Hitachi zw1406 Equipment For Sale

2022 Heli 25C-M1H

Big Joe Handling Systems

Used

PRICE: $33,995 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 335164
MAKE:: Heli
MODEL:: 25C-M1H
MAST TYPE:: Three Stage
MAST - LOWERED:: 83 in
MAST - RAISED:: 185 in
FUEL:: LP Gas
HOURS:: 5363 Hrs
SIDESHIFTER:: YES
CAPACITY:: 5000 lbs
Location:: California

General Information
- Model Number: 25C-M1H
- Manufacturer: Heli
- Type: Forklift
- Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
- Fuel Type: LP Gas
Dimensions
- Overall Length: Approximately 147 inches
- Overall Width: Approximately 42 inches
- Height to Top of Overhead Guard: Approximately 87 inches
- Wheelbase: Approximately 66 inches
- Turning Radius: Approximately 89 inches
Performance
- Load Capacity: 5,000 lbs
- Drive Speed: Approximately 11 mph
Engine
- Fuel Type: LP Gas
- Engine Model: Specific model may vary
- Power Output: Approximately 60 HP
Tires
- Tire Type: Cushion
Hydraulics
- Hydraulic System: Open Center
- Hydraulic Pressure: Approximately 2,500 psi
Forks
- Fork Length: Varies
- Fork Width: Approximately 4 inches
Brakes
- Service Brake: Hydraulic
- Parking Brake: Mechanical Lever
Additional Features
- Operator Seat: Adjustable with Suspension
- Steering: Power Steering
- Instrumentation: Multi-Functional Display
- Safety Features: Seat Belt, Overhead Guard

Big Joe Handling Systems
Sales Dept: 510-617-1990
25932 Eden Landing Rd
Hayward, CA 94545

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

Big Joe Handling Systems
25932 Eden Landing Rd

Hayward, CA 94545

510-617-1990

2017 Skytrak 10054

United Lift LLC

Used

PRICE: $119,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: BF91042359-NLE
MAKE:: Skytrak
MODEL:: 10054
CAPACITY:: 10000 lbs
LIFT HEIGHT:: 54'
FUEL:: Diesel
HOURS:: 2436 Hrs
Location:: New York

General Information
- Model: 10054
- Manufacturer: Skytrak
- Type: Telehandler
Dimensions
- Overall Length (without forks): 246 inches
- Overall Width: 96 inches
- Height to Top of Cab: 101 inches
- Wheelbase: 120 inches
- Ground Clearance: 17 inches
Weight
- Operating Weight: 30,000 lbs
Engine
- Engine Make: Cummins
- Engine Model: QSF3.8
- Power: 110 horsepower
- Fuel Type: Diesel
- Fuel Tank Capacity: 40 gallons
Transmission
- Transmission Type: Powershift
- Number of Speeds: 3 forward, 3 reverse
Performance
- Maximum Lift Capacity: 10,000 lbs
- Forward Reach: 42 ft
- Travel Speed: 22 mph
- Turning Radius (over tires): 13 ft
Tires
- Tire Size: 14.00 x 24 inch
Hydraulic System
- Hydraulic System Pressure: 3,625 psi
- Hydraulic Tank Capacity: 30 gallons
Forks
- Fork Length: Varies
Brakes
- Service Brakes: Wet disc
- Parking Brakes: Spring-applied, hydraulically released

United Lift LLC
Arcangelo Capozzolo: 716-281-1351
300 International Dr. Suite 100
Williamsville, NY 14221

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

United Lift LLC
300 International Dr. Suite 100

Williamsville, NY 14221

716-281-1351

2018 Genie S65 Trax

United Lift LLC

Used

PRICE: $109,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: BF9998719-NLE
MAKE:: Genie
MODEL:: S65 Trax
LIFT HEIGHT:: 65'
FUEL:: Diesel
HOURS:: 2488 Hrs
Location:: New York

General Specifications
- Model Number: S65 TRAX
- Manufacturer: Genie
- Type: Boom Lift
- Subtype: Telescopic Boom
Dimensions
- Length: 38 ft 2 in
- Width: 8 ft 2 in
- Height: 10 ft 1 in
- Wheelbase: 8 ft 2 in
- Ground Clearance: 1 ft
Performance
- Horizontal Reach: 56 ft 2 in
- Lift Capacity: 500 lbs
- Gradeability: 45%
- Turning Radius (Outside): 17 ft 7 in
- Drive Speed: 3.8 mph
Power
- Engine: 74 hp
- Fuel Type: Diesel
- Fuel Capacity: 40 gal
Tracks
- Track Width: 17.7 in
- Track Length: Varies
- Track Material: Rubber
Weight
- Operating Weight: 27,500 lbs
Operational
- Platform Length: 3 ft
- Platform Width: 8 ft
- Platform Height: 65 ft
- Platform Rotation: 160 degrees

United Lift LLC
Arcangelo Capozzolo: 716-281-1351
300 International Dr. Suite 100
Williamsville, NY 14221

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

United Lift LLC
300 International Dr. Suite 100

Williamsville, NY 14221

716-281-1351

1994 Hitachi EX220 LC-2

4M Iron

Used

PRICE: $32,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 35952
MAKE:: Hitachi
MODEL:: EX220 LC-2
Location:: South Carolina

Engine Specifications
- Engine Model: Isuzu AA-6BG1T
- Engine Type: 6-cylinder, water-cooled, turbocharged diesel
- Power Output: Approximately 158 HP (horsepower)
- Displacement: 389.7 cubic inches
- Maximum Torque: 398 lb-ft @ 1,600 RPM
Operating Weight
- Approximately 46,297 pounds
Dimensions
- Overall Length: 31.3 feet
- Width: 9.6 feet
- Height to Top of Cab: 10.3 feet
- Track Length: 14.1 feet
- Track Width: Approximately 2.6 feet
- Ground Clearance: 1.5 feet
Performance
- Maximum Digging Depth: 21.3 feet
- Bucket Capacity: 0.85 to 1.1 cubic yards
- Travel Speed: 3.4 mph
- Swing Speed: 13.3 RPM
Hydraulic System
- Main Pumps: 2 variable displacement axial piston pumps
- Hydraulic Flow: 61.8 gallons per minute
- Pressure Setting: 4,970 psi
Capacities
- Fuel Tank: 106 gallons
- Hydraulic Oil Tank: 38 gallons
Tracks
- Track Shoe Width: 23.6 inches
- Number of Shoes Per Side: 49
- Shoes Type: Triple grouser

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2015 Hitachi ZX85USB-5A

4M Iron

Used

PRICE: $56,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 16705
MAKE:: Hitachi
MODEL:: ZX85USB-5A
Location:: South Carolina

General Specifications
- Model Number: ZX85USB-5A
- Manufacturer: Hitachi
- Subtype: Earth Moving and Construction Equipment
Dimensions
- Operating Weight: Approximately 18,100 lbs
- Overall Length: Approximately 20 ft
- Overall Width: Approximately 8 ft
- Overall Height: Approximately 9 ft
Engine
- Model: Isuzu 4JJ1X
- Type: Water-cooled, 4-cycle diesel
- Output: 55.4 hp
- Displacement: 178.9 cu in
- Fuel Tank Capacity: 28 gallons
Performance
- Digging Depth: Up to 14 ft
- Arm Digging Force: Up to 7,800 lbs
- Bucket Digging Force: Up to 12,300 lbs
- Travel Speed: Up to 3.1 mph
Hydraulic System
- Pump Type: Variable displacement axial piston
- Main Pumps Maximum Flow: 42.3 gallons per minute
- Relief Valve Setting: 4,360 psi
- Hydraulic Reservoir Capacity: 20 gallons
Undercarriage
- Shoes: Rubber/Crawler
- Total Number of Rollers: 5 per side
- Track Length: Approximately 10 ft
- Ground Pressure: 4.19 psi
Operational Specs
- Operator's Cab: ROPS/FOPS certified
- Air Conditioning: Available
- Noise Level Inside Cab: 73 dB(A)

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2022 Peterbilt 579

J&J Truck Sales, Inc.

