1 Used Bendi b3b30ac200s Equipment for Sale

2012 Bendi B40IC

Johns Lift Repair and Service Inc.

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 951559
MAKE:: Bendi
MODEL:: B40IC
MAST TYPE:: Quad Mast
MAST - RAISED:: 258 in
FUEL:: LP Gas
HOURS:: 3222 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: California

258" QUAD BENDI TURRET LPG

General Information
- Model Number: B40-IC
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Electric Man Down Swing Reach Turret
Engine & Power
- Fuel Type: LP Gas
Performance
- Load Capacity: Typically around 4,000 lbs
- Travel Speed: Approximately 6-8 mph unladen
Dimensions
- Overall Length: Typically varies
- Overall Width: Typically around 48-50 inches
Carriage & Forks
- Fork Length: Varies
Chassis & Steering
- Tire Type: Cushion Tires
- Steering Type: Rear Wheel Stand-On
Operator
- Operator Position: Man Down
- Control Type: Sit/Stand
Safety & Features
- Safety Features: Includes standard safety features typical to electric forklifts, such as operator presence sensing, anti-rollback, etc.

Johns Lift Repair and Service Inc.
Sako Krikorian : 323 721 1477
546 S Greenwood Ave
Montebello, CA 90640

SEE SIMILAR UNITS MORE FROM SELLER

Johns Lift Repair and Service Inc.
546 S Greenwood Ave

Montebello, CA 90640

323 721 1477

Montebello, California 90640

2019 Bendi B30AC

Big Joe Handling Systems

Used

PRICE: $72,400 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 123199
MAKE:: Bendi
MODEL:: B30AC
MAST TYPE:: Quad Mast
MAST - LOWERED:: 107 in
MAST - RAISED:: 312 in
FUEL:: Electric
HOURS:: 5829 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

General Specifications
- Model Number: B30AC
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Electric Narrow Aisle Single Reach
Power Source
- Power Type: Electric
- Battery Voltage: 48 volts
Capacity
- Load Capacity: 3,000 lbs
Dimensions
- Aisle Width for 90° Stack: Approx. 7.66 ft
- Overall Length: Varies (depending on options)
- Overall Height: Approx. 7.5 ft
- Overall Width: Approx. 3.5 ft
Performance
- Travel Speed: Approx. 6 mph
- Lift Speed: Approx. 50 ft/min
- Lowering Speed: Approx. 90 ft/min
Tires
- Tire Type: Cushion
- Front/Drive: Dual
- Rear/Steer: Single
Forks
- Fork Length: Varies
Additional Features
- 360° Pivot Steer
- AC Drive Motor
- Ergonomic Controls

Big Joe Handling Systems
Sales Dept: 510-617-1990
25932 Eden Landing Rd
Hayward, CA 94545

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

Big Joe Handling Systems
25932 Eden Landing Rd

Hayward, CA 94545

510-617-1990

Hayward, California 94545

2016 Bendi B30AC

National Lift Equipment

Used

PRICE: $27,950 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 149551
MAKE:: Bendi
MODEL:: B30AC
FUEL:: Electric
HOURS:: 5598 Hrs
SIDESHIFTER:: YES
Unit Location:: Pennsylvania

General Specifications
- Model Number: B30AC
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Electric Narrow Aisle Single Reach
Power Source
- Power Type: Electric
- Battery Voltage: 48 volts
Capacity
- Load Capacity: 3,000 lbs
Dimensions
- Aisle Width for 90° Stack: Approx. 7.66 ft
- Overall Length: Varies (depending on options)
- Overall Height: Approx. 7.5 ft
- Overall Width: Approx. 3.5 ft
Performance
- Travel Speed: Approx. 6 mph
- Lift Speed: Approx. 50 ft/min
- Lowering Speed: Approx. 90 ft/min
Tires
- Tire Type: Cushion
- Front/Drive: Dual
- Rear/Steer: Single
Forks
- Fork Length: Varies
Additional Features
- 360° Pivot Steer
- AC Drive Motor
- Ergonomic Controls

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

National Lift Equipment
300 Pond St.

Bristol, PA 19007

(215) 544-2708

Bristol, Pennsylvania 19007

2019 Bendi B40/48AC/CE180D

Material Solutions INC

Used

PRICE: $64,330 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

WARRANTY

CONTACT

STK#:: INV-853
MAKE:: Bendi
MODEL:: B40/48AC/CE180D
MAST TYPE:: Quad Mast
MAST - LOWERED:: 92 in
MAST - RAISED:: 276 in
FUEL:: Electric
HOURS:: 8462 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: New Jersey

LIKE NEW!

Model Number: B40/48AC/CE180D
Manufacturer: Bendi
Type: Forklift
Subtype: Electric Man Down Swing Reach Turret
Fuel Type Used: Electric
Capacity: 4,000 lbs
Operating Weight: Approximately 8,000 lbs
Drive Motor: 48V / 4.0 kW
Lifting Motor: 48V / 3.0 kW
Battery: 48V / 380Ah
Charger: 48V / 15-20A Automatic Charger
Travel Speed: Up to 5.5 mph
Lifting Speed: Up to 43 ft/min
Turning Radius: Approximately 83 inches
Height: 83 inches
Length: Varies
Width: Approximately 42 inches
Fork Length: Varies
Class: IV - Electric Forklift
Control Type: Electronic Control System
Features:
- Compact Design
- Enhanced Maneuverability
- Ergonomic Operator's Compartment
- Safety Features Including Seat Belt and Overhead Guard
- Ability to Reach Maximum Warehouse Efficiency

90 days entire unit, 6 month major parts, 1 year on battery and charger

Material Solutions INC
Joe Depinto: 609-400-4542
28C Industrial Drive
Hamilton, NJ 08619

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

Material Solutions INC
28C Industrial Drive

Hamilton, NJ 08619

609-400-4542

Hamilton, New Jersey 08619

2019 Bendi B40/48AC/CE180D

Material Solutions INC

Used

PRICE: $65,000 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

WARRANTY

CONTACT

STK#:: INV-853
MAKE:: Bendi
MODEL:: B40/48AC/CE180D
MAST TYPE:: Quad Mast
MAST - LOWERED:: 92 in
MAST - RAISED:: 276 in
FUEL:: Electric
HOURS:: 8900 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: New Jersey

THIS UNIT IS REFURBISHED, READY TO SHIP TODAY.

