Search Across All Categories
price
-
Minus Plus
Minus Plus
New
Used
Rental
CAPACITY RANGE
-
Minus Plus
Minus Plus
minimum raised height
Minus Plus
Minus Plus
price
-
Minus Plus
Minus Plus
YEAR RANGE
-
Minus Plus
Minus Plus
hour meter
-
Minus Plus
Minus Plus
New
Used
Rental
price
-
Minus Plus
Minus Plus
YEAR RANGE
-
Minus Plus
Minus Plus
hour meter
-
Minus Plus
Minus Plus
New
Used
Rental
price
-
Minus Plus
Minus Plus
YEAR RANGE
-
Minus Plus
Minus Plus
hour meter
-
Minus Plus
Minus Plus
New
Used
Rental
CAPACITY RANGE
-
Minus Plus
Minus Plus
price
-
Minus Plus
Minus Plus
YEAR RANGE
-
Minus Plus
Minus Plus
hour meter
-
Minus Plus
Minus Plus
New
Used
Rental
price
-
Minus Plus
Minus Plus
YEAR RANGE
-
Minus Plus
Minus Plus
hour meter
-
Minus Plus
Minus Plus
New
Used
Rental
CAPACITY RANGE
-
Minus Plus
Minus Plus
price
-
Minus Plus
Minus Plus
YEAR RANGE
-
Minus Plus
Minus Plus
New
Used
Rental
price
-
Minus Plus
Minus Plus
New
Used
Rental
price
-
Minus Plus
Minus Plus
YEAR RANGE
-
Minus Plus
Minus Plus
hour meter
-
Minus Plus
Minus Plus
New
Used
Rental
price
-
Minus Plus
Minus Plus
YEAR RANGE
-
Minus Plus
Minus Plus
hour meter
-
Minus Plus
Minus Plus
New
Used
Rental
CAPACITY RANGE
-
Minus Plus
Minus Plus
price
-
Minus Plus
Minus Plus
YEAR RANGE
-
Minus Plus
Minus Plus
hour meter
-
Minus Plus
Minus Plus
New
Used
Rental

Toro 42"bucket Forklift For Sale

Explore our best priced selection of 1 Toro 42"bucket Forklift in stock. These Toro 42"bucket Forklift are available for immediate and local delivery.
sort by:
0 SELECTED
CLEAR
SHARE
COMPARE
Niagara Frontier Equipment Sales, Inc.
 
Used
PRICE
$695 USD
Get Quote
Get Brochure
DETAILS
CONTACT
FINANCE
STK#:
41805
MAKE:
Toro
MODEL:
42" BUCKET
SIDESHIFTER:
YES
Location:
New York
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Listings above this line match your search request, listings below may not match but are similar and may be used as an alternative.
Lift Mart International
 
Used
PRICE
$11,500 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
LMI-472
MAKE:
Toyota
MODEL:
8FGCU25
MAST TYPE:
Three Stage
MAST - LOWERED:
83 in
MAST - RAISED:
189 in
FUEL:
LP Gas
HOURS:
7767 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
Location:
Texas
Triple 83/189, SS/FP, 42" forks, 7767 hrs
  • Manufacturer: Toyota
  • Model Number: 8FGCU25
  • General Specifications:
    • Power Type: LPG (Liquid Petroleum Gas)
    • Operator Position: Sit-down
    • Tire Type: Cushion
    • Number of Wheels: 4
  • Dimensions:
    • Length to Face of Forks: 8.17 ft
    • Overall Width (Without Load): 3.5 ft
    • Height to Top of Overhead Guard: 7 ft
    • Turning Radius: 80.5 in
    • Minimum Outside Turning Radius: 5.5 ft
    • Wheelbase: 5.08 ft
  • Performance:
    • Rated Load Capacity: 5,000 lbs
    • Load Center: 24 in
    • Travel Speed (Loaded): 11.2 mph
    • Travel Speed (Unloaded): 11.5 mph
    • Lifting Speed (Loaded): 118 ft/min
    • Lifting Speed (Unloaded): 131 ft/min
    • Lowering Speed (Loaded): 98 ft/min
    • Lowering Speed (Unloaded): 98 ft/min
  • Engine Specifications:
    • Engine Model: Toyota 4Y
    • Engine Type: 4-cylinder, water-cooled
    • Displacement: 142 in³
    • Rated Power: 51 hp @ 2,400 RPM
    • Torque: 118.6 lbf·ft @ 1,600 RPM
  • Weights:
    • Service Weight: 8,750 lbs
    • Axle Loading Front: 12,284 lbs (With Load)
    • Axle Loading Rear: 1,466 lbs (With Load)
  • Wheel Specifications:
    • Front Tires: 21x7x15
    • Rear Tires: 16x5x10 ½
    • Tread (Front/Rear): 36/36 in
  • Transmission:
    • Transmission Type: Powershift
    • Number of Speeds (Forward/Reverse): 1/1
  • Brakes:
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical, hand operated
Lift Mart International
Ed Mora: 704-850-5332
518 Nafta Blvd Suite A
Laredo , TX 79045
Finance at $/mo
Miller Equipment Co.
 
Buy or Rent
PRICE
$29,850 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
RENTAL
CONTACT
MAKE:
Unicarriers
MODEL:
MJ1F4A40LV
MAST TYPE:
Three Stage
MAST - LOWERED:
93 in
MAST - RAISED:
187 in
FUEL:
LP Gas
HOURS:
8977 Hrs
SIDESHIFTER:
YES
CAPACITY:
9000 lbs
Location:
Texas
9K Pneumatic with Side Shift and Fork Positioner
  • Manufacturer: Unicarriers
  • Model Number: MJ1F4A40LV
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: LP Gas
  • Engine Specifications
    • Engine Type: Internal Combustion
    • Engine Power: Approximately 60-80 HP
    • Number of Cylinders: 4
    • Fuel Capacity: Approximately 16-20 gallons
  • Dimensions
    • Overall Length: Approximately 120-140 inches
    • Overall Width: Approximately 48-60 inches
    • Overall Height (Cab): Approximately 80-100 inches
    • Wheelbase: Approximately 65-70 inches
    • Fork Length: Varies
  • Performance
    • Load Capacity: Approximately 8,000-9,000 lbs
    • Travel Speed: Approximately 10-12 mph
    • Lift Speed: Approximately 60-80 feet/min
    • Gradeability: Approximately 20-25%
  • Tires
    • Type: Pneumatic
    • Tire Size (Front): Approximately 21x7-15
    • Tire Size (Rear): Approximately 16x6-10.5
  • Weight
    • Overall Weight: Approximately 15,000-18,000 lbs
  • Operator Area
    • Seating Capacity: 1
    • Seat Type: Suspension seat
    • Control Type: Hydraulic levers
CALL FOR RENTAL RATES
Reserve Rental
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Miller Equipment Co.
Foster Miller: 972-372-0955
1000 N First St
Garland, TX 75040
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$1,661 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41783
MAKE:
Toro
MODEL:
22342
Location:
New York
  • Manufacturer: Toro
  • Model Number: 22342
  • Type: Forklift
  • Subtype: Earth Moving and Construction
  • Engine
    • Engine Type: Diesel
    • Displacement: 201 cubic inches
    • Power Output: 74.3 HP
    • Cooling System: Liquid-cooled
    • Fuel Capacity: 30 gallons
  • Dimensions
    • Overall Length: 180 inches
    • Overall Width: 80 inches
    • Overall Height: 100 inches
    • Wheelbase: 90 inches
    • Ground Clearance: 14 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: 18 mph
    • Axle Type: Heavy-duty
    • Braking System: Hydraulic
    • Operating Weight: 16,000 lbs
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 12 x 16.5 inches
    • Rear Tire Size: 12 x 16.5 inches
  • Hydraulics
    • Hydraulic System Pressure: 2,500 psi
    • Hydraulic Flow Rate: 23 gallons per minute
    • Hydraulic Pump Type: Gear Pump
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Forklift Consulting LLC
 