Used

PRICE: $49,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: ND759294
MAKE:: Peterbilt
MODEL:: 579
Location:: Virginia

Model: Peterbilt 579
Category: Truck
Manufacturer: Peterbilt Motors Company

Engine & Drivetrain

Engine Type: PACCAR MX-13
Engine Displacement: 780 cubic inches (12.9 liters)
Horsepower: Range from 405 to 510 HP
Torque: Up to 1,850 lb-ft
Transmission: 10, 13, or 18-speed manual or automated
Fuel Type: Diesel

Dimensions & Weight

Overall Length: Approximately 244 inches (varies with configuration)
Wheelbase: Available from 200 to 280 inches
Gross Vehicle Weight Rating (GVWR): Up to 52,000 lbs
Front Axle Rating: 12,000 to 14,600 lbs
Rear Axle Rating: 20,000 to 46,000 lbs

Fuel Capacity

Fuel Tank Options: 100 to 200 gallons

Performance

Top Speed: Governed at 75 mph (approximate)
Fuel Efficiency: Up to 9 mpg (varies depending on load and driving conditions)

Cab & Interior Features

Cab Type: Available in Day Cab, Sleeper Cab configurations
Sleeper Size: 80-inch UltraLoft sleeper optional
Interior Trim Levels: Platinum and Prestige
Seats: Adjustable air-ride seats
Infotainment: Touchscreen with navigation, Bluetooth capability
Climate Control: Automatic climate control system

Safety & Technologies

Braking System: Anti-lock Braking System (ABS)
Stability Control: Electronic Stability Control (ESC)
Collision Mitigation: Advanced collision mitigation technologies
Lane Departure Warning System
Adaptive Cruise Control

J&J Truck Sales, Inc.
Forrest Dodson: 434-215-0641
11453 US Hwy. 29
Chatham, VA 24531

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2022 Peterbilt 579

J&J Truck Sales, Inc.

Used

PRICE: $49,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: ND759355
MAKE:: Peterbilt
MODEL:: 579
Location:: Virginia

Model: Peterbilt 579
Category: Truck
Manufacturer: Peterbilt Motors Company

Engine & Drivetrain

Engine Type: PACCAR MX-13
Engine Displacement: 780 cubic inches (12.9 liters)
Horsepower: Range from 405 to 510 HP
Torque: Up to 1,850 lb-ft
Transmission: 10, 13, or 18-speed manual or automated
Fuel Type: Diesel

Dimensions & Weight

Overall Length: Approximately 244 inches (varies with configuration)
Wheelbase: Available from 200 to 280 inches
Gross Vehicle Weight Rating (GVWR): Up to 52,000 lbs
Front Axle Rating: 12,000 to 14,600 lbs
Rear Axle Rating: 20,000 to 46,000 lbs

Fuel Capacity

Fuel Tank Options: 100 to 200 gallons

Performance

Top Speed: Governed at 75 mph (approximate)
Fuel Efficiency: Up to 9 mpg (varies depending on load and driving conditions)

Cab & Interior Features

Cab Type: Available in Day Cab, Sleeper Cab configurations
Sleeper Size: 80-inch UltraLoft sleeper optional
Interior Trim Levels: Platinum and Prestige
Seats: Adjustable air-ride seats
Infotainment: Touchscreen with navigation, Bluetooth capability
Climate Control: Automatic climate control system

Safety & Technologies

Braking System: Anti-lock Braking System (ABS)
Stability Control: Electronic Stability Control (ESC)
Collision Mitigation: Advanced collision mitigation technologies
Lane Departure Warning System
Adaptive Cruise Control

J&J Truck Sales, Inc.
Forrest Dodson: 434-215-0641
11453 US Hwy. 29
Chatham, VA 24531

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2022 Peterbilt 579

J&J Truck Sales, Inc.

Used

PRICE: $99,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: ND759284
MAKE:: Peterbilt
MODEL:: 579
Location:: Virginia

Model: Peterbilt 579
Category: Truck
Manufacturer: Peterbilt Motors Company

Engine & Drivetrain

Engine Type: PACCAR MX-13
Engine Displacement: 780 cubic inches (12.9 liters)
Horsepower: Range from 405 to 510 HP
Torque: Up to 1,850 lb-ft
Transmission: 10, 13, or 18-speed manual or automated
Fuel Type: Diesel

Dimensions & Weight

Overall Length: Approximately 244 inches (varies with configuration)
Wheelbase: Available from 200 to 280 inches
Gross Vehicle Weight Rating (GVWR): Up to 52,000 lbs
Front Axle Rating: 12,000 to 14,600 lbs
Rear Axle Rating: 20,000 to 46,000 lbs

Fuel Capacity

Fuel Tank Options: 100 to 200 gallons

Performance

Top Speed: Governed at 75 mph (approximate)
Fuel Efficiency: Up to 9 mpg (varies depending on load and driving conditions)

Cab & Interior Features

Cab Type: Available in Day Cab, Sleeper Cab configurations
Sleeper Size: 80-inch UltraLoft sleeper optional
Interior Trim Levels: Platinum and Prestige
Seats: Adjustable air-ride seats
Infotainment: Touchscreen with navigation, Bluetooth capability
Climate Control: Automatic climate control system

Safety & Technologies

Braking System: Anti-lock Braking System (ABS)
Stability Control: Electronic Stability Control (ESC)
Collision Mitigation: Advanced collision mitigation technologies
Lane Departure Warning System
Adaptive Cruise Control

J&J Truck Sales, Inc.
Forrest Dodson: 434-215-0641
11453 US Hwy. 29
Chatham, VA 24531

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2013 Hitachi ZX210 LC-5

4M Iron

Used

PRICE: $87,400 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 17840
MAKE:: Hitachi
MODEL:: ZX210 LC-5
Location:: South Carolina

General Information
- Manufacturer: Hitachi
- Model: ZX210 LC-5
- Subtype: Earth Moving and Construction
Engine Specifications
- Engine Model: Isuzu AJ-4HK1XYSA-01
- Net Power: 158 HP
- Displacement: 317 cubic inches
- Cylinders: 4
- Emission Rating: Tier 3
Operational Specs
- Operating Weight: 47,988 lbs
- Fuel Capacity: 81 gallons
- Hydraulic System Capacity: 45 gallons
Dimensions
- Overall Length: 32 feet
- Overall Width: 9.8 feet
- Overall Height: 9.9 feet
Performance
- Bucket Capacity: 0.74 to 1.57 cubic yards
- Max Digging Depth: 21 feet
- Max Ground Reach: 32 feet
Undercarriage
- Track Shoe Width: 31.5 inches
- Ground Clearance: 1.4 feet
Hydraulics
- Main Pump Flow: 2 x 74 gallons per minute
- Relief Valve Setting: 4,970 psi
Additional Features
- Cab features: Air conditioning, adjustable seating
- Extended maintenance intervals
- Advanced hydraulic technology for increased efficiency

