Overview
Spec Sheet
Shipping/Freight
Equipment Description
#D21728 Nice Komatsu FD70, 15,500 lb. Capacity Pneumatic tire forklift with rebuilt diesel engine, automatic transmission, 8’ pallet forks, air pneumatic tires, 200” triple stage mast, CAB with heat, New PM service and New paint job!
Spec Sheet
  • General Specifications
    • Manufacturer: Komatsu
    • Model Number: FD70
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Engine Specifications
    • Engine Type: Diesel Engine
    • Engine Power: Approx. 95 HP
    • Number of Cylinders: 4
  • Dimensions
    • Overall Length: Approx. 12.5 feet
    • Overall Width: Approx. 5.5 feet
    • Overall Height: Approx. 8.5 feet
    • Wheelbase: Approx. 7.9 feet
    • Ground Clearance: Approx. 8 inches
  • Weight
    • Operating Weight: Approx. 22,000 lbs
  • Capacity
    • Maximum Load Capacity: 15,400 lbs
  • Performance
    • Travel Speed: Approx. 20 mph
    • Turning Radius: Approx. 11 feet
  • Tires
    • Tire Type: Pneumatic
    • Number of Tires: 4
  • Forks
    • Fork Length: Varies
    • Adjustable Fork Width: Yes
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

1988 Komatsu FD70

Buy or Rent

pneumatic tire 4 wheel sit down diesel

$49,995 USD

$600 USD per day

$1,710 USD per week

$4,400 USD per month

 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Dennis Firkins
Phone:

ADDRESS
Western Material Handling
5678 Eudora St
Commerce CityColorado 80022
ATTRIBUTES
STOCK #:
D21728
YEAR:
1988
Manufacturer:
MODEL #:
CAPACITY:
15500
FUEL:
MAST TYPE:
MAST HEIGHT:
100 / 200 in
SERIAL #:
60003
CONDITION:
Used/Rental
HOUR METER:
4463
UNIT LOCATION:
Colorado [80022]
DESCRIPTION:
D21728 KOMATSU FD70 15.5K PNEU CAB 3STG REBUILT DIESEL ENG
POST DATE:
12/5/2025
Reviews
Useful
Not

The Komatsu FD70 really impressed me during the time we rented it for a big warehouse project. I remember how smoothly it handled all those heavy loads, making the job feel a lot easier than I anticipated. The diesel engine packs a nice punch, yet it didn’t feel too noisy, which is a plus when everyone is trying to communicate on the floor. Navigating around tight corners with its sturdy pneumatic tires was surprisingly effortless. Honestly, my coworkers and I were joking about how we wished we could keep it around longer. Overall, it's a solid choice if you need reliable lifting power without the fuss.


Review by Jake Thompson (1/16/2025)

  • General Specifications
    • Manufacturer: Komatsu
    • Model Number: FD70
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Engine Specifications
    • Engine Type: Diesel Engine
    • Engine Power: Approx. 95 HP
    • Number of Cylinders: 4
  • Dimensions
    • Overall Length: Approx. 12.5 feet
    • Overall Width: Approx. 5.5 feet
    • Overall Height: Approx. 8.5 feet
    • Wheelbase: Approx. 7.9 feet
    • Ground Clearance: Approx. 8 inches
  • Weight
    • Operating Weight: Approx. 22,000 lbs
  • Capacity
    • Maximum Load Capacity: 15,400 lbs
  • Performance
    • Travel Speed: Approx. 20 mph
    • Turning Radius: Approx. 11 feet
  • Tires
    • Tire Type: Pneumatic
    • Number of Tires: 4
  • Forks
    • Fork Length: Varies
    • Adjustable Fork Width: Yes
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following