New Feature: Eliftruck Price Point
Introducing Eliftruck Price Point — the forklift price estimator built for buyers, sellers, and fleet managers. Instantly get accurate, market-based valuations with just a few details.

Try It Now
Don’t overpay or undersell—discover your forklift’s true market value in seconds. Click on the PRICE POINT orange button below to get started.
Search Across All Categories
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
CAPACITY RANGE
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
minimum raised height
ANY
Minus Plus
ANY 500
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
CAPACITY RANGE
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
CAPACITY RANGE
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
CAPACITY RANGE
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus

97 Forklifts and Material Handling Equipment For Sale

Browse our complete selection of low priced used forklifts, lift trucks & material handling products for sale at locations near you. Compare prices here!
sort by:
0 SELECTED
CLEAR
SHARE
COMPARE
2016 Doosan DX180 LC
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
26038
MAKE:
Doosan
MODEL:
DX180 LC
HOURS:
847 Hrs
PRICE
$149,900 USD
  • Engine
    • Make: Doosan
    • Model: DL06
    • Type: Diesel Engine
    • Power: Approximately 130 HP @ 1,900 RPM
    • Torque: Approximately 493 lb-ft @ 1,400 RPM
    • Displacement: 5.9 liters
    • Cylinders: 6
  • Dimensions
    • Overall Length (without attachment): 312 inches
    • Overall Width: 100 inches
    • Overall Height (to top of the cabin): 120 inches
    • Ground Clearance: 16 inches
    • Track Width: 79 inches
    • Wheelbase: 102 inches
  • Capacities
    • Fuel Tank: 90 gallons
    • Engine Oil: 8 gallons
    • Hydraulic Fluid: 54 gallons
  • Performance
    • Operating Weight: 42,300 lbs
    • Maximum Travel Speed: 20 mph
    • Drawbar Pull: 40,000 lbs
  • System
    • Hydraulic System Pressure: 5,512 psi
    • Pumps: Variable displacement axial piston pump
  • Tires
    • Front Tires: 23.6 x 29 inches
    • Rear Tires: 23.6 x 29 inches
  • Brakes
    • Service Brakes: Wet disc
    • Parking Brakes: Spring-applied, hydraulically released
  • Cabin
    • ROPS/FOPS certified
    • Air Conditioning
    • Adjustable Suspension Seat
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $3226/mo
1999 JCB JS260 LC
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
16552
MAKE:
JCB
MODEL:
JS260 LC
PRICE
$49,900 USD
  • Engine
    • Model: JCB Dieselmax Stage 3 / Tier 3
    • Power: 188 hp (140 kW)
    • Displacement: 408 cubic inches
  • Operating Specifications
    • Operating Weight: 57,320 lbs
    • Fuel Capacity: 125 gallons
    • Hydraulic System Capacity: 84 gallons
  • Performance
    • Maximum Digging Depth: 24 feet
    • Maximum Reach at Ground Level: 37 feet
    • Bucket Capacity: 0.84 - 2.13 cubic yards (varies)
    • Swing Speed: 10 rpm
  • Dimensions
    • Total Length: 36 feet
    • Width: 10 feet
    • Height: 10.3 feet
  • Tracks
    • Track Width: 31.5 inches
    • Ground Pressure: 5.55 psi
  • Cab
    • ROPS/FOPS cab as standard
    • Air conditioning available
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $1074/mo
2018 Kubota KX057-4
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
11
MAKE:
Kubota
MODEL:
KX057-4
PRICE
$64,500 USD
  • Engine
    • Engine model: V2607-CR-E4
    • Type: Water-cooled, 4-cycle diesel
    • Engine power: 47.6 HP at 2,200 RPM
    • Displacement: 159 cu in
    • Cylinders: 4
  • Dimensions
    • Overall length: 18 ft
    • Overall height: 8 ft 4 in
    • Overall width: 6 ft 5 in
    • Ground clearance: 1 ft
    • Track width: 14 in