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2015 Hitachi ZX160 LC-5

4M Iron

Used

PRICE: $72,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 36045
MAKE:: Hitachi
MODEL:: ZX160 LC-5
Location:: South Carolina

Engine
- Model: Isuzu 4JJ1
- Type: 4-cylinder, turbocharged diesel
- Power Output: Approximately 125 HP
- Displacement: Around 183 cubic inches
- Emissions Compliance: Tier 4 Interim/EU Stage IIIB
Operating Weight
- Range: Approximately 38,420 lbs
Dimensions
- Transport Length: Approximately 28 ft
- Transport Width: Approximately 8 ft 6 in
- Transport Height: Approximately 9 ft 4 in
Performance
- Maximum Digging Depth: Approximately 21 ft 3 in
- Maximum Reach at Ground Level: Approximately 30 ft
- Maximum Dumping Height: Approximately 24 ft
- Bucket Capacity: Ranges from 0.48 to 1.19 cubic yards
Hydraulics
- Pump Type: Variable displacement axial piston pumps
- Main Pump Flow: Approximately 34 gallons/min
- Hydraulic Pressure: Maximum of about 4,975 psi
Tracks
- Track Shoe Width: Approximately 23.6 in
- Ground Pressure: Approximately 6.4 psi
Capacities
- Fuel Tank Capacity: Approximately 81 gallons
- Hydraulic Tank Capacity: Approximately 43 gallons
- Engine Oil Capacity: Approximately 5.8 gallons
Cab
- ROPS/FOPS Certified
- Sound Level: Approximately 68 dB(A) inside cab
- Heating and Air Conditioning

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

1996 Hitachi EX200 LC-3

4M Iron

Used

PRICE: $49,150 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 18162
MAKE:: Hitachi
MODEL:: EX200 LC-3
Location:: South Carolina

General Information
- Model Number: EX200 LC-3
- Manufacturer: Hitachi
- Subtype: Earth Moving and Construction
Engine Specifications
- Engine Make: Isuzu
- Engine Model: 6BG1T
- Net Power: 132 hp
- Engine Type: Turbocharged, Water-cooled, Diesel
- Number of Cylinders: 6
- Displacement: 389 cubic inches
Dimensions
- Operating Weight: 43,050 lbs
- Overall Length: 31 ft
- Overall Width: 9 ft 10 in
- Overall Height: 9 ft 9 in
- Ground Clearance: 1 ft 5 in
- Track Length: 14 ft 5 in
- Tail Swing Radius: 9 ft 6 in
Operational Specifications
- Main Pump Flow: 56.2 gallons/minute
- Fuel Capacity: 109 gallons
- Hydraulic System Fluid Capacity: 42.3 gallons
Performance
- Max Digging Depth: 22 ft 2 in
- Max Reach at Ground Level: 32 ft 8 in
- Bucket Capacity: 0.8 - 1.5 cubic yards
- Travel Speed: 3.7 mph

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2015 Hitachi ZX300LC-6N

National Lift Equipment

Used

PRICE: $44,750 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 147573
MAKE:: Hitachi
MODEL:: ZX300LC-6N
Location:: Pennsylvania

Model Number: ZX300LC-6N
Manufacturer: Hitachi
Subtype: Earth Moving and Construction
Fuel Type Used: Diesel

Engine Specifications:
- Engine Model: Isuzu 6HK1X
- Engine Power: 197 HP (147 kW)
- Displacement: 368.4 in³ (6.0 L)
- Cylinders: 6
- Max Torque: 347 lb-ft (470 Nm)
Operational Specifications:
- Operating Weight: 66,140 lbs (30,000 kg)
- Overall Length: 33.1 ft (10.1 m)
- Overall Width: 10.8 ft (3.3 m)
- Overall Height: 10.3 ft (3.14 m)
- Track Length: 12.8 ft (3.9 m)
- Track Width: 2.6 ft (0.8 m)
- Fuel Tank Capacity: 49.6 gal (188 L)
- Hydraulic Tank Capacity: 20.6 gal (78 L)
- Max Digging Depth: Not specified
- Max Reach: Not specified
Hydraulic System:
- Pump Type: Variable displacement pump
- Maximum Flow Rate: 72.2 gal/min (273 L/min)
- Operating Pressure: 5,071 psi (350 bar)
Performance:
- Swing Speed: 10.5 rpm
- Gradeability: 70%
- Machine Stabilizers: Standard
- Bucket Capacity: Varies (bucket capacity varies)
Cab Features:
- Operator's Seat: Ergonomic high-back seat with adjustable suspension
- AC/Heat: Standard air conditioning and heating system
- Control System: Joystick controls for smooth operation
- Instrument Panel: Digital display with real-time analytics
- Sound Level: Low noise operation

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2017 Hamm H10i

National Lift Equipment

Used

PRICE: $62,900 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 147576
MAKE:: Hamm
MODEL:: H10i
Location:: Pennsylvania

NLEQ# 147576, 2220 Hours, Diesel, Single Drum

Model Number: H10I
Manufacturer: Hamm
Fuel Type: Diesel
Engine Specifications:
- Type: Diesel Engine
- Power Output: Approximately 100 HP
- Cylinders: 4-cylinder engine
- Cooling: Water-cooled
Dimensions:
- Overall Length: Approximately 158 inches
- Overall Width: Approximately 70 inches
- Overall Height: Approximately 96 inches
- Wheelbase: Approximately 87 inches
Weight:
- Operating Weight: Approximately 21,000 lbs
Capacity:
- Load Capacity: Approximately 22,000 lbs
Performance:
- Maximum Speed: Approximately 12 mph
- Turning Radius: Approximately 144 inches
Tires:
- Type: Pneumatic tires
- Front Tire Size: Approximately 12 x 18 inches
- Rear Tire Size: Approximately 12 x 18 inches
Hydraulic System:
- Hydraulic Capacity: Approximately 20 gallons

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

Finance at $/mo

2019 Toyota 8FDU25

Carolina-Georgia Services Company

Used

PRICE: $28,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: CGS25-1010c
MAKE:: Toyota
MODEL:: 8FDU25
MAST TYPE:: Three Stage
MAST - LOWERED:: 189 in
MAST - RAISED:: 83 in
FUEL:: Diesel
SIDESHIFTER:: YES
CAPACITY:: 5000 lbs
Location:: Georgia

