1 Aisle-Master Articulated 4 Wheel Sitdown - Gas/Electric Forklift for Rent

2019 Bendi B40/48i5180D

National Lift Equipment

Used

PRICE: $27,850 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 151982
MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Three Stage
MAST - RAISED:: 198 in
FUEL:: LP Gas
HOURS:: 5620 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Pennsylvania

Model Number: B40/48I5-180D
Manufacturer: Bendi
Type: Forklift
Fuel Type: LP Gas

Dimensions and Weight

Overall Length: Approximately 125 inches
Overall Width: Approximately 48 inches
Wheelbase: Approximately 70 inches
Fork Length: Varies
Ground Clearance: Approximately 3 inches
Weight: Around 8,000 lbs (varies by configuration)

Performance

Load Capacity: 4,000 - 5,000 lbs
Travel Speed: Up to 9 mph
Lift Speed: Approximately 65 feet per minute
Lowering Speed: Approximately 90 feet per minute

Tire Specifications

Tire Type: Cushion
Front Tires: 18 x 6 x 12.1 inches
Rear Tires: 15 x 4 x 8 inches

Engine and Transmission

Engine Type: Internal Combustion Engine
Fuel: LP Gas
Transmission Type: Hydrostatic Drive

Additional Features

Advanced Ergonomics for Operator Comfort
Electronic Directional and Speed Controls
360-degree Visibility
Pneumatic Suspension Seat

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

National Lift Equipment
300 Pond St.

Bristol, PA 19007

(215) 544-2708

Bristol, Pennsylvania 19007

2019 Bendi B30AC

Big Joe Handling Systems

Used

PRICE: $65,400 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 117684
MAKE:: Bendi
MODEL:: B30AC
MAST TYPE:: Three Stage
MAST - LOWERED:: 87 in
MAST - RAISED:: 198 in
FUEL:: Electric
HOURS:: 3872 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

General Specifications
- Model Number: B30AC
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Electric Narrow Aisle Single Reach
Power Source
- Power Type: Electric
- Battery Voltage: 48 volts
Capacity
- Load Capacity: 3,000 lbs
Dimensions
- Aisle Width for 90° Stack: Approx. 7.66 ft
- Overall Length: Varies (depending on options)
- Overall Height: Approx. 7.5 ft
- Overall Width: Approx. 3.5 ft
Performance
- Travel Speed: Approx. 6 mph
- Lift Speed: Approx. 50 ft/min
- Lowering Speed: Approx. 90 ft/min
Tires
- Tire Type: Cushion
- Front/Drive: Dual
- Rear/Steer: Single
Forks
- Fork Length: Varies
Additional Features
- 360° Pivot Steer
- AC Drive Motor
- Ergonomic Controls

Big Joe Handling Systems
Sales Dept: 510-617-1990
25932 Eden Landing Rd
Hayward, CA 94545

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

Big Joe Handling Systems
25932 Eden Landing Rd

Hayward, CA 94545

510-617-1990

Hayward, California 94545

2026 Bendi

Dade Lift

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

WARRANTY

CONTACT

MAKE:: Bendi
MAST TYPE:: Quad Mast
MAST - LOWERED:: 89 in
MAST - RAISED:: 258 in
FUEL:: Electric
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Florida

call for pricing!

NEW UNICARRIERS 2 YEARS UNLIMITED HOURS WARRANTY, 4 YEARS / 8,000 HOURS EXTENDED DEALER ADD-ON

Dade Lift
Michael Machin: 305-885-5055
12612 NW South River Dr.
Medley, FL 33178

Dade Lift
12612 NW South River Dr.

Medley, FL 33178

305-885-5055

Medley, Florida 33178

2007 Flexi G3

Birnstengel Equipment

Used

PRICE: $10,500 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

CONTACT

FINANCE

STK#:: B07286
MAKE:: Flexi
MODEL:: G3
MAST TYPE:: Three Stage
MAST - LOWERED:: 101 in
MAST - RAISED:: 194 in
FUEL:: Electric
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Minnesota

48 volt Side shift Fork positioner

Birnstengel Equipment
Mike or James: Mike 763-234-4303 or James 763-443-5429
2721 Nevada Ave N
New Hope, MN 55427

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

Birnstengel Equipment
2721 Nevada Ave N

New Hope, MN 55427

Mike 763-234-4303 or James 763-443-5429

New Hope, Minnesota 55427

2018 Aisle-Master 44E

Global Fleet Solutions

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

STK#:: EQC014422
MAKE:: Aisle-Master
MODEL:: 44E
MAST TYPE:: Three Stage
FUEL:: Electric
HOURS:: 8527 Hrs
CAPACITY:: 4400 lbs
Unit Location:: Ontario

