The LiuGong CLG2035G is a Class IV internal combustion forklift delivering 7,000 lbs (3,500 kg) capacity at a 24-inch (500 mm) load center, powered by a Kubota WJ2503-L-E3 2.491L 4-cylinder engine with dual-fuel capability (gasoline or LPG), producing 55.3 HP at 2,600 RPM and 175 N·m of torque at 1,200 RPM (LPG), with EU Stage V and EPA emissions compliance for clean indoor operation, and is equipped with a 3-stage mast offering a maximum fork height of 185 inches (4,700 mm) with 46 inches (1,170 mm) of free lift, lowering to 87.2 inches (2,215 mm) and extending to 227.3 inches (5,774 mm), with 6 degrees forward and 12 degrees backward mast tilt, a 43.3-inch carriage, 42.1 x 4.8 x 1.6 inch forks with a minimum spread of 9.6 inches and maximum of 42.2 inches, and a standard side shifter. The forklift rides on pneumatic tires (front: 28x9-15-14PR, rear: 6.50-10-10PR) on a 66.9-inch wheelbase with a front tread of 39.4 inches and rear tread of 38.8 inches, delivering a 95.9-inch minimum outside turning radius and a right-angle stack of 162 inches, with travel speeds of 11.5 mph loaded and 11.8 mph unloaded, lift speeds of 110 fpm loaded and 114 fpm unloaded, lower speeds of 101 fpm loaded and 83 fpm unloaded, maximum drawbar pull of 4,620 lbs, and gradeability of 20% loaded and 23% unloaded. Weighing 10,450 lbs unloaded with axle loads of 15,880 lbs front and 2,270 lbs rear when loaded and 3,744 lbs front and 6,706 lbs rear when unloaded, the chassis measures 107.8 inches to fork face, 48.2 inches overall width, and 86.6 inches overhead guard height, with ground clearance of 5.1 inches below the mast loaded and 6.5 inches at the center of the wheelbase, while service brakes are foot-operated hydraulic and parking brake is hand-operated mechanical. Optional equipment includes non-marking tires, foam-filled tires, enclosed cabs, fork positioners, rotators, clamps, and 3-way or 4-way hydraulic valve configurations to match your specific material handling needs. Contact us today for more details, pricing, or to schedule an inspection.