New Feature: Eliftruck Price Point Introducing Eliftruck Price Point — the forklift price estimator built for buyers, sellers, and fleet managers. Instantly get accurate, market-based valuations with just a few details.
Try It Now Don’t overpay or undersell—discover your forklift’s true market value in seconds. Click on the PRICE POINT orange button below to get started.
In the material handling industry, "Docker forklifts" typically refer to forklifts specifically designed or adapted for operations around docks, particularly in loading and unloading goods from trucks, containers, or ships. These forklifts often feature specific specifications and attachments suitable for dock work, such as shorter turning radii for maneuvering in tight spaces and enhanced lifting capacities for handling heavier loads typical at these transfer points. The emphasis for docker forklifts is on durability, reliability, and flexibility, allowing them to efficiently handle a variety of material handling tasks in bustling dock environments.
2024 Unicarrier SCX40N2, 87.6/201, SS, EE rated, 4W
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Material Solutions INC Joe Depinto: 609-400-4542 28C Industrial Drive Hamilton, NJ 08619
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 107 inches (without forks)
Overall Width: Approximately 42 inches
Height to Top of Overhead Guard: Approximately 90 inches
Ground Clearance: Approximately 3.5 inches
Wheelbase: Approximately 60 inches
Performance
Load Capacity: 3,000 lbs
Drive Speed: Approximately 6 mph (loaded/unloaded)
Turning Radius: Approximately 62 inches
Fork Specifications
Fork Length: Varies
Fork Width: Approximately 4 inches
Fork Spread: Adjustable, typically between 8 to 40 inches
Tires
Tire Type: Polyurethane
Tire Configuration: Double wheel front, single wheel rear
Operator Comfort and Controls
Stand-up Operation
Ergonomic Controls
Visibility: Designed for enhanced operator visibility
Comfort: Cushioned platform
Safety Features
Anti-roll technology
Emergency Stop Button
Operator Presence Sensor
Welch Equipment Company Inc Keith Fine: 719-625-2311 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Overall Length: Approximately 107 inches (without forks)
Overall Width: Approximately 42 inches
Height to Top of Overhead Guard: Approximately 90 inches
Ground Clearance: Approximately 3.5 inches
Wheelbase: Approximately 60 inches
Performance
Load Capacity: 3,000 lbs
Drive Speed: Approximately 6 mph (loaded/unloaded)
Turning Radius: Approximately 62 inches
Fork Specifications
Fork Length: Varies
Fork Width: Approximately 4 inches
Fork Spread: Adjustable, typically between 8 to 40 inches
Tires
Tire Type: Polyurethane
Tire Configuration: Double wheel front, single wheel rear
Operator Comfort and Controls
Stand-up Operation
Ergonomic Controls
Visibility: Designed for enhanced operator visibility
Comfort: Cushioned platform
Safety Features
Anti-roll technology
Emergency Stop Button
Operator Presence Sensor
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Travel Speed: Approximately 7.5 miles per hour unloaded
Dimensions
Overall Length: 84.7 inches
Overall Width: 43.3 inches
Height to Top of Overhead Guard: 86.4 inches
Turning Radius: 67 inches
Battery
Battery Voltage: 36 volts
Battery Capacity: 930 ampere-hours
Weight
Overall Weight (without battery): Approximately 6,945 lbs
Tires
Tire Type: Cushion
Tire Size (Front): 18 x 7-8 inches
Tire Size (Rear): 15 x 4.5-8 inches
Forks
Fork Length: Varies
Adjustable Fork Spread: Approximately 12-36 inches
Salt Lake City, UT Dillon Toyota Lift : 801-972-1930 2640 California Avenue Salt Lake City, UT 84104
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Overall Length: Around 80 inches (varies with fork length)
Overall Width: Approximately 48 inches
Height (Overhead Guard): Approximately 90 inches
Ground Clearance: Roughly 3.5 inches
Performance
Load Capacity: 4,000 lbs
Drive Speed (Loaded/Unloaded): Approximately 6.5 mph
Turning Radius: Around 60 inches
Battery
Type: Electric
Voltage: 36V
Capacity: Varies based on specific battery option
Chassis
Wheelbase: Approximately 55 inches
Tire Type: Cushion
Number of Wheels: 3
Safety and Comfort
Operator Compartment: Stand-up configuration
Control: End Control
Braking System: Regenerative/Electromechanical
Somerset Equipment Sales - Illinois George Rieber: 630-560-4680 1375 Kingsland Batavia , IL 60510
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close