Model Number: B40/48AC/CE180D
Manufacturer: Bendi
Type: Forklift
Subtype: Electric Man Down Swing Reach Turret
Fuel Type Used: Electric
Capacity: 4,000 lbs
Operating Weight: Approximately 8,000 lbs
Drive Motor: 48V / 4.0 kW
Lifting Motor: 48V / 3.0 kW
Battery: 48V / 380Ah
Charger: 48V / 15-20A Automatic Charger
Travel Speed: Up to 5.5 mph
Lifting Speed: Up to 43 ft/min
Turning Radius: Approximately 83 inches
Height: 83 inches
Length: Varies
Width: Approximately 42 inches
Fork Length: Varies
Class: IV - Electric Forklift
Control Type: Electronic Control System
Features:
- Compact Design
- Enhanced Maneuverability
- Ergonomic Operator's Compartment
- Safety Features Including Seat Belt and Overhead Guard
- Ability to Reach Maximum Warehouse Efficiency

90 days entire unit, 6 month major parts, 1 year on battery and charger

Material Solutions INC
Joe Depinto: 609-400-4542
28C Industrial Drive
Hamilton, NJ 08619

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

Material Solutions INC
28C Industrial Drive

Hamilton, NJ 08619

609-400-4542

Hamilton, New Jersey 08619

2021 Bendi B40i

G&W Equipment Inc.

Featured

PRICE: $54,900 USD

Get Quote

Download Specs

DETAILS

SPECS

WARRANTY

CONTACT

STK#:: G27532
MAKE:: Bendi
MODEL:: B40i
MAST TYPE:: Quad Mast
MAST - LOWERED:: 89 in
MAST - RAISED:: 258 in
FUEL:: LP Gas
HOURS:: 1787 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: South Carolina

Model Number: B40I
Manufacturer: Bendi
Type: Forklift
Subtype: Man Down 3 & 4 Wheel SwingMast Gas/Electric
Fuel Type Used: LP Gas
Driving Configuration: 3 Wheel / 4 Wheel
Power Source: Internal Combustion Engine / Electric Motor
Load Capacity: Varies
Weight: Varies
Overall Length: Varies
Overall Width: Varies
Overall Height: Varies
Turning Radius: Varies
Travel Speed: Varies
Service Brake: Hydraulic Disc Brake

45 Days Full / 6 Months Powertrain

Charleston Branch
Edward Tart: 704-314-5104
9040 Palmetto Commerce Pkwy
Charleston, SC 29456

G&W Equipment Inc.
9040 Palmetto Commerce Pkwy

Charleston, SC 29456

704-314-5104

Charleston, SC 29456

2019 Bendi B40/48AC/CE180D

Material Solutions INC

Used

PRICE: $59,950 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

WARRANTY

CONTACT

STK#:: 853
MAKE:: Bendi
MODEL:: B40/48AC/CE180D
MAST TYPE:: Quad Mast
MAST - LOWERED:: 92 in
MAST - RAISED:: 276 in
FUEL:: Electric
HOURS:: 8900 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: New Jersey

Refurbished ready to ship

Model Number: B40/48AC/CE180D
Manufacturer: Bendi
Type: Forklift
Subtype: Electric Man Down Swing Reach Turret
Fuel Type Used: Electric
Capacity: 4,000 lbs
Operating Weight: Approximately 8,000 lbs
Drive Motor: 48V / 4.0 kW
Lifting Motor: 48V / 3.0 kW
Battery: 48V / 380Ah
Charger: 48V / 15-20A Automatic Charger
Travel Speed: Up to 5.5 mph
Lifting Speed: Up to 43 ft/min
Turning Radius: Approximately 83 inches
Height: 83 inches
Length: Varies
Width: Approximately 42 inches
Fork Length: Varies
Class: IV - Electric Forklift
Control Type: Electronic Control System
Features:
- Compact Design
- Enhanced Maneuverability
- Ergonomic Operator's Compartment
- Safety Features Including Seat Belt and Overhead Guard
- Ability to Reach Maximum Warehouse Efficiency

90 days entire unit, 6 month major parts, 1 year on battery and charger

Material Solutions INC
Joe Depinto: 609-400-4542
28C Industrial Drive
Hamilton, NJ 08619

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

Material Solutions INC
28C Industrial Drive

Hamilton, NJ 08619

609-400-4542

Hamilton, New Jersey 08619

2019 Bendi B40/48i5180D

Miller Equipment Co.

Used

PRICE: $24,850 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

WARRANTY

CONTACT

STK#:: MEC 8523
MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Three Stage
MAST - RAISED:: 198 in
FUEL:: LP Gas
HOURS:: 5523 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Texas

Bendi Narrow Aisle Articulated Forklift LP Gas Powered

30 Day Powertrain Warranty

Miller Equipment Co.
Foster Miller: 469-423-8022
1000 N First St
Garland, TX 75040

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

Miller Equipment Co.
1000 N First St

Garland, TX 75040

469-423-8022

Garland, Texas 75040

2026 Bendi B3/30AC-200S

1 Source Material Handling, Inc.

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

STK#:: N26251001
MAKE:: Bendi
MODEL:: B3/30AC-200S
MAST TYPE:: Three Stage
MAST - LOWERED:: 118 in
MAST - RAISED:: 222 in
FUEL:: Electric
HOURS:: 0 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

Manufacturer: Bendi
Model Number: B3/30AC-200S

Type: Forklift
Subtype: Man Down 3 & 4 Wheel SwingMast Gas/Electric
Fuel Type: Electric

Dimensions
- Overall Length: 148 inches
- Overall Width: 42 inches
- Overall Height: 86 inches
- Wheelbase: 82 inches
- Ground Clearance: 3 inches
Capacity
- Load Capacity: 3,000 lbs
Performance
- Travel Speed (Unloaded): 9 mph
- Travel Speed (Loaded): 7 mph
- Lift Speed (Unloaded): 78 feet/min
- Lift Speed (Loaded): 64 feet/min
- Gradeability (Loaded): 10%
Weight
- Truck Weight: 9,065 lbs
Forks
- Fork Length: Varies
Power System
- Battery Voltage: 48 volts
- Electric Motor: AC

1 Source Material Handling, Inc.
Sales Dept: 1 818 593 0020
15519 Arrow Highway
Irwindale, CA 91706

1 Source Material Handling, Inc.
15519 Arrow Highway

Irwindale, CA 91706

1 818 593 0020

Irwindale, California 91706

2019 Bendi B40/48i5180D

Supreme Forklift & Equipment

Used

PRICE: $28,995 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Three Stage
MAST - RAISED:: 198 in
FUEL:: LP Gas
HOURS:: 5607 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Arizona

FINANCING AVAILABLE

Model Number: B40/48I5-180D
Manufacturer: Bendi
Type: Forklift
Fuel Type: LP Gas

Dimensions and Weight

Overall Length: Approximately 125 inches
Overall Width: Approximately 48 inches
Wheelbase: Approximately 70 inches
Fork Length: Varies
Ground Clearance: Approximately 3 inches
Weight: Around 8,000 lbs (varies by configuration)

Performance

Load Capacity: 4,000 - 5,000 lbs
Travel Speed: Up to 9 mph
Lift Speed: Approximately 65 feet per minute
Lowering Speed: Approximately 90 feet per minute

Tire Specifications

Tire Type: Cushion
Front Tires: 18 x 6 x 12.1 inches
Rear Tires: 15 x 4 x 8 inches

Engine and Transmission

Engine Type: Internal Combustion Engine
Fuel: LP Gas
Transmission Type: Hydrostatic Drive

