A ride-on floor cleaner is a type of industrial cleaning equipment used in the material handling industry to efficiently clean large floor areas. Designed with an operator seat, these machines allow the user to sit comfortably and drive the unit similarly to a small vehicle. This design improves productivity by covering more ground in less time compared to walk-behind models. Equipped with features such as powerful scrubbing brushes, strong vacuums, and adjustable water and detergent dispensers, ride-on floor cleaners are ideal for maintaining cleanliness and safety in warehouses, distribution centers, and manufacturing facilities where efficiency and thoroughness are critical.
Weight: Approximately 2,200 lbs (without batteries)
Performance
Cleaning Path Width: Approximately 50 inches with side brush
Max Speed: 3.8 mph
Gradeability: Up to 15%
Brush Speed: 300 rpm
Scrubbing System
Brush Deck Options: Disk or Cylindrical
Main Brush Length: Approximately 36 inches
Solution Tank Capacity: 50 gallons
Recovery Tank Capacity: 60 gallons
Power System
Power Source: Battery
Voltage: 36V
Battery Capacity: Range from approximately 360 to 510 Ah
Other Features
Ergonomic Operator Compartment
Touch-n-Go™ Control Module
ESt and ec-H2O NanoClean™ Technologies
Durable Construction with Corrosion-Resistant Materials
Easy-to-Access Service Points
Great Lakes Brookside LLC Michael Reiser 9612 Meech Cleveland, OH 44105
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
MH Equipment Company Gresham Carter 3306 Gilmore Industrial Blvd Louisville, KY 40213
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All units are sold as-is with no warranty. Batteries unless otherwise stated are not warrantied and are as is.
Komatsu Forklift of Chicago Mark Henkel 11800 S. Austin Ave Alsip, IL 60803
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Weight: Approximately 2,200 lbs (without batteries)
Performance
Cleaning Path Width: Approximately 50 inches with side brush
Max Speed: 3.8 mph
Gradeability: Up to 15%
Brush Speed: 300 rpm
Scrubbing System
Brush Deck Options: Disk or Cylindrical
Main Brush Length: Approximately 36 inches
Solution Tank Capacity: 50 gallons
Recovery Tank Capacity: 60 gallons
Power System
Power Source: Battery
Voltage: 36V
Battery Capacity: Range from approximately 360 to 510 Ah
Other Features
Ergonomic Operator Compartment
Touch-n-Go™ Control Module
ESt and ec-H2O NanoClean™ Technologies
Durable Construction with Corrosion-Resistant Materials
Easy-to-Access Service Points
ATP Equipment Exchange Inc. Anthony Plazibat 303 Mound Rd Bldg 1 Complex 2 Rockdale, IL 60436
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Brush/Pad Size: Varies (depending on model specifications)
Brush Pressure: Variable up to 250 lbs
Dimensions:
Length: Approximately 84 inches
Width: Approximately 48 inches
Height: Approximately 58 inches
Performance:
Scrubbing Pressure: Up to 250 lbs
Maximum Speed: Approximately 5 mph
Features:
Operator-friendly controls
Quiet operation suitable for noise-sensitive environments
Durable construction for heavy-duty use
Easy access to tanks for maintenance
Advanced water recovery system
National Lift Equipment Sales 300 Pond St. Bristol, PA 19007
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Theoretical Capacity per Hour: Approx. 40,000 sqft
Estimated Coverage per Tank: Approx. 14,000 sqft
Brush and Scrub
Brush Type: Cylindrical
Brush Diameter: 12 inches
Brush Motor: 0.6 hp
Power Source
Battery Type: Sealed AGM
Battery Voltage: 24V
Run Time: Up to 3 hours
Tanks
Solution Tank Capacity: 21 gallons
Recovery Tank Capacity: 23 gallons
Vacuum System
Vacuum Motor: 0.5 hp
Waterlift: 65 inches
Dimensions
Overall Length: 54 inches
Overall Width: 33 inches
Height: 43 inches
Performance
Speed: Up to 3.5 mph
Weight
Weight without batteries: Approx. 488 lbs
Weight with batteries: Approx. 725 lbs
Nampa, ID Dillon Toyota Lift 1907 Madison Ave Nampa, ID 83687
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Sweeping Performance: 70,000 square feet per hour (approx.)
Brush Speed: 500 RPM (approx.)
Brush Down Pressure: 300 lbs (approx.)
Dimensions and Capacity
Length: 94 inches
Width: 58.5 inches
Height: 57.5 inches
Weight: 4,100 lbs (approx.) without LPG tank
Hopper Capacity: 14 cubic feet (approx.)
Debris Capacity: 660 lbs (approx.)
Engine Specifications
Engine Type: LPG
Power Output: 55 hp (approx.)
Additional Features
Dust Control: Multi-stage dust control system
Filtration: Panel filter with shaker
Operator Comfort: Ergonomic seat with safety belt
Control System: Intuitive controls with LCD display
Great Lakes Brookside LLC Michael Reiser 9612 Meech Cleveland, OH 44105
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Sweeping Performance: 70,000 square feet per hour (approx.)
Brush Speed: 500 RPM (approx.)
Brush Down Pressure: 300 lbs (approx.)
Dimensions and Capacity
Length: 94 inches
Width: 58.5 inches
Height: 57.5 inches
Weight: 4,100 lbs (approx.) without LPG tank
Hopper Capacity: 14 cubic feet (approx.)
Debris Capacity: 660 lbs (approx.)
Engine Specifications
Engine Type: LPG
Power Output: 55 hp (approx.)
Additional Features
Dust Control: Multi-stage dust control system
Filtration: Panel filter with shaker
Operator Comfort: Ergonomic seat with safety belt
Control System: Intuitive controls with LCD display
Great Lakes Brookside LLC Michael Reiser 9612 Meech Cleveland, OH 44105
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Equipment
Close