  • Operational Capacity
    • Operating weight: 12,200 lbs
    • Buck capacity: 0.17 - 0.26 cu yd
  • Performance
    • Travel speed: 1.6 - 3.1 mph
    • Digging depth: 12 ft 9 in
    • Dumping height: 13 ft 5 in
    • Bucket digging force: 11,177 lbs
    • Arm digging force: 8,883 lbs
  • Hydraulic System
    • Hydraulic flow rate: 17.2 GPM
    • Auxiliary hydraulic flow rate: 17.2 GPM
    • Hydraulic pressure: 3,991 psi
  • Fuel Capacity
    • Fuel tank capacity: 19.8 gallons
  • Other Specifications
    • Tail swing radius: 4 ft 11 in
    • Swing speed: 9.5 RPM
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $1388/mo
2015 Komatsu PC210 LC-10
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
13919
MAKE:
Komatsu
MODEL:
PC210 LC-10
PRICE
$117,900 USD
  • General Specifications
    • Model Number: PC210 LC-10
    • Manufacturer: Komatsu
    • Subtype: Earth Moving and Construction
  • Engine
    • Model: Komatsu SAA6D107E-2
    • Type: Water-cooled, 4-cycle, direct injection, turbocharged, air-to-air aftercooled
    • Number of Cylinders: 6
    • Horsepower: Approximately 158 hp
    • Displacement: Approximately 408 cubic inches
  • Dimensions
    • Overall Length: Approximately 31 feet
    • Overall Width: Approximately 9 feet
    • Overall Height: Approximately 10 feet
    • Ground Clearance: Approximately 1.5 feet
    • Swing Radius: Approximately 10 feet
  • Weight
    • Operating Weight: Approximately 51,397 lbs
  • Performance
    • Max Digging Depth: Approximately 21 feet
    • Max Dumping Height: Approximately 22 feet
    • Max Travel Speed: Approximately 3.7 mph
    • Bucket Capacity: Approximately 1.54 - 2.09 cubic yards
  • Hydraulic System
    • Main Pumps: Variable displacement piston pumps
    • Pump Flow Capacity: Approximately 129 gallons per minute
    • Relief Valve Setting: Approximately 5,870 psi
  • Undercarriage
    • Shoe Size: Approximately 2.6 feet
    • Number of Track Rollers: 9 per side
    • Track Length: Approximately 14 feet
  • Fuel & Fluid Capacities
    • Fuel Tank: Approximately 105 gallons
    • Engine Oil: Approximately 6 gallons
    • Cooling System: Approximately 8 gallons
    • Hydraulic System: Approximately 43 gallons
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $2537/mo
2015 Komatsu PC210 LCi-10
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
14034
MAKE:
Komatsu
MODEL:
PC210 LCi-10
PRICE
$99,250 USD
  • Operating Weight
    • Approximately 52,000 lbs
  • Engine
    • Make and Model: Komatsu SAA6D107E-1
    • Net Horsepower: 148 hp
    • Displacement: 408 cu in
    • Number of Cylinders: 6
  • Performance
    • Maximum Digging Depth: 22 ft 10 in
    • Maximum Reach at Ground Level: 32 ft 8 in
    • Bucket Capacity: 0.76 to 2.13 cu yd
  • Dimensions
    • Overall Length: 31 ft 3 in
    • Overall Width: 10 ft 5 in
    • Overall Height: 10 ft 2 in
    • Ground Clearance: 1 ft 5 in
    • Track Length on Ground: 12 ft 6 in
    • Swing Radius: 9 ft 8 in
  • Hydraulic System
    • Pump Type: Variable Displacement Axial Piston
    • Maximum Flow: 150 gal/min
    • Relief Valve Setting: 4,970 psi
  • Fuel and Fluid Capacity
    • Fuel Tank Capacity: 113 gal
    • Engine Oil Capacity: 7.4 gal
    • Hydraulic System Capacity: 52.8 gal
    • Cooling System Capacity: 6.9 gal
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $2136/mo
2011 Bobcat E60
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
14072
MAKE:
Bobcat
MODEL:
E60
PRICE
$53,900 USD
  • General Specifications
    • Model: E60
    • Manufacturer: Bobcat
    • Subtype: Earth Moving and Construction
  • Engine
    • Engine Make: Bobcat
    • Model: D24
    • Horsepower: 62.5 hp
    • Displacement: 146 in³
