The Clark S30 is known for its robust and durable design, making it suitable for various material handling tasks. It features a strong chassis, efficient engine, and advanced safety features such as operator presence sensing and enhanced visibility. Additionally, the S30 offers comfortable operator ergonomics with an adjustable seat and easy-to-use controls, contributing to higher productivity and reduced operator fatigue.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Height to Top of Overhead Guard: Approximately 85 inches
Wheelbase: Approximately 55 inches
Weight
Service Weight: Approximately 9,700 lbs
Tire Specifications
Tire Type: Pneumatic or Cushion
Front Tires: 7.00-12
Rear Tires: 6.00-9
Performance
Load Capacity: 3,000 lbs
Travel Speed: Approximately 11 mph
Load Center: 24 inches
Hydraulics
Hydraulic Pressure: Approximately 3,000 psi
Operator Controls
Power Steering: Hydrostatic
Fuel Tank Capacity
LPG Tank Capacity: Approximately 33 lbs
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
2019 CLARK C30
TRIPLE MAST 189" SIDE SHIFTER, 48" FORKS
Model: S30
Manufacturer: Clark
Type: Forklift
Engine Specifications
Engine Type: LPG / Dual Fuel
Engine Manufacturer: Mitsubishi
Cylinders: 4
Horsepower: Approximately 59 HP
Dimensions
Overall Length: Approximately 91 inches
Overall Width: Approximately 42 inches
Height to Top of Overhead Guard: Approximately 85 inches
Wheelbase: Approximately 55 inches
Weight
Service Weight: Approximately 9,700 lbs
Tire Specifications
Tire Type: Pneumatic or Cushion
Front Tires: 7.00-12
Rear Tires: 6.00-9
Performance
Load Capacity: 3,000 lbs
Travel Speed: Approximately 11 mph
Load Center: 24 inches
Hydraulics
Hydraulic Pressure: Approximately 3,000 psi
Operator Controls
Power Steering: Hydrostatic
Fuel Tank Capacity
LPG Tank Capacity: Approximately 33 lbs
#5003 Waterloo Iowa Ryan Vawter 2950 W Airline Highway Waterloo, IA 50703
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length to Fork Face: 8-9 feet approximately
Height to Top of Overhead Guard: 7-8 feet approximately
Ground Clearance: 5-6 inches approximately
Engine Specifications
Engine Type: Internal Combustion (IC)
Fuel Type: LPG (Liquefied Petroleum Gas)
Engine Power: 50-60 hp approximately
Performance
Load Capacity: 6,000 pounds
Travel Speed: 11-12 mph approximately
Lifting Speed: 100-120 feet per minute approximately
Gradeability: 20-25% approximately
Tires
Type: Pneumatic
Front Tire Size: 7.00x12 approximately
Rear Tire Size: 6.00x9 approximately
Hydraulic System
Pump Capacity: 15-20 gallons per minute approximately
Operating Pressure: 2,500 psi approximately
Weights
Service Weight: 8,000-9,000 pounds approximately
Fork Specifications
Fork Length: Varies
Fork Width: 4-5 inches approximately
Fork Thickness: 1.5-2 inches approximately
Operator Compartment
Steering: Hydraulic Power Steering
Seat: Adjustable, with seat belt
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length to Fork Face: 8-9 feet approximately
Height to Top of Overhead Guard: 7-8 feet approximately
Ground Clearance: 5-6 inches approximately
Engine Specifications
Engine Type: Internal Combustion (IC)
Fuel Type: LPG (Liquefied Petroleum Gas)
Engine Power: 50-60 hp approximately
Performance
Load Capacity: 6,000 pounds
Travel Speed: 11-12 mph approximately
Lifting Speed: 100-120 feet per minute approximately
Gradeability: 20-25% approximately
Tires
Type: Pneumatic
Front Tire Size: 7.00x12 approximately
Rear Tire Size: 6.00x9 approximately
Hydraulic System
Pump Capacity: 15-20 gallons per minute approximately
Operating Pressure: 2,500 psi approximately
Weights
Service Weight: 8,000-9,000 pounds approximately
Fork Specifications
Fork Length: Varies
Fork Width: 4-5 inches approximately
Fork Thickness: 1.5-2 inches approximately
Operator Compartment
Steering: Hydraulic Power Steering
Seat: Adjustable, with seat belt
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length to Fork Face: 8-9 feet approximately
Height to Top of Overhead Guard: 7-8 feet approximately
Ground Clearance: 5-6 inches approximately
Engine Specifications
Engine Type: Internal Combustion (IC)
Fuel Type: LPG (Liquefied Petroleum Gas)
Engine Power: 50-60 hp approximately
Performance
Load Capacity: 6,000 pounds
Travel Speed: 11-12 mph approximately
Lifting Speed: 100-120 feet per minute approximately
Gradeability: 20-25% approximately
Tires
Type: Pneumatic
Front Tire Size: 7.00x12 approximately
Rear Tire Size: 6.00x9 approximately
Hydraulic System
Pump Capacity: 15-20 gallons per minute approximately
Operating Pressure: 2,500 psi approximately
Weights
Service Weight: 8,000-9,000 pounds approximately
Fork Specifications