Additional Features

Advanced Ergonomics for Operator Comfort
Electronic Directional and Speed Controls
360-degree Visibility
Pneumatic Suspension Seat

Supreme Forklift & Equipment
Sales Dept.: 480-660-4508
25250 S Power Rd
Queen Creek, AZ 85142

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

Supreme Forklift & Equipment
25250 S Power Rd

Queen Creek, AZ 85142

480-660-4508

Queen Creek, Arizona 85142

2020 Bendi B40/48i5180D

National Lift Equipment

Used

PRICE: $24,785 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 151175
MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Three Stage
MAST - RAISED:: 198 in
FUEL:: LP Gas
HOURS:: 5590 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Pennsylvania

Model Number: B40/48I5-180D
Manufacturer: Bendi
Type: Forklift
Fuel Type: LP Gas

Dimensions and Weight

Overall Length: Approximately 125 inches
Overall Width: Approximately 48 inches
Wheelbase: Approximately 70 inches
Fork Length: Varies
Ground Clearance: Approximately 3 inches
Weight: Around 8,000 lbs (varies by configuration)

Performance

Load Capacity: 4,000 - 5,000 lbs
Travel Speed: Up to 9 mph
Lift Speed: Approximately 65 feet per minute
Lowering Speed: Approximately 90 feet per minute

Tire Specifications

Tire Type: Cushion
Front Tires: 18 x 6 x 12.1 inches
Rear Tires: 15 x 4 x 8 inches

Engine and Transmission

Engine Type: Internal Combustion Engine
Fuel: LP Gas
Transmission Type: Hydrostatic Drive

Additional Features

Advanced Ergonomics for Operator Comfort
Electronic Directional and Speed Controls
360-degree Visibility
Pneumatic Suspension Seat

National Lift Equipment
Sales: (215) 544-2708
300 Pond St.
Bristol, PA 19007

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

National Lift Equipment
300 Pond St.

Bristol, PA 19007

(215) 544-2708

Bristol, Pennsylvania 19007

2015 Bendi B40

GAF Equipment Inc. - Hialeah

Used

PRICE: $23,900 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Bendi
MODEL:: B40
MAST TYPE:: Three Stage
MAST - LOWERED:: 83 in
MAST - RAISED:: 250 in
FUEL:: LP Gas
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Florida

low hour unit

Manufacturer: Bendi
Model Number: B40
Type: Forklift
Subtype: Man Down 3 & 4 Wheel SwingMast Gas/Electric

General Specifications:
- Drive: Gas/Electric
- Operator Position: Man Down
- Wheel Configuration: 3 & 4 Wheel
Dimensions:
- Overall Length: Approximately 145 inches
- Overall Width: Approximately 46 inches
- Ground Clearance: Approximately 3.9 inches
Performance:
- Load Capacity: 4,000 lbs
- Travel Speed: Approximately 7.5 mph
- Turning Radius: Approximately 72 inches
Forks:
- Fork Length: Varies
Power:
- Engine Type: Dual Fuel (Gas/Electric)
- Battery Voltage: Available in 48V for electric option
Chassis:
- Weight (without load): Approximately 10,500 lbs

GAF Equipment Inc. - Hialeah
Gary Foster: 786-507-5424
8085 West 26th Court
Hialeah, FL 33016

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

GAF Equipment Inc. - Hialeah
8085 West 26th Court

Hialeah, FL 33016

786-507-5424

Hialeah, Florida 33016

2019 Bendi B40/48i5180D

Bulldog Forklifts

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

CONTACT

STK#:: londollbendi-b40-48i5-180d
MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Three Stage
MAST - RAISED:: 204 in
FUEL:: LP Gas
HOURS:: 7310 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Texas

Bulldog Forklifts
Thomas Velez: 972-457-0101
3501 E. Jefferson St
Grand Prairie, TX 75051

Bulldog Forklifts
3501 E. Jefferson St

Grand Prairie, TX 75051

972-457-0101

Grand Prairie, Texas 75051

2019 Bendi B40/48i5180D

Bulldog Forklifts

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

CONTACT

STK#:: londollbendi-b40-48i5-180d
MAKE:: Bendi
MODEL:: B40/48i5180D
MAST TYPE:: Three Stage
MAST - RAISED:: 204 in
FUEL:: LP Gas
HOURS:: 7310 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Texas

Bulldog Forklifts
Thomas Velez: 972-457-0101
3501 E. Jefferson St
Grand Prairie, TX 75051

Bulldog Forklifts
3501 E. Jefferson St

Grand Prairie, TX 75051

972-457-0101

Grand Prairie, Texas 75051

2011 Bendi B35E

Patterson Lift Trucks Inc

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: R1155
MAKE:: Bendi
MODEL:: B35E
MAST TYPE:: Quad Mast
MAST - RAISED:: 240 in
FUEL:: Electric
HOURS:: 5072 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3500 lbs
Unit Location:: California

SOLD AS IS.

General Information
- Model Number: B35E
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Articulated 4 Wheel Sitdown
- Fuel Type: Gas/Electric
Performance
- Power Source: fuelstartElectricfuelend
- Load Capacity: 3,500 lbs
- Drive: 4 Wheel
- Travel Speed: Approximately 8-10 mph (unloaded)
Dimensions
- Overall Length: Approximately 124 inches
- Overall Width: Approximately 44 inches
- Height to Top of Overhead Guard: Approximately 88 inches
- Minimum Aisle Width: Approximately 78 inches
Forks
- Fork Length: Varies
Chassis
- Steering System: Articulated, power steering
- Brakes: Hydraulic
Tires
- Tire Type: Cushion
- Tire Size - Front: 18 x 7 x 12.1 inches
- Tire Size - Rear: 15 x 5 x 11.5 inches
Electrical System
- Battery Voltage: 48V
- Battery Capacity: Depending on configuration
- Charger: External or built-in options available

Patterson Lift Trucks Inc
Jake Patterson: (510) 466-1071
975 Industrial Parkway
West Hayward, CA 94544

Patterson Lift Trucks Inc
975 Industrial Parkway

West Hayward, CA 94544

(510) 466-1071

West Hayward, California 94544

2011 Bendi B40

Select Equipment Sales

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: U191120
MAKE:: Bendi
MODEL:: B40
MAST TYPE:: Three Stage
MAST - RAISED:: 198 in
FUEL:: LP Gas
HOURS:: 6000 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: California

Low Hours, Rental Ready, Side Shift, Contact for Pricing

Manufacturer: Bendi
Model Number: B40
Type: Forklift
Subtype: Man Down 3 & 4 Wheel SwingMast Gas/Electric

General Specifications:
- Drive: Gas/Electric
- Operator Position: Man Down
- Wheel Configuration: 3 & 4 Wheel
Dimensions:
- Overall Length: Approximately 145 inches
- Overall Width: Approximately 46 inches
- Ground Clearance: Approximately 3.9 inches
Performance:
- Load Capacity: 4,000 lbs
- Travel Speed: Approximately 7.5 mph
- Turning Radius: Approximately 72 inches
Forks:
- Fork Length: Varies
Power:
- Engine Type: Dual Fuel (Gas/Electric)
- Battery Voltage: Available in 48V for electric option
Chassis:
- Weight (without load): Approximately 10,500 lbs

