All terrain forklifts are robust, versatile vehicles designed to transport materials across rough, uneven, or challenging terrains, such as construction sites, lumber yards, or farms. Unlike standard forklifts, all terrain models are equipped with large, rugged tires, enhanced suspension systems, and often four-wheel drive to ensure stability and traction on gravel, mud, snow, or other unstable surfaces. These forklifts typically have reinforced frames and powerful engines to handle heavy loads, making them essential for outdoor applications where traditional forklifts would struggle to operate effectively.
Forklift Exchange, Inc. Mike Flaska 116 W Hubbard St Chicago, IL 60654
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
New 2025 Toyota 2THD220-24 high capacity rough terrain truck
Model Number: 2THD220-24
Manufacturer: Toyota
Type: Forklift
Subtype: Rough Terrain (Vertical Mast)
Fuel Type: Diesel
Engine Specifications:
Engine Type: Diesel Engine
Displacement: Approximately 402 cubic inches
Cylinders: 6
Fuel System: Direct Injection
Dimensions and Weight:
Overall Length: Varies (depends on fork length)
Overall Width: Approximately 8 feet
Overall Height: Approximately 9 feet
Wheelbase: Approximately 11 feet
Ground Clearance: Approximately 15 inches
Operating Weight: Approximately 33,000 pounds
Performance:
Lifting Capacity: Approximately 22,000 pounds
Travel Speed: Up to 20 mph
Turning Radius: Approximately 17 feet
Tire Specifications:
Type: Pneumatic Tires for Rough Terrain
Front Tires Dimensions: Approximately 10 inches by 20 inches
Rear Tires Dimensions: Approximately 10 inches by 20 inches
Transmission:
Type: Powershift Transmission
Speeds: 3 Forward / 2 Reverse
Welch Denver Jack Thompson 4210 Carson Street Denver , CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
New 2025 Toyota 2THD220-24 high capacity rough terrain truck
Model Number: 2THD220-24
Manufacturer: Toyota
Type: Forklift
Subtype: Rough Terrain (Vertical Mast)
Fuel Type: Diesel
Engine Specifications:
Engine Type: Diesel Engine
Displacement: Approximately 402 cubic inches
Cylinders: 6
Fuel System: Direct Injection
Dimensions and Weight:
Overall Length: Varies (depends on fork length)
Overall Width: Approximately 8 feet
Overall Height: Approximately 9 feet
Wheelbase: Approximately 11 feet
Ground Clearance: Approximately 15 inches
Operating Weight: Approximately 33,000 pounds
Performance:
Lifting Capacity: Approximately 22,000 pounds
Travel Speed: Up to 20 mph
Turning Radius: Approximately 17 feet
Tire Specifications:
Type: Pneumatic Tires for Rough Terrain
Front Tires Dimensions: Approximately 10 inches by 20 inches
Rear Tires Dimensions: Approximately 10 inches by 20 inches
Transmission:
Type: Powershift Transmission
Speeds: 3 Forward / 2 Reverse
Welch Denver Jack Thompson 4210 Carson Street Denver , CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
30,000 lb with Triple Stage Mast new tires, and low hours
General Specifications
Model Number: DCE 140-6
Manufacturer: Kalmar
Type: Forklift
Subtype: Rough Terrain (Vertical Mast)
Fuel Type: Diesel
Engine
Engine Type: Diesel
Engine Power: Approximately 214 horsepower
Displacement: Typically around 7.2 liters (440 cubic inches)
Emission Standard: Tier IV Final/Stage V (specifications may vary)
Dimensions
Overall Length: Varies
Overall Width: Approximately 9 feet
Overall Height: Approximately 11 feet (cab height)
Wheelbase: Approximately 11.5 feet
Ground Clearance: Approximately 13 inches
Performance
Lift Capacity: Approximately 31,000 pounds
Travel Speed: Approximately 15 mph
Gradeability: Up to 30%
Operational Details
Steering System: Hydraulic power steering
Braking System: Wet disc brakes
Transmission: Hydrodynamic, automatic powershift
Axle Configuration: 4x4
Tires
Tire Type: Pneumatic, rough terrain
Tire Size: Typically 14.00-24
Hydraulic System
Hydraulic System Pressure: Approximately 3500 psi
Hydraulic Tank Capacity: Around 40 gallons
Cabin Features
Operator Seat: Adjustable and ergonomic
Controls: Joystick or lever-operated control system
Climate Control: Air conditioning and heating available
Visibility: 360-degree visibility with large windows
Port Equipment, Inc. Keli Taylor 937 N. Henry Ford Ave Wilmington, CA 90744
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Used Taylor TXH350L high capacity pneumatic forklift
General Information
Model: TXH350L
Manufacturer: Taylor
Type: Forklift
Engine
Engine Type: Diesel
Drive: 4x2
Dimensions
Length: Varies
Width: 10 feet
Height: 12 feet
Performance
Lifting Capacity: 35,000 lbs
Power: 200 hp
Travel Speed: 20 mph
Weight & Capacity
Operating Weight: 38,000 lbs
Fuel Capacity: 82 gallons
Wheels and Tires
Tire Type: Pneumatic
Front Tire Size: 12 inches
Rear Tire Size: 9 inches
Operator Environment
Seating: Adjustable deluxe seat
Steering: Tilt steering wheel