    • Fuel Tank Capacity: 29 gallons
  • Performance
    • Operating Weight: 12,315 lbs
    • Travel Speed: 3.1 mph
    • Digging Force, Arm: 9,183 lbs
    • Digging Force, Bucket: 9,731 lbs
    • Tail Swing Overhang: 0.5 feet
  • Dimensions
    • Length: 242 inches
    • Width: 77 inches
    • Height: 100 inches
    • Ground Clearance: 14.6 inches
  • Hydraulic System
    • Auxiliary Hydraulic Flow: 20 gpm
    • System Pressure: 3,046 psi
  • Track
    • Track Width: 15 inches
    • Track Length on Ground: 100 inches
  • Capacity and Lifting
    • Auxiliary Hydraulics Standard Flow: 25 gpm
    • Lift Capacity at Maximum Reach: 2,100 lbs
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $1160/mo
2012 John Deere 180G LC
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
10408
MAKE:
John Deere
MODEL:
180G LC
PRICE
$129,500 USD
  • Engine
    • Manufacturer: John Deere
    • Model: PowerTech PSS 4045
    • Gross Power: 121 hp (90 kW)
    • Net Power: 117 hp (87 kW)
    • Displacement: 275 cu in (4.5 L)
  • Operating Dimensions
    • Operating Weight: 43,431 lbs (19,696 kg)
  • Performance
    • Maximum Ground Speed: 3.5 mph (5.6 km/h)
    • Drawbar Pull: 30,598 lbs (13,880 kg)
  • Hydraulic System
    • Main Pumps (Maximum) Flow: 59.2 gpm (224 L/min)
    • System Pressure: 4,495 psi (310 bar)
  • Dimensions
    • Transport Length: 31 ft 8 in (9.65 m)
    • Transport Height: 9 ft 10 in (3.00 m)
    • Overall Width: 10 ft 1 in (3.07 m)
  • Capacities
    • Fuel Tank Capacity: 91 gal (345 L)
    • Hydraulic Tank: 48 gal (181 L)
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $2787/mo
2016 Cat 323FL
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
14162
MAKE:
Cat
MODEL:
323FL
PRICE
$138,250 USD
  • Engine
    • Model: Cat C7.1
    • Gross Power: 168 HP (125 kW)
    • Displacement: 427.8 cubic inches
    • Emissions: U.S. EPA Tier 4 Final
  • Weights
    • Operating Weight: 50,265 lbs
  • Dimensions
    • Maximum Digging Depth: 21.7 ft
    • Maximum Reach: 32.2 ft
    • Overall Width: 9.5 ft
    • Height to Top of Cab: 10 ft
    • Tail Swing Radius: 9.3 ft
    • Track Length: 14.6 ft
  • Performance
    • Maximum Digging Force: 37,820 lbf
    • Hydraulic System Pressure: 5,076 psi
    • Hydraulic System Flow: 91.6 gal/min
  • Fuel Capacity
    • Fuel Tank: 99 gal
  • Hydraulic System
    • Main System - Maximum Flow: 2 x 46 gal/min
    • Maximum Pressure - Equipment: 4,970 psi
  • Undercarriage
    • Track Shoes Width: 31.5 in
    • Number of Carrier Rollers: 2 each side
    • Number of Track Rollers: 9 each side
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $2975/mo
2012 John Deere 250G LC
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
14200
MAKE:
John Deere
MODEL:
250G LC
PRICE
$78,450 USD
  • General Specifications
    • Manufacturer: John Deere
    • Model Number: 250G LC
    • Subtype: Earth Moving and Construction
    • Operating Weight: Approximately 56,400 lbs
    • Fuel Capacity: 160 gallons
    • Engine Type: John Deere PowerTech PVS 6068
  • Engine Specifications
    • Engine Output: 188 HP
    • Number of Cylinders: 6
    • Displacement: 414 cubic inches
    • Cylinder Bore: 4.19 inches
    • Piston Stroke: 5 inches
  • Hydraulics
    • Hydraulic Pump Flow Capacity: 125 gallons per minute
    • Main Pumps: 2 variable axial piston pumps
  • Dimensions
    • Transport Length: 32.4 feet
    • Transport Width: 10.4 feet
    • Height: 11.1 feet
    • Tail Swing Radius: 9.3 feet
    • Ground Clearance: 1.5 feet
  • Performance
    • Max Digging Depth: 24.8 feet
    • Arm Length: 10.8 feet
    • Bucket Breakout Force: 42,556 lbs
    • Max Reach at Ground Level: 36.7 feet
  • Undercarriage