General Specifications
- Model Number: 44E
- Manufacturer: Aisle-Master
- Type: Forklift
- Subtype: Articulated 4 Wheel Sitdown
- Fuel Type: Gas/Electric (Hybrid)
Dimensions
- Overall Length: Approximately 9 feet (excluding forks)
- Overall Width: Approximately 4 feet
- Wheelbase: Approximately 5.5 feet
- Ground Clearance: About 0.33 feet
- Overhead Guard Height: Roughly 7.5 feet
Performance
- Load Capacity: 4,400 lbs
- Drive Speed: Approximately 9 mph (without load)
- Battery Capacity: Varies, depending on model and configuration
- Turning Radius: Approximately 6 feet
Tires
- Type: Cushion
- Front Tire Size: 18 inches
- Rear Tire Size: 14 inches
Additional Features
- Steering: Power Steering
- Brake Type: Hydraulic
- Operator's Seat: Adjustable with suspension
Electrical System
- Battery Voltage: 48V
- Alternator Output: Varies depending on configuration

Global Fleet Solutions
Sales Rep: 1 888 451 2398
17300 W Valley Hwy
Seattle, WA 98188

SEE SIMILAR UNITS MORE FROM SELLER

Global Fleet Solutions
17300 W Valley Hwy

Seattle, WA 98188

1 888 451 2398

Seattle, Washington 98188

2008 Bendi B3/30E180D

1 Source Material Handling, Inc.

Buy or Rent

PRICE: $29,988 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

RENTAL

CONTACT

STK#:: U08180310
MAKE:: Bendi
MODEL:: B3/30E180D
MAST TYPE:: Three Stage
MAST - LOWERED:: 118 in
MAST - RAISED:: 222 in
FUEL:: Electric
HOURS:: 6172 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

72"- Aisle with 48" Deep Load (Other models need 84")

Model Information

Model Number: B3/30E180D
Manufacturer: Bendi
Type: Forklift
Subtype: Electric Man Down Swing Reach Turret

Power Source

Fuel Type: Electric

Performance

Load Capacity: Approximately 3,000 lbs
Travel Speed (Loaded/Unloaded): Approximately up to 6.8 mph
Battery Voltage: 48V

Dimensions

Overall Width: Approximately 48 inches
Overall Length: Approximately 102 inches
Overall Height: Approximately 80 inches
Turning Radius: Approximately 55 inches

Fork Dimensions

Fork Length: Varies

Weight

Approximate Weight: 9,500 lbs

MONTHLY RENTAL: $3,500 USD
WEEKLY RENTAL: $1,400 USD
DAILY RENTAL: $350 USD; Reserve Rental

All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.

1 Source Material Handling, Inc.
Sales Dept: 1 818 593 0020
15519 Arrow Highway
Irwindale, CA 91706

Finance at $/mo

SEE SIMILAR UNITS

1 Source Material Handling, Inc.
15519 Arrow Highway

Irwindale, CA 91706

1 818 593 0020

Irwindale, California 91706

2011 Bendi B35E

Patterson Lift Trucks Inc

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: R1155
MAKE:: Bendi
MODEL:: B35E
MAST TYPE:: Quad Mast
MAST - RAISED:: 240 in
FUEL:: Electric
HOURS:: 5072 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3500 lbs
Unit Location:: California

SOLD AS IS.

General Information
- Model Number: B35E
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Articulated 4 Wheel Sitdown
- Fuel Type: Gas/Electric
Performance
- Power Source: fuelstartElectricfuelend
- Load Capacity: 3,500 lbs
- Drive: 4 Wheel
- Travel Speed: Approximately 8-10 mph (unloaded)
Dimensions
- Overall Length: Approximately 124 inches
- Overall Width: Approximately 44 inches
- Height to Top of Overhead Guard: Approximately 88 inches
- Minimum Aisle Width: Approximately 78 inches
Forks
- Fork Length: Varies
Chassis
- Steering System: Articulated, power steering
- Brakes: Hydraulic
Tires
- Tire Type: Cushion
- Tire Size - Front: 18 x 7 x 12.1 inches
- Tire Size - Rear: 15 x 5 x 11.5 inches
Electrical System
- Battery Voltage: 48V
- Battery Capacity: Depending on configuration
- Charger: External or built-in options available

Patterson Lift Trucks Inc
Jake Patterson: (510) 466-1071
975 Industrial Parkway
West Hayward, CA 94544

