The Clark C18L is notable for its robust performance and durability, making it suitable for various material handling applications. It is equipped with a powerful engine and features a rugged design, ensuring reliability and efficiency in warehouse and industrial settings. The forklift offers excellent operator comfort with ergonomic controls and a spacious cabin, enhancing productivity during extended use. Additionally, its efficient powertrain and low maintenance requirements contribute to cost-effective operation over time.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
D20472d CLARK 8k cushion triple mast LP gas 6-cyl engine
General Specifications
Model Number: C80
Manufacturer: Clark
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: LP Gas
Dimensions
Overall Length: Approximately varies depending on specific configuration
Overall Width: Approximately 55 inches
Height to Top Overhead Guard: Approximately 93 inches
Wheelbase: Approximately 82 inches
Ground Clearance: Approximately 5 inches
Performance
Load Capacity: Approximately 16,000 lbs
Travel Speed: Approximately 16 mph (unladen)
Lift Speed: Approximately 100 feet per minute (unladen)
Gradeability: Approximately 27% (laden)
Engine
Engine Type: Internal Combustion
Fuel Type: LP Gas
Horsepower: Approximately 97 HP
Tires
Type: Pneumatic
Tire Size Front: Approximately 28 x 12 - 22
Tire Size Rear: Approximately 8.25 x 15
Other Features
Operator Compartment: Ergonomic Design
Seat: Adjustable with Suspension
Steering: Hydraulic Power Steering
Brakes: Hydraulic Drum
Western Material Handling Dennis Firkins: 303-625-6477 1113 N. College Ave Ft Collins, CO 80524
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Height to Top of Overhead Guard: Approximately 85 inches
Wheelbase: Approximately 58 inches
Capacities
Load Capacity: 2,500 lbs
Fuel Tank Capacity: Approximately 33 lbs (LP Gas)
Performance
Travel Speed: Up to 10 mph
Lifting Speed: Up to 80 feet per minute
Tires
Tire Type: Cushion
Tire Size Front: 18 x 7 inches
Tire Size Rear: 15 x 5 inches
Operator Comfort
Seat: Adjustable with safety belt
Steering: Power steering
Additional Features
Hydraulic Controls: Fingertip hydraulic controls
Lighting: Equipped with LED lights
Select Equipment Sales Sales Dept.: 657-212-2302 6911 8th St Buena Park, CA 90620
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 126-130 inches (varies with fork length)
Overall Width: Approximately 42 inches
Overall Height (to top of overhead guard): Approx. 85-90 inches
Wheelbase: Approximately 59-60 inches
Ground Clearance Under Mast: Approximately 4 inches
Performance
Load Capacity: Approximately 3,000 lbs
Travel Speed: Approx. 11-12 mph (Unloaded)
Gradeability: Approximately 15-20% (Loaded)
Wheels & Tires
Tire Type: Pneumatic
Front Tire Size: Approximately 7.00-12
Rear Tire Size: Approximately 6.00-9
Number of Wheels: 4
Hydraulics
Hydraulic System Pressure: Approximately 2500-3000 psi
Operator Environment
Seating: Sit-down type with operator's seat
Steering: Power steering
All Lift Service Co. Inc. Denise Germano: 440-276-4522 x 122 4607 Hamann Pkwy. Willoughby, OH 44094
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Lifting Speed: Approx. 118 feet per minute (Unladen)
Lowering Speed: Approx. 98 feet per minute (Unladen)
Gradeability: Approx. 34% (Laden)
Engine Specifications
Engine Type: Internal Combustion
Engine Model: PSI 4.3L V6
Engine Power: Approx. 97 HP
Fuel System: LPG
Cylinder Count: 6
Transmission
Transmission Type: Powershift
Number of Gears: 2 Forward / 1 Reverse
Tires
Tire Type: Pneumatic
Front Tires Size: Approx. 8.25-15
Rear Tires Size: Approx. 8.25-15
Brakes
Service Brake: Hydraulic
Parking Brake: Mechanical Hand Lever
Other Features
Steering: Hydraulic Power Steering
Operator Compartment: Suspension Seat
Instrumentation: Full Range
Western Material Handling Dennis Firkins: 303-625-6477 1113 N. College Ave Ft Collins, CO 80524
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close