Taylor material handling equipment is distinguished by its robust construction and longevity, designed to perform effectively in heavy-duty environments such as ports, steel mills, and other demanding industries. The brand emphasizes durability, with a focus on reinforced components and dependable hydraulics, providing exceptional lifting capacities and operational reliability. Taylor equipment often incorporates advanced technology for enhanced precision and safety, catering to the specific needs of their clients through customizable solutions. Additionally, Taylor's commitment to customer support and service ensures that their equipment remains a preferred choice for businesses seeking reliable performance and low maintenance downtime.
Overall Height (Without mast): Approximately 15 feet
Ground Clearance: Approximately 1.5 feet
Capacity
Load Capacity: 95,000 lbs
Powertrain
Engine Type: Diesel
Engine Manufacturer: Depending on specific configuration
Transmission Type: Powershift
Drive: 2 Wheel Drive (2WD)
Performance
Travel Speed (Loaded): Approximately 15 mph
Travel Speed (Unloaded): Approximately 19 mph
Lift Speed (Loaded): Approximately 63 feet/min
Lift Speed (Unloaded): Approximately 73 feet/min
Tires
Tire Type: Pneumatic
Number of Tires: 4
Tire Size (Front): Varies
Tire Size (Rear): Varies
Fork Specifications
Fork Length: Varies
Fork Width: Approximately 10 inches
Fork Thickness: Approximately 3 inches
Additional Features
Operator's Cabin: Enclosed with standard features
Hydraulics: Servo-controlled hydraulics system
Steering: Power steering
Hamre Equipment Co. Inc. Lee Hamre: 530-918-4445 3930 Esplanade Chico, CA 95973
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Displacement: 8.3 L (approximately 507 cubic inches)
Dimensions
Overall Length: Approximately 250 inches
Overall Width: Approximately 96 inches
Overall Height: Approximately 135 inches
Capacity
Load Capacity: Approximately 22,000 lbs
Performance
Travel Speed: Approximately 15 MPH
Lift Speed: Approximately 0.6 ft/s
Gradeability: Approximately 20%
Operational
Tires: Pneumatic
Steering: Power Steering
Brakes
Braking System: Hydraulic
Forks
Fork Length: Varies
Hamre Equipment Co. Inc. Lee Hamre: 530-918-4445 3930 Esplanade Chico, CA 95973
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length (less forks): Approximately 30 feet
Overall Height: Varies based on configuration
Turning Radius: Approximately 25 feet
Performance
Load Capacity: 97,000 lb
Travel Speed (Unloaded): Up to 20 mph
Lifting Speed (Loaded): Approximately 50 feet/min
Engine
Type: Diesel
Horsepower: Approximately 365 HP
Displacement: Varies
Transmission
Type: Power Shift
Speeds: 3 forward / 3 reverse
Tires
Type: Pneumatic
Front Tire Size: Varies
Rear Tire Size: Varies
Hydraulic System
System Pressure: Approximately 4,500 psi
Hydraulic Tank Capacity: Around 70 gallons
Fuel System
Fuel Tank Capacity: Approximately 180 gallons
Brakes
Service Brake: Wet Disc
Parking Brake: Spring Applied, Hydraulically Released
Cab
Operator Environment: Ergonomically designed with adjustable seat
Controls: Joystick and pedal controls
Hamre Equipment Co. Inc. Lee Hamre: 530-918-4445 3930 Esplanade Chico, CA 95973
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
1996 Taylor TEC950L
LOADED CONTAINER HANDLER
5 high stacking
Model Information
Model Number: TEC950L
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Engine
Fuel Type: Diesel
Engine Power: Approximately 160 HP
Displacement: 8.3 L (approximately 507 cubic inches)
Dimensions
Overall Length: Approximately 250 inches
Overall Width: Approximately 96 inches
Overall Height: Approximately 135 inches
Capacity
Load Capacity: Approximately 22,000 lbs
Performance
Travel Speed: Approximately 15 MPH
Lift Speed: Approximately 0.6 ft/s
Gradeability: Approximately 20%
Operational
Tires: Pneumatic
Steering: Power Steering
Brakes
Braking System: Hydraulic
Forks
Fork Length: Varies
AHP Enterprises Arthur Peagler: 912-289-8980 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Hydraulic Pump Capacity: Approximately 100 gallons per minute
Working Pressure: Approximately 4,000 psi
Cab
Operator's Cab: Ergonomic with climate control
Visibility: 360-degree visibility with wide windows
Noise Level: Noise-insulated design for reduced operator fatigue
Carolina-Georgia Services Company Larry Jenkins: 404-531-7680 4201 Elizabeth St NE Covington, GA 30014-2850
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 37-40 feet (varies based on configuration and attachments)
Overall Width: About 12 feet
Wheelbase: Approximately 20-22 feet
Ground Clearance: Roughly 1.5 feet
Performance
Rated Load Capacity: 99,000 pounds
Travel Speed (Loaded): Up to 21 mph
Travel Speed (Unloaded): Up to 24 mph
Turning Radius: Approximately 28 feet
Fuel Tank Capacity: Around 160 gallons
Operational Features
Brake System: Wet Disc Brakes
Steering: Articulated Power Steering
Hydraulic System: Load-sensing hydraulic system
Cab Features
Operator Seat: Adjustable with suspension
Controls: Joystick control for lift and tilt functions
Cabin: Soundproof and climate-controlled
Safety Features
Load Sensing and Height Monitoring Systems
Reverse Alarm
LED Work Lights
Emergency Stop Buttons
K.T. Graham Inc. Keith Graham: 717-647-5577 137 S Front St Columbia, PA 17512
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length (less forks): Approximately 30 feet
Overall Height: Varies based on configuration
Turning Radius: Approximately 25 feet
Performance
Load Capacity: 97,000 lb
Travel Speed (Unloaded): Up to 20 mph
Lifting Speed (Loaded): Approximately 50 feet/min
Engine
Type: Diesel
Horsepower: Approximately 365 HP
Displacement: Varies
Transmission
Type: Power Shift
Speeds: 3 forward / 3 