Used
PRICE
$18,950 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
20757
MAKE:
Toyota
MODEL:
7FBEHU18
MAST TYPE:
Three Stage
MAST - LOWERED:
84 in
MAST - RAISED:
189 in
FUEL:
Electric
SIDESHIFTER:
YES
CAPACITY:
3500 lbs
Location:
Florida
TOYOTA 3 WHEEL ELECTRIC FORKLIFT 3,500 LB. CAPACITY
  • Model Number: 7FBEHU18
  • Manufacturer: Toyota
  • Type: Forklift
  • Fuel Type: LP Gas
    • Engine Specifications:
      • Engine Type: Internal Combustion
      • Fuel System: LPG
    • Dimensions:
      • Overall Length: 7 ft 4 in
      • Overall Width: 3 ft 6 in
      • Overall Height (Cab): 6 ft 8 in
      • Wheelbase: 4 ft 4 in
      • Ground Clearance: 3.9 in
    • Weight:
      • Service Weight: 7,500 lbs
    • Performance:
      • Load Capacity: 3,500 lbs
      • Travel Speed: 11.5 mph
      • Lifting Speed: 89 ft/min
      • Gradeability: 20%
    • Steering and Tires:
      • Steering Type: Hydraulic Power
      • Tires: Pneumatic
    • Brakes:
      • Brake System: Hydraulic
    • Hydraulics:
      • Hydraulic System Pressure: 2,500 psi
    • Forks:
      • Fork Length: Varies
Forklift Consulting LLC
Ed Valdes: 305-898-6428
6551 Lake Como Terrace
Miami Lakes, FL 33014
Finance at $/mo
Illinois Lift Equipment
 