Select Equipment Sales
Sales Dept.: 657-212-2302
6911 8th St
Buena Park, CA 90620

Select Equipment Sales
6911 8th St

Buena Park, CA 90620

657-212-2302

Buena Park, California 90620

Bendi B40 IC

Worldwide Wholesale Forklifts, Inc

Used

PRICE: $24,900 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 21339
MAKE:: Bendi
MODEL:: B40 IC
MAST TYPE:: Three Stage
MAST - LOWERED:: 89 in
MAST - RAISED:: 258 in
FUEL:: LP Gas
HOURS:: 1628 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Florida

Bendi Narrow aisle articulating forklift with Quad mast

General Information
- Model Number: B40-IC
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Electric Man Down Swing Reach Turret
Engine & Power
- Fuel Type: LP Gas
Performance
- Load Capacity: Typically around 4,000 lbs
- Travel Speed: Approximately 6-8 mph unladen
Dimensions
- Overall Length: Typically varies
- Overall Width: Typically around 48-50 inches
Carriage & Forks
- Fork Length: Varies
Chassis & Steering
- Tire Type: Cushion Tires
- Steering Type: Rear Wheel Stand-On
Operator
- Operator Position: Man Down
- Control Type: Sit/Stand
Safety & Features
- Safety Features: Includes standard safety features typical to electric forklifts, such as operator presence sensing, anti-rollback, etc.

Worldwide Wholesale Forklifts, Inc
Paul Vaz: 954-719-4227
268 SW 32nd Ct
Ft Lauderdale, FL 33315

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

Worldwide Wholesale Forklifts, Inc
268 SW 32nd Ct

Ft Lauderdale, FL 33315

954-719-4227

Ft Lauderdale, Florida 33315

2021 Bendi B30AC

Select Equipment Sales

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: N190711
MAKE:: Bendi
MODEL:: B30AC
MAST TYPE:: Quad Mast
MAST - LOWERED:: 89 in
MAST - RAISED:: 258 in
FUEL:: Electric
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

New Inventory, In Stock, Hundreds to Choose From!

General Specifications
- Model Number: B30AC
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Electric Narrow Aisle Single Reach
Power Source
- Power Type: Electric
- Battery Voltage: 48 volts
Capacity
- Load Capacity: 3,000 lbs
Dimensions
- Aisle Width for 90° Stack: Approx. 7.66 ft
- Overall Length: Varies (depending on options)
- Overall Height: Approx. 7.5 ft
- Overall Width: Approx. 3.5 ft
Performance
- Travel Speed: Approx. 6 mph
- Lift Speed: Approx. 50 ft/min
- Lowering Speed: Approx. 90 ft/min
Tires
- Tire Type: Cushion
- Front/Drive: Dual
- Rear/Steer: Single
Forks
- Fork Length: Varies
Additional Features
- 360° Pivot Steer
- AC Drive Motor
- Ergonomic Controls

Select Equipment Sales
Sales Dept.: 657-212-2302
6911 8th St
Buena Park, CA 90620

Select Equipment Sales
6911 8th St

Buena Park, CA 90620

657-212-2302

Buena Park, California 90620

2015 Bendi B30AC

Select Equipment Sales

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

MAKE:: Bendi
MODEL:: B30AC
MAST TYPE:: Three Stage
MAST - LOWERED:: 89 in
MAST - RAISED:: 198 in
FUEL:: Electric
HOURS:: 5591 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

Triple 89/198 Mast, S/S-FP, 5591 Hours

General Specifications
- Model Number: B30AC
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Electric Narrow Aisle Single Reach
Power Source
- Power Type: Electric
- Battery Voltage: 48 volts
Capacity
- Load Capacity: 3,000 lbs
Dimensions
- Aisle Width for 90° Stack: Approx. 7.66 ft
- Overall Length: Varies (depending on options)
- Overall Height: Approx. 7.5 ft
- Overall Width: Approx. 3.5 ft
Performance
- Travel Speed: Approx. 6 mph
- Lift Speed: Approx. 50 ft/min
- Lowering Speed: Approx. 90 ft/min
Tires
- Tire Type: Cushion
- Front/Drive: Dual
- Rear/Steer: Single
Forks
- Fork Length: Varies
Additional Features
- 360° Pivot Steer
- AC Drive Motor
- Ergonomic Controls

Select Equipment Sales
Sales Dept.: 657-212-2302
6911 8th St
Buena Park, CA 90620

Select Equipment Sales
6911 8th St

Buena Park, CA 90620

657-212-2302

Buena Park, California 90620

2015 Bendi B30/42AC

Big Joe Handling Systems

Used

PRICE: $65,000 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 2807
MAKE:: Bendi
MODEL:: B30/42AC
MAST TYPE:: Quad Mast
MAST - LOWERED:: 89 in
MAST - RAISED:: 258 in
FUEL:: Electric
HOURS:: 3103 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

Model Number: B30-42AC
Manufacturer: Bendi
Type: Forklift
Subtype: Man Down 3 & 4 Wheel SwingMast Gas/Electric
Fuel Type Used: Gas/Electric

Dimensions

Overall Length: Approximately 98 inches
Overall Width: Approximately 48 inches
Wheelbase: Approximately 71 inches
Ground Clearance: Approximately 3.5 inches
Overhead Guard Height: Approximately 84 inches
Turning Radius: Approximately 95 inches

Capacity

Load Capacity: Approximately 6,000 to 9,259 lbs

Performance

Travel Speed: Approximately 8.5 mph
Lift Speed: Approximately 93 feet per minute
Lowering Speed: Approximately 95 feet per minute

Powertrain

Drive Motor: AC Electric Motor
Lift Motor: AC Electric Motor
Steering: Electric Power Steering

Tires

Tire Type: Pneumatic or solid
Front Tires: Varies by configuration
Rear Tires: Varies by configuration

Brakes

Service Brake: Hydraulic
Parking Brake: Mechanical/Hydraulic

Big Joe Handling Systems
Sales Dept: 510-617-1990
25932 Eden Landing Rd
Hayward, CA 94545

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

Big Joe Handling Systems
25932 Eden Landing Rd

Hayward, CA 94545

510-617-1990

Hayward, California 94545

2015 Bendi B40AC

Big Joe Handling Systems

Used

PRICE: $42,500 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 10782
MAKE:: Bendi
MODEL:: B40AC
MAST TYPE:: Quad Mast
MAST - LOWERED:: 89 in
MAST - RAISED:: 258 in
FUEL:: Electric
HOURS:: 3706 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: California

Bendi Vna Ac Forklift Quad Mast Unit - Batt/Chgr Ohg

Model Number: B40-AC
Manufacturer: Bendi
Type: Forklift
Subtype: Articulated 4 Wheel Sitdown - Gas/Electric
Fuel Type: Gas/Electric (fuelstartElectricfuelend)