General Information:
- Manufacturer: Toyota
- Model Number: 8FDU25
- Type: Forklift
- Power Source: Diesel
Dimensions:
- Overall Length (without forks): Approximately 8.8 ft
- Overall Width: Approximately 4.3 ft
- Overall Height: Approximately 7 ft
- Wheelbase: Approximately 6 ft
- Ground Clearance: Approximately 0.5 ft
- Turning Radius: Approximately 8 ft
Performance:
- Load Capacity: 5,000 lbs
- Travel Speed: Approximately 11 mph (loaded)
- Lifting Speed: Approximately 98 ft/min (loaded)
- Gradeability: 25% (loaded)
Powertrain:
- Engine Manufacturer: Toyota
- Engine Model: 1DZ-II
- Engine Power: Approximately 52 HP
- Number of Cylinders: 4
- Transmission: Automatic Powershift
Tires:
- Type: Pneumatic
- Front Tires: 7.00-12
- Rear Tires: 6.00-9
Brakes:
- Service Brake: Hydraulic
- Parking Brake: Hand operated
Hydraulic System:
- Hydraulic Pressure: Approximately 2,700 psi
- Hydraulic Tank Capacity: 14 gallons
Weight:
- Total Weight: Approximately 8,670 lbs
Other Features:
- Instrument Display: Multi-function LCD
- Standard Equipment: Operator Presence Sensing System (OPSS), LED lights

Carolina-Georgia Services Company
Larry Jenkins: 404-531-7680
4201 Elizabeth St NE
Covington, GA 30014-2850

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

Carolina-Georgia Services Company
4201 Elizabeth St NE

Covington, GA 30014-2850

404-531-7680

2019 Hyster S30FT

Supreme Forklift & Equipment

Used

PRICE: $12,995 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

WARRANTY

MAKE:: Hyster
MODEL:: S30FT
MAST TYPE:: Three Stage
MAST - LOWERED:: 78 in
MAST - RAISED:: 175 in
FUEL:: LP Gas
HOURS:: 7369 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Location:: Arizona

FINANCING AVAILABLE

General Specifications
- Manufacturer: Hyster
- Model Number: S30FT
- Type: Forklift
Dimensions
- Overall Length to Fork Face: 87 inches
- Overall Width: 41.5 inches
- Overall Height (cab): 83 inches
- Wheelbase: 55 inches
- Ground Clearance: 3.5 inches
Powertrain
- Engine Type: Internal Combustion - LPG
- Engine Model: PSI 2.4L
- Transmission Type: Powershift
- Drive Axle: Planetary Drive Axle
Performance
- Load Capacity: 3,000 lbs
- Top Speed: 11.2 mph (unloaded)
- Gradeability: 33% (at 1 mph)
Chassis
- Tire Type: Cushion
- Front Tire Size: 18 x 7 x 12.1 inches
- Rear Tire Size: 14 x 4.5 x 8.0 inches
- Service Brake: Hydraulic
- Parking Brake: Mechanical Lever Actuated
Hydraulic System
- Hydraulic Pressure: 2,700 psi
- Hydraulic Tank Capacity: 7 gallons
Forks
- Fork Length: Varies
- Fork Spread: 37.4 inches
- Fork Thickness: 1.6 inches
Operator Environment
- Steering: Hydrostatic Power Steering
- Seat Type: Vinyl Suspension Seat
- Noise Level: 80 dB(A) at operator's ear

Supreme Forklift & Equipment
Sales Dept.: 480-660-4508
25250 S Power Rd
Queen Creek, AZ 85142

30-Day Powertrain Warranty Included

Finance at $/mo

Supreme Forklift & Equipment
25250 S Power Rd

Queen Creek, AZ 85142

480-660-4508

2008 Komatsu G25ST-16

Supreme Forklift & Equipment

Used

PRICE: $9,995 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

WARRANTY

MAKE:: Komatsu
MODEL:: G25ST-16
MAST TYPE:: Three Stage
MAST - LOWERED:: 85 in
MAST - RAISED:: 188 in
FUEL:: LP Gas
HOURS:: 8265 Hrs
SIDESHIFTER:: YES
CAPACITY:: 5000 lbs
Location:: Arizona

FINANCING AVAILABLE

Model Number: G25ST-16
Manufacturer: Komatsu
Type: Forklift
Fuel Type Used: LP Gas

Engine Specifications
- Engine Model: Komatsu 4C
- Engine Type: 4-cylinder
- Displacement: Approximately 135 cubic inches
- Power Output: 49 horsepower

Performance
- Rated Capacity: 5,000 lbs
- Load Center: 24 inches
- Drive Speed: Approximately 11 mph unloaded

Dimensions
- Overall Length (without forks): 8.5 feet
- Overall Width: 3.6 feet
- Overall Height (top of overhead guard): 7 feet
- Wheelbase: 5.5 feet
- Ground Clearance: 5.5 inches

Weight
- Service Weight: Approximately 8,800 lbs

Wheels and Tires
- Front Tires: 7.00-12
- Rear Tires: 6.00-9
- Type: Pneumatic

Brakes
- Service Brake: Hydraulic
- Parking Brake: Mechanical

Steering
- Type: Hydrostatic Power Steering

Supreme Forklift & Equipment
Sales Dept.: 480-660-4508
25250 S Power Rd
Queen Creek, AZ 85142

30-Day Powertrain Warranty Included

Finance at $/mo

Supreme Forklift & Equipment
25250 S Power Rd

Queen Creek, AZ 85142

480-660-4508

2016 Hitachi ZX220W

National Lift Equipment

Used

PRICE: $99,875 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 148140
MAKE:: Hitachi
MODEL:: ZX220W
Location:: Pennsylvania

Model Number: ZX220W
Manufacturer: Hitachi
Subtype: Earth Moving and Construction
Engine:
- Type: Isuzu 4HK1
- Power: 147 hp (110 kW) @ 2,000 rpm
- Displacement: 4.8 L
- Fuel Type: Diesel
Dimensions:
- Overall Length: 23 ft 1 in
- Overall Width: 7 ft 11 in
- Overall Height: 9 ft 3 in
- Wheelbase: 11 ft 5 in
- Track Width: 6 ft 4 in
Performance:
- Operating Weight: 24,000 lbs (10,886 kg)
- Bucket Capacity: Varies (typically around 0.9 cu yd)
- Maximum Travel Speed: 22.4 mph (36 km/h)
- Gradeability: 30% (maximum uphill grade)
Hydraulic System:
- System Type: Closed Center
- Pump Flow Rate: 70.6 GPM (267 L/min)
- Operating Pressure: 4,000 psi (275 bar)
Transmission:
- Type: Automatic
- Gear Type: 2-speed
Cab Features:
- Air Conditioning: Standard
- Visibility: Large windows for improved sight lines
- Operator Seat: Adjustable with high back support
Chassis:
- Axle Configuration: 4x4
- Frame Type: Welded steel frame
Other Features:
- Tool Carrier: Yes
- Attachment Options: Wide variety available
- Service Interval: 500 hours

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2023 Komatsu D39E-24

National Lift Equipment

Used

PRICE: $149,800 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 148133
MAKE:: Komatsu
MODEL:: D39E-24
Location:: Pennsylvania