Used
PRICE
$15,950 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
WARRANTY
STK#:
16374
MAKE:
Cat
MODEL:
GP18N
MAST TYPE:
Three Stage
MAST - LOWERED:
83 in
MAST - RAISED:
187 in
FUEL:
LP Gas
SIDESHIFTER:
NO
CAPACITY:
3500 lbs
Location:
Illinois
3500LB CAPACITY 3 STAGE MAST 83" LOWERED HEIGHT 187" RAISED
  • Manufacturer: Cat
  • Model Number: GP18N
General Specifications
  • Type: Forklift
  • Fuel Type: LPG (Liquid Petroleum Gas)
  • Operator Type: Seated Rider
  • Capacity: 3,500 lbs
  • Drive Type: 2-Wheel Drive
Engine
  • Engine Model: K21
  • Engine Type: 4-Cylinder, 4-Cycle
  • Power: 46 HP
  • Displacement: 126 cu in
Dimensions
  • Length to Fork Face: 83.3 in
  • Overall Width: 39.5 in
  • Overall Height with Overhead Guard: 81.1 in
  • Wheelbase: 55.1 in
  • Ground Clearance: 4.7 in
  • Turning Radius: 80.9 in
Performance
  • Travel Speed (Loaded): 11.2 mph
  • Travel Speed (Unloaded): 11.8 mph
  • Lifting Speed (Loaded): 110 ft/min
  • Lifting Speed (Unloaded): 118 ft/min
  • Lowering Speed (Loaded): 104 ft/min
  • Lowering Speed (Unloaded): 98 ft/min
Chassis
  • Tire Type: Solid Pneumatic
  • Front Tires: 6.50-10
  • Rear Tires: 5.00-8
  • Steering: Hydraulic Power Steering
Hydraulics
  • Main Hydraulic Pressure: 2,961 psi
Forks
  • Fork Length: Varies
  • Adjustable Fork Width: Yes
Illinois Lift Equipment
John Hellyer: 224-404-3255
640 Industrial Dr
Cary, IL 60013
Labor and parts for 30 days
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$1,661 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41785
MAKE:
Toro
MODEL:
22342
Location:
New York
  • Manufacturer: Toro
  • Model Number: 22342
  • Type: Forklift
  • Subtype: Earth Moving and Construction
  • Engine
    • Engine Type: Diesel
    • Displacement: 201 cubic inches
    • Power Output: 74.3 HP
    • Cooling System: Liquid-cooled
    • Fuel Capacity: 30 gallons
  • Dimensions
    • Overall Length: 180 inches
    • Overall Width: 80 inches
    • Overall Height: 100 inches
    • Wheelbase: 90 inches
    • Ground Clearance: 14 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: 18 mph
    • Axle Type: Heavy-duty
    • Braking System: Hydraulic
    • Operating Weight: 16,000 lbs
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 12 x 16.5 inches
    • Rear Tire Size: 12 x 16.5 inches
  • Hydraulics
    • Hydraulic System Pressure: 2,500 psi
    • Hydraulic Flow Rate: 23 gallons per minute
    • Hydraulic Pump Type: Gear Pump
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$44,641 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41787
MAKE:
Toro
MODEL:
DINGO TX1000W TURBO
FUEL:
Diesel
Location:
New York
  • General Specifications
    • Model Number: DINGO TX1000W TURBO
    • Manufacturer: Toro
    • Type: Forklift
    • Subtype: Earth Moving and Construction
  • Dimensions
    • Length: 105 inches
    • Width: 41 inches
    • Height: 53 inches
    • Ground Clearance: 6 inches
  • Weight
    • Operating Weight: 2,785 lbs
  • Performance
    • Fuel Type: Diesel
    • Travel Speed: 5 mph
    • Operating Capacity: 1,000 lbs
    • Bucket Breakout Force: 2,205 lbs
  • Engine
    • Engine Power: 24.9 HP
    • Cylinder: 3
  • Hydraulics
    • Hydraulic Flow: 15.3 gpm
  • Other Features
    • Adjustable Operator Controls
    • Instrument Controls and Gauges
    • Integrated Front and Rear Tie-downs
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$44,641 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41788
MAKE:
Toro
MODEL:
DINGO TX1000W TURBO
FUEL:
Diesel
Location:
New York
  • General Specifications
    • Model Number: DINGO TX1000W TURBO
    • Manufacturer: Toro
    • Type: Forklift
    • Subtype: Earth Moving and Construction
  • Dimensions
    • Length: 105 inches
    • Width: 41 inches
    • Height: 53 inches
    • Ground Clearance: 6 inches
  • Weight
    • Operating Weight: 2,785 lbs
  • Performance
    • Fuel Type: Diesel
    • Travel Speed: 5 mph
    • Operating Capacity: 1,000 lbs
    • Bucket Breakout Force: 2,205 lbs
  • Engine
    • Engine Power: 24.9 HP
    • Cylinder: 3
  • Hydraulics
    • Hydraulic Flow: 15.3 gpm
  • Other Features
    • Adjustable Operator Controls
    • Instrument Controls and Gauges
    • Integrated Front and Rear Tie-downs
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$1,661 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41792
MAKE:
Toro
MODEL:
22342
Location:
New York
  • Manufacturer: Toro
  • Model Number: 22342
  • Type: Forklift
  • Subtype: Earth Moving and Construction
  • Engine
    • Engine Type: Diesel
    • Displacement: 201 cubic inches
    • Power Output: 74.3 HP
    • Cooling System: Liquid-cooled
    • Fuel Capacity: 30 gallons
  • Dimensions
    • Overall Length: 180 inches
    • Overall Width: 80 inches
    • Overall Height: 100 inches
    • Wheelbase: 90 inches
    • Ground Clearance: 14 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: 18 mph
    • Axle Type: Heavy-duty
    • Braking System: Hydraulic
    • Operating Weight: 16,000 lbs
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 12 x 16.5 inches
    • Rear Tire Size: 12 x 16.5 inches
  • Hydraulics
    • Hydraulic System Pressure: 2,500 psi
    • Hydraulic Flow Rate: 23 gallons per minute
    • Hydraulic Pump Type: Gear Pump
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$1,661 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41790
MAKE:
Toro
MODEL:
22342
Location:
New York
  • Manufacturer: Toro
  • Model Number: 22342
  • Type: Forklift
  • Subtype: Earth Moving and Construction
  • Engine
    • Engine Type: Diesel
    • Displacement: 201 cubic inches
    • Power Output: 74.3 HP
    • Cooling System: Liquid-cooled
    • Fuel Capacity: 30 gallons
  • Dimensions
    • Overall Length: 180 inches
    • Overall Width: 80 inches
    • Overall Height: 100 inches
    • Wheelbase: 90 inches
    • Ground Clearance: 14 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: 18 mph
    • Axle Type: Heavy-duty
    • Braking System: Hydraulic
    • Operating Weight: 16,000 lbs
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 12 x 16.5 inches
    • Rear Tire Size: 12 x 16.5 inches
  • Hydraulics
    • Hydraulic System Pressure: 2,500 psi
    • Hydraulic Flow Rate: 23 gallons per minute
    • Hydraulic Pump Type: Gear Pump
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$44,641 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41795
MAKE:
Toro
MODEL:
DINGO TX1000W TURBO
FUEL:
Diesel
Location:
New York
  • General Specifications
    • Model Number: DINGO TX1000W TURBO
    • Manufacturer: Toro
    • Type: Forklift
    • Subtype: Earth Moving and Construction
  • Dimensions
    • Length: 105 inches
    • Width: 41 inches
    • Height: 53 inches
    • Ground Clearance: 6 inches
  • Weight
    • Operating Weight: 2,785 lbs
  • Performance
    • Fuel Type: Diesel
    • Travel Speed: 5 mph
    • Operating Capacity: 1,000 lbs
    • Bucket Breakout Force: 2,205 lbs
  • Engine
    • Engine Power: 24.9 HP
    • Cylinder: 3
  • Hydraulics
    • Hydraulic Flow: 15.3 gpm
  • Other Features
    • Adjustable Operator Controls
    • Instrument Controls and Gauges
    • Integrated Front and Rear Tie-downs
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$1,661 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41789
MAKE:
Toro
MODEL:
22342
Location:
New York
  • Manufacturer: Toro
  • Model Number: 22342
  • Type: Forklift
  • Subtype: Earth Moving and Construction
  • Engine
    • Engine Type: Diesel
    • Displacement: 201 cubic inches
    • Power Output: 74.3 HP
    • Cooling System: Liquid-cooled
    • Fuel Capacity: 30 gallons
  • Dimensions
    • Overall Length: 180 inches
    • Overall Width: 80 inches
    • Overall Height: 100 inches
    • Wheelbase: 90 inches
    • Ground Clearance: 14 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: 18 mph
    • Axle Type: Heavy-duty
    • Braking System: Hydraulic
    • Operating Weight: 16,000 lbs
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 12 x 16.5 inches
    • Rear Tire Size: 12 x 16.5 inches
  • Hydraulics
    • Hydraulic System Pressure: 2,500 psi
    • Hydraulic Flow Rate: 23 gallons per minute
    • Hydraulic Pump Type: Gear Pump
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$44,641 USD
Get Quote
Get Brochure
DETAILS
CONTACT
FINANCE
STK#:
41793
MAKE:
Toro
MODEL:
DINGO TX1000N TURBO
FUEL:
Diesel
Location:
New York
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$44,641 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41794
MAKE:
Toro
MODEL:
DINGO TX1000W TURBO
FUEL:
Diesel
Location:
New York
  • General Specifications
    • Model Number: DINGO TX1000W TURBO
    • Manufacturer: Toro
    • Type: Forklift
    • Subtype: Earth Moving and Construction
  • Dimensions
    • Length: 105 inches
    • Width: 41 inches
    • Height: 53 inches
    • Ground Clearance: 6 inches
  • Weight
    • Operating Weight: 2,785 lbs
  • Performance
    • Fuel Type: Diesel
    • Travel Speed: 5 mph
    • Operating Capacity: 1,000 lbs
    • Bucket Breakout Force: 2,205 lbs
  • Engine
    • Engine Power: 24.9 HP
    • Cylinder: 3
  • Hydraulics
    • Hydraulic Flow: 15.3 gpm
  • Other Features
    • Adjustable Operator Controls
    • Instrument Controls and Gauges
    • Integrated Front and Rear Tie-downs
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
ATP Equipment Exchange Inc.
 