    • Track Length: 14.4 feet
    • Shoe Size: 23.6 inches
    • Track Gauge: 8.5 feet
  • Capacities
    • Engine Oil Capacity: 6.1 gallons
    • Cooling System Fluid Capacity: 6.6 gallons
    • Hydraulic System Capacity: 68 gallons
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $1688/mo
1994 John Deere 790E LC
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
35848
MAKE:
John Deere
MODEL:
790E LC
PRICE
$27,750 USD
  • Engine
    • Manufacturer: John Deere
    • Model: 6068T
    • Net Power: 131 hp
    • Displacement: 414 cubic inches
    • Number of Cylinders: 6
  • Performance
    • Operating Weight: 48,720 lbs
    • Max Reach: 32.5 ft
    • Max Digging Depth: 24.2 ft
    • Bucket Capacity: 1.5 cubic yards
    • Drawbar Pull: 33,000 lbs
  • Hydraulic System
    • Pump Type: Variable-displacement piston pump
    • Main Relief Pressure: 4,975 psi
    • Pump Flow Capacity: 60 gallons per minute
  • Undercarriage
    • Track Shoe Width: 31.5 inches
    • Ground Pressure: 6.36 psi
  • Dimensions
    • Total Length: 32.2 ft
    • Total Width: 10.4 ft
    • Total Height: 10.8 ft
  • Capacities
    • Fuel Tank Capacity: 150 gallons
    • Hydraulic System Capacity: 55.5 gallons
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $609/mo
2015 Cat 311FLRR
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
20379
MAKE:
Cat
MODEL:
311FLRR
PRICE
$72,750 USD
  • Model: 311FLRR
  • Manufacturer: Cat
  • Engine
    • Engine Model: Cat C4.4 ACERT
    • Net Power: 74 HP
    • Gross Power: 80 HP
  • Weights
    • Operating Weight: 25,354 lbs
  • Dimensions
    • Overall Length: 25 ft 9 in
    • Overall Width: 8 ft 6 in
    • Height to Top of Cab: 9 ft 3 in
    • Tail Swing Radius: 6 ft 10 in
  • Performance
    • Maximum Forward Reach: 28 ft 3 in
    • Maximum Digging Depth: 19 ft 9 in
    • Boom Type: One-Piece
  • Hydraulic System
    • Main System Flow (Standard): 44.9 gal/min
    • Max Pressure - Equipment: 4,424 psi
  • Fuel
    • Fuel Tank Capacity: 71.6 gal
  • Swing Mechanism
    • Swing Speed: 11.5 RPM
  • Travel Speed
    • Maximum Travel Speed: 3.2 mph
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $1565/mo
2021 Cat 320GC
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
20391
MAKE:
Cat
MODEL:
320GC
PRICE
$214,900 USD
  • Engine
    • Model: Cat C4.4
    • Net Power: 162 HP
    • Gross Power: 169 HP
    • Bore: 4.1 inches
    • Stroke: 5.0 inches
    • Displacement: 269 cubic inches
  • Operating Specifications
    • Operating Weight: 48,281 lbs
    • Fuel Tank Capacity: 86 gallons
    • Hydraulic Tank Capacity: 47 gallons
  • Hydraulic System
    • Main System - Maximum Flow: 61 gallons per minute
    • Maximum Pressure - Equipment: 5076 psi
    • Maximum Pressure - Travel: 5076 psi
    • Maximum Pressure - Swing: 4061 psi
  • Performance
    • Swing Speed: 11.5 RPM
    • Maximum Travel Speed: 3.4 mph
    • Drawbar Pull: 47,000 lbs
  • Dimensions
    • Transport Width: 9.8 ft
    • Transport Length: 31.8 ft
    • Height to Top of Cab: 9.8 ft
    • Ground Clearance: 1.5 ft
    • Tail Swing Radius: 9.2 ft
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $4624/mo
2021 Kubota KX057-5
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
115
MAKE:
Kubota
MODEL:
KX057-5
PRICE
$67,450 USD
  • Engine
    • Model: Kubota V2607-CR-TE5
    • Type: Diesel, liquid-cooled, 4-cylinder
    • Displacement: 160.4 cu in
    • Gross Power: 47.6 hp
    • Net Power: 45.0 hp
    • Rated RPM: 2,200 rpm
  • Dimensions
    • Overall Length: 18.5 ft
    • Overall Width: 6.5 ft
    • Overall Height: 8.5 ft
    • Ground Clearance: 1.1 ft
    • Track Width: 15.7 in
    • Tail Swing Radius: 3.3 ft
  • Weight
