The Clark SSX16 is a power-dense motor designed for industrial and commercial applications. Its compact size allows for easy integration into various systems where space is limited. The motor is known for its high efficiency and durability, making it suitable for demanding environments. Additionally, it offers advanced thermal management and low maintenance requirements, enhancing long-term reliability and performance.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Dimensions
Overall Length: Approximately 87 inches (excludes forks)
Overall Width: 42 inches
Height to Top of Overhead Guard: 83 inches
Ground Clearance: Approximately 3 inches
Powertrain
Engine Type: Internal Combustion
Fuel Type: LPG (Liquefied Petroleum Gas)
Engine Power: Approximately 50 horsepower
Capacity
Load Capacity: 4,000 lbs
Load Center: 24 inches
Performance
Travel Speed: Approximately 11 mph (unladen)
Lift Speed: Approximately 105 feet per minute (unladen)
Lowering Speed: Approximately 98 feet per minute (unloaded)
Gradeability: 20% (laden)
Tires
Tire Type: Cushion
Front Tire Size: 18 x 7 x 12.125 inches
Rear Tire Size: 15 x 5 x 11.25 inches
Brakes
Service Brake: Hydraulic
Parking Brake: Mechanical
Hydraulics
Hydraulic System Pressure: Approximately 2,500 psi
Operator Area
Seat Type: Adjustable suspension seat
Steering: Hydrostatic power steering
TB Forklifts Antonio Borboa: 281-746-6799 5410 Mary Francis Dr Houston, TX 77039
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Front Tire Size: varies based on tire configuration
Rear Tire Size: varies based on tire configuration
Steering and Brakes
Steering: Hydrostatic Power Steering
Brakes: Hydraulic Drum
Forks
Fork Length: varies
Adjustable Fork Width: available
Fork Thickness: varies based on configuration
Holt of California David: 916-545-3065 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
#2688 Clark C500-H55, 5.5K Cushion tire forklift with a 130”
Model Number: C500-55
Manufacturer: Clark
Type: Forklift
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type Used: LP Gas
Dimensions
Overall Length: Approximately 127 inches
Overall Width: Approximately 45 inches
Overall Height (to top of overhead guard): Approximately 84 inches
Overall Height (with forks lowered): Approximately 50 inches
Wheelbase: Approximately 70 inches
Ground Clearance: Approximately 4 inches
Performance
Load Capacity: 5000 lbs
Travel Speed (Loaded/Unloaded): Up to 11 mph
Lifting Speed (Loaded/Unloaded): Approximately 90/110 feet per minute
Gradeability (Loaded): Approximately 20%
Engine
Engine Type: Internal Combustion
Fuel System: LP Gas
Cooling System: Liquid Cooled
Tires
Tire Type: Cushion Tires
Tire Size (Front): 18x7-8
Tire Size (Rear): 16x5-10.5
Steering and Control
Steering Type: Hydraulic Power Steering
Control Type: Lever Controls
Brakes
Service Brake: Hydraulic Drum
Parking Brake: Mechanical Hand Operated
Additional Features
Operator Compartment: Ergonomic Seat with Adjustable Settings
Instrumentation: Full Dash Instrument Panel
Western Material Handling Dennis Firkins: 303-625-6477 1113 N. College Ave Ft Collins, CO 80524
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height (with Cab): Approximately 105 inches
Wheelbase: Approximately 96 inches
Engine and Powertrain
Engine Type: Diesel engine
Transmission Type: Automatic transmission
Drive Type: 2WD (Two-Wheel Drive)
Tires
Tire Type: Pneumatic
Front Tire Size: Typically varies
Rear Tire Size: Typically varies
Performance
Lift Capacity: Approximately 30,000 lbs
Travel Speed (Loaded): Approximately 15 mph
Travel Speed (Unloaded): Approximately 20 mph
Forks
Fork Length: Varies
Fork Width: Approximately 12 inches
Other Specifications
Operator Seat: Adjustable with safety belt
Steering: Hydraulic power steering
Brakes: Hydraulic disc brakes
Hydraulic System: Adjustable flow rate control
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Overall Height (overhead guard): Approximately 110 - 122 inches
Wheelbase: Approximately 90 - 100 inches
Capacity
Lifting Capacity: 20,000 lbs
Tires
Type: Pneumatic Tires
Front Tire Size: Typically 8.25 x 15 inches
Rear Tire Size: Typically 8.25 x 15 inches
Performance
Travel Speed (laden/unladen): Approximately 12 - 15 mph
Lift Speed (laden/unladen): Approximately 50 - 65 feet per minute
Gradeability (laden): Approximately 25%
Forks
Fork Length: Varies
Fork Width: Approximately 6 inches
Other Features
Operator Compartment: Sit Down
Steering: Power steering
Brakes: Hydraulic brakes
National Equipment, LLC Jim Gagliardi: 559-517-3272 12201 Hwy 99 (at Ave 12) Madera, CA 93638
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Height to Top of Overhead Guard: Approximately 85 inches
Wheelbase: Approximately 58 inches
Capacities
Load Capacity: 2,500 lbs
Fuel Tank Capacity: Approximately 33 lbs (LP Gas)
Performance
Travel Speed: Up to 10 mph
Lifting Speed: Up to 80 feet per minute
Tires
Tire Type: Cushion
Tire Size Front: 18 x 7 inches
Tire Size Rear: 15 x 5 inches
Operator Comfort
Seat: Adjustable with safety belt
Steering: Power steering
Additional Features
Hydraulic Controls: Fingertip hydraulic controls
Lighting: Equipped with LED lights
Select Equipment Sales Sales Dept.: 657-212-2302 6911 8th St Buena Park, CA 90620
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
2019 Clark OSX15 , 131/312 mast, 54" wide, Wire Guided
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Equipment
Close