Used
PRICE
$19,850 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
YAL889S
MAKE:
Yale
MODEL:
GLC080VX
MAST TYPE:
Three Stage
MAST - RAISED:
200 in
FUEL:
LP Gas
SIDESHIFTER:
YES
CAPACITY:
8000 lbs
Location:
Illinois
  • General Specifications
    • Model Number: GLC080VX
    • Manufacturer: Yale
    • Type: Forklift
    • Subtype: Electric 4 Wheel Sit Down
  • Powertrain
    • Engine Type: Electric Motor
    • Drive: Dual Front Wheel
    • Battery Voltage: 80V
  • Dimensions
    • Length to Fork Face: 122 inches (varies)
    • Width: 51 inches
    • Height (Overhead Guard): 86 inches
    • Wheelbase: 79 inches
  • Performance
    • Load Capacity: 8000 lbs
    • Travel Speed (Loaded): 11 mph
    • Lifting Speed (Empty): 100 feet per minute
  • Wheels and Tires
    • Front Tires: Pneumatic, 21x8-9
    • Rear Tires: Pneumatic, 16x6-8
  • Operator Features
    • Steering: Hydraulic Power Steering
    • Seat: Adjustable with Suspension
    • Operator Compartment: Ergonomically Designed
  • Safety Features
    • Braking System: Regenerative with Wet Disc Brakes
    • Seat Belt: Retractable
    • Safety Alarms: Reverse Motion Alarm
ATP Equipment Exchange Inc.
Anthony Plazibat: 815-940-4199
303 Mound Rd Bldg 1 Complex 2
Rockdale, IL 60436

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Forklifts Parts & Equipment
 
Used
PRICE
$32,500 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
MAKE:
Toyota
MODEL:
7FDU50
MAST TYPE:
Three Stage
MAST - RAISED:
160 in
FUEL:
Diesel
HOURS:
3647 Hrs
SIDESHIFTER:
YES
CAPACITY:
11000 lbs
Location:
Florida
  • Model Number: 7FDU50
  • Manufacturer: Toyota
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type Used: Diesel
General Specifications
  • Capacity: 11,000 lbs
  • Engine Type: Diesel
  • Turning Radius: 98 inches
  • Overall Width: 58 inches
  • Length to Fork Face: 110 inches
  • Height to Top of Overhead Guard: 87 inches
  • Wheelbase: 74 inches
  • Tread (Front/Rear): 48 inches / 48 inches
Engine
  • Engine Model: Toyota 1KD
  • Engine Power: 60 HP
  • Number of Cylinders: 4
  • Fuel Tank Capacity: 16 gallons
Performance
  • Travel Speed (Unloaded): 12 mph
  • Lifting Speed (Loaded): 100 ft/min
  • Gradeability (Loaded): 30%
Dimensions
  • Fork Length: Varies
  • Free Lift: 7 inches
  • Ground Clearance (Under Mast): 10 inches
Tires
  • Tire Type: Pneumatic
  • Front Tires: 8.25-15-14PR
  • Rear Tires: 8.25-15-14PR
Forklifts Parts & Equipment
Arturo: 786-475-8799
7695 NW 63 St.
Miami, FL 33166

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Forklifts Parts & Equipment
 
Used
PRICE
$31,500 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
MAKE:
Toyota
MODEL:
7FGCU35
MAST TYPE:
Three Stage
MAST - LOWERED:
87 in
MAST - RAISED:
187 in
FUEL:
LP Gas
HOURS:
5795 Hrs
SIDESHIFTER:
YES
CAPACITY:
8000 lbs
Location:
Florida
FULL RECONDITIONED, LOW HOURS, NEW PAINT, NEW TIRES
  • General Information
    • Manufacturer: Toyota
    • Model Number: 7FGCU35
    • Type: Forklift
  • Dimensions
    • Overall Length: 104 inches
    • Overall Width: 48 inches
    • Overall Height to Top Overhead Guard: 86 inches
    • Wheelbase: 70 inches
  • Engine
    • Engine Type: 4-Cylinder Internal Combustion
    • Fuel Type: LPG (Liquid Petroleum Gas)
  • Performance
    • Load Capacity: 7,000 lbs
    • Speed: 13.6 mph (Unladen)
    • Turning Radius: 90 inches
  • Chassis
    • Tire Type: Cushion
    • Front Tire Size: 21 inches
    • Rear Tire Size: 16 inches
  • Hydraulics
    • Pressure: 2,835 psi
    • Hydraulic Flow Rate: 17 gallons per minute
Forklifts Parts & Equipment
Arturo: 786-475-8799
7695 NW 63 St.
Miami, FL 33166
Finance at $/mo
Forklifts Parts & Equipment
 
Used
PRICE
$59,800 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
MAKE:
Cat
MODEL:
DP90
MAST TYPE:
Two Stage
MAST - LOWERED:
120 in
MAST - RAISED:
147 in
FUEL:
Diesel
SIDESHIFTER:
YES
CAPACITY:
20000 lbs
Location:
Florida
  • Manufacturer: Caterpillar (Cat)
  • Model Number: DP90
  • Type: Forklift
  • Fuel Type Used: Diesel
  • Dimensions and Weight
    • Overall Length: Approximately 181 inches
    • Overall Width: 83 inches
    • Overall Height (cab): 119 inches
    • Wheelbase: 108 inches
    • Ground Clearance: Approximately 8 inches
    • Operating Weight: Approximately 31,000 lbs
  • Engine
    • Engine Type: Diesel Engine
    • Gross Power: Approximately 150 HP
    • Cylinders: 6-cylinder
    • Fuel System: Direct Injection
  • Performance
    • Load Capacity: 19,800 lbs
    • Travel Speed: Approximately 20 mph
    • Lift Speed: Approximately 89 feet per minute
    • Gradeability: Approximately 32%
  • Wheels and Tires
    • Tires: Pneumatic
    • Front Tires: 4
    • Rear Tires: 2
  • Brakes
    • Service Brakes: Hydraulic
    • Parking Brakes: Mechanical
  • Hydraulic System
    • Hydraulic Power: Powered by engine
    • Hydraulic Functions: Lift, Steer, Tilt
  • Miscellaneous
    • Fork Length: Varies
    • Steering: Power Steering
Forklifts Parts & Equipment
Arturo: 786-475-8799
7695 NW 63 St.
Miami, FL 33166

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Heavy Lift Sales, Rentals & Leasing
 
