The Daewoo G25P-3 is known for its reliable performance and robust design, often used in industrial and warehouse settings. It features a strong engine, typically a 4-cylinder, offering good fuel efficiency and low emissions. The forklift is appreciated for its ergonomic design, which enhances operator comfort and ease of use, with intuitive controls and a comfortable seat. Additionally, it often includes advanced safety features such as improved visibility for the operator, stability control, and durable construction to handle various lifting tasks efficiently.
Lift Speed (unloaded): Approximately 98.4 feet/min
Gradeability (loaded): Approximately 20%
Engine:
Engine Model: Hyundai Engine (if spec applicable)
Power: Approximately 60 HP
Number of Cylinders: 4
Transmission:
Type: Powershift
Number of Speeds: 1 forward, 1 reverse
Brakes:
Service Brake: Hydraulic
Parking Brake: Mechanical Lever
Tires:
Type: Pneumatic
Tire Size: Approximately 28x9-15 (front) / 6.50-10 (rear)
Hydraulic System:
Hydraulic Pump Capacity: Approximately 8.5 gallons/min
AHP Enterprises Arthur Peagler 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 135 inches (varies with fork length)
Overall Width: Approximately 47 inches
Overall Height to Top of Overhead Guard: Approximately 85 inches
Wheelbase: Approximately 67 inches
Capacity:
Load Capacity: 5,000 lbs
Performance:
Travel Speed: Approximately 12 miles per hour
Lift Speed: Approximately 118 feet per minute
Weights:
Operating Weight: Approximately 8,500 lbs
Tires:
Type: Pneumatic Tires
Tire Size Front: Approximately 7.00-12
Tire Size Rear: Approximately 6.00-9
Lee Cassam & Associates Lee Cassam 2108 Delante St Haltom City, TX 76117
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Recent engine rebuild great machine knee deep in rubber
General Information
Model Number: GC20
Manufacturer: Daewoo
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: LP Gas
Dimensions
Overall Length: 120 inches
Overall Width: 42 inches
Overall Height (overhead guard): 85 inches
Wheelbase: 63 inches
Capacity
Load Capacity: 4,000 lbs
Engine Specifications
Engine Type: Internal Combustion
Engine Model: Varies
Performance
Travel Speed: 11 mph
Lifting Speed (loaded): 98 feet per minute
Lifting Speed (unloaded): 108 feet per minute
Turning Radius: 87 inches
Tires
Front: Pneumatic
Rear: Pneumatic
Forks
Fork Length: Varies
AHP Enterprises Arthur Peagler 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type: LP Gas
Dimensions
Overall Length: 115 inches
Overall Width: 41 inches
Overall Height: 83 inches
Wheelbase: 57 inches
Turning Radius: 85 inches
Performance
Load Capacity: 3,000 lbs
Travel Speed: 11 mph
Lift Speed: 59 feet/minute
Gradeability: 23%
Powertrain
Engine Model: K21
Engine Power: 46 HP
Transmission Type: Powershift
Wheels and Tires
Tire Type: Cushion
Number of Wheels: 4
Brakes
Service Brake: Hydraulic
Parking Brake: Mechanical
Hydraulic System
Hydraulic Pump Flow: 13 gallons/minute
Relief Valve Pressure: 2,500 psi
Forks
Fork Length: Varies
Fork Width: 4 inches
Fork Thickness: 1.4 inches
Ace Equipment Chase S 1100 N Loop 12 Irving, TX 76061
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Friskney Equipment Co Sales 101 Woodhull Dr Angola, IN 46703-934
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
#5001 Bettendorf Iowa Dennis Marriott 5875 State St Bettendorf, IA 52722
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height (top of overhead guard): 85.8 inches
Wheelbase: 65 inches
Weight: 8,150 lbs
Load Capacity: 5,000 lbs
Fork Length: Varies
Performance:
Max Travel Speed (laden/unladen): 11.8 mph / 12.4 mph
Max Gradeability (laden): 25%
Steering and Tires:
Tire Type: Pneumatic
Steering Type: Hydraulic Power Steering
Operational Features:
Transmission: Powershift with 1F/1R Stages
Brake Type: Hydraulic
Discount Forklift Sales Dept 4905 Lima St Denver, CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height (Overhead Guard): Approximately 83 inches
Wheelbase: Approximately 63 inches
Weight
Service Weight: Approximately 8,100 lbs
Tire Information
Tire Type: Pneumatic
Tire Size Front: Approximately 7.00x12
Tire Size Rear: Approximately 6.00x9
Performance
Load Capacity: 5,000 lbs
Travel Speed: Approximately 11 mph (loaded)
Lift Speed: Approximately 95 feet/minute (loaded)
Gradeability: Approximately 20% (loaded)
Forks
Fork Length: Varies
Discount Forklift Sales Dept 4905 Lima St Denver, CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
D21501d CLEAAN 2000 DAEWOO GC25S-3 5K CUSH 3STG SS LP
General
Model Number: GC25S-3
Manufacturer: Daewoo
Type: Forklift
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Dimensions
Overall Length: 108 inches
Overall Width: 41.5 inches
Height to Top of Overhead Guard: 83 inches
Wheelbase: 66 inches
Ground Clearance: 3.5 inches
Performance
Load Capacity: 5,000 lbs
Minimum Turning Radius: 87 inches
Travel Speed Loaded: 11 mph
Travel Speed Unloaded: 11.2 mph
Gradeability Loaded: 15%
Powertrain
Engine Type: Internal Combustion
Engine Model: G424I
Fuel Type: LPG
Transmission Type: Powershift
Number of Speeds: 1 Forward / 1 Reverse
Tires
Tire Type: Cushion
Front Tire Size: 21x7x15
Rear Tire Size: 16x6x10.5
Hydraulic System
Hydraulic Pressure: 2250 psi
Hydraulic Flow Rate: 14.5 gpm
Western Material Handling Dennis Firkins 1113 N. College Ave Ft Collins, CO 80524
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Western Material Handling Dennis Firkins 1113 N. College Ave Ft Collins, CO 80524
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Taylor's Forklift Repairs Inc. Cameron Taylor 1012 Taylor's Creek Drive Greenville, NC 28590
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close