    • Operating Weight: 12,345 lbs
  • Performance
    • Travel Speed: 1.8 mph (low), 3.0 mph (high)
    • Maximum Digging Depth: 12.7 ft
    • Maximum Dumping Height: 13.5 ft
    • Bucket Digging Force: 11,177 lbf
    • Arm Digging Force: 4,810 lbf
    • Maximum Reach at Ground Level: 20.5 ft
  • Capacities
    • Fuel Tank Capacity: 24.3 gal
    • Hydraulic Oil Reservoir: 21.1 gal
  • Hydraulic System
    • Pump Capacity: 46.3 gpm
    • Main Relief Pressure: 3,698 psi
  • Operating Features
    • Auxiliary Hydraulic Flow: 19.2 gpm
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $1451/mo
2015 Kobelco SK210 LC ACERA MARK 9
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
35879
MAKE:
Kobelco
MODEL:
SK210 LC ACERA MARK 9
PRICE
$119,900 USD
  • Engine
    • Model: HINO J05E
    • Type: Turbocharged, air-cooled, diesel engine
    • Power: 160 hp at 2,000 rpm
    • Displacement: 5.1 liters
  • Operating Weight
    • Approximately 48,500 lbs
  • Dimensions
    • Overall Length: 31.2 ft
    • Overall Width: 10.3 ft
    • Overall Height: 10.4 ft
    • Ground Clearance: 1.5 ft
  • Performance
    • Bucket Capacity: 0.76 to 1.57 cubic yards
    • Maximum Digging Depth: 20.4 ft
    • Travel Speed: 1.8 to 3.4 mph
    • Swing Speed: 11 rpm
  • Hydraulic System
    • Main Pumps: 2 variable displacement axial piston pumps
    • Maximum Flow: 2x63.7 gallons/min
    • System Pressure: 4,980 psi
  • Undercarriage
    • Shoe Width: 2.5 ft
    • Tumbler Distance: 12.9 ft
  • Fuel and Fluids
    • Fuel Tank Capacity: 88.8 gallons
    • Engine Oil: 5.2 gallons
    • Radiator: 7.2 gallons
  • Cab
    • Certified ROPS/FOPS
    • Air Conditioning
    • Adjustable Seat and Armrests
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $2580/mo
2020 Hitachi ZX210 LC-6N
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
14395
MAKE:
Hitachi
MODEL:
ZX210 LC-6N
PRICE
$139,900 USD
  • General Specifications
    • Manufacturer: Hitachi
    • Model Number: ZX210 LC-6N
    • Subtype: Earth Moving and Construction
  • Engine
    • Engine Make: Isuzu
    • Engine Model: 4HK1
    • Net Power: 160 hp
    • Displacement: 5.2 L (317 cubic inches)
  • Dimensions
    • Length: 31.9 ft
    • Width: 9.8 ft
    • Height: 9.8 ft
    • Track Length: 14 ft
    • Tail Swing Radius: 9.2 ft
  • Weight
    • Operating Weight: 47,839 lbs
  • Performance
    • Max Digging Depth: 21.5 ft
    • Max Reach: 32.5 ft
    • Max Dumping Height: 23 ft
    • Bucket Capacity: 0.55 - 1.85 cubic yards
    • Travel Speed: 3.3 mph
  • Hydraulic System
    • Pump Type: Variable Displacement Axial Piston
    • Main Pumps: Two
    • Max Flow Rate: 111.7 gallons per minute
    • Relief Valve Setting: 4,780 psi
  • Capacities
    • Fuel Tank: 88 gallons
    • Hydraulic System: 57 gallons
    • Engine Oil: 5 gallons
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $3010/mo
2006 Cat 325DL
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
14450
MAKE:
Cat
MODEL:
325DL
PRICE
$58,900 USD
  • Engine:
    • Net Power: 190 HP
    • Model: Cat C7.1 ACERT
    • Displacement: 439 cubic inches
  • Weights:
    • Operating Weight: 59,500 lbs
  • Dimensions:
    • Maximum Digging Depth: 22.1 ft
    • Maximum Reach at Ground Level: 32.9 ft
    • Width: 11.2 ft
    • Height: 10.5 ft
    • Length: 33.8 ft
  • Hydraulic System:
    • Main System - Maximum Flow: 213 gal/min
    • Maximum Pressure - Equipment: 5,076 psi
  • Performance:
    • Maximum Drawbar Pull: 47,310 lbs
    • Gradeability: 35 degrees
    • Bucket Forces (ISO): 35,970 lbs
  • Capacities:
    • Fuel Tank: 137 gal
    • Hydraulic Tank: 36 gal
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $1267/mo
2013 John Deere 350G LC