Used
PRICE
CALL FOR PRICE
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
4423488
MAKE:
Mitsubishi
MODEL:
FB20NT-AC
MAST TYPE:
Three Stage
MAST - LOWERED:
82 in
MAST - RAISED:
188 in
FUEL:
Electric
SIDESHIFTER:
YES
CAPACITY:
3000 lbs
Location:
New York
SS, 36/48 Volt, 950/770 Amp Hour
  • General Specifications
    • Model Number: FB20NT-AC
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Electric 4 Wheel Sit Down
    • Fuel Type: Electric
  • Dimensions
    • Overall Length: Approximately 124 inches
    • Overall Width: Approximately 42 inches
    • Height to Top of Overhead Guard: Approximately 84 inches
    • Wheelbase: Approximately 57 inches
    • Ground Clearance: Approximately 3.5 inches
  • Performance
    • Load Capacity: 4,000 lbs
    • Drive Motor: AC
    • Travel Speed (laden/unladen): Approximately 9 mph
    • Lift Speed (laden/unladen): Approximately 1 foot per second
    • Battery Voltage: 48V
  • Wheels and Tires
    • Tires: Solid Pneumatic
    • Number of Wheels: 4
    • Front Tire Size: 21 inches
    • Rear Tire Size: 16 inches
  • Forks
    • Fork Length: Varies
  • Operational Details
    • Operator Position: Sit Down
    • Steering: Hydraulic Power Steering
Heavy Lift Sales, Rentals & Leasing
Sales Department: 716-221-2022
1967 Wehrle Dr.
Buffalo, NY 14221
Lee Cassam & Associates
 
Used
PRICE
$59,900 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
MAKE:
Drexel
MODEL:
R60SL-L
MAST TYPE:
Three Stage
MAST - LOWERED:
101 in
MAST - RAISED:
215 in
FUEL:
LP Gas
HOURS:
3347 Hrs
CAPACITY:
6000 lbs
Location:
Texas
LOW HOURS UNIT RENTAL READY
  • Model Number: R60SL-L
  • Manufacturer: Drexel
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type Used: LP Gas
  • General Dimensions:
    • Overall Length: varies based on configuration
    • Overall Width: approximately 48 inches
    • Overall Height to Top of Overhead Guard: roughly 88 inches
  • Lift Capacity:
    • Rated Load Capacity: up to 6,000 lbs
  • Performance:
    • Travel Speed: up to 12 mph
    • Load Center: 24 inches
  • Engine Specifications:
    • Engine Type: Internal Combustion, LPG-powered
    • Cooling System: Liquid-cooled
  • Tires:
    • Tire Type: Pneumatic
    • Number of Tires: 4
  • Other Features:
    • Operator Seat: Adjustable, with safety belt
    • Steering: Power steering
    • Brakes: Hydraulic
Lee Cassam & Associates
Lee Cassam: 817 838 5438
2108 Delante St
Haltom City, TX 76117
Finance at $/mo
L.A. Lift Services
 
Used
PRICE
$5,200 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
WARRANTY
STK#:
U08086
MAKE:
Raymond
MODEL:
112TMFRE
MAST TYPE:
Six inch lift (walkie)
FUEL:
Electric
SIDESHIFTER:
NO
CAPACITY:
6000 lbs
Location:
California
24V
  • General Specifications
    • Model Number: 112TMFRE
    • Manufacturer: Raymond
    • Type: Forklift
    • Subtype: Electric Walkie/Rider Pallet Jack
    • Fuel Type: Electric
  • Power Source
    • Drive Motor: Electric
    • Battery Voltage: 24V
  • Dimensions
    • Overall Length:
    • Overall Width:
    • Height to Top of Headguard:
  • Performance
    • Load Capacity: 4,500 lbs
    • Travel Speed (laden/unladen): 3.1/3.4 mph
    • Lift Speed (laden/unladen):
    • Ground Clearance:
  • Forks
    • Fork Length: Varies
    • Fork Width:
    • Fork Thickness:
  • Wheels and Tires
    • Tire Type: Polyurethane
    • Tire Size (front/rear):
  • Additional Features
    • Operator Position: Stand-on
    • Controls: Hand Operated
L.A. Lift Services
Sales Dept.: 323-621-3686
4368 Bandini Blvd.
Vernon, CA 90058
30 DAY WARRANTY
Finance at $/mo
L.A. Lift Services
 
Used
PRICE
$5,200 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
WARRANTY
STK#:
U08091
MAKE:
Raymond
MODEL:
112TMFRE
MAST TYPE:
Six inch lift (walkie)
FUEL:
Electric
SIDESHIFTER:
NO
CAPACITY:
6000 lbs
Location:
California
24V
  • General Specifications
    • Model Number: 112TMFRE
    • Manufacturer: Raymond
    • Type: Forklift
    • Subtype: Electric Walkie/Rider Pallet Jack
    • Fuel Type: Electric
  • Power Source
    • Drive Motor: Electric
    • Battery Voltage: 24V
  • Dimensions
    • Overall Length:
    • Overall Width:
    • Height to Top of Headguard:
  • Performance
    • Load Capacity: 4,500 lbs
    • Travel Speed (laden/unladen): 3.1/3.4 mph
    • Lift Speed (laden/unladen):
    • Ground Clearance:
  • Forks
    • Fork Length: Varies
    • Fork Width:
    • Fork Thickness:
  • Wheels and Tires
    • Tire Type: Polyurethane
    • Tire Size (front/rear):
  • Additional Features
    • Operator Position: Stand-on
    • Controls: Hand Operated
L.A. Lift Services
Sales Dept.: 323-621-3686
4368 Bandini Blvd.
Vernon, CA 90058
30 DAY WARRANTY
Finance at $/mo
Lee Cassam & Associates
 