Model Number: D39E-24
Manufacturer: Komatsu
Subtype: Earth Moving and Construction
Fuel Type: Diesel
Engine Specifications:
- Engine Model: Komatsu SAA4D95LE-6
- Engine Type: 4-Cylinder, Water-Cooled
- Displacement: 149.3 cu in (2.45 L)
- Power Output: 39.5 HP (29.4 kW) at 2,200 RPM
- Torque: 95 lb-ft (128 Nm) at 1,400 RPM
Dimensions:
- Overall Length: 133.5 in (3,390 mm)
- Overall Width: 58.3 in (1,480 mm)
- Overall Height: 93.5 in (2,375 mm)
- Wheelbase: 90.6 in (2,300 mm)
- Ground Clearance: 12.6 in (320 mm)
Weight: 8,050 lb (3,650 kg)
Performance:
- Maximum Speed: 6.8 mph (11 km/h)
- Gradeability: 30% (17 degrees)
Hydraulic System:
- Pump Type: Gear Pump
- Flow Rate: 12.6 gal/min (47.8 L/min)
- Operating Pressure: 3,000 psi (20.7 MPa)
Transmission:
- Type: Hydrostatic Drive
- Number of Gears: 2 Forward, 1 Reverse
Tracks:
- Track Width: 12 in (300 mm)
- Track Length on Ground: 63 in (1,600 mm)
Cab Features:
- Operator Seat: Adjustable with armrests
- Climate Control: Heating and Ventilation
- Instrument Panel: Easy to read display with warning lights
Attachments:
- Bucket Capacity: Varies
- Common Attachments: Dirt Bucket, Grading Bucket, Ripper

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2019 Volvo EC220EL

National Lift Equipment

Used

PRICE: $89,750 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 148130
MAKE:: Volvo
MODEL:: EC220EL
FUEL:: Diesel
HOURS:: 2730 Hrs
Location:: Pennsylvania

Manufacturer
- Volvo
Model Number
- EC220EL
Type
- Forklift
Dimensions
- Length: Approximately 32 feet
- Width: Approximately 10 feet
- Height: Approximately 10 feet
- Ground Clearance: Approximately 1.5 feet
Engine
- Engine Type: Diesel
- Horsepower: Approximately 175 hp
- Displacement: Approximately 336 cubic inches
Capacity
- Max Load Capacity: Approximately 48,500 lbs
Performance
- Travel Speed: Approximately 3 mph
Operational
- Fuel Capacity: Approximately 79 gallons
- Hydraulic System Volume: Approximately 63 gallons
Tires
- Type: Pneumatic
- Size: 23.5 inches

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2023 Komatsu PC238USLC

National Lift Equipment

Used

PRICE: $239,875 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 148128
MAKE:: Komatsu
MODEL:: PC238USLC
Location:: Pennsylvania

Model Number: PC238USLC
Manufacturer: Komatsu
Subtype: Earth Moving and Construction
Fuel Type Used: Diesel
Engine Specifications:
- Type: Komatsu SAA6D107E-1
- Power: Approximately 160 HP
- Displacement: Approximately 6.7 L
- Cylinders: 6
Dimensions:
- Overall Length: Approximately 23 ft
- Overall Width: Approximately 8 ft
- Overall Height: Approximately 9 ft
- Operating Weight: Approximately 54,000 lbs
Performance:
- Bucket Capacity: Varies
- Digging Depth: Varies
- Tail Swing Radius: Approximately 5.6 ft
- Reach at Ground Level: Varies
Hydraulic System:
- Type: Closed-center
- Maximum Flow: Approximately 45 GPM
- Maximum Pressure: Approximately 5,000 psi
Tracks:
- Track Type: Steel
- Track Width: Approximately 18 in
- Ground Clearance: Approximately 1.5 ft
Cab Features:
- Operator Comfort: Ergonomically designed
- Heating and Cooling: Air conditioning available
- Control Type: Joystick control
Electrical System:
- Voltage: 24 V
- Alternator: Approximately 50 A
- Battery: 2 x 12 V

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2016 Hitachi ZX250 LC-6

4M Iron

Used

PRICE: $110,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 18409
MAKE:: Hitachi
MODEL:: ZX250 LC-6
Location:: South Carolina

General Specifications
- Model Number: ZX250 LC-6
- Manufacturer: Hitachi
- Subtype: Earth Moving and Construction
Engine
- Engine Model: Isuzu
- Displacement: 389 cubic inches
- Net Power: 188 HP
- Engine Type: 4-cycle diesel
Dimensions
- Operating Weight: 54,450 lbs
- Overall Length: 32 ft 3 in
- Overall Width: 10 ft 2 in
Performance
- Bucket Capacity: 0.66 to 1.57 cubic yards
- Maximum Digging Depth: 24 ft 7 in
- Maximum Cutting Height: 34 ft 4 in
- Maximum Dumping Height: 21 ft 2 in
Hydraulics
- Hydraulic System Pressure: 4,980 psi
- Pump Type: Variable displacement axial piston
- Total Hydraulic Flow: 111 gallons per minute
Undercarriage
- Track Length: 14 ft 11 in
- Width of Shoe: 31.5 in
- Track Gauge: 8 ft 2 in
Capacities
- Fuel Tank: 107 gallons
- Hydraulic Tank: 46.2 gallons
- Coolant: 7.6 gallons

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2016 Hitachi ZX350 LC-6N

4M Iron

Used

PRICE: $61,750 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 18418
MAKE:: Hitachi
MODEL:: ZX350 LC-6N
Location:: South Carolina

Engine
- Model: ISUZU 6HK1
- Type: 4-cycle water-cooled, direct injection, turbocharged
- Engine Output: 268 hp (gross)
- Displacement: 476 cubic inches
Dimensions
- Operating Weight: 77,848 lbs
- Shipping Weight: 74,158 lbs
- Overall Length: 37 ft
- width: 11 ft 6 in
- Overall Height: 9 ft 11 in
Performance
- Ground Pressure: 7.3 psi
- Max Digging Depth: 26 ft 2 in
- Bucket Capacity: 1.6 - 2.5 yd³
- Digging Reach: 38 ft 9 in
Hydraulics
- Pump Type: Variable Displacement Axial Piston Pump
- Maximum Flow: 95.1 gal/min
- Relief Valve Setting: 4,970 psi
Undercarriage
- Shoe Width: 27.5 in
- Swing Speed: 10.5 rpm
Capacities
- Fuel Tank: 183 gallons
- Engine Coolant: 11 gallons
- Hydraulic System: 90 gallons

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2019 Yale GLC060VX

Chicago Industrial Equipment

Used

PRICE: $15,985 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 29061
MAKE:: Yale
MODEL:: GLC060VX
MAST TYPE:: Three Stage
MAST - RAISED:: 200 in
FUEL:: LP Gas
HOURS:: 4404 Hrs
SIDESHIFTER:: YES
CAPACITY:: 6000 lbs
Location:: Illinois

Model Information
- Model Number: GLC060VX
- Manufacturer: Yale
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
Engine
- Type: Internal Combustion, LPG
- Engine Model: PSI 4X 2.4L LP
- Power: Approximately 65 HP
Dimensions
- Overall Length: Approximately 112 inches
- Overall Width: Approximately 50 inches
- Wheelbase: Approximately 70 inches
- Height to Top of Overhead Guard: Approximately 83 inches
Performance
- Load Capacity: 6,000 lbs
- Load Center: 24 inches
- Max Travel Speed: Approximately 12 mph (laden)
- Max Gradeability: Approx. 34% (laden)
Tires
- Front: Pneumatic
- Rear: Pneumatic
Hydraulics
- Hydraulic System Pressure: Approximately 3,300 psi
Weights
- Service Weight: Approximately 9,340 lbs