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
14506
MAKE:
John Deere
MODEL:
350G LC
PRICE
$89,000 USD
  • General Specifications
    • Operating Weight: Approximately 80,000 lbs
    • Fuel Capacity: 172 gallons
    • Hydraulic System Pressure: 5,511 psi
    • Hydraulic Pump Flow: 112 gallons per minute
  • Engine
    • Engine Make: John Deere
    • Net Power: 271 HP
    • Displacement: 548 cubic inches
  • Dimensions
    • Transport Length: 37 ft
    • Transport Width: 11 ft 4 in
    • Transport Height: 11 ft 4 in
    • Ground Clearance: 1 ft 6 in
  • Performance
    • Max Travel Speed: 3.5 mph
    • Drawbar Pull: 58,349 lbs
    • Arm Digging Force: 37,552 lbs
    • Bucket Digging Force: 52,377 lbs
  • Undercarriage
    • Shoe Size: 31.5 inches
    • Track Length: 15 ft 2 in
    • Number of Shoes per Side: 50
    • Number of Track Rollers per Side: 9
  • Attachments
    • Bucket Capacity: 1.9 - 2.7 cubic yards
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $1915/mo
1998 Komatsu PC400 LC-6LC
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
35896
MAKE:
Komatsu
MODEL:
PC400 LC-6LC
PRICE
$26,500 USD
  • General Information
    • Model Number: PC400 LC-6LC
    • Manufacturer: Komatsu
    • Subtype: Earth Moving and Construction
  • Engine
    • Make: Komatsu
    • Model: SA6D125E-5
    • Type: Water-cooled, 4-cycle diesel
    • Power Output: 311 hp
    • Total Displacement: 672 cubic inches
  • Dimensions
    • Overall Length: 39.8 ft
    • Width: 11.2 ft
    • Overall Height: 12.5 ft
    • Track Length: 15.6 ft
    • Ground Clearance: 1.5 ft
    • Operating Weight: 95,000 lbs
  • Performance
    • Maximum Travel Speed: 3.4 mph
    • Bucket Capacity: 2.09 cubic yards
    • Max Digging Depth: 26.9 ft
    • Max Vertical Wall Depth: 22.1 ft
  • Fuel Capacity
    • Fuel Tank Capacity: 209 gallons
  • Hydraulic System
    • Pump Type: Variable displacement piston pumps
    • Max Pump Flow: 184 GPM
    • Main Relief Pressure: 5,180 psi
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $582/mo
2014 Kobelco SK210 ACERA MARK 9
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
14549
MAKE:
Kobelco
MODEL:
SK210 ACERA MARK 9
PRICE
$79,900 USD
  • Engine
    • Model: HINO J05E
    • Type: Diesel, Water-cooled, 4-stroke
    • Displacement: Approximately 317 cubic inches
    • Horsepower: 160 HP
    • Number of Cylinders: 4
  • Dimensions
    • Overall Length: Approximately 31 feet
    • Overall Width: Around 10 feet
    • Overall Height: Around 10 feet
    • Ground Clearance: Approximately 1.3 feet
    • Tail Swing Radius: Approximately 9 feet
  • Operating Weight
    • Weight: Approximately 46,297 lbs
  • Performance
    • Bucket Capacity: 0.92 - 1.89 cubic yards
    • Arm Crowd Force: Approximately 26,134 lbf
    • Drawing Pull: Approximately 26,812 lbf
    • Speed: Maximum travel speed around 3.6 mph
    • Gradeability: 70%
  • Hydraulic System
    • Pump Type: Variable Displacement Pump
    • Main Pump Flow: Approximately 2 x 55.8 gallons per minute
    • Pressure Setting: Approximately 4,554 psi
  • Fuel and Fluids
    • Fuel Tank Capacity: Approximately 79 gallons
    • Hydraulic Oil Capacity: Approximately 38 gallons
  • Undercarriage
    • Shoe Width: Approximately 23.6 inches
    • No. of Shoes: 49 each side
    • No. of Rollers: Lower rollers 8 each side, upper rollers 2 each side
  • Cab
    • ROPS/FOPS: Included
    • Air Conditioning: Optional
    • Seat Type: Suspension seat
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $1719/mo
2022 Hitachi ZX85USB-5N
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
14569
MAKE:
Hitachi
MODEL:
ZX85USB-5N
PRICE
$92,900 USD
  • Engine
    • Model: Yanmar 4TNV98CT