Used
PRICE
$6,990 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
MAKE:
Yale
MODEL:
MSW40
MAST TYPE:
Two Stage
MAST - LOWERED:
83 in
MAST - RAISED:
130 in
FUEL:
Electric
HOURS:
2700 Hrs
SIDESHIFTER:
YES
CAPACITY:
4000 lbs
Location:
Texas
WITH SIDE SHIFT 2700 HOURS ON THE UNIT LIKE NEW
  • Manufacturer: Yale
  • Model Number: MSW40
  • Type: Forklift
  • Subtype: Electric Walkie Straddle Stacker
  • Fuel Type: Electric
Performance
  • Load Capacity: 4,000 lbs
  • Travel Speed (laden/unladen): 3.2 mph / 3.4 mph
  • Lift Speed (laden/unladen): 17 ft/min / 28 ft/min
  • Lowering Speed (laden/unladen): 55 ft/min / 32 ft/min
Dimensions
  • Overall Length: 85 to 93 inches
  • Overall Width: 42 inches
  • Overall Height (top of mast lowered): 82 inches
  • Fork Length: Varies
  • Fork Width: 3.5 inches
  • Fork Thickness: 1.4 inches
  • Wheelbase: 50 inches
Power
  • Voltage: 24V
  • Battery Capacity: 270 Ah
  • Charger: Built-in 115V, 60Hz
Weight
  • Service Weight: Approximately 2,775 lbs
Tires
  • Tire Type: Polyurethane
  • Drive Wheel Size: 10 inches
  • Load Wheel Size: 4 inches
Lee Cassam & Associates
Lee Cassam: 817 838 5438
2108 Delante St
Haltom City, TX 76117
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
Used
PRICE
$18,995 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41473
MAKE:
Toro
MODEL:
DINGO TX1000N
FUEL:
Diesel
HOURS:
944 Hrs
Location:
New York
  • General Specifications
    • Model Number: DINGO TX1000N
    • Type: Forklift
    • Subtype: Earth Moving and Construction
    • Manufacturer: Toro
  • Dimensions
    • Overall Length: 105 inches
    • Overall Width: 41 inches
    • Height: 54 inches
    • Weight: 2,610 lbs
    • Ground Clearance: 5.9 inches
  • Engine
    • Engine Type: Diesel
    • Horsepower: 24.9 HP
    • Cylinders: 3
  • Performance
    • Rated Operating Capacity (ROC): 1,000 lbs
    • Ground Speed: 4.7 mph
    • Fuel Capacity: 11.89 gallons
  • Hydraulic System
    • Hydraulic Flow: 15.2 gallons/min
    • System Pressure: 3,335 psi
  • Tires
    • Tire Size: 9 inches
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
Used
PRICE
$31,611 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41652
MAKE:
Toro
MODEL:
DINGO TX1000W
FUEL:
Diesel
HOURS:
855 Hrs
Location:
New York
  • Model Number: DINGO TX1000W
  • Manufacturer: Toro
  • Type: Forklift
  • Subtype: Earth Moving and Construction
  • Fuel Type: Diesel
  • Engine
    • Make: Kubota
    • Model: D902
    • Engine Type: Diesel, 3-cylinder
    • Horsepower: 24.8 HP
  • Performance
    • Rated Operating Capacity: 1,000 lbs
    • Fuel Tank Capacity: 11 gallons
    • Ground Speed: Up to 4.7 mph
  • Dimensions
    • Overall Height: 46 inches
    • Overall Length with Forks: 105 inches
    • Overall Width: 41 inches
    • Weight: 2,610 lbs
  • Hydraulic System
    • Hydraulic Flow: 12 gpm
    • Auxiliary Pressure: 3,000 psi
  • Track System
    • Track Width: 9 inches
    • Track Length: 59 inches
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$22,806 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41602
MAKE:
Toro
MODEL:
ULTRA BUGGY 2500-TS
Location:
New York
  • Engine Specifications
    • Engine Type: Diesel
    • Horsepower: 74 HP
    • Displacement: 3.1 liters
    • Cylinders: 4
    • Cooling System: Liquid Cooled
  • Dimensions
    • Overall Length: 12 feet
    • Overall Width: 5 feet
    • Overall Height: 8 feet
    • Turning Radius: 10 feet
    • Ground Clearance: 1.5 feet
  • Capacity
    • Load Capacity: 5,500 lbs
    • Fuel Tank Capacity: 24 gallons
  • Performance
    • Travel Speed: 14 mph
    • Gradeability: 30%
  • Transmission
    • Type: Hydrostatic
    • Gears: 2 forward / 2 reverse
  • Tires
    • Type: Pneumatic
    • Tire Size: Front 10-16.5, Rear 14-17.5
  • Hydraulics
    • Operating Pressure: 3,000 psi
    • Hydraulic Flow: 20 gallons per minute
  • Forks
    • Fork Length: Varies
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Elite Forklift Service And Repair, Inc.
 
Used
PRICE
$9,500 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
MAKE:
Komatsu
MODEL:
FG25ST-16
MAST TYPE:
Three Stage
MAST - LOWERED:
187 in
MAST - RAISED:
87 in
FUEL:
LP Gas
HOURS:
7049 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
Location:
California
Good running and properly maintained lift. 48” forks.
  • Manufacturer: Komatsu
  • Model Number: FG25ST-16
  • Engine Type: Internal Combustion
  • Fuel Type: LPG (Liquid Petroleum Gas)
  • Capacity and Load Center:
    • Load Capacity: approx. 5,000 lbs
    • Load Center: 24 inches
  • Dimensions:
    • Overall Length (without forks): approx. 104 inches
    • Overall Width: approx. 45 inches
    • Overall Height (overhead guard): approx. 84 inches
    • Wheelbase: approx. 63 inches
    • Ground Clearance: approx. 5 inches
  • Tires:
    • Front Tyres: Pneumatic
    • Rear Tyres: Pneumatic
  • Weight:
    • Operating Weight: varies depending on configuration
  • Powertrain:
    • Engine Power: approx. 50 HP
    • Transmission Type: Powershift
  • Performance:
    • Travel Speed: approx. 11 mph
    • Lifting Speed: varies with load
  • Forks:
    • Length: varies
Elite Forklift Service And Repair, Inc.
Mike Pattison: 909-519-9033
1478 Unit B East Francis St
Ontario, CA 91761
Finance at $/mo
Forklift Pro, Inc.
 
Used
PRICE
$34,950 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
27264
MAKE:
Clark
MODEL:
C75L
MAST TYPE:
Two Stage Full Free
MAST - RAISED:
217 in
HOURS:
3830 Hrs
CAPACITY:
15500 lbs
Location:
North Carolina
  • General Specifications
    • Model Number: C75L
    • Manufacturer: Clark
    • Type: Forklift
  • Engine
    • Engine Type: Diesel
    • Horsepower: 120 HP
    • Displacement: 268 cubic inches
  • Dimensions
    • Overall Length: 187 inches
    • Overall Width: 76 inches
    • Overall Height: 108 inches
    • Ground Clearance: 9 inches
  • Performance
    • Load Capacity: 16500 lbs
    • Travel Speed: 14.3 mph
    • Lifting Speed: 66 feet per minute
    • Turning Radius: 114 inches
  • Wheels and Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 8.25 x 15
    • Rear Tire Size: 6.50 x 10
  • Hydraulic System
    • Hydraulic Pressure: 3,000 psi
    • Hydraulic Tank Capacity: 17 gallons
  • Operator's Cab
    • Seat Type: Adjustable with Suspension
    • Steering: Hydraulic Power Steering
    • Sound Level: 76 dB
  • Fuel System
    • Fuel Tank Capacity: 29 gallons
  • Forks
    • Fork Length: Varies
    • Fork Thickness: 2 inches
    • Fork Width: 6 inches
Forklift Pro, Inc.
Sales Department: 803-205-2979
9801 Industrial Drive
Pineville, NC 28134

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Forklift Pro, Inc.
 