Chicago Industrial Equipment
Justin Cyrnek: 815 569 6499
600 Oakwood Ct
Rockdale, IL 60436

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2019 Yale OS030EF

Chicago Industrial Equipment

Used

PRICE: $9,985 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 29063
MAKE:: Yale
MODEL:: OS030EF
MAST TYPE:: Three Stage
MAST - RAISED:: 213 in
FUEL:: Electric
HOURS:: 5067 Hrs
CAPACITY:: 3000 lbs
Location:: Illinois

General Specifications
- Model Number: OS030EF
- Manufacturer: Yale
- Type: Forklift
- Fuel Type: Electric
Dimensions
- Overall Length: Approximately 92 inches
- Overall Width: 40 inches
- Overall Height: 82 inches
- Wheelbase: 57 inches
- Ground Clearance: 3 inches
Performance
- Power Source: Electric Motor
- Load Capacity: 3,000 lbs
- Travel Speed: 5.6 mph (laden), 6.2 mph (unladen)
Battery and Electrical
- Battery Voltage: 24V
- Battery Capacity: 775 Ah
- Battery Weight: 1,550 lbs
Chassis
- Tire Type: Cushion
- Steering: Electric Power Steering
- Braking System: Regenerative and Hydraulic
Forks
- Fork Length: Varies
- Fork Width: 4 inches
- Fork Thickness: 1.5 inches
Other Features
- Operator Compartment: Stand-up Rider
- Control Type: Fingertip Controls
- Safety Features: Integrated presence detection system

Chicago Industrial Equipment
Justin Cyrnek: 815 569 6499
600 Oakwood Ct
Rockdale, IL 60436

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2019 Bendi B40/48AC-180D

Chicago Industrial Equipment

Used

PRICE: $45,985 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 29049
MAKE:: Bendi
MODEL:: B40/48AC-180D
MAST TYPE:: Three Stage
MAST - RAISED:: 198 in
FUEL:: Electric
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Location:: Illinois

Manufacturer: Bendi
Model Number: B40/48AC-180D
Type: Forklift
Powertrain
- Power Source: Electric
- Motor Type: AC
- Battery Voltage: 48V DC
Capacity
- Load Capacity: Up to 4,800 lbs
Dimensions
- Overall Width: Approximately 48 inches
- Overall Length: Varies
- Turning Radius: Approximately 130 inches
Performance
- Travel Speed: Approximately 6.5 mph (loaded)
Tires
- Tire Type: Solid
Operator Convenience
- Adjustable Steering Column
- Ergonomic Controls
Safety Features
- Seat Belt
- Overhead Guard

Chicago Industrial Equipment
Justin Cyrnek: 815 569 6499
600 Oakwood Ct
Rockdale, IL 60436

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2019 Bendi B40/48AC-180D

Chicago Industrial Equipment

Used

PRICE: $45,985 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 29050
MAKE:: Bendi
MODEL:: B40/48AC-180D
MAST TYPE:: Three Stage
MAST - RAISED:: 198 in
FUEL:: Electric
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Location:: Illinois

Manufacturer: Bendi
Model Number: B40/48AC-180D
Type: Forklift
Powertrain
- Power Source: Electric
- Motor Type: AC
- Battery Voltage: 48V DC
Capacity
- Load Capacity: Up to 4,800 lbs
Dimensions
- Overall Width: Approximately 48 inches
- Overall Length: Varies
- Turning Radius: Approximately 130 inches
Performance
- Travel Speed: Approximately 6.5 mph (loaded)
Tires
- Tire Type: Solid
Operator Convenience
- Adjustable Steering Column
- Ergonomic Controls
Safety Features
- Seat Belt
- Overhead Guard

Chicago Industrial Equipment
Justin Cyrnek: 815 569 6499
600 Oakwood Ct
Rockdale, IL 60436

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2004 Yale GLP155CANGBE113

Lee Cassam & Associates

Buy or Rent

PRICE: $49,000 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

RENTAL

CONTACT

MAKE:: Yale
MODEL:: GLP155CANGBE113
MAST TYPE:: Three Stage
MAST - LOWERED:: 110 in
MAST - RAISED:: 220 in
FUEL:: LP Gas
HOURS:: 6466 Hrs
SIDESHIFTER:: NO
CAPACITY:: 15500 lbs
Location:: Texas

FORK POSITIONER rental ready HOURS 6466

Manufacturer: Yale
Model Number: GLP155CANGBE113
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: LP Gas

Performance:
- Load Capacity: 15,500 lbs
- Engine Power: Approximately 97 horsepower
- Travel Speed Loaded: Approximately 14 mph
- Gradeability Loaded: Approximately 30%

Dimensions:
- Length to Fork Face: Approximately 136 inches
- Width: Approximately 72 inches
- Height to Top of Overhead Guard: Approximately 104 inches
- Wheelbase: Approximately 92 inches
- Ground Clearance: Approximately 9 inches

Forks:
- Fork Length: Varies

Operator Environment:
- Seat: Adjustable with suspension
- Steering: Hydrostatic power steering
- Controls: Ergonomic hydraulic levers
- Cabin: Optional enclosed cab

Tires:
- Type: Pneumatic
- Number of Wheels: 4

CALL FOR RENTAL RATES

Reserve Rental

All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.

Lee Cassam & Associates
Lee Cassam: 817 838 5438
2108 Delante St
Haltom City, TX 76117

Finance at $/mo

Lee Cassam & Associates
2108 Delante St

Haltom City, TX 76117

817 838 5438

New Tec

New Tec, Inc.

Used

PRICE: CALL FOR PRICE

Get Quote

Get Brochure

DETAILS

DESCRIPTION

CONTACT

STK#:: X1080-01
MAKE:: New Tec
Location:: Iowa

Safety chain included. Drawbar and ball not included.

New Tec, Inc.
Joe or Marlin: 866-369-0505
3764 US 75 Ave
Sioux Center, IA 51250

NOTIFY ME TEXT SELLER MORE FROM SELLER DEALER WEBSITE

New Tec, Inc.
3764 US 75 Ave

Sioux Center, IA 51250

866-369-0505

2013 New Tec Face & Side Mount available

New Tec, Inc.

Used

PRICE: CALL FOR PRICE

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 0004
MAKE:: New Tec
MODEL:: Face & Side Mount available
CLASS:: I
Location:: Iowa

Universal Mounting Load Backrest, adj 36" - 50"

General Specifications
- Model Number: FACE & SIDE MOUNT AVAILABLE
- Manufacturer: New Tec
- Type: Attachment
- Subtype: Specialized & Other
Dimensions
- Overall Length: 10 ft
- Overall Width: 5 ft
- Overall Height: 4 ft
Performance
- Load Capacity: 4,000 lbs
- Travel Speed: 15 mph
- Power Type: Electric
Weight
- Attachment Weight: 800 lbs
Forks
- Fork Length: Varies
- Fork Width: 4 in
- Adjustable Forks: Yes
Wheels
- Wheelbase: 6 ft
- Tire Type: Pneumatic
Electrical
- Battery Voltage: 48V
- Charger Type: Onboard
Features
- Quick Attach System: Yes
- Side Shift Capability: Yes