Patterson Lift Trucks Inc
975 Industrial Parkway

West Hayward, CA 94544

(510) 466-1071

West Hayward, California 94544

2020 VersaLift 40/60 VERSA

Guardian Fleet Solutions

Buy or Rent

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

SPECS

RENTAL

CONTACT

STK#:: SPR068375
MAKE:: VersaLift
MODEL:: 40/60 VERSA
FUEL:: LP Gas
CAPACITY:: 60000 lbs
Unit Location:: Kentucky

General Information
- Model Number: 40/60 VERSA
- Manufacturer: VersaLift
- Type: Forklift
Dimensions and Weight
- Overall Length: 20 feet (approx.)
- Overall Width: 8 feet (approx.)
- Overall Height (Cab): 8.5 feet (approx.)
- Weight: 60,000 lbs (approx.)
Capacity
- Load Capacity: 60,000 lbs at 24-inch load center
Engine
- Engine Type: Diesel
- Power Output: 200 horsepower (approx.)
Performance
- Travel Speed (Loaded): 15 mph (approx.)
- Lift Speed (Loaded): 60 feet/minute (approx.)
- Turning Radius: 12 feet (approx.)
Forks
- Fork Length: Varies
- Fork Width: 8 inches (approx.)
- Fork Thickness: 2.5 inches (approx.)
Tires
- Type: Pneumatic
- Front Tires: 12.00 x 20
- Rear Tires: 12.00 x 20
Hydraulic System
- Operating Pressure: 3,500 psi (approx.)
- Lift Cylinder Diameter: 6 inches (approx.)
Brakes
- Service Brake: Hydraulic
- Parking Brake: Mechanical Hand Operated

MONTHLY RENTAL: $13,500 USD
WEEKLY RENTAL: $4,500 USD
DAILY RENTAL: $1,500 USD; Reserve Rental

All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.

Guardian Fleet Solutions
Cameron Carter : 502-273-0323
3306 Gilmore Industrial Blvd
Louisville, KY 40213

Guardian Fleet Solutions
3306 Gilmore Industrial Blvd

Louisville, KY 40213

502-273-0323

Louisville, Kentucky 40213

2011 Bendi B40/48E180D

TB Forklifts

Buy or Rent

PRICE: $29,900 USD

Get Quote

Download Specs

DETAILS

SPECS

RENTAL

CONTACT

STK#:: 06651
MAKE:: Bendi
MODEL:: B40/48E180D
MAST TYPE:: Three Stage
MAST - LOWERED:: 96 in
MAST - RAISED:: 224 in
FUEL:: Electric
HOURS:: 8167 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Texas

General Specifications
- Model Number: B40/48E-180D
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Multi Directional IC & Electric Sideloading
Powertrain
- Fuel Type: Electric
- Drive Motor Power: Approx. 9 kW (approx. 12 HP)
- Steering Motor Power: Approx. 2 kW (approx. 2.7 HP)
Dimensions
- Overall Length: Approx. 130 inches (without forks, varies with forks)
- Overall Width: Approx. 48 inches
- Overall Height with Overhead Guard: Approx. 88 inches
- Turning Radius: Approx. 100 inches
Performance
- Load Capacity: 8,000 lbs
- Travel Speed: Approx. 9 mph without load
- Lift Speed: 80 ft/min
Features
- Multi-directional steering for maneuverability
- Side loading capability for narrow aisles
- Electric power option for reduced emissions
Brakes and Tires
- Service Brake: Hydraulic
- Parking Brake: Mechanical
- Tire Type: Cushion or Pneumatic options available
Operator Environment
- Ergonomic Operator Console
- Visibility Optimized Design
- Adjustable Steering Column

MONTHLY RENTAL: $3,600 USD
WEEKLY RENTAL: $1,200 USD
DAILY RENTAL: $400 USD; Reserve Rental

All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.

TB Forklifts
Antonio Borboa: 281-746-6799
5410 Mary Francis Dr
Houston, TX 77039

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

TB Forklifts
5410 Mary Francis Dr

Houston, TX 77039

281-746-6799

Houston, Texas 77039

2016 Flexi Euro G4

Matthai Material Handling, Inc.

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Flexi
MODEL:: Euro G4
MAST TYPE:: Three Stage
MAST - RAISED:: 222 in
FUEL:: Electric
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: New Jersey

