Overview
Spec Sheet
Shipping/Freight
Equipment Description
2018 Bendi B40/48IC Man Down LPG Turret - 4000lb Lift Capacity - 195" Three Stage Mast - 4502 Drive Hours - Sideshift & Forks Included. Good Cushion Tires. FOB Los Angeles, CA - more pictures available.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: B40/48IC
  • Manufacturer: Bendi
  • Type: Forklift
  • Fuel Type Used: LP Gas
  • Load Capacity:
    • 4,000 lbs to 4,800 lbs
  • Power Type:
    • Engine powered
  • Dimensions:
    • Overall Width: Approximately 48 inches
    • Overall Length: Varies depending on model and configuration
  • Tires:
    • Pneumatic tires
  • Fork Length:
    • Varies
  • Performance:
    • Travel Speed: Approximately 6.2 - 7.1 mph (with load)
    • Lifting Speed: Approximately 52 ft/min (with load)
    • Lowering Speed: Approximately 70 ft/min (with load)
  • Turning Radius:
    • Approximately 87 inches

2018 Bendi B40/48IC

man down 3 & 4 wheel swingmast gas/electric lp gas

$32,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sako Krikorian
Phone:

ADDRESS
Johns Lift Repair and Service Inc.
546 S Greenwood Ave
MontebelloCalifornia 90640
ATTRIBUTES
STOCK #:
17
YEAR:
2018
Manufacturer:
MODEL #:
CAPACITY:
4000
FUEL:
MAST TYPE:
MAST HEIGHT:
195 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
4502
UNIT LOCATION:
California [90640]
DESCRIPTION:
2018 Bendi LPG Turret - 195" Triple
POST DATE:
4/13/2026
Reviews
Useful
Not

The Bendi B40/48IC forklift packs a punch with its LP gas engine, making it a solid choice for anyone needing reliable performance in tight spaces. During my time at the warehouse, we relied on this model to maneuver through narrow aisles, and it honestly exceeded my expectations. It’s smooth to operate, which was a pleasant surprise during those long shifts when fatigue sets in. Plus, it has this handy turning radius that really comes in clutch when you're trying to drop off pallets in a hurry. Overall, it stood out among the fleet we had, proving itself as a dependable workhorse.



Review by Mike Thompson (10/29/2025)

  • Model Number: B40/48IC
  • Manufacturer: Bendi
  • Type: Forklift
  • Fuel Type Used: LP Gas
  • Load Capacity:
    • 4,000 lbs to 4,800 lbs
  • Power Type:
    • Engine powered
  • Dimensions:
    • Overall Width: Approximately 48 inches
    • Overall Length: Varies depending on model and configuration
  • Tires:
    • Pneumatic tires
  • Fork Length:
    • Varies
  • Performance:
    • Travel Speed: Approximately 6.2 - 7.1 mph (with load)
    • Lifting Speed: Approximately 52 ft/min (with load)
    • Lowering Speed: Approximately 70 ft/min (with load)
  • Turning Radius:
    • Approximately 87 inches
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following