New Tec, Inc.
Joe or Marlin: 866-369-0505
3764 US 75 Ave
Sioux Center, IA 51250

NOTIFY ME TEXT SELLER MORE FROM SELLER DEALER WEBSITE

New Tec, Inc.
3764 US 75 Ave

Sioux Center, IA 51250

866-369-0505

1980 Cat T-300

Lee Cassam & Associates

Used

PRICE: CALL FOR PRICE

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Cat
MODEL:: T-300
MAST TYPE:: Two Stage
MAST - LOWERED:: 107 in
MAST - RAISED:: 104 in
FUEL:: LP Gas
HOURS:: 1842 Hrs
SIDESHIFTER:: NO
CAPACITY:: 30000 lbs
Location:: Texas

CAT-300 WITH BOOM. 30000#lbs CAPACITY LOW HOURS

Manufacturer: Cat
Model Number: T-300
Type: Forklift
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type: LP Gas

Dimensions

Overall Length: Approximately 114 inches (varies based on fork length)
Overall Width: 42 inches
Overall Height to Top of Overhead Guard: 84 inches
Wheelbase: 68 inches
Ground Clearance: 3.5 inches

Engine

Engine Type: 4-cylinder LPG engine
Displacement: 3.0 liters (approx. 183 cubic inches)
Engine Power: 63 HP
Fuel Tank Capacity: 33.5 lbs LPG

Capacity

Load Capacity: 6,000 lbs

Tires

Total Number of Tires: 4
Tire Type: Cushion
Front Tire Size: 18 x 5 x 12.125 inches
Rear Tire Size: 16 x 5 x 10.5 inches

Performance

Travel Speed: 11 mph (loaded)
Lifting Speed: 0.7 feet per second (loaded)
Turning Radius: 89 inches
Gradeability: 30% (loaded)

Hydraulics

Hydraulic Pump Capacity: 17 gallons per minute

Additional Features

Pneumatic Seat: Adjustable with seatbelt
Operator Display: Multifunctional digital display
Steering: Power steering for easy maneuverability

Lee Cassam & Associates
Lee Cassam: 817 838 5438
2108 Delante St
Haltom City, TX 76117

NOTIFY ME TEXT SELLER MORE FROM SELLER DEALER WEBSITE

Lee Cassam & Associates
2108 Delante St

Haltom City, TX 76117

817 838 5438

2005 Yale GDC155CANPBV106

Heavy Lift Sales, Rentals & Leasing

Used

PRICE: CALL FOR PRICE

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 5410208
MAKE:: Yale
MODEL:: GDC155CANPBV106
MAST TYPE:: Two Stage
MAST - LOWERED:: 106 in
MAST - RAISED:: 133 in
FUEL:: Diesel
HOURS:: 696 Hrs
CAPACITY:: 15500 lbs
Location:: New York

Hrs: 696; Tires: Front Good, Back Good; Trans: Automatic;

General Information
- Model Number: GDC155CANPBV106
- Manufacturer: Yale
- Type: Forklift
- Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
- Fuel Type: Diesel
Dimensions
- Overall Length: 141 inches
- Overall Width: 55 inches
- Height to Top Overhead Guard: 86 inches
- Wheelbase: 74 inches
Weight
- Service Weight: 18,200 pounds
- Axle Load without Load, Front: 9,800 pounds
- Axle Load without Load, Rear: 8,400 pounds
Performance
- Rated Capacity: 15,500 pounds
- Max Travel Speed: 19 mph
- Lift Speed: 100 feet/minute
- Lowering Speed: 98 feet/minute
Engine
- Engine Manufacturer: Cummins
- Engine Model: QSF3.8
- Rated Power: 99 horsepower
- Max Torque: 318 lb-ft
- Displacement: 230 cubic inches
Tires
- Tire Type: Cushion
- Tire Size Front: 22x9-16
- Tire Size Rear: 18x7-12.1/8
Hydraulic System
- Hydraulic Tank Capacity: 15 gallons
Forks
- Fork Length: Varies
- Fork Width: 6 inches
- Fork Thickness: 2 inches
Brakes
- Service Brake: Hydraulic
- Parking Brake: Hand Operated

Heavy Lift Sales, Rentals & Leasing
Sales Department: 716-221-2022
1967 Wehrle Dr.
Buffalo, NY 14221

Heavy Lift Sales, Rentals & Leasing
1967 Wehrle Dr.

Buffalo, NY 14221

716-221-2022

Tennant 7100

Budget Lifts Inc

Used

PRICE: CALL FOR PRICE

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Tennant
MODEL:: 7100
FUEL:: Electric
Location:: Virginia

NEW BRUSHES GOOD SHAPE

Manufacturer: Tennant
Model Number: 7100
Type: Sweeper/Scrubber

Dimensions:
- Length: Approximately 60 inches
- Width: Approximately 32 inches
- Height: Approximately 50 inches
Cleaning System:
- Scrubbing Path Width: 28 inches
- Brush/Pad Diameter: 14 inches
- Brush Motor Power: 0.75 hp
Solution & Recovery Systems:
- Solution Tank Capacity: Approximately 29 gallons
- Recovery Tank Capacity: Approximately 29 gallons
Power System:
- Voltage: 24V Battery
- Battery Amp Hours: Typically 240 Ah
Performance:
- Cleaning Rate: Up to 28,000 sq ft/hr
- Drive Motor Power: 0.75 hp
- Maximum Speed: 3.6 mph
Additional Features:
- No-tool brush and squeegee change
- Adjustable down pressure
- E-Z empty debris tray

Budget Lifts Inc
Chris: 804-424-5070
6825 Hull St
Richmond, VA 23224

NOTIFY ME TEXT SELLER MORE FROM SELLER

Budget Lifts Inc
6825 Hull St

Richmond, VA 23224

804-424-5070

2006 Toyota 7FGCU60

Forklifts Parts & Equipment

Used

PRICE: $39,500 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Toyota
MODEL:: 7FGCU60
MAST TYPE:: Three Stage
MAST - LOWERED:: 95 in
MAST - RAISED:: 187 in
FUEL:: LP Gas
HOURS:: 6128 Hrs
SIDESHIFTER:: YES
CAPACITY:: 13500 lbs
Location:: Florida

FULL SERVICES, NEW BATTERY, FOUR VALVE, THREE STAGE MAST

General Specifications
- Model Number: 7FGCU60
- Manufacturer: Toyota
- Type: Forklift
Dimensions
- Overall Length: 149.2 inches
- Overall Width: 55.9 inches
- Overall Height: 85.6 inches
- Wheelbase: 82.7 inches
- Ground Clearance: 8.3 inches
Engine
- Engine Type: LPG/Gasoline
- Engine Model: Toyota 1FZ
- Number of Cylinders: 6
- Displacement: 4.5 L
Capacity
- Load Capacity: 12,000 lbs
Performance
- Max Travel Speed: 11.5 mph
- Gradeability: 27%
- Turning Radius: 106.7 inches
Forks
- Standard Fork Length: Varies
Tires
- Front Tires: 8.25-15-14PR
- Rear Tires: 8.25-15-14PR
Fuel Tank
- Fuel Capacity: 33.5 gallons
Brakes
- Service Brake: Hydraulic, foot applied
- Parking Brake: Mechanical, hand operated
Hydraulic System
- Hydraulic Pump Type: Gear
- Hydraulic Pressure: 2,990 psi

Forklifts Parts & Equipment
Arturo: 786-475-8799
7695 NW 63 St.
Miami, FL 33166

Finance at $/mo

Forklifts Parts & Equipment
7695 NW 63 St.

