The Clark C30D is a diesel-powered forklift known for its durability and reliability in handling heavy loads. It typically features a robust engine, a high lifting capacity, and ergonomic design to enhance operator comfort and efficiency. The forklift is also recognized for its strong build quality and advanced hydraulic systems, making it suitable for demanding industrial environments.
Overall Height (with Cab): Approximately 105 inches
Wheelbase: Approximately 96 inches
Engine and Powertrain
Engine Type: Diesel engine
Transmission Type: Automatic transmission
Drive Type: 2WD (Two-Wheel Drive)
Tires
Tire Type: Pneumatic
Front Tire Size: Typically varies
Rear Tire Size: Typically varies
Performance
Lift Capacity: Approximately 30,000 lbs
Travel Speed (Loaded): Approximately 15 mph
Travel Speed (Unloaded): Approximately 20 mph
Forks
Fork Length: Varies
Fork Width: Approximately 12 inches
Other Specifications
Operator Seat: Adjustable with safety belt
Steering: Hydraulic power steering
Brakes: Hydraulic disc brakes
Hydraulic System: Adjustable flow rate control
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
D20472d CLARK 8k cushion triple mast LP gas 6-cyl engine
General Specifications
Model Number: C80
Manufacturer: Clark
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: LP Gas
Dimensions
Overall Length: Approximately varies depending on specific configuration
Overall Width: Approximately 55 inches
Height to Top Overhead Guard: Approximately 93 inches
Wheelbase: Approximately 82 inches
Ground Clearance: Approximately 5 inches
Performance
Load Capacity: Approximately 16,000 lbs
Travel Speed: Approximately 16 mph (unladen)
Lift Speed: Approximately 100 feet per minute (unladen)
Gradeability: Approximately 27% (laden)
Engine
Engine Type: Internal Combustion
Fuel Type: LP Gas
Horsepower: Approximately 97 HP
Tires
Type: Pneumatic
Tire Size Front: Approximately 28 x 12 - 22
Tire Size Rear: Approximately 8.25 x 15
Other Features
Operator Compartment: Ergonomic Design
Seat: Adjustable with Suspension
Steering: Hydraulic Power Steering
Brakes: Hydraulic Drum
Western Material Handling Dennis Firkins: 303-625-6477 1113 N. College Ave Ft Collins, CO 80524
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Overall Height (overhead guard): Approximately 110 - 122 inches
Wheelbase: Approximately 90 - 100 inches
Capacity
Lifting Capacity: 20,000 lbs
Tires
Type: Pneumatic Tires
Front Tire Size: Typically 8.25 x 15 inches
Rear Tire Size: Typically 8.25 x 15 inches
Performance
Travel Speed (laden/unladen): Approximately 12 - 15 mph
Lift Speed (laden/unladen): Approximately 50 - 65 feet per minute
Gradeability (laden): Approximately 25%
Forks
Fork Length: Varies
Fork Width: Approximately 6 inches
Other Features
Operator Compartment: Sit Down
Steering: Power steering
Brakes: Hydraulic brakes
National Equipment, LLC Jim Gagliardi: 559-517-3272 12201 Hwy 99 (at Ave 12) Madera, CA 93638
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 126-130 inches (varies with fork length)
Overall Width: Approximately 42 inches
Overall Height (to top of overhead guard): Approx. 85-90 inches
Wheelbase: Approximately 59-60 inches
Ground Clearance Under Mast: Approximately 4 inches
Performance
Load Capacity: Approximately 3,000 lbs
Travel Speed: Approx. 11-12 mph (Unloaded)
Gradeability: Approximately 15-20% (Loaded)
Wheels & Tires
Tire Type: Pneumatic
Front Tire Size: Approximately 7.00-12
Rear Tire Size: Approximately 6.00-9
Number of Wheels: 4
Hydraulics
Hydraulic System Pressure: Approximately 2500-3000 psi
Operator Environment
Seating: Sit-down type with operator's seat
Steering: Power steering
All Lift Service Co. Inc. Denise Germano: 440-276-4522 x 122 4607 Hamann Pkwy. Willoughby, OH 44094
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Equipment
Close