Fork Length: Varies
Fork Width: 4-5 inches approximately
Fork Thickness: 1.5-2 inches approximately
Operator Compartment
Steering: Hydraulic Power Steering
Seat: Adjustable, with seat belt
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Travel Speed (laden/unladen): Approximately 11/12 mph
Lifting Speed (laden/unladen): Approximately 95/108 feet per minute
Lowering Speed (laden/unladen): Approximately 100/90 feet per minute
Brakes
Service Brakes: Hydraulic
Parking Brakes: Mechanical Handle
Wheels and Tires
Tire Type: Pneumatic
Front Tires Size: 21x7-15
Rear Tires Size: 16x6-12.5
Steering
Steering Type: Hydrostatic Power Steering
Operator Features
Seat Type: Adjustable Suspension Seat
Dashboard: Multi-function Display
Supreme Forklift & Equipment Sales Dept. 25250 S Power Rd Queen Creek, AZ 85142
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length to Fork Face: 8-9 feet approximately
Height to Top of Overhead Guard: 7-8 feet approximately
Ground Clearance: 5-6 inches approximately
Engine Specifications
Engine Type: Internal Combustion (IC)
Fuel Type: LPG (Liquefied Petroleum Gas)
Engine Power: 50-60 hp approximately
Performance
Load Capacity: 6,000 pounds
Travel Speed: 11-12 mph approximately
Lifting Speed: 100-120 feet per minute approximately
Gradeability: 20-25% approximately
Tires
Type: Pneumatic
Front Tire Size: 7.00x12 approximately
Rear Tire Size: 6.00x9 approximately
Hydraulic System
Pump Capacity: 15-20 gallons per minute approximately
Operating Pressure: 2,500 psi approximately
Weights
Service Weight: 8,000-9,000 pounds approximately
Fork Specifications
Fork Length: Varies
Fork Width: 4-5 inches approximately
Fork Thickness: 1.5-2 inches approximately
Operator Compartment
Steering: Hydraulic Power Steering
Seat: Adjustable, with seat belt
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length to Fork Face: 8-9 feet approximately
Height to Top of Overhead Guard: 7-8 feet approximately
Ground Clearance: 5-6 inches approximately
Engine Specifications
Engine Type: Internal Combustion (IC)
Fuel Type: LPG (Liquefied Petroleum Gas)
Engine Power: 50-60 hp approximately
Performance
Load Capacity: 6,000 pounds
Travel Speed: 11-12 mph approximately
Lifting Speed: 100-120 feet per minute approximately
Gradeability: 20-25% approximately
Tires
Type: Pneumatic
Front Tire Size: 7.00x12 approximately
Rear Tire Size: 6.00x9 approximately
Hydraulic System
Pump Capacity: 15-20 gallons per minute approximately
Operating Pressure: 2,500 psi approximately
Weights
Service Weight: 8,000-9,000 pounds approximately
Fork Specifications
Fork Length: Varies
Fork Width: 4-5 inches approximately
Fork Thickness: 1.5-2 inches approximately
Operator Compartment
Steering: Hydraulic Power Steering
Seat: Adjustable, with seat belt
Trupar America Inc. Jay Handra 160 Wilson Rd Bentleyville, PA 15314
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length to Fork Face: 8-9 feet approximately
Height to Top of Overhead Guard: 7-8 feet approximately
Ground Clearance: 5-6 inches approximately
Engine Specifications
Engine Type: Internal Combustion (IC)
Fuel Type: LPG (Liquefied Petroleum Gas)
Engine Power: 50-60 hp approximately
Performance
Load Capacity: 6,000 pounds
Travel Speed: 11-12 mph approximately
Lifting Speed: 100-120 feet per minute approximately
Gradeability: 20-25% approximately
Tires
Type: Pneumatic
Front Tire Size: 7.00x12 approximately
Rear Tire Size: 6.00x9 approximately
Hydraulic System
Pump Capacity: 15-20 gallons per minute approximately
Operating Pressure: 2,500 psi approximately
Weights
Service Weight: 8,000-9,000 pounds approximately
Fork Specifications
Fork Length: Varies
Fork Width: 4-5 inches approximately
Fork Thickness: 1.5-2 inches approximately
Operator Compartment
Steering: Hydraulic Power Steering
Seat: Adjustable, with seat belt
Trupar America Inc. Jay Handra 160 Wilson Rd Bentleyville, PA 15314
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length Without Forks: Approximately 91 inches
Overall Width: Approximately 42 inches
Height to Top of OHG: Approximately 82 inches
Wheelbase: Approximately 55 inches
Ground Clearance: Approximately 4 inches
Capacity
Load Capacity: 3,000 pounds
Engine
Engine Type: 4-Cylinder Industrial Engine
Fuel Type: LPG or Optional Gasoline
Performance
Travel Speed: Approximately 11 mph (unladen)
Lift Speed: Approximately 110 feet per minute
Tires
Tire Type: Cushion
Tire Size Front: 18 x 7 x 12.125 inches
Tire Size Rear: 15 x 5 x 11.25 inches
Weights
Service Weight: Approximately 8,000 pounds
#5003 Waterloo Iowa Ryan Vawter 2950 W Airline Highway Waterloo, IA 50703
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close