2016 Flexi G4

Model Number: EURO G4
Manufacturer: Flexi
Type: Forklift
Subtype: Articulated 4 Wheel Sitdown - Gas/Electric
Fuel Type Used: gas/electric
General Specifications:
- Overall Length: varies
- Overall Width: 44 inches
- Overall Height: 85 inches
- Wheelbase: 53 inches
- Turning Radius: 56 inches
- Weight: 4,000 - 5,000 lbs (estimated)
Performance:
- Load Capacity: 4,000 - 5,000 lbs
- Travel Speed: Up to 9 mph
- Gradeability: 15% maximum
Engine Specifications:
- Engine Type: Gasoline/Electric hybrid
- Horsepower: varies based on configuration
- Fuel Capacity: 8 gallons
Electric Specifications:
- Battery Voltage: 48V
- Battery Capacity: 600 Ah
- Charger Type: On-board charger
Operator Console:
- Seat Type: Ergonomic with adjustable armrests
- Control Type: Hydraulic joystick
- Display: LCD screen for operational status
Safety Features:
- Seat Belt: Standard
- Overload Protection: Integrated overload sensor
- Lighting: LED work lights
Accessories:
- Fork Options: Varies; can be customized for specific loads
- Attachment Compatibility: Various attachments available

Matthai Material Handling, Inc.
Randy Matthai or Rich Bartosch: 410-344-1801
1405 Tangier Dr Ste A
Baltimore, MD 21220

Matthai Material Handling, Inc.
1405 Tangier Dr Ste A

Baltimore, MD 21220

410-344-1801

Baltimore, Maryland 21220

2020 Aisle-Master 44NG

1 Source Material Handling, Inc.

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Aisle-Master
MODEL:: 44NG
MAST TYPE:: Three Stage
MAST - LOWERED:: 119 in
MAST - RAISED:: 250 in
FUEL:: LP Gas
HOURS:: 496 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4400 lbs
Unit Location:: Arizona

Like New

Model Number: 44NG
Manufacturer: Aisle-Master
Type: Forklift
Subtype: Articulated 4 Wheel Sitdown - Gas/Electric
Fuel Type Used: LP Gas
Performance:
- Load Capacity: Varies
- Travel Speed: Up to 6 mph
- Turning Radius: Compact design
Dimensions:
- Overall Length: Varies
- Overall Width: 43.3 inches
- Overall Height: 77.2 inches
- Wheelbase: Varies
- Minimum Clearance: 3.5 inches
Weight: Approximately 7,900 lbs
Engine Specifications:
- Engine Type: 4-Cycle Gas Engine
- Horsepower: 55 HP
- Fuel Tank Capacity: 33 lbs
Drive Train:
- Transmission: Hydrostatic
- Drive Wheels: 4
Features:
- Seating: Comfortable operator seat with adjustable options
- Steering: Articulated steering for maneuverability
- Visibility: Excellent visibility for operator safety
- Safety Features: Operator presence system and stability control
Electrical System:
- Batteries: Not applicable for gas models
- Electrical Components: Standard 12V system

1 Source Material Handling, Inc.
Sales Dept: 1 818 593 0020
15519 Arrow Highway
Irwindale, CA 91706

1 Source Material Handling, Inc.
15519 Arrow Highway

Irwindale, CA 91706

1 818 593 0020

Arizona, 85034

2025 Flexi 20s

Mr. Lift Truck, Inc.

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

MAKE:: Flexi
MODEL:: 20s
MAST - RAISED:: 300 in
CAPACITY:: 4400 lbs
Unit Location:: Florida

Model Number: 20S
Manufacturer: Flexi
Type: Forklift
Subtype: Articulated 4 Wheel Sitdown - Gas/Electric
Power Type: Gas/Electric
Weight: Varies based on configuration
Load Capacity: Varies based on configuration
Overall Length: Varies
Overall Width: Varies
Overall Height: Varies
Tires: Pneumatic or Solid
Turning Radius: Varies
Travel Speed: Varies based on power type and load
Battery Voltage (if electric): 36V or 48V
Engine Type (if gas): Varies
Operator Type: Sitdown
Steering Type: Articulated steering

Mr. Lift Truck, Inc.
Greg Woods: 305 767 7556
10450 S.W. 187 Terrace
Miami, FL 33157

Mr. Lift Truck, Inc.
10450 S.W. 187 Terrace

Miami, FL 33157

305 767 7556

Miami, Florida 33157

2019 Bendi B30AC

Big Joe Handling Systems

Used

PRICE: $72,400 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 123199
MAKE:: Bendi
MODEL:: B30AC
MAST TYPE:: Quad Mast
MAST - LOWERED:: 107 in
MAST - RAISED:: 312 in
FUEL:: Electric
HOURS:: 5829 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

General Specifications
- Model Number: B30AC
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Electric Narrow Aisle Single Reach
Power Source
- Power Type: Electric
- Battery Voltage: 48 volts
Capacity
- Load Capacity: 3,000 lbs
Dimensions
- Aisle Width for 90° Stack: Approx. 7.66 ft
- Overall Length: Varies (depending on options)
- Overall Height: Approx. 7.5 ft
- Overall Width: Approx. 3.5 ft
Performance
- Travel Speed: Approx. 6 mph
- Lift Speed: Approx. 50 ft/min
- Lowering Speed: Approx. 90 ft/min
Tires
- Tire Type: Cushion
- Front/Drive: Dual
- Rear/Steer: Single
Forks
- Fork Length: Varies
Additional Features
- 360° Pivot Steer
- AC Drive Motor
- Ergonomic Controls