General Specifications
- Load Capacity: 4,000 lbs
- Power Source: Combination of gas and electric power
- Operator Type: Sitdown
- Number of Wheels: 4

Dimensions
- Overall Length: Approximately 111 inches
- Overall Width: 48 inches
- Overall Height (Cab): 86 inches
- Wheelbase: 67 inches
- Ground Clearance: 4 inches

Performance
- Travel Speed (laden/unladen): 6 mph/8 mph
- Lift Speed (laden/unladen): 59 ft/min
- Gradeability (laden/unladen): 15%/20%

Tires
- Tire Type: Pneumatic
- Tire Size (Front): 18 x 7-8
- Tire Size (Rear): 15 x 5-11

Battery
- Voltage: 48V

Forks
- Fork Length: Varies
- Fork Width: 4.7 inches
- Fork Thickness: 1.8 inches

Big Joe Handling Systems
Sales Dept: 510-617-1990
25932 Eden Landing Rd
Hayward, CA 94545

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

Big Joe Handling Systems
25932 Eden Landing Rd

Hayward, CA 94545

510-617-1990

Hayward, California 94545

2010 Bendi B40/48IC-180D

Material Solutions INC

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: INV-453
MAKE:: Bendi
MODEL:: B40/48IC-180D
MAST TYPE:: Three Stage
MAST - LOWERED:: 89 in
MAST - RAISED:: 198 in
FUEL:: LP Gas
HOURS:: 9234 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: New Jersey

GM ENGINE, GOOD CLEAN MACHINE

Model Number: B40-48IC180D
Manufacturer: Bendi
Type: Forklift
Subtype: Articulated 4 Wheel Sitdown
Fuel Type Used: LP Gas
Power Source: Gas/Electric
Load Capacity: Varies (typically around 4,000 lbs to 8,000 lbs)
Overall Length: Approximately 91 inches
Overall Width: Approximately 42 inches
Overall Height: Approximately 85 inches
Wheelbase: Approximately 64 inches
Turning Radius: Approximately 68 inches
Weight: Approximately 6,500 lbs
Tires: Pneumatic or Solid
Drive System: Hydraulic
Transmission: Automatic
Operator Control: Sitdown, Ergonomic Controls
Lift Mechanism: Hydraulic
Noise Level: Approximately 70 dBA
Fuel Capacity: Approximately 33 lbs of LPG
Service Brake: Hydraulic Disc

Material Solutions INC
Joe Depinto: 609-400-4542
28C Industrial Drive
Hamilton, NJ 08619

Material Solutions INC
28C Industrial Drive

Hamilton, NJ 08619

609-400-4542

Hamilton, New Jersey 08619

2012 Bendi B40/48AC-180D

Premier Lift Equipment

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 16927
MAKE:: Bendi
MODEL:: B40/48AC-180D
MAST TYPE:: Three Stage
MAST - LOWERED:: 87 in
MAST - RAISED:: 198 in
FUEL:: Electric
HOURS:: 4603 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Ontario

42” forks, 48 volt battery and charger

Manufacturer: Bendi
Model Number: B40/48AC-180D
Type: Forklift
Powertrain
- Power Source: Electric
- Motor Type: AC
- Battery Voltage: 48V DC
Capacity
- Load Capacity: Up to 4,800 lbs
Dimensions
- Overall Width: Approximately 48 inches
- Overall Length: Varies
- Turning Radius: Approximately 130 inches
Performance
- Travel Speed: Approximately 6.5 mph (loaded)
Tires
- Tire Type: Solid
Operator Convenience
- Adjustable Steering Column
- Ergonomic Controls
Safety Features
- Seat Belt
- Overhead Guard

Premier Lift Equipment
Kevin Patrick: 905-452-8361
99 West Drive Building H
Brampton, ON L6T 2J6

Premier Lift Equipment
99 West Drive Building H

Brampton, ON L6T 2J6

905-452-8361

Brampton, Ontario L6T 2J6

2013 Bendi B40/48I4180D

Premier Lift Equipment

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 7378
MAKE:: Bendi
MODEL:: B40/48I4180D
MAST TYPE:: Three Stage
MAST - LOWERED:: 95 in
MAST - RAISED:: 216 in
FUEL:: LP Gas
HOURS:: 7344 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Ontario

42" forks, GM engine

General Specifications
- Model Number: B40/48I4-180D
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Articulated 4 Wheel Sitdown
- Fuel Type: LP Gas
Dimensions
- Overall Length: Approximately 98.5 inches
- Overall Width: Approximately 48 inches
- Wheelbase: Approximately 62 inches
- Turning Radius: Approximately 82.5 inches
- Height to Top of Overhead Guard: Approximately 87 inches
Weight
- Approximate Operating Weight: 9,600 lbs
Tires
- Tire Type: Cushion
- Front Tire Size: 18 inches x 7 inches
- Rear Tire Size: 15 inches x 5 inches
Performance
- Load Capacity: 4,000 to 4,800 lbs
- Travel Speed: Approximately 8 mph
- Lift Speed: Approximately 80 feet per minute
Powertrain
- Engine Type: Gas/Electric
- Power Output: Approximately 38 hp
- Transmission: Hydrostatic
Forks
- Fork Length: Varies
- Fork Width: Approximately 4 inches
- Fork Thickness: Approximately 1.5 inches

Premier Lift Equipment
Kevin Patrick: 905-452-8361
99 West Drive Building H
Brampton, ON L6T 2J6

Premier Lift Equipment
99 West Drive Building H

Brampton, ON L6T 2J6

905-452-8361

Brampton, Ontario L6T 2J6

2010 Bendi B40AC

Johns Lift Repair and Service Inc.

Used

PRICE: $39,995 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 29
MAKE:: Bendi
MODEL:: B40AC
MAST TYPE:: Quad Mast
MAST - RAISED:: 294 in
FUEL:: Electric
HOURS:: 10000 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: California

294" Quad Mast Swing Reach Electric!

Model Number: B40-AC
Manufacturer: Bendi
Type: Forklift
Subtype: Articulated 4 Wheel Sitdown - Gas/Electric
Fuel Type: Gas/Electric (fuelstartElectricfuelend)

General Specifications
- Load Capacity: 4,000 lbs
- Power Source: Combination of gas and electric power
- Operator Type: Sitdown
- Number of Wheels: 4

Dimensions
- Overall Length: Approximately 111 inches
- Overall Width: 48 inches
- Overall Height (Cab): 86 inches
- Wheelbase: 67 inches
- Ground Clearance: 4 inches

Performance
- Travel Speed (laden/unladen): 6 mph/8 mph
- Lift Speed (laden/unladen): 59 ft/min
- Gradeability (laden/unladen): 15%/20%

Tires
- Tire Type: Pneumatic
- Tire Size (Front): 18 x 7-8
- Tire Size (Rear): 15 x 5-11

Battery
- Voltage: 48V

Forks
- Fork Length: Varies
- Fork Width: 4.7 inches
- Fork Thickness: 1.8 inches

Johns Lift Repair and Service Inc.
Sako Krikorian : 323 721 1477
546 S Greenwood Ave
Montebello, CA 90640

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

Johns Lift Repair and Service Inc.
546 S Greenwood Ave

Montebello, CA 90640

323 721 1477

Montebello, California 90640

2018 Bendi B40/48IC

Johns Lift Repair and Service Inc.

