optional sideshift available
Supreme Forklift & Equipment Sales Dept. 25250 S Power Rd Queen Creek, AZ 85142
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close