    • Type: Water-cooled, 4-cycle, direct injection
    • Number of cylinders: 4
    • Engine output: Approximately 54.5 hp
    • Fuel type: Diesel
  • Dimensions
    • Operating weight: Approximately 18,821 lbs
    • Track width: Approximately 102 inches
    • Ground clearance: Approximately 13 inches
    • Overall width: Approximately 87 inches
    • Overall height: Approximately 110 inches
  • Performance
    • Bucket capacity: Approximately 0.26 - 0.38 cubic yards
    • Max digging depth: Approximately 14 feet
    • Max digging reach: Approximately 23 feet
    • Max travel speed: Approximately 3.1 mph
    • Swing speed: About 9.3 rpm
  • Hydraulic System
    • Pump type: Variable axial piston pump
    • Total flow rate: Approximately 32 gallons per minute
    • Relief valve setting: Approximately 3,770 psi
  • Undercarriage
    • Width: Adjustable
    • Shoe width: Approximately 18 inches
    • Travel motor: Axial piston motor with parking brake
  • Operator Cab
    • Seat: Fully adjustable suspension seat
    • Controls: Ergonomic design with easy access layout
    • Visibility: Wide window view for optimal visibility
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $1999/mo
2013 Cat 320ELRR
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
2218
MAKE:
Cat
MODEL:
320ELRR
PRICE
$169,900 USD
  • General Information
    • Model Number: 320ELRR
    • Manufacturer: Caterpillar (Cat)
    • Type: Hydraulic Excavator
  • Engine
    • Engine Model: Cat C6.6 ACERT
    • Net Power: 153 hp
    • Gross Power: 161 hp
  • Operating Specifications
    • Operating Weight: approximately 50,706 lbs
    • Fuel Tank Capacity: 100 gallons
    • Hydraulic System Fluid Capacity: 57 gallons
    • Engine Oil Capacity: 6 gallons
    • Cooling System Fluid Capacity: 8 gallons
  • Hydraulic System
    • Main System - Maximum Flow: 558 Liters/min or about 147.3 gallons/min
    • Maximum Pressure - Implements: 5076 psi
    • Maximum Pressure - Travel: 5076 psi
    • Maximum Pressure - Swing: 4134 psi
  • Performance
    • Digging Depth: up to 21.9 ft
    • Reach at Ground Level: up to 32.1 ft
    • Bucket Digging Force: 33,330 lbs
    • Stick Digging Force: 23,880 lbs
    • Maximum Travel Speed: 3.5 mph
  • Dimensions
    • Track Length: 14.9 ft
    • Track Gauge: 7.8 ft
    • Ground Clearance: 1.5 ft
    • Tail Swing Radius: 9.2 ft
    • Overall Shipping Length: 31 ft
  • Undercarriage
    • Shoe Width: 32 inches
    • Number of Shoes (each side): 47
    • Number of Track Rollers (each side): 8
    • Number of Carrier Rollers (each side): 2
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $3656/mo
2013 John Deere 350G LC
4M Iron
 
Used
DETAILS
SPECS
CONTACT
STK#:
20476
MAKE:
John Deere
MODEL:
350G LC
PRICE
CALL FOR PRICE
  • General Specifications
    • Operating Weight: Approximately 80,000 lbs
    • Fuel Capacity: 172 gallons
    • Hydraulic System Pressure: 5,511 psi
    • Hydraulic Pump Flow: 112 gallons per minute
  • Engine
    • Engine Make: John Deere
    • Net Power: 271 HP
    • Displacement: 548 cubic inches
  • Dimensions
    • Transport Length: 37 ft
    • Transport Width: 11 ft 4 in
    • Transport Height: 11 ft 4 in
    • Ground Clearance: 1 ft 6 in
  • Performance
    • Max Travel Speed: 3.5 mph
    • Drawbar Pull: 58,349 lbs
    • Arm Digging Force: 37,552 lbs
    • Bucket Digging Force: 52,377 lbs
  • Undercarriage
    • Shoe Size: 31.5 inches
    • Track Length: 15 ft 2 in
    • Number of Shoes per Side: 50
    • Number of Track Rollers per Side: 9
  • Attachments
    • Bucket Capacity: 1.9 - 2.7 cubic yards
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477
Get Quote
Get Flyer
2018 Case CX350D
4M Iron
 
Used