Used

PRICE: $32,500 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 17
MAKE:: Bendi
MODEL:: B40/48IC
MAST TYPE:: Three Stage
MAST - RAISED:: 195 in
FUEL:: LP Gas
HOURS:: 4502 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: California

2018 Bendi LPG Turret - 195" Triple

Model Number: B40-48IC
Manufacturer: Bendi
Type: Forklift
Fuel Type: LP Gas

Engine:
- Type: Internal Combustion
- Power Source: LP Gas
Dimensions:
- Overall Length: Approximately 11.42 feet
- Overall Width: Approximately 4.17 feet
- Height to Top of Overhead Guard: Approximately 7.38 feet
- Wheelbase: Approximately 6.0 feet
- Ground Clearance: Approximately 0.26 feet
- Fork Length: Varies
Performance:
- Lift Capacity: Up to 4,800 lbs
- Travel Speed: Approximately 8.1 mph
Tire Information:
- Tire Type: Cushion
Operator Area:
- Seat: Adjustable with Suspension
- Steering: Power Steering
Safety Features:
- Overhead Guard
- Emergency Stop Button
- Seat Belt

Johns Lift Repair and Service Inc.
Sako Krikorian : 323 721 1477
546 S Greenwood Ave
Montebello, CA 90640

Finance at $/mo

SEE SIMILAR UNITS

Johns Lift Repair and Service Inc.
546 S Greenwood Ave

Montebello, CA 90640

323 721 1477

Montebello, California 90640

2011 Bendi B30AC

Johns Lift Repair and Service Inc.

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 35
MAKE:: Bendi
MODEL:: B30AC
MAST TYPE:: Two Stage
MAST - LOWERED:: 155 in
MAST - RAISED:: 312 in
FUEL:: Electric
HOURS:: 5094 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

312" 2011 Bendi B30AC - Good Hours with 48V Battery

General Specifications
- Model Number: B30AC
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Electric Narrow Aisle Single Reach
Power Source
- Power Type: Electric
- Battery Voltage: 48 volts
Capacity
- Load Capacity: 3,000 lbs
Dimensions
- Aisle Width for 90° Stack: Approx. 7.66 ft
- Overall Length: Varies (depending on options)
- Overall Height: Approx. 7.5 ft
- Overall Width: Approx. 3.5 ft
Performance
- Travel Speed: Approx. 6 mph
- Lift Speed: Approx. 50 ft/min
- Lowering Speed: Approx. 90 ft/min
Tires
- Tire Type: Cushion
- Front/Drive: Dual
- Rear/Steer: Single
Forks
- Fork Length: Varies
Additional Features
- 360° Pivot Steer
- AC Drive Motor
- Ergonomic Controls

Johns Lift Repair and Service Inc.
Sako Krikorian : 323 721 1477
546 S Greenwood Ave
Montebello, CA 90640

SEE SIMILAR UNITS MORE FROM SELLER

Johns Lift Repair and Service Inc.
546 S Greenwood Ave

Montebello, CA 90640

323 721 1477

Montebello, California 90640

2018 Bendi B3/30AC

Select Equipment Sales

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: U230813
MAKE:: Bendi
MODEL:: B3/30AC
MAST TYPE:: Three Stage
MAST - LOWERED:: 108 in
MAST - RAISED:: 204 in
FUEL:: Electric
HOURS:: 6594 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

Triple 108/204 Mast, S/S, 40" Forks, 6500 Hours

General Information
- Model Number: B3/30AC
- Manufacturer: Bendi
- Type: Forklift
- Subtype: Man Down 3 & 4 Wheel SwingMast Gas/Electric
- Fuel Type: Electric
Dimensions
- Overall Length: 102 inches
- Overall Width: 48 inches
- Height to Top of Overhead Guard: 86 inches
- Wheelbase: 61 inches
- Ground Clearance: 4 inches
Performance
- Capacity: 3,000 lbs
- Travel Speed: 8 mph
- Turning Radius: 72 inches
- Gradeability: 15%
Powertrain
- Drive Motor: AC Electric
- Steering: Electric Power Steering
- Brake Type: Regenerative and Mechanical
Tire and Wheels
- Front Tires: Solid Rubber
- Rear Tires: Solid Rubber
Forks
- Fork Length: Varies
- Adjustable Fork Width: Yes
Operator Features
- Seating: Ergonomic Suspension Seat
- Controls: Fingertip Controls
- Display: Digital Information Display
Safety Features
- Visibility: 360-degree Operator Visibility
- Safety Lights: LED Front and Rear Lights
- Audible Alarm: Backup Alarm

Select Equipment Sales
Sales Dept.: 657-212-2302
6911 8th St
Buena Park, CA 90620

Select Equipment Sales
6911 8th St

Buena Park, CA 90620

657-212-2302

Buena Park, California 90620

2020 Bendi B40/48AC

Select Equipment Sales

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: U240123
MAKE:: Bendi
MODEL:: B40/48AC
MAST TYPE:: Quad Mast
MAST - LOWERED:: 87 in
MAST - RAISED:: 250 in
FUEL:: Electric
HOURS:: 3887 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: California

Quad 87/250 Mast, S/S, 48v Electric, Only 3887 Hours!

Manufacturer: Bendi
Model Number: B40/48AC
Type: Forklift
Subtype: Electric Man Down Swing Reach Turret
Fuel Type: Electric

Power Source
- Electric Motor
- Battery Voltage: 48V
Performance
- Load Capacity: 4,000 lbs
- Travel Speed: Approximately 6 - 7 mph
- Lift Speed: Varies with load
- Gradeability: varies depending on load
Dimensions
- Overall Length: Approximately 107 inches (varies based on options and configuration)
- Overall Width: Approximately 43 inches
- Wheelbase: Approximately 67 inches
Operational Features
- Turret Swing Reach Functionality
- Fork Length: Varies
- Electric Steering
Tires
- Tire Type: Polyurethane
- Tire Configuration: Standard forks and reach trucks typically consist of two drive tires and one or two caster/support wheels
Operator Environment
- Man Down Configuration
- Ergonomic Controls

Select Equipment Sales
Sales Dept.: 657-212-2302
6911 8th St
Buena Park, CA 90620

Select Equipment Sales
6911 8th St

Buena Park, CA 90620

657-212-2302

Buena Park, California 90620

2017 Bendi B40AC

Select Equipment Sales

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: U230825
MAKE:: Bendi
MODEL:: B40AC
MAST TYPE:: Three Stage
MAST - LOWERED:: 87 in
MAST - RAISED:: 198 in
FUEL:: Electric
HOURS:: 4600 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: California

