New Feature: Eliftruck Price Point Introducing Eliftruck Price Point — the forklift price estimator built for buyers, sellers, and fleet managers. Instantly get accurate, market-based valuations with just a few details.
Don’t overpay or undersell—discover your forklift’s true market value in seconds. Click on the PRICE POINT orange button below to get started.
The Komatsu FG25TLS is a specific model of forklift known for its reliable performance in material handling applications. It typically features a robust design with a lift capacity suited for medium-duty tasks, making it suitable for various industrial and commercial environments. The model is often praised for its ergonomic operator controls and efficient fuel consumption, thanks to its use of a gasoline-powered engine. Additionally, its versatility is enhanced by a range of available attachments and accessories, allowing it to adapt to different tasks and operational requirements.
TB Forklifts Antonio Borboa 5410 Mary Francis Dr Houston, TX 77039
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height: 85 inches (to the top of the overhead guard)
Wheelbase: 70.9 inches
Ground Clearance: 4.7 inches
Weight
Operating Weight: Approximately 8,200 pounds
Engine
Engine Model: Komatsu 4H Series
Rated Power: 47 HP at 2,400 RPM
Performance
Load Capacity: 5,000 pounds
Travel Speed: 11.2 mph (unloaded)
Lift Speed: 105 feet/min (unloaded)
Gradeability: 32% (with load)
Chassis
Tire Type: Pneumatic
Front Tire Size: 7.00-12-12PR
Rear Tire Size: 6.00-9-10PR
Other Specifications
Steering: Hydraulic Power Steering
Brakes: Hydraulic Drum Brakes
Fuel Tank Capacity: 9.5 gallons
TB Forklifts Antonio Borboa 5410 Mary Francis Dr Houston, TX 77039
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Ground Clearance (Lowest Point): Approximately 4 inches
Ground Clearance (Center of Wheelbase): Approximately 4.5 inches
Weight
Weight: Approximately 8,800 lbs
Performance
Lifting Capacity: 4,000 lbs
Travel Speed (Loaded/Unloaded): Approximately 10 mph / 11 mph
Turning Radius: Approximately 85 inches
Battery Voltage: 48 Volts
Battery Capacity: Varies
Chassis
Wheel Type: Solid Pneumatic
Number of Wheels (Front/Rear): 2/2
Tire Size (Front): 21 inches
Tire Size (Rear): 16 inches
Operator Environment
Seat: Adjustable, with seatbelt
Steering: Power steering
Instrumentation: Multifunctional display panel
Additional Features
Regenerative Braking
Electronic Control System
LED Work Lights
Somerset Equipment Sales - Illinois George Rieber 1375 Kingsland Batavia , IL 60510
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Ground Clearance (Lowest Point): Approximately 4 inches
Ground Clearance (Center of Wheelbase): Approximately 4.5 inches
Weight
Weight: Approximately 8,800 lbs
Performance
Lifting Capacity: 4,000 lbs
Travel Speed (Loaded/Unloaded): Approximately 10 mph / 11 mph
Turning Radius: Approximately 85 inches
Battery Voltage: 48 Volts
Battery Capacity: Varies
Chassis
Wheel Type: Solid Pneumatic
Number of Wheels (Front/Rear): 2/2
Tire Size (Front): 21 inches
Tire Size (Rear): 16 inches
Operator Environment
Seat: Adjustable, with seatbelt
Steering: Power steering
Instrumentation: Multifunctional display panel
Additional Features
Regenerative Braking
Electronic Control System
LED Work Lights
Somerset Equipment Sales - Illinois George Rieber 1375 Kingsland Batavia , IL 60510
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Ground Clearance (Lowest Point): Approximately 4 inches
Ground Clearance (Center of Wheelbase): Approximately 4.5 inches
Weight
Weight: Approximately 8,800 lbs
Performance
Lifting Capacity: 4,000 lbs
Travel Speed (Loaded/Unloaded): Approximately 10 mph / 11 mph
Turning Radius: Approximately 85 inches
Battery Voltage: 48 Volts
Battery Capacity: Varies
Chassis
Wheel Type: Solid Pneumatic
Number of Wheels (Front/Rear): 2/2
Tire Size (Front): 21 inches
Tire Size (Rear): 16 inches
Operator Environment
Seat: Adjustable, with seatbelt
Steering: Power steering
Instrumentation: Multifunctional display panel
Additional Features
Regenerative Braking
Electronic Control System
LED Work Lights
Somerset Equipment Sales - Illinois George Rieber 1375 Kingsland Batavia , IL 60510
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Operating Weight: varies depending on configuration
Powertrain:
Engine Power: approx. 50 HP
Transmission Type: Powershift
Performance:
Travel Speed: approx. 11 mph
Lifting Speed: varies with load
Forks:
Length: varies
Somerset Equipment Sales - Illinois George Rieber 1375 Kingsland Batavia , IL 60510
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Operating Weight: varies depending on configuration
Powertrain:
Engine Power: approx. 50 HP
Transmission Type: Powershift
Performance:
Travel Speed: approx. 11 mph
Lifting Speed: varies with load
Forks:
Length: varies
Somerset Equipment Sales - Illinois George Rieber 1375 Kingsland Batavia , IL 60510
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Discount Forklift Sales Dept 4905 Lima St Denver, CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Discount Forklift Sales Dept 4905 Lima St Denver, CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Lift Speed: 60 feet per minute (laden), 100 feet per minute (unladen)
Gradeability: 15% (laden), 20% (unladen)
Turning Radius: 70 inches
Powertrain
Motor Type: Electric Drive Motor
Rated Output: 7.5 kW
Battery Type: Industrial Lead-Acid Battery
Battery Voltage: 48V
Chassis
Tire Type: Pneumatic Solid Tires
Front Tires: 18 x 8 inches
Rear Tires: 16 x 6 inches
Operator Environment
Operator Compartment: Spacious with Adjustable Seat
Steering: Power Steering
TB Forklifts Antonio Borboa 5410 Mary Francis Dr Houston, TX 77039
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close