Used
PRICE
$4,950 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
27279
MAKE:
Raymond
MODEL:
750R35TT
MAST TYPE:
Three Stage
MAST - RAISED:
250 in
FUEL:
Electric
HOURS:
6796 Hrs
SIDESHIFTER:
YES
CAPACITY:
3500 lbs
Location:
North Carolina
  • General Information
    • Model Number: 750R35TT
    • Manufacturer: Raymond
    • Type: Forklift
    • Subtype: Electric Narrow Aisle Single Reach
    • Fuel Type: Electric
  • Dimensions
    • Overall Length: Varies
    • Overall Width: Approx. 42 inches
    • Overall Height: Approx. 92 inches
    • Turning Radius: Approx. 59 inches
  • Performance
    • Load Capacity: 3,500 lbs
    • Travel Speed: Approx. 6.5 mph (loaded)
    • Lift Speed: Approx. 60 feet per minute (loaded)
    • Lowering Speed: Approx. 70 feet per minute (loaded)
  • Power Source
    • Battery Voltage: 36 V
    • Battery Capacity: Varies
    • Charger Type: External Charger
  • Operator Environment
    • Ergonomic Controls
    • Adjustable Seats
    • LCD Display for Monitoring
    • Steering Column: Tilt Adjustable
  • Safety Features
    • LED Lighting System
    • Automatic Parking Brake
    • Load Stability System
    • Automatic Speed Reduction
  • Additional Features
    • Reach Functionality
    • Collision Detection System
    • Integrated Data Management
Forklift Pro, Inc.
Sales Department: 803-205-2979
9801 Industrial Drive
Pineville, NC 28134

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$1,661 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41595
MAKE:
Toro
MODEL:
22342
Location:
New York
  • Manufacturer: Toro
  • Model Number: 22342
  • Type: Forklift
  • Subtype: Earth Moving and Construction
  • Engine
    • Engine Type: Diesel
    • Displacement: 201 cubic inches
    • Power Output: 74.3 HP
    • Cooling System: Liquid-cooled
    • Fuel Capacity: 30 gallons
  • Dimensions
    • Overall Length: 180 inches
    • Overall Width: 80 inches
    • Overall Height: 100 inches
    • Wheelbase: 90 inches
    • Ground Clearance: 14 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: 18 mph
    • Axle Type: Heavy-duty
    • Braking System: Hydraulic
    • Operating Weight: 16,000 lbs
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 12 x 16.5 inches
    • Rear Tire Size: 12 x 16.5 inches
  • Hydraulics
    • Hydraulic System Pressure: 2,500 psi
    • Hydraulic Flow Rate: 23 gallons per minute
    • Hydraulic Pump Type: Gear Pump
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$1,661 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41596
MAKE:
Toro
MODEL:
22342
Location:
New York
  • Manufacturer: Toro
  • Model Number: 22342
  • Type: Forklift
  • Subtype: Earth Moving and Construction
  • Engine
    • Engine Type: Diesel
    • Displacement: 201 cubic inches
    • Power Output: 74.3 HP
    • Cooling System: Liquid-cooled
    • Fuel Capacity: 30 gallons
  • Dimensions
    • Overall Length: 180 inches
    • Overall Width: 80 inches
    • Overall Height: 100 inches
    • Wheelbase: 90 inches
    • Ground Clearance: 14 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: 18 mph
    • Axle Type: Heavy-duty
    • Braking System: Hydraulic
    • Operating Weight: 16,000 lbs
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 12 x 16.5 inches
    • Rear Tire Size: 12 x 16.5 inches
  • Hydraulics
    • Hydraulic System Pressure: 2,500 psi
    • Hydraulic Flow Rate: 23 gallons per minute
    • Hydraulic Pump Type: Gear Pump
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$3,945 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41594
MAKE:
Toro
MODEL:
22805
Location:
New York
  • Model: Toro 22805
  • Type: Forklift
  • Subtype: Earth Moving and Construction
  • Engine Specifications:
    • Engine Type: Diesel
    • Number of Cylinders: 4
    • Power Output: 74 HP
    • Displacement: 195 cu in
    • Fuel Capacity: 20 gal
    • Cooled: Liquid Cooled Engine
  • Performance:
    • Load Capacity: 5,000 lbs
    • Travel Speed: 12 mph
    • Operating Weight: 10,500 lbs
  • Dimensions:
    • Overall Length: 10 ft
    • Overall Width: 5.5 ft
    • Overall Height: 8 ft
    • Wheelbase: 6 ft
    • Ground Clearance: 1 ft
  • Fork Specifications:
    • Fork Length: Varies
    • Fork Spread: 4 ft
  • Operational Features:
    • Steering: Power Steering
    • Brakes: Hydraulic Wet Disc
    • Transmission: Hydrostatic
  • Tires:
    • Standard Tires: Pneumatic
    • Tire Size: Front - 28 x 9-15, Rear - 6.50 x 10
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$1,661 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41598
MAKE:
Toro
MODEL:
22342
Location:
New York
  • Manufacturer: Toro
  • Model Number: 22342
  • Type: Forklift
  • Subtype: Earth Moving and Construction
  • Engine
    • Engine Type: Diesel
    • Displacement: 201 cubic inches
    • Power Output: 74.3 HP
    • Cooling System: Liquid-cooled
    • Fuel Capacity: 30 gallons
  • Dimensions
    • Overall Length: 180 inches
    • Overall Width: 80 inches
    • Overall Height: 100 inches
    • Wheelbase: 90 inches
    • Ground Clearance: 14 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: 18 mph
    • Axle Type: Heavy-duty
    • Braking System: Hydraulic
    • Operating Weight: 16,000 lbs
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 12 x 16.5 inches
    • Rear Tire Size: 12 x 16.5 inches
  • Hydraulics
    • Hydraulic System Pressure: 2,500 psi
    • Hydraulic Flow Rate: 23 gallons per minute
    • Hydraulic Pump Type: Gear Pump
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Niagara Frontier Equipment Sales, Inc.
 
New
PRICE
$44,641 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41592
MAKE:
Toro
MODEL:
DINGO TX1000W TURBO
FUEL:
Diesel
Location:
New York
  • General Specifications
    • Model Number: DINGO TX1000W TURBO
    • Manufacturer: Toro
    • Type: Forklift
    • Subtype: Earth Moving and Construction
  • Dimensions
    • Length: 105 inches
    • Width: 41 inches
    • Height: 53 inches
    • Ground Clearance: 6 inches
  • Weight
    • Operating Weight: 2,785 lbs
  • Performance
    • Fuel Type: Diesel
    • Travel Speed: 5 mph
    • Operating Capacity: 1,000 lbs
    • Bucket Breakout Force: 2,205 lbs
  • Engine
    • Engine Power: 24.9 HP
    • Cylinder: 3
  • Hydraulics
    • Hydraulic Flow: 15.3 gpm
  • Other Features
    • Adjustable Operator Controls
    • Instrument Controls and Gauges
    • Integrated Front and Rear Tie-downs
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo
Dietrich Brothers Inc
 