Big Joe Handling Systems
Sales Dept: 510-617-1990
25932 Eden Landing Rd
Hayward, CA 94545

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

Big Joe Handling Systems
25932 Eden Landing Rd

Hayward, CA 94545

510-617-1990

Hayward, California 94545

2016 Bendi B30AC

National Lift Equipment

Used

PRICE: $27,950 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 149551
MAKE:: Bendi
MODEL:: B30AC
FUEL:: Electric
HOURS:: 5598 Hrs
SIDESHIFTER:: YES
Unit Location:: Pennsylvania

General Specifications
- Model Number: B30AC
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Electric Narrow Aisle Single Reach
Power Source
- Power Type: Electric
- Battery Voltage: 48 volts
Capacity
- Load Capacity: 3,000 lbs
Dimensions
- Aisle Width for 90° Stack: Approx. 7.66 ft
- Overall Length: Varies (depending on options)
- Overall Height: Approx. 7.5 ft
- Overall Width: Approx. 3.5 ft
Performance
- Travel Speed: Approx. 6 mph
- Lift Speed: Approx. 50 ft/min
- Lowering Speed: Approx. 90 ft/min
Tires
- Tire Type: Cushion
- Front/Drive: Dual
- Rear/Steer: Single
Forks
- Fork Length: Varies
Additional Features
- 360° Pivot Steer
- AC Drive Motor
- Ergonomic Controls

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

National Lift Equipment
300 Pond St.

Bristol, PA 19007

(215) 544-2708

Bristol, Pennsylvania 19007

2026 Drexel SL40AC

Stevenson Crane

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

CONTACT

STK#:: 150118476439
MAKE:: Drexel
MODEL:: SL40AC
MAST TYPE:: Quad Mast
MAST - RAISED:: 372 in
FUEL:: Electric
HOURS:: 1 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Illinois

Stevenson Crane
Dominick Savickas: 630-972-9199
410 Stevenson Drive
Bolingbrook, IL 60440

Stevenson Crane
410 Stevenson Drive

Bolingbrook, IL 60440

630-972-9199

Bolingbrook, Illinois 60440

2026 Bendi B30AC

Stevenson Crane

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

CONTACT

STK#:: 89/258" Mast
MAKE:: Bendi
MODEL:: B30AC
MAST TYPE:: Three Stage
MAST - RAISED:: 288 in
FUEL:: Electric
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: Illinois

Stevenson Crane
Dominick Savickas: 630-972-9199
410 Stevenson Drive
Bolingbrook, IL 60440

Stevenson Crane
410 Stevenson Drive

Bolingbrook, IL 60440

630-972-9199

Bolingbrook, Illinois 60440

2026 Bendi B30AC

Stevenson Crane

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

CONTACT

STK#:: 101/294" Mast
MAKE:: Bendi
MODEL:: B30AC
MAST TYPE:: Three Stage
MAST - RAISED:: 288 in
FUEL:: Electric
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: Illinois

Stevenson Crane
Dominick Savickas: 630-972-9199
410 Stevenson Drive
Bolingbrook, IL 60440

Stevenson Crane
410 Stevenson Drive

Bolingbrook, IL 60440

630-972-9199

Bolingbrook, Illinois 60440

2026 Bendi B30AC

Stevenson Crane

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

CONTACT

STK#:: 87/250" Mast
MAKE:: Bendi
MODEL:: B30AC
MAST TYPE:: Three Stage
MAST - RAISED:: 288 in
FUEL:: Electric
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: Illinois

Stevenson Crane
Dominick Savickas: 630-972-9199
410 Stevenson Drive
Bolingbrook, IL 60440

Stevenson Crane
410 Stevenson Drive

Bolingbrook, IL 60440

630-972-9199

Bolingbrook, Illinois 60440

2026 Bendi B30AC

Stevenson Crane

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

CONTACT

STK#:: 95/276" Mast
MAKE:: Bendi
MODEL:: B30AC
MAST TYPE:: Three Stage
MAST - RAISED:: 288 in
FUEL:: Electric
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: Illinois

Stevenson Crane
Dominick Savickas: 630-972-9199
410 Stevenson Drive
Bolingbrook, IL 60440