Welch Denver Jack Thompson 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Power Output: Approximately 223 horsepower (166 kW)
Torque: Varies
Fuel Capacity: Approx. 65 gallons
Performance
Load Capacity: Up to 36,000 lbs
Travel Speed (Loaded): Approx. 18 mph
Lift Speed (Loaded): Varies
Gradeability: Varies based on load
Dimensions
Overall Width: Approx. 8 feet 6 inches
Overall Length: Approx. 17 feet (excluding forks)
Wheelbase: Approx. 12 feet
Ground Clearance: Approx. 1.5 feet
Fork Specifications
Fork Length: Varies
Fork Width: Varies
Fork Thickness: Varies
Chassis and Tires
Tire Type: Pneumatic, Rough Terrain
Number of Wheels: 4
Steering: Hydraulic Power Steering
Operator Features
Cab: Enclosed or Open options
Seat Type: Adjustable suspension seat
Controls: Ergonomic joystick or lever controls
Display: Digital for engine diagnostics and operations
Safety and Compliance
Braking System: Hydraulic wet disc brakes
Audible Reverse Alarm: Standard
ROPS/FOPS: Standard for operator protection
Port Equipment, Inc. Keli Taylor 937 N. Henry Ford Ave Wilmington, CA 90744
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Port Equipment, Inc. Keli Taylor 937 N. Henry Ford Ave Wilmington, CA 90744
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Used Taylor X360L high capacity pneumatic forklift
Model Number: X360L
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel
General Dimensions
Overall Length: 21 feet
Overall Width: 8 feet
Overall Height: 10 feet
Wheelbase: 12 feet
Ground Clearance: 12 inches
Weight: 42,000 lbs
Turning Radius: 14 feet
Performance
Load Capacity: 36,000 lbs
Travel Speed: 15 mph
Lifting Speed: 65 feet/min
Gradeability: 25%
Engine
Engine Type: Diesel
Engine Power: 200 HP
Cylinder Displacement: 9.0 liters
Fuel Tank Capacity: 100 gallons
Tires
Tire Type: Pneumatic
Tire Size (Front): 12.00-20
Tire Size (Rear): 12.00-20
Number of Wheels: 4
Forks
Fork Length: Varies
Fork Width: 8 inches
Fork Thickness: 2.5 inches
Adjustable Fork Spread: 40 inches
Welch Denver Jack Thompson 4210 Carson Street Denver , CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
New 2024 Taylor X550M, high capacity pneumatic forklift
General Information
Model Number: X550M
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel
Dimensions
Length to Fork Face: 179 inches
Overall Width: 88 inches
Overall Height: 124 inches
Ground Clearance: 13 inches
Wheelbase: 126 inches
Weights
Operating Weight: 55,000 lbs
Counterweight: 14,000 lbs
Engine
Engine Manufacturer: Cummins
Engine Model: QSB6.7
Engine Power: 173 HP
Performance
Rated Load Capacity: 55,000 lbs
Travel Speed: 20 mph
Turning Radius: 14 feet
Tires
Tire Type: Pneumatic
Tire Size (Front): 12.00 x 20
Tire Size (Rear): 12.00 x 20
Forks
Fork Length: varies
Fork Width: 7 inches
Fork Thickness: 3 inches
Hydraulic System
Pump Capacity: 45 gallons per minute
Hydraulic Tank Capacity: 60 gallons
Brakes
Service Brakes: Wet Disc
Parking Brake: Mechanical Lever
Welch Denver Jack Thompson 4210 Carson Street Denver , CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
New 2024 Taylor X550M, high capacity pneumatic forklift
General Information
Model Number: X550M
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel
Dimensions
Length to Fork Face: 179 inches
Overall Width: 88 inches
Overall Height: 124 inches
Ground Clearance: 13 inches
Wheelbase: 126 inches
Weights
Operating Weight: 55,000 lbs
Counterweight: 14,000 lbs
Engine
Engine Manufacturer: Cummins
Engine Model: QSB6.7
Engine Power: 173 HP
Performance
Rated Load Capacity: 55,000 lbs
Travel Speed: 20 mph
Turning Radius: 14 feet
Tires
Tire Type: Pneumatic
Tire Size (Front): 12.00 x 20
Tire Size (Rear): 12.00 x 20
Forks
Fork Length: varies
Fork Width: 7 inches
Fork Thickness: 3 inches
Hydraulic System
Pump Capacity: 45 gallons per minute
Hydraulic Tank Capacity: 60 gallons
Brakes
Service Brakes: Wet Disc
Parking Brake: Mechanical Lever
Welch Denver Jack Thompson 4210 Carson Street Denver , CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Welch Denver Jack Thompson 4210 Carson Street Denver , CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
National Equipment, LLC Jim Gagliardi 12201 Hwy 99 (at Ave 12) Madera, CA 93638
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Instrument Display: Multi-functional digital display
Niagara Frontier Equipment Sales, Inc. Keith Hetrick Jr. 4060 Lake Avenue Lockport, NY 14094
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
National Equipment, LLC Jim Gagliardi 12201 Hwy 99 (at Ave 12) Madera, CA 93638
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Hydraulic System Pressure: Approximately 3,000 psi
Operational Features
Power Steering: Yes
Two-Wheel Drive/Steering: Yes
Fuel Capacity: Approximately 25 gallons
Ironworks Trading Corporation Jon Bordeaux 1160 Harmony Rd Norfolk, VA 23502
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.