The Raymond EASI-OPC30TT is an electric order picker known for its efficiency in warehouse operations. It features advanced ergonomic design for operator comfort, allowing for ease of use and reduced fatigue. The order picker offers excellent maneuverability and control, providing precise handling in narrow aisles. Its high lift capability and stable platform enable effective picking at various heights. Additionally, it incorporates energy-efficient technologies and is designed for easy maintenance, enhancing productivity and reducing operational costs.
Lift Speed: Approximately 40 fpm (feet per minute)
Lowering Speed: Approximately 50 fpm
Gradeability: Up to 10%
Powertrain
Power Source: Electric
Battery Voltage: 36V
Drive Motor: AC
Tires
Tire Type: Polyurethane
Drive Tire Size: 13 inches
Steer Tire Size: 10 inches
Operator Compartment
Seated/Standing: Standing
Steering: Electronic Power Steering
Safety Features
Deadman Pedal
Operator Presence System
Discount Forklift Sales Dept: 720-770-2783 4905 Lima St Denver, CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Battery Capacity: Typically ranges, check specific configurations
Dimensions
Overall Length: Approximately 105 inches
Overall Width: About 41 inches
Wheelbase: Around 57 inches
Performance
Load Capacity: 4,500 lbs
Drive Speed (loaded/unloaded): Typically ranges, consult specific metrics
Lift Speed (loaded/unloaded): Typically ranges, consult specific metrics
Travel Speed: Approximately 6.5 mph unladen
Chassis
Steering: Electric power steering
Tire Type: Cushion
Brakes: Regenerative/Electromagnetic
Additional Features
Operator Compartment: Ergonomically designed
Control Type: Multifunction control handle
Visibility: Enhanced visibility features
Discount Forklift Sales Dept: 720-770-2783 4905 Lima St Denver, CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
**Model: EASI R40TT Forklift Specifications**
**Manufacturer:**
- Raymond
**General Specifications:**
- **Model Number:** EASI R40TT
- **Type:** Forklift
- **Subtype:** Electric Narrow Aisle Single Reach
- **Fuel Type:** Electric
**Dimensions:**
- **Length to Fork Face:** Approximately 84 inches
- **Overall Width:** About 48 inches
- **Wheelbase:** Approximately 60 inches
- **Turning Radius:** Around 60 inches
- **Overhead Guard Height:** Approximately 88 inches
**Performance:**
- **Load Capacity:** Up to 4,000 lbs
- **Travel Speed:** Approximately 6.5 mph (laden/unladen)
- **Lift Speed:** Approximately 50 feet per minute (unladen)
- **Lower Speed:** Approximately 100 feet per minute (unladen)
**Power Source:**
- **Battery Type:** Electric Lead Acid
- **Battery Voltage:** 36V
- **Charger Type:** Onboard/External
**Chassis:**
- **Tires:** Polyurethane
- **Brakes:** Regenerative and Electromagnetic
**Operator Compartment:**
- **Steering:** Electronic power-assisted steering
- **Controls:** Multi-function control handle
- **Seat/Stand:** Stand-up user position
**Safety Features:**
- **Standard Safety Features:** Proximity sensor, deadman pedal
**Forks and Carriage:**
- **Fork Length:** Varies
- **Fork Width:** Approximately 3.9 inches each
**Additional Options:**
- **Cold Storage Option:** Yes (optional packages available)
- **Accessory Rail:** Available for additional attachments
MONTHLY RENTAL
$1,449 USD
WEEKLY RENTAL
$749 USD
DAILY RENTAL
$9,750 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
World Equipment Services Brandon : 951-904-3770 800 S. Wineville Ave. Ontario, CA 91761
**Model: EASI R40TT Forklift Specifications**
**Manufacturer:**
- Raymond
**General Specifications:**
- **Model Number:** EASI R40TT
- **Type:** Forklift
- **Subtype:** Electric Narrow Aisle Single Reach
- **Fuel Type:** Electric
**Dimensions:**
- **Length to Fork Face:** Approximately 84 inches
- **Overall Width:** About 48 inches
- **Wheelbase:** Approximately 60 inches
- **Turning Radius:** Around 60 inches
- **Overhead Guard Height:** Approximately 88 inches
**Performance:**
- **Load Capacity:** Up to 4,000 lbs
- **Travel Speed:** Approximately 6.5 mph (laden/unladen)
- **Lift Speed:** Approximately 50 feet per minute (unladen)
- **Lower Speed:** Approximately 100 feet per minute (unladen)
**Power Source:**
- **Battery Type:** Electric Lead Acid
- **Battery Voltage:** 36V
- **Charger Type:** Onboard/External
**Chassis:**
- **Tires:** Polyurethane
- **Brakes:** Regenerative and Electromagnetic
**Operator Compartment:**
- **Steering:** Electronic power-assisted steering
- **Controls:** Multi-function control handle
- **Seat/Stand:** Stand-up user position
**Safety Features:**
- **Standard Safety Features:** Proximity sensor, deadman pedal
**Forks and Carriage:**
- **Fork Length:** Varies
- **Fork Width:** Approximately 3.9 inches each
**Additional Options:**
- **Cold Storage Option:** Yes (optional packages available)
- **Accessory Rail:** Available for additional attachments
MONTHLY RENTAL
$1,449 USD
WEEKLY RENTAL
$749 USD
DAILY RENTAL
$9,750 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
World Equipment Services Brandon : 951-904-3770 800 S. Wineville Ave. Ontario, CA 91761
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Discount Forklift Sales Dept: 720-770-2783 4905 Lima St Denver, CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Material Solutions INC Joe Depinto: 609-400-4542 28C Industrial Drive Hamilton, NJ 08619
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Material Solutions INC Joe Depinto: 609-400-4542 28C Industrial Drive Hamilton, NJ 08619
TB Forklifts Antonio Borboa: 281-746-6799 5410 Mary Francis Dr Houston, TX 77039
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
TB Forklifts Antonio Borboa: 281-746-6799 5410 Mary Francis Dr Houston, TX 77039
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Equipment
Close