The Hitachi ZX250 LC-6N is known for its advanced hydraulic system, which enhances fuel efficiency and increases the overall productivity of the excavator. It features a robust and reliable engine that adheres to stringent emission standards, offering a reduced environmental impact without compromising on power. Additionally, the ZX250 LC-6N is equipped with a refined cab design that improves operator comfort and visibility, enhancing safety and efficiency during operations. It also offers a durable undercarriage and reinforced boom and arm, contributing to its longevity and suitability for demanding job sites.
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height: 82.7 inches (to top of overhead guard)
Turning Radius: 78.3 inches
Wheelbase: 55.1 inches
Performance Specifications
Load Capacity: 3,500 lbs
Load Center: 24 inches
Travel Speed: Approximately 10.5 mph (no load)
Tires
Tire Type: Cushion
Front Tires: Dual 18x7-8
Rear Tires: 16x5-10.5
Hydraulics
Main Relief Pressure: Approximately 2,490 PSI
Hydraulic Tank Capacity: 8.2 gallons
Steering
Type: Hydrostatic power steering
Brakes
Service Brake: Hydraulic
Parking Brake: Mechanical, hand-operated
Fork Specifications
Fork Length: Varies
Fork Width: Standard varies
Forklifts Parts & Equipment Arturo: 786-475-8799 7695 NW 63 St. Miami, FL 33166
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
KMC Equipment Kevin Quinn: 979-224-3765 6101 E State Hwy 21 Bryan, TX 77808
Chicago Industrial Equipment Justin Cyrnek: 815 569 6499 600 Oakwood Ct Rockdale, IL 60436
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Hydraulic Cycle Time: Approximately 10 seconds (total)
Hydraulic System Pressure: Approximately 3,336 psi
Hydraulic Pump Flow: Approximately 44 gallons per minute
Fuel and Fluids
Fuel Tank Capacity: Approximately 65 gallons
Hydraulic Oil Tank Capacity: Approximately 21 gallons
Tires
Tire Size: 20.5 R25
Cab and Controls
ROPS/FOPS Certified Cab
Adjustable Steering Column
Air Conditioning
J&J Truck Sales, Inc. Forrest Dodson: 434-215-0641 11453 US Hwy. 29 Chatham, VA 24531
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Main Pumps: 2 variable displacement axial piston pumps
Hydraulic Flow: 61.8 gallons per minute
Pressure Setting: 4,970 psi
Capacities
Fuel Tank: 106 gallons
Hydraulic Oil Tank: 38 gallons
Tracks
Track Shoe Width: 23.6 inches
Number of Shoes Per Side: 49
Shoes Type: Triple grouser
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Bucket Capacity: Varies (typically around 0.9 cu yd)
Maximum Travel Speed: 22.4 mph (36 km/h)
Gradeability: 30% (maximum uphill grade)
Hydraulic System:
System Type: Closed Center
Pump Flow Rate: 70.6 GPM (267 L/min)
Operating Pressure: 4,000 psi (275 bar)
Transmission:
Type: Automatic
Gear Type: 2-speed
Cab Features:
Air Conditioning: Standard
Visibility: Large windows for improved sight lines
Operator Seat: Adjustable with high back support
Chassis:
Axle Configuration: 4x4
Frame Type: Welded steel frame
Other Features:
Tool Carrier: Yes
Attachment Options: Wide variety available
Service Interval: 500 hours
National Lift Equipment Sales: (215) 544-2708 300 Pond St. Bristol, PA 19007
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Cab Design: Ergonomically designed for operator comfort
Control System: Advanced hydraulic control for precision
Undercarriage: Heavy-duty for increased stability
Maintenance: Easy access for routine checks and servicing
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.