Used
PRICE
CALL FOR PRICE
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
3010
MAKE:
Taylor
MODEL:
THC-300M
MAST TYPE:
Two Stage
MAST - RAISED:
96 in
FUEL:
LP Gas
HOURS:
4915 Hrs
SIDESHIFTER:
YES
CAPACITY:
30000 lbs
Location:
North Carolina
30,000lbs @ 36" load center , side shift and fork positioner
  • Model Number: THC-300M
  • Manufacturer: Taylor
  • Type: Forklift
  • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
  • Fuel Type: LP Gas
  • Dimensions
    • Overall Length: Varies
    • Overall Width: 4.5 feet
    • Overall Height: 8 feet
  • Weight
    • Service Weight: 15,000 lbs
    • Axle Load, Unladen (Front/Rear): 7,000 lbs / 8,000 lbs
  • Performance
    • Rated Capacity: 30,000 lbs
    • Travel Speed, Unladen: 12 mph
    • Lifting Speed, Laden: 50 feet per minute
    • Lowering Speed, Laden: 55 feet per minute
    • Turning Radius: 10 feet
  • Engine
    • Engine Type: LPG Engine
    • Displacement: 350 cubic inches
    • Engine Power: 100 HP
  • Tires
    • Tire Type: Cushion
    • Front Tire Size: 28 x 10 x 22 inches
    • Rear Tire Size: 28 x 12 x 22 inches
Dietrich Brothers Inc
Jurgen Dietrich: 336-439-1486
1425 Brittney Ln
Burlington, NC 27215
Burwell Material Handling
 
Used
PRICE
$29,000 USD
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
WARRANTY
STK#:
EQ0123906
MAKE:
Hyundai
MODEL:
30D-9
MAST TYPE:
Three Stage
MAST - LOWERED:
87 in
MAST - RAISED:
185 in
FUEL:
Diesel
HOURS:
2984 Hrs
SIDESHIFTER:
YES
CAPACITY:
6000 lbs
Location:
Louisiana
2018 YR HYUNDAI 30D-9 TRIPLE MAST SSFP 72" FORKS.
  • General Specifications
    • Model: 30D-9
    • Manufacturer: Hyundai
    • Type: Diesel Forklift
  • Engine
    • Engine Model: Diesel Engine (Exact version varies by configuration)
    • Rated Power: Approximately 72.1 HP (54 kW)
  • Performance
    • Load Capacity: Approximately 6,000 lbs
    • Travel Speed (unloaded): Up to 12.4 mph
  • Dimensions
    • Overall Length (without forks): Approximately 116 inches
    • Overall Width: Approximately 47 inches
    • Overall Height (to top of overhead guard): Approximately 85 inches
    • Turning Radius: Approximately 98 inches
    • Fork Length: Varies
    • Wheelbase: Approximately 71 inches
  • Tires
    • Front Tires: Pneumatic
    • Rear Tires: Pneumatic
  • Weights
    • Service Weight: Approximately 10,360 lbs
#5103 St Rose Louisiana
Marc Alford: (504)487-4914
10299 Airline HWY
St Rose, LA 70087
30 Days Carriage to Counterweight Warranty
Finance at $/mo
MH Equipment Company
 
Used
PRICE
CALL FOR PRICE
Get Quote
Get Brochure
DETAILS
DESCRIPTION
SPECS
CONTACT
WARRANTY
STK#:
EQ0195767
MAKE:
Hyster
MODEL:
E80XN
MAST TYPE:
Two Stage
MAST - LOWERED:
121 in
MAST - RAISED:
84 in
FUEL:
Electric
HOURS:
4021 Hrs
CAPACITY:
8000 lbs
Location:
Kentucky
Unit has four way to carriage. No attachment
  • General Specifications
    • Model Number: E80XN
    • Manufacturer: Hyster
    • Type: Forklift
    • Fuel Type: Electric
  • Dimensions
    • Overall Length: Approximately 139 inches
    • Overall Width: 55 inches
    • Wheelbase: About 80 inches
    • Ground Clearance: 4.7 inches
  • Capacity
    • Load Capacity: 8,000 lbs
    • Load Center: 24 inches
  • Performance
    • Travel Speed: Approximately 10.6 mph (laden)
    • Turning Radius: 93 inches
  • Powertrain
    • Motor Type: Electric
    • Battery Voltage: 80V
  • Tires
    • Front Tires: Cushion
    • Rear Tires: Cushion
  • Fork Specifications
    • Fork Length: Varies
  • Operator Environment
    • Adjustable Steering Column
    • Ergonomic Seat
    • Dash-Mounted Display Panel
MH Equipment Company
Gresham Carter: 502-385-2599
3306 Gilmore Industrial Blvd
Louisville, KY 40213
All units are sold as-is with no warranty. Batteries unless otherwise stated are not warrantied and are as is.
Niagara Frontier Equipment Sales, Inc.
 
Used
PRICE
$18,995 USD
Get Quote
Get Brochure
DETAILS
SPECS
CONTACT
FINANCE
STK#:
41803
MAKE:
Toro
MODEL:
DINGO TX1000N
FUEL:
Diesel
HOURS:
847 Hrs
Location:
New York
  • General Specifications
    • Model Number: DINGO TX1000N
    • Type: Forklift
    • Subtype: Earth Moving and Construction
    • Manufacturer: Toro
  • Dimensions
    • Overall Length: 105 inches
    • Overall Width: 41 inches
    • Height: 54 inches
    • Weight: 2,610 lbs
    • Ground Clearance: 5.9 inches
  • Engine
    • Engine Type: Diesel
    • Horsepower: 24.9 HP
    • Cylinders: 3
  • Performance
    • Rated Operating Capacity (ROC): 1,000 lbs
    • Ground Speed: 4.7 mph
    • Fuel Capacity: 11.89 gallons
  • Hydraulic System
    • Hydraulic Flow: 15.2 gallons/min
    • System Pressure: 3,335 psi
  • Tires
    • Tire Size: 9 inches
Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Finance at $/mo

Other Toro 42"bucket Listings

Forklift FAQ

What is the maximum lifting capacity of a forklift?

The maximum lifting capacity of a forklift typically ranges from 3,000 lbs to 80,000 lbs, depending on the model and specifications. It's important to check the manufacturer's guidelines to ensure safe handling of loads that match the forklift's rated capacity.

What types of forklifts are available in the market?

There are several types of forklifts available, including electric forklifts, internal combustion forklifts (gasoline, diesel, or propane), narrow aisle forklifts, and rough terrain forklifts. Each type is designed for specific applications and environments, so it's crucial to choose the right one based on your material handling needs.

How do I maintain a forklift to ensure its longevity?

Regular maintenance is key to prolonging the life of a forklift. This includes daily checks of fluid levels, inspecting tires for wear, ensuring safety equipment is functioning, and following a scheduled service interval for more in-depth mechanical checks. Always refer to the manufacturer's maintenance guidelines for best practices.

What safety features should I look for in a forklift?

When purchasing a forklift, look for safety features such as an anti-tip mechanism, load backrest extensions, seat belts, and clear visibility from the operator's seat. Additionally, consider models that include alarms for overloading and lights for better visibility in low-light conditions.

Your location is Columbus, OH. Modify

Equipment Finder Equipment
finder
Change Search Filters