Miami, FL 33166

786-475-8799

2004 Cat GC25K

Forklifts Parts & Equipment

Used

PRICE: $10,500 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Cat
MODEL:: GC25K
MAST TYPE:: Three Stage
MAST - LOWERED:: 83 in
MAST - RAISED:: 189 in
FUEL:: LP Gas
CAPACITY:: 5000 lbs
Location:: Florida

Reconditioned Forklift, new paint and tires

General Specifications
- Manufacturer: Cat
- Model Number: GC25K
- Type: Cushion Tire Forklift
- Fuel Type: LPG (Liquid Propane Gas)
Dimensions
- Overall Length (without forks): 8.5 ft
- Overall Width: 3.7 ft
- Overall Height: 7.8 ft
- Wheelbase: 5.5 ft
- Ground Clearance: 4.3 in
Weight
- Service Weight: Approximately 8,600 lbs
Engine
- Model: K21
- Type: 4-cylinder LPG engine
- Horsepower: Approx. 50 HP
Performance
- Load Capacity: 5,000 lbs
- Travel Speed: Up to 10 mph
Other Features
- Transmission: Power shift transmission
- Steering: Hydraulic power steering
- Safety Features: Overhead guard and seat belt

Forklifts Parts & Equipment
Arturo: 786-475-8799
7695 NW 63 St.
Miami, FL 33166

Finance at $/mo

Forklifts Parts & Equipment
7695 NW 63 St.

Miami, FL 33166

786-475-8799

2024 New 42 x46

Forklifts Group

New

PRICE: CALL FOR PRICE

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: Wire Decking Rack
MAKE:: New
MODEL:: 42 x46
Location:: California

Wire mesh Decking in Stock. Heavy Duty USA-400 in stock

Model Number: 42 X46
Manufacturer: New
Subtype: Racking, Shelving & Conveyor Products

Dimensions:
- Width: 46 inches
- Height: 72 inches
- Depth: 42 inches
Material:
- Frame Material: Steel
- Shelf Material: Steel with powder coating
Capacity:
- Weight Capacity Per Shelf: 400 lbs
- Total Weight Capacity: 2000 lbs
Design and Structure:
- Number of Shelves: 5
- Shelf Adjustability: Adjustable in 2-inch increments
- Color: Industrial Gray
Features:
- Easy assembly with no special tools required
- Anti-sway braces for added stability
- Moisture-resistant coating
Applications:
- Ideal for warehouse storage
- Perfect for organizing tools and equipment
- Suitable for industrial and commercial use

Forklifts Group Fresno
Cody Anderson : 559-268-6621
6131 S. Lincoln Ct
Fresno, CA 93625

Forklifts Group
6131 S. Lincoln Ct

Fresno, CA 93625

559-268-6621

1998 Raymond 112TMFRE

L.A. Lift Services

Used

PRICE: $5,200 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

WARRANTY

STK#:: U08086
MAKE:: Raymond
MODEL:: 112TMFRE
MAST TYPE:: Six inch lift (walkie)
FUEL:: Electric
SIDESHIFTER:: NO
CAPACITY:: 6000 lbs
Location:: California

24V

General Specifications
- Model Number: 112TMFRE
- Manufacturer: Raymond
- Type: Forklift
- Subtype: Electric Walkie/Rider Pallet Jack
- Fuel Type: Electric
Power Source
- Drive Motor: Electric
- Battery Voltage: 24V
Dimensions
- Overall Length:
- Overall Width:
- Height to Top of Headguard:
Performance
- Load Capacity: 4,500 lbs
- Travel Speed (laden/unladen): 3.1/3.4 mph
- Lift Speed (laden/unladen):
- Ground Clearance:
Forks
- Fork Length: Varies
- Fork Width:
- Fork Thickness:
Wheels and Tires
- Tire Type: Polyurethane
- Tire Size (front/rear):
Additional Features
- Operator Position: Stand-on
- Controls: Hand Operated

L.A. Lift Services
Sales Dept.: 323-621-3686
4368 Bandini Blvd.
Vernon, CA 90058

30 DAY WARRANTY

Finance at $/mo

L.A. Lift Services
4368 Bandini Blvd.

Vernon, CA 90058

323-621-3686

1998 Raymond 112TMFRE

L.A. Lift Services

Used

PRICE: $5,200 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

WARRANTY

STK#:: U08091
MAKE:: Raymond
MODEL:: 112TMFRE
MAST TYPE:: Six inch lift (walkie)
FUEL:: Electric
SIDESHIFTER:: NO
CAPACITY:: 6000 lbs
Location:: California

24V

General Specifications
- Model Number: 112TMFRE
- Manufacturer: Raymond
- Type: Forklift
- Subtype: Electric Walkie/Rider Pallet Jack
- Fuel Type: Electric
Power Source
- Drive Motor: Electric
- Battery Voltage: 24V
Dimensions
- Overall Length:
- Overall Width:
- Height to Top of Headguard:
Performance
- Load Capacity: 4,500 lbs
- Travel Speed (laden/unladen): 3.1/3.4 mph
- Lift Speed (laden/unladen):
- Ground Clearance:
Forks
- Fork Length: Varies
- Fork Width:
- Fork Thickness:
Wheels and Tires
- Tire Type: Polyurethane
- Tire Size (front/rear):
Additional Features
- Operator Position: Stand-on
- Controls: Hand Operated

L.A. Lift Services
Sales Dept.: 323-621-3686
4368 Bandini Blvd.
Vernon, CA 90058

30 DAY WARRANTY

Finance at $/mo

L.A. Lift Services
4368 Bandini Blvd.

Vernon, CA 90058

323-621-3686

2004 Yale MSW40

Lee Cassam & Associates

Used

PRICE: $6,990 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Yale
MODEL:: MSW40
MAST TYPE:: Two Stage
MAST - LOWERED:: 83 in
MAST - RAISED:: 130 in
FUEL:: Electric
HOURS:: 2700 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Location:: Texas

WITH SIDE SHIFT 2700 HOURS ON THE UNIT LIKE NEW

Manufacturer: Yale
Model Number: MSW40
Type: Forklift
Subtype: Electric Walkie Straddle Stacker
Fuel Type: Electric

Performance

Load Capacity: 4,000 lbs
Travel Speed (laden/unladen): 3.2 mph / 3.4 mph
Lift Speed (laden/unladen): 17 ft/min / 28 ft/min
Lowering Speed (laden/unladen): 55 ft/min / 32 ft/min

Dimensions

Overall Length: 85 to 93 inches
Overall Width: 42 inches
Overall Height (top of mast lowered): 82 inches
Fork Length: Varies
Fork Width: 3.5 inches
Fork Thickness: 1.4 inches
Wheelbase: 50 inches

Power

Voltage: 24V
Battery Capacity: 270 Ah
Charger: Built-in 115V, 60Hz

Weight

Service Weight: Approximately 2,775 lbs

Tires

Tire Type: Polyurethane
Drive Wheel Size: 10 inches
Load Wheel Size: 4 inches

Lee Cassam & Associates
Lee Cassam: 817 838 5438
2108 Delante St
Haltom City, TX 76117

Finance at $/mo