Stevenson Crane
410 Stevenson Drive

Bolingbrook, IL 60440

630-972-9199

Bolingbrook, Illinois 60440

2026 Bendi B30AC

Stevenson Crane

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

CONTACT

STK#:: 107/312" Mast
MAKE:: Bendi
MODEL:: B30AC
MAST TYPE:: Three Stage
MAST - RAISED:: 288 in
FUEL:: Electric
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: Illinois

Stevenson Crane
Dominick Savickas: 630-972-9199
410 Stevenson Drive
Bolingbrook, IL 60440

Stevenson Crane
410 Stevenson Drive

Bolingbrook, IL 60440

630-972-9199

Bolingbrook, Illinois 60440

2007 Bendi B40E180D

LiftWorks USA

Used

PRICE: $8,950 USD

Get Quote

Download Specs

DETAILS

CONTACT

FINANCE

STK#:: SKU:7523603As-Is
MAKE:: Bendi
MODEL:: B40E180D
MAST - RAISED:: 216 in
FUEL:: Electric
HOURS:: 5800 Hrs
CAPACITY:: 4000 lbs
Unit Location:: California

LiftWorks USA
Kennith Erdman: (805) 601-7081
501 Union Street
Nashville, TN 37201

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

LiftWorks USA
501 Union Street

Nashville, TN 37201

(805) 601-7081

California, 92324

2015 Bendi B40/48IC-180D

LiftWorks USA

Used

PRICE: $18,950 USD

Get Quote

Download Specs

DETAILS

CONTACT

FINANCE

STK#:: SKU:7529102As-Is
MAKE:: Bendi
MODEL:: B40/48IC-180D
MAST - RAISED:: 258 in
FUEL:: Electric
HOURS:: 8650 Hrs
Unit Location:: California

LiftWorks USA
Kennith Erdman: (805) 601-7081
501 Union Street
Nashville, TN 37201

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

LiftWorks USA
501 Union Street

Nashville, TN 37201

(805) 601-7081

California, 92324

2015 Bendi B40/48IC-180D

LiftWorks USA

Used

PRICE: $33,950 USD

Get Quote

Download Specs

DETAILS

CONTACT

FINANCE

STK#:: SKU:7529102
MAKE:: Bendi
MODEL:: B40/48IC-180D
MAST - RAISED:: 258 in
FUEL:: Electric
HOURS:: 8650 Hrs
Unit Location:: California

LiftWorks USA
Kennith Erdman: (805) 601-7081
501 Union Street
Nashville, TN 37201

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

LiftWorks USA
501 Union Street

Nashville, TN 37201

(805) 601-7081

California, 92324

2019 Bendi B30AC

LiftWorks USA

Used

PRICE: $73,950 USD

Get Quote

Download Specs

DETAILS

CONTACT

FINANCE

STK#:: SKU:7722502As-Is
MAKE:: Bendi
MODEL:: B30AC
MAST - RAISED:: 312 in
FUEL:: Electric
HOURS:: 4500 Hrs
CAPACITY:: 3000 lbs
Unit Location:: California

LiftWorks USA
Kennith Erdman: (805) 601-7081
501 Union Street
Nashville, TN 37201

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

LiftWorks USA
501 Union Street

Nashville, TN 37201

(805) 601-7081

California, 92324

2019 Bendi B30AC

LiftWorks USA

Used

PRICE: $78,950 USD

Get Quote

Download Specs

DETAILS

CONTACT

FINANCE

STK#:: SKU:7722502
MAKE:: Bendi
MODEL:: B30AC
MAST - RAISED:: 312 in
FUEL:: Electric
HOURS:: 4500 Hrs
CAPACITY:: 3000 lbs
Unit Location:: California

LiftWorks USA
Kennith Erdman: (805) 601-7081
501 Union Street
Nashville, TN 37201

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

LiftWorks USA
501 Union Street

Nashville, TN 37201

(805) 601-7081

California, 92324

2007 Bendi B40E180D

LiftWorks USA

Used

PRICE: $28,950 USD

Get Quote

Download Specs

DETAILS

CONTACT

FINANCE

STK#:: SKU:7523603
MAKE:: Bendi
MODEL:: B40E180D
MAST - RAISED:: 216 in
FUEL:: Electric
HOURS:: 5800 Hrs
CAPACITY:: 4000 lbs
Unit Location:: California

LiftWorks USA
Kennith Erdman: (805) 601-7081
501 Union Street
Nashville, TN 37201

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

LiftWorks USA
501 Union Street

Nashville, TN 37201

(805) 601-7081

California, 92324

2019 Aisle-Master 33SE

Refurbished Lifts

Used

PRICE: $79,950 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: (#709873)
MAKE:: Aisle-Master
MODEL:: 33SE
MAST TYPE:: Three Stage
MAST - RAISED:: 311 in
FUEL:: Electric
HOURS:: 968 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3300 lbs
Unit Location:: California