Triple 87/198 Mast, 48v Electric, 54" Forks

Model Number: B40-AC
Manufacturer: Bendi
Type: Forklift
Subtype: Articulated 4 Wheel Sitdown - Gas/Electric
Fuel Type: Gas/Electric (fuelstartElectricfuelend)

General Specifications
- Load Capacity: 4,000 lbs
- Power Source: Combination of gas and electric power
- Operator Type: Sitdown
- Number of Wheels: 4

Dimensions
- Overall Length: Approximately 111 inches
- Overall Width: 48 inches
- Overall Height (Cab): 86 inches
- Wheelbase: 67 inches
- Ground Clearance: 4 inches

Performance
- Travel Speed (laden/unladen): 6 mph/8 mph
- Lift Speed (laden/unladen): 59 ft/min
- Gradeability (laden/unladen): 15%/20%

Tires
- Tire Type: Pneumatic
- Tire Size (Front): 18 x 7-8
- Tire Size (Rear): 15 x 5-11

Battery
- Voltage: 48V

Forks
- Fork Length: Varies
- Fork Width: 4.7 inches
- Fork Thickness: 1.8 inches

Select Equipment Sales
Sales Dept.: 657-212-2302
6911 8th St
Buena Park, CA 90620

Select Equipment Sales
6911 8th St

Buena Park, CA 90620

657-212-2302

Buena Park, California 90620

2022 Bendi B3/30AC-200S

1 Source Material Handling, Inc.

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: N22220201
MAKE:: Bendi
MODEL:: B3/30AC-200S
MAST TYPE:: Three Stage
MAST - LOWERED:: 143 in
MAST - RAISED:: 276 in
FUEL:: Electric
HOURS:: 4 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

72" Aisles Lithium Battery Option Available

Manufacturer: Bendi
Model Number: B3/30AC-200S

Type: Forklift
Subtype: Man Down 3 & 4 Wheel SwingMast Gas/Electric
Fuel Type: Electric

Dimensions
- Overall Length: 148 inches
- Overall Width: 42 inches
- Overall Height: 86 inches
- Wheelbase: 82 inches
- Ground Clearance: 3 inches
Capacity
- Load Capacity: 3,000 lbs
Performance
- Travel Speed (Unloaded): 9 mph
- Travel Speed (Loaded): 7 mph
- Lift Speed (Unloaded): 78 feet/min
- Lift Speed (Loaded): 64 feet/min
- Gradeability (Loaded): 10%
Weight
- Truck Weight: 9,065 lbs
Forks
- Fork Length: Varies
Power System
- Battery Voltage: 48 volts
- Electric Motor: AC

1 Source Material Handling, Inc.
Sales Dept: 1 818 593 0020
15519 Arrow Highway
Irwindale, CA 91706

1 Source Material Handling, Inc.
15519 Arrow Highway

Irwindale, CA 91706

1 818 593 0020

Irwindale, California 91706

2024 Bendi B3/30AC-200S

1 Source Material Handling, Inc.

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: N24240113
MAKE:: Bendi
MODEL:: B3/30AC-200S
MAST TYPE:: Three Stage
MAST - LOWERED:: 118 in
MAST - RAISED:: 222 in
FUEL:: Electric
HOURS:: 1 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

72" Aisles Lithium Battery Option Available

Manufacturer: Bendi
Model Number: B3/30AC-200S

Type: Forklift
Subtype: Man Down 3 & 4 Wheel SwingMast Gas/Electric
Fuel Type: Electric

Dimensions
- Overall Length: 148 inches
- Overall Width: 42 inches
- Overall Height: 86 inches
- Wheelbase: 82 inches
- Ground Clearance: 3 inches
Capacity
- Load Capacity: 3,000 lbs
Performance
- Travel Speed (Unloaded): 9 mph
- Travel Speed (Loaded): 7 mph
- Lift Speed (Unloaded): 78 feet/min
- Lift Speed (Loaded): 64 feet/min
- Gradeability (Loaded): 10%
Weight
- Truck Weight: 9,065 lbs
Forks
- Fork Length: Varies
Power System
- Battery Voltage: 48 volts
- Electric Motor: AC

1 Source Material Handling, Inc.
Sales Dept: 1 818 593 0020
15519 Arrow Highway
Irwindale, CA 91706

1 Source Material Handling, Inc.
15519 Arrow Highway

Irwindale, CA 91706

1 818 593 0020

Irwindale, California 91706

2022 Bendi B3/30AC-200S

1 Source Material Handling, Inc.

New

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: N22220201-b
MAKE:: Bendi
MODEL:: B3/30AC-200S
MAST TYPE:: Three Stage
MAST - LOWERED:: 133 in
MAST - RAISED:: 250 in
FUEL:: Electric
HOURS:: 4 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: California

72" Aisles Lithium Battery Option Available

Manufacturer: Bendi
Model Number: B3/30AC-200S

Type: Forklift
Subtype: Man Down 3 & 4 Wheel SwingMast Gas/Electric
Fuel Type: Electric

Dimensions
- Overall Length: 148 inches
- Overall Width: 42 inches
- Overall Height: 86 inches
- Wheelbase: 82 inches
- Ground Clearance: 3 inches
Capacity
- Load Capacity: 3,000 lbs
Performance
- Travel Speed (Unloaded): 9 mph
- Travel Speed (Loaded): 7 mph
- Lift Speed (Unloaded): 78 feet/min
- Lift Speed (Loaded): 64 feet/min
- Gradeability (Loaded): 10%
Weight
- Truck Weight: 9,065 lbs
Forks
- Fork Length: Varies
Power System
- Battery Voltage: 48 volts
- Electric Motor: AC

1 Source Material Handling, Inc.
Sales Dept: 1 818 593 0020
15519 Arrow Highway
Irwindale, CA 91706

1 Source Material Handling, Inc.
15519 Arrow Highway

Irwindale, CA 91706

1 818 593 0020

Irwindale, California 91706

2007 Bendi B30/42AC

Global Fleet Solutions

Used

PRICE: $22,500 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: EQC063397
MAKE:: Bendi
MODEL:: B30/42AC
MAST TYPE:: Two Stage Full Free
MAST - LOWERED:: 30 in
MAST - RAISED:: 180 in
FUEL:: Electric
HOURS:: 7579 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: Ontario

Model Number: B30-42AC
Manufacturer: Bendi
Type: Forklift
Subtype: Man Down 3 & 4 Wheel SwingMast Gas/Electric
Fuel Type Used: Gas/Electric

Dimensions

Overall Length: Approximately 98 inches
Overall Width: Approximately 48 inches
Wheelbase: Approximately 71 inches
Ground Clearance: Approximately 3.5 inches
Overhead Guard Height: Approximately 84 inches
Turning Radius: Approximately 95 inches

Capacity

Load Capacity: Approximately 6,000 to 9,259 lbs

Performance

Travel Speed: Approximately 8.5 mph
Lift Speed: Approximately 93 feet per minute
Lowering Speed: Approximately 95 feet per minute