DETAILS
SPECS
CONTACT
STK#:
16646
MAKE:
Case
MODEL:
CX350D
PRICE
CALL FOR PRICE
  • Engine
    • Model: Isuzu 6HK1
    • Net Power: 268 hp
    • Gross Power: 280 hp
    • Displacement: 641 cubic inches
  • Operation Weight
    • Operating Weight: 82,500 lbs
  • Capacity
    • Fuel Tank: 172 gallons
    • Hydraulic System Capacity: 84 gallons
    • Def Tank: 8.7 gallons
  • Dimensions
    • Overall Length: 37 feet
    • Overall Width: 11 feet
    • Overall Height: 12 feet
  • Performance
    • Bucket Capacity: 2.09 cubic yards
    • Maximum Digging Depth: 26.9 feet
    • Travel Speed: 3.7 mph
  • Hydraulic System
    • Pump Flow: 2x 63.4 gallons per minute
    • Relief Valve Pressure: 4,970 psi
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477
Get Quote
Get Flyer
2014 Komatsu PC290 LC-10
4M Iron
 
Used
DETAILS
SPECS
CONTACT
STK#:
16647
MAKE:
Komatsu
MODEL:
PC290 LC-10
PRICE
CALL FOR PRICE
  • Engine
    • Model: Komatsu SAA6D107E-2
    • Type: Water-cooled, 4-cycle, 6-cylinder, Turbodiesel
    • Gross Horsepower: 196 HP
    • Net Horsepower: 190 HP
    • Displacement: 408 cu in
    • Bore x Stroke: 4.21 in x 4.55 in
    • Maximum Torque: 487 lb-ft @ 1500 RPM
  • Operational
    • Operating Weight: 65,271 lbs
    • Fuel Capacity: 81.9 gal
    • Hydraulic System Fluid Capacity: 29.7 gal
    • Engine Oil Capacity: 7.9 gal
    • Coolant Capacity: 7.7 gal
  • Performance
    • Travel Speed - High: 3.7 mph
    • Travel Speed - Low: 2.2 mph
    • Max Digging Depth: 22 ft 0 in
    • Max Dumping Height: 22 ft 9 in
    • Swing Speed: 11 RPM
    • Bucket Capacity: 0.76 - 2.19 cubic yards
  • Hydraulic System
    • Main Pumps: 2 Variable Displacement Piston Pumps
    • Pump Flow Capacity: 79.2 gal/min
    • Relief Valve Setting: 5,040 psi
  • Dimensions
    • Overall Length: 31 ft 11 in
    • Overall Width: 10 ft 5 in
    • Overall Height (to top of cab): 10 ft 0 in
    • Track Length: 14 ft 2 in
    • Ground Clearance: 1 ft 6 in
    • Tail Swing Radius: 10 ft 1 in
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477
Get Quote
Get Flyer
2007 Komatsu PC400 LC-7E0
4M Iron
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
14589
MAKE:
Komatsu
MODEL:
PC400 LC-7E0
PRICE
$29,200 USD
  • Engine
    • Model: Komatsu SAA6D125E-5
    • Type: Water-cooled, 4-cycle, 6-cylinder, turbocharged
    • Fuel: Diesel
    • Displacement: Approximately 763 cubic inches
    • Horsepower: 271 HP @ 1,900 rpm
    • Emission Rating: EPA Tier 3
  • Operating Weight
    • Weight: Approximately 92,800 lbs
  • Performance
    • Bucket Capacity: 2.1 to 4.17 cubic yards
    • Ground Pressure: 7.4 psi
    • Max Digging Depth: Approximately 24 feet
    • Max Dumping Height: Approximately 23.3 feet
    • Max Reach at Ground Level: Approximately 35.4 feet
  • Hydraulic System
    • Pump Type: Variable displacement piston pumps
    • Main Pump Flow: 158.5 gallons per minute
    • Relief Valve Setting: 4,970 psi
  • Fuel Efficiency
    • Fuel Tank Capacity: 172 gallons
  • Dimensions
    • Overall Length: Approximately 38 feet
    • Overall Width: Approximately 11 feet
    • Overall Height: Approximately 12 feet
    • Ground Clearance: Approximately 1.5 feet
  • Undercarriage
    • Shoe Size: Approximately 2 feet
    • Track Length: Approximately 14 feet
  • Cab
    • Type: Enclosed cab with air conditioning
    • Features: Adjustable seat, ergonomic controls, sound suppression
  • Other Features
    • Komatsu's Advanced Hydraulic System
    • Electronic Monitoring System (EMMS)
    • Backup alarm
4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $640/mo

Your location is Columbus, OH. Modify

Equipment Finder Equipment
finder
Change Search Filters