Manufacturer: Aisle-Master
Model Number: 33SE
Type: Forklift
Subtype: Multi Directional IC & Electric Sideloading
Fuel Type Used: fuelstartElectricfuelend

Engine:
- Engine Type: Dual power system (IC and Electric)

Dimensions:
- Overall Length: Approximately 107 inches
- Overall Width: Approximately 49 inches
- Overall Height: Approximately 95 inches
- Wheelbase: Approximately 71 inches

Weight:
- Unladen Weight: Approximately 12,125 lbs

Performance:
- Lift Capacity: Approximately 6,600 lbs
- Travel Speed (laden): Approximately 8 mph
- Travel Speed (unladen): Approximately 8.5 mph
- Gradeability (laden): Approximately 15%
- Gradeability (unladen): Approximately 25%

Wheels:
- Wheel Type: Pneumatic or cushion (varies with configuration)

Refurbished Lifts
Jeff Croft : 909-552-8773
675 S Lincoln Av
San Bernardino, CA 92408

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

Refurbished Lifts
675 S Lincoln Av

San Bernardino, CA 92408

909-552-8773

San Bernardino, California 92408

2019 Bendi B40/48i5180D

Miller Equipment Co.

Used

PRICE: $24,850 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

WARRANTY

CONTACT

STK#:: MEC 8523
MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Three Stage
MAST - RAISED:: 198 in
FUEL:: LP Gas
HOURS:: 5523 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Texas

Bendi Narrow Aisle Articulated Forklift LP Gas Powered

30 Day Powertrain Warranty

Miller Equipment Co.
Foster Miller: 469-423-8022
1000 N First St
Garland, TX 75040

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

Miller Equipment Co.
1000 N First St

Garland, TX 75040

469-423-8022

Garland, Texas 75040

2020 Bendi B40/48i5180D

National Lift Equipment

Used

PRICE: $24,785 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 151175
MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Three Stage
MAST - RAISED:: 198 in
FUEL:: LP Gas
HOURS:: 5590 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Pennsylvania

Model Number: B40/48I5-180D
Manufacturer: Bendi
Type: Forklift
Fuel Type: LP Gas

Dimensions and Weight

Overall Length: Approximately 125 inches
Overall Width: Approximately 48 inches
Wheelbase: Approximately 70 inches
Fork Length: Varies
Ground Clearance: Approximately 3 inches
Weight: Around 8,000 lbs (varies by configuration)

Performance

Load Capacity: 4,000 - 5,000 lbs
Travel Speed: Up to 9 mph
Lift Speed: Approximately 65 feet per minute
Lowering Speed: Approximately 90 feet per minute

Tire Specifications

Tire Type: Cushion
Front Tires: 18 x 6 x 12.1 inches
Rear Tires: 15 x 4 x 8 inches

Engine and Transmission

Engine Type: Internal Combustion Engine
Fuel: LP Gas
Transmission Type: Hydrostatic Drive

Additional Features

Advanced Ergonomics for Operator Comfort
Electronic Directional and Speed Controls
360-degree Visibility
Pneumatic Suspension Seat

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

National Lift Equipment
300 Pond St.

Bristol, PA 19007

(215) 544-2708

Bristol, Pennsylvania 19007

2019 Bendi B40/48i5180D

Bulldog Forklifts

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

CONTACT

STK#:: londollbendi-b40-48i5-180d
MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Three Stage
MAST - RAISED:: 204 in
FUEL:: LP Gas
HOURS:: 7310 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Texas

Bulldog Forklifts
Thomas Velez: 972-457-0101
3501 E. Jefferson St
Grand Prairie, TX 75051

Bulldog Forklifts
3501 E. Jefferson St

Grand Prairie, TX 75051

972-457-0101

Grand Prairie, Texas 75051

2019 Bendi B40/48i5180D

Bulldog Forklifts

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

CONTACT

STK#:: londollbendi-b40-48i5-180d
MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Three Stage
MAST - RAISED:: 204 in
FUEL:: LP Gas
HOURS:: 7310 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Texas

Bulldog Forklifts
Thomas Velez: 972-457-0101
3501 E. Jefferson St
Grand Prairie, TX 75051

Bulldog Forklifts
3501 E. Jefferson St

Grand Prairie, TX 75051

972-457-0101

Grand Prairie, Texas 75051

2019 Bendi B40/48i5180D

Bulldog Forklifts

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

CONTACT

STK#:: londollbendi-b40-48i5-180d
MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Three Stage
MAST - RAISED:: 204 in
FUEL:: LP Gas
HOURS:: 7310 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Texas

