The Clark C30CL is a forklift known for its durability and reliability, featuring a high-performance LP gas engine. It is designed for efficiency in material handling with a load capacity of 6,000 pounds. The forklift is equipped with a hydrostatic power steering system and an ergonomically designed operator compartment to enhance comfort and ease of use. Additionally, it includes wet disc brakes for improved safety and low maintenance requirements.
Overall Length to Fork Face: Approximately 89 inches
Overall Width: 42 inches
Overall Height: 86 inches
Wheelbase: 57 inches
Ground Clearance: 4 inches
Performance
Load Capacity: 6,000 lbs
Travel Speed: 11 mph (with load)
Gradeability: 27% (with load)
Tire Information
Tire Type: Cushion
Front Tire Size: 21 x 7 x 15 inches
Rear Tire Size: 16 x 5 x 10.5 inches
Hydraulic System
Hydraulic Tank Capacity: 10 gallons
System Pressure: 2,500 psi
Other Features
Operator Compartment: Ergonomically designed with easy-access controls
Steering: Hydrostatic power steering
Brakes: Wet disc brakes
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Overall Height (overhead guard): Approximately 110 - 122 inches
Wheelbase: Approximately 90 - 100 inches
Capacity
Lifting Capacity: 20,000 lbs
Tires
Type: Pneumatic Tires
Front Tire Size: Typically 8.25 x 15 inches
Rear Tire Size: Typically 8.25 x 15 inches
Performance
Travel Speed (laden/unladen): Approximately 12 - 15 mph
Lift Speed (laden/unladen): Approximately 50 - 65 feet per minute
Gradeability (laden): Approximately 25%
Forks
Fork Length: Varies
Fork Width: Approximately 6 inches
Other Features
Operator Compartment: Sit Down
Steering: Power steering
Brakes: Hydraulic brakes
National Equipment, LLC Jim Gagliardi 12201 Hwy 99 (at Ave 12) Madera, CA 93638
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
2019 Clark OSX15 , 131/312 mast, 54" wide, Wire Guided
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Overall Length: Approximately 126-130 inches (varies with fork length)
Overall Width: Approximately 42 inches
Overall Height (to top of overhead guard): Approx. 85-90 inches
Wheelbase: Approximately 59-60 inches
Ground Clearance Under Mast: Approximately 4 inches
Performance
Load Capacity: Approximately 3,000 lbs
Travel Speed: Approx. 11-12 mph (Unloaded)
Gradeability: Approximately 15-20% (Loaded)
Wheels & Tires
Tire Type: Pneumatic
Front Tire Size: Approximately 7.00-12
Rear Tire Size: Approximately 6.00-9
Number of Wheels: 4
Hydraulics
Hydraulic System Pressure: Approximately 2500-3000 psi
Operator Environment
Seating: Sit-down type with operator's seat
Steering: Power steering
All Lift Service Co. Inc. Denise Germano 4607 Hamann Pkwy. Willoughby, OH 44094
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Front Tire Size: varies based on tire configuration
Rear Tire Size: varies based on tire configuration
Steering and Brakes
Steering: Hydrostatic Power Steering
Brakes: Hydraulic Drum
Forks
Fork Length: varies
Adjustable Fork Width: available
Fork Thickness: varies based on configuration
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Equipment
Close