Powertrain

Drive Motor: AC Electric Motor
Lift Motor: AC Electric Motor
Steering: Electric Power Steering

Tires

Tire Type: Pneumatic or solid
Front Tires: Varies by configuration
Rear Tires: Varies by configuration

Brakes

Service Brake: Hydraulic
Parking Brake: Mechanical/Hydraulic

Global Fleet Solutions
Sales Rep: 1 888 451 2398
17300 W Valley Hwy
Seattle, WA 98188

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

Global Fleet Solutions
17300 W Valley Hwy

Seattle, WA 98188

1 888 451 2398

Seattle, Washington 98188

2019 Bendi B40/48AC180D

Apex Material Handling Corporation

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 11584
MAKE:: Bendi
MODEL:: B40/48AC180D
MAST TYPE:: Three Stage
MAST - LOWERED:: 200 in
MAST - RAISED:: 492 in
FUEL:: Electric
HOURS:: 2000 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Illinois

2019' Bendi B40/48 200/492 s/s with battery 2000 hrs

Manufacturer: Bendi
Model Number: B40/48AC-180D
Type: Forklift
Powertrain
- Power Source: Electric
- Motor Type: AC
- Battery Voltage: 48V DC
Capacity
- Load Capacity: Up to 4,800 lbs
Dimensions
- Overall Width: Approximately 48 inches
- Overall Length: Varies
- Turning Radius: Approximately 130 inches
Performance
- Travel Speed: Approximately 6.5 mph (loaded)
Tires
- Tire Type: Solid
Operator Convenience
- Adjustable Steering Column
- Ergonomic Controls
Safety Features
- Seat Belt
- Overhead Guard

Apex Material Handling Corporation
Dan Choate: 630-521-3442
391 Charles Court
St. Charles, IL 60185

Apex Material Handling Corporation
391 Charles Court

St. Charles, IL 60185

630-521-3442

St. Charles, Illinois 60185

2015 Bendi B40AC

Premier Lift Equipment

Used

PRICE: CALL FOR PRICE

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 7656
MAKE:: Bendi
MODEL:: B40AC
MAST - LOWERED:: 95 in
MAST - RAISED:: 276 in
FUEL:: Electric
HOURS:: 13220 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Ontario

42" forks, 48 volt battery and charger.

Model Number: B40-AC
Manufacturer: Bendi
Type: Forklift
Subtype: Articulated 4 Wheel Sitdown - Gas/Electric
Fuel Type: Gas/Electric (fuelstartElectricfuelend)

General Specifications
- Load Capacity: 4,000 lbs
- Power Source: Combination of gas and electric power
- Operator Type: Sitdown
- Number of Wheels: 4

Dimensions
- Overall Length: Approximately 111 inches
- Overall Width: 48 inches
- Overall Height (Cab): 86 inches
- Wheelbase: 67 inches
- Ground Clearance: 4 inches

Performance
- Travel Speed (laden/unladen): 6 mph/8 mph
- Lift Speed (laden/unladen): 59 ft/min
- Gradeability (laden/unladen): 15%/20%

Tires
- Tire Type: Pneumatic
- Tire Size (Front): 18 x 7-8
- Tire Size (Rear): 15 x 5-11

Battery
- Voltage: 48V

Forks
- Fork Length: Varies
- Fork Width: 4.7 inches
- Fork Thickness: 1.8 inches

Premier Lift Equipment
Kevin Patrick: 905-452-8361
99 West Drive Building H
Brampton, ON L6T 2J6

Premier Lift Equipment
99 West Drive Building H

Brampton, ON L6T 2J6

905-452-8361

Brampton, Ontario L6T 2J6

2022 Bendi B55/56AC

Advantage Material Handling

Used

PRICE: $39,900 USD

Get Quote

Download Specs

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 14456
MAKE:: Bendi
MODEL:: B55/56AC
MAST TYPE:: Three Stage
MAST - LOWERED:: 87 in
MAST - RAISED:: 198 in
FUEL:: Electric
HOURS:: 12.9 Hrs
SIDESHIFTER:: NO
CAPACITY:: 5500 lbs
Unit Location:: Illinois

2022 Bendi B55AC, 198" Triple, 48vlt Batt & Charger, 12 Hour

Model Number: B55/56AC
Manufacturer: Bendi
Type: Forklift
Subtype: Man Down 3 & 4 Wheel SwingMast Gas/Electric
Fuel Type Used: Hybrid Electric
Power Information
- Propulsion: Fuel/Electric Hybrid
- Battery Voltage: 48V
- Drive Motors: AC
Dimensions
- Length: 9.8 ft (excluding forks)
- Width: 4 ft
- Operator Compartment Height: 8 ft
- Ground Clearance: 3.5 inches
Capacity
- Lifting Capacity: 5,500 lbs
Performance
- Travel Speed: 9 mph
- Lift Speed: 60 ft/min
- Lowering Speed: 55 ft/min
- Turning Radius: 5.5 ft
Tire Information
- Type: Cushion
Brakes
- Service Brakes: Hydraulic
- Parking Brake: Electric
Operator Environment
- Ergonomic Controls
- LCD Display for diagnostics

Advantage Material Handling
Scott Burkhalter: 847-416-1662
900 Tower Rd
Mundelein, IL 60060

Finance at $/mo

SEE SIMILAR UNITS MORE FROM SELLER

Advantage Material Handling
900 Tower Rd

Mundelein, IL 60060

847-416-1662

Mundelein, Illinois 60060

2006 Bendi B30/42E180D

Forklifts of Minnesota

Used

PRICE: $28,980 USD

Get Quote

Download Specs

DETAILS

SPECS

CONTACT

FINANCE

STK#:: U04295
MAKE:: Bendi
MODEL:: B30/42E180D
MAST TYPE:: Three Stage
MAST - RAISED:: 198 in
FUEL:: Electric
Unit Location:: Minnesota

Model Number: B30-42E180D
Manufacturer: Bendi
Type: Forklift
Subtype: Multi Directional IC & Electric Sideloading
Fuel Type Used: Fuel Start Electric
Capacity: 3,000 - 4,200 lbs
Overall Length: Varies
Overall Width: 49 inches
Overall Height: 80 inches
Weight: Varies, typically around 5,400 - 6,500 lbs
Turning Radius: 67 inches
Drive Speed: Up to 6.5 mph
Gradeability: Up to 20%
Power Source: 48V Electric
Wheel Base: 42 inches
Fork Length: Varies
Fork Width: 4 inches
Fork Spread: Varies

Forklifts of Minnesota
Jake Schubert: 952 887 5400
2201 W 94th St
Bloomington, MN 55431

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

SEE SIMILAR UNITS TEXT SELLER

Forklifts of Minnesota
2201 W 94th St

Bloomington, MN 55431

952 887 5400

Bloomington, Minnesota 55431

Bendi b3b30ac200s Forklift For Sale

Bendi Models

Forklift Manufacturers

Forklift Subcategories