Bulldog Forklifts
Thomas Velez: 972-457-0101
3501 E. Jefferson St
Grand Prairie, TX 75051

Bulldog Forklifts
3501 E. Jefferson St

Grand Prairie, TX 75051

972-457-0101

Grand Prairie, Texas 75051

2016 Bendi B40/48i5180D

National Lift Equipment

Used

PRICE: $24,785 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 151329
MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Quad Mast
MAST - RAISED:: 250 in
FUEL:: LP Gas
HOURS:: 1430 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Pennsylvania

Model Number: B40/48I5-180D
Manufacturer: Bendi
Type: Forklift
Fuel Type: LP Gas

Dimensions and Weight

Overall Length: Approximately 125 inches
Overall Width: Approximately 48 inches
Wheelbase: Approximately 70 inches
Fork Length: Varies
Ground Clearance: Approximately 3 inches
Weight: Around 8,000 lbs (varies by configuration)

Performance

Load Capacity: 4,000 - 5,000 lbs
Travel Speed: Up to 9 mph
Lift Speed: Approximately 65 feet per minute
Lowering Speed: Approximately 90 feet per minute

Tire Specifications

Tire Type: Cushion
Front Tires: 18 x 6 x 12.1 inches
Rear Tires: 15 x 4 x 8 inches

Engine and Transmission

Engine Type: Internal Combustion Engine
Fuel: LP Gas
Transmission Type: Hydrostatic Drive

Additional Features

Advanced Ergonomics for Operator Comfort
Electronic Directional and Speed Controls
360-degree Visibility
Pneumatic Suspension Seat

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

National Lift Equipment
300 Pond St.

Bristol, PA 19007

(215) 544-2708

Bristol, Pennsylvania 19007

2017 Bendi B30/42AC 180D

National Lift Equipment

Used

PRICE: $19,875 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 151612
MAKE:: Bendi
MODEL:: B30/42AC 180D
MAST TYPE:: Quad Mast
MAST - RAISED:: 250 in
FUEL:: Electric
HOURS:: 6490 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: Pennsylvania

General Specifications
- Manufacturer: Bendi
- Model Number: B30/42AC-180D
- Type: Forklift
- Subtype: Multi Directional IC & Electric Sideloading
- Fuel Type: Fuel and Electric
Dimensions
- Overall Length: 107 inches
- Overall Width: 51 inches
- Wheelbase: 74 inches
- Ground Clearance: 3.5 inches
Weight
- Service Weight: 9,920 lbs
Performance
- Power Output: 30 HP
- Load Capacity: 4,200 lbs
- Travel Speed: 7 mph
- Turning Radius: 83 inches
Tires
- Type: Pneumatic
- Tire Size Front: 21 inches
- Tire Size Rear: 16 inches
Forks
- Fork Length: Varies
Engine
- Engine Type: Diesel/Electric Hybrid
- Engine Manufacturer: Specific Manufacturer for Diesel Components

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

National Lift Equipment
300 Pond St.

Bristol, PA 19007

(215) 544-2708

Bristol, Pennsylvania 19007

2007 Aisle-Master 44S

Premium Equipment Company Inc.

Used

PRICE: $19,900 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

STK#:: 50932
MAKE:: Aisle-Master
MODEL:: 44S
MAST TYPE:: Three Stage
MAST - RAISED:: 278 in
FUEL:: LP Gas
HOURS:: 2144 Hrs
CAPACITY:: 4400 lbs
Unit Location:: California

Manufacturer: Aisle-Master
Model Number: 44S
Type: Forklift
Subtype: Multi Directional IC & Electric Sideloading
Fuel Type: LP Gas

Powertrain
- Engine Type: Internal Combustion
- Fuel System: Liquid Propane (LP Gas)
Dimensions
- Overall Length: Approximately 156 inches
- Width: Approximately 51 inches
- Height to Top of Overhead Guard: Approximately 87 inches
- Wheelbase: Approximately 80 inches
- Ground Clearance: Approximately 5 inches
Performance
- Turning Radius: Approximately 82 inches
- Load Capacity: Approximately 4,400 lbs
- Travel Speed (Loaded/Unloaded): Approximately 12 mph / 14 mph
- Gradeability (Loaded/Unloaded): Approximately 15% / 20%
Tires
- Type: Solid or Pneumatic
- Tire Size Front: Approximately 18 x 7 inches
- Tire Size Rear: Approximately 16 x 6 inches
Operational Details
- Control System: Multi-Directional Steering
- Hydraulic System Pressure: Approximately 1,750 psi
- Brake Type: Hydraulic
Forks
- Fork Length: Varies
- Fork Width: Approximately 4 inches
- Fork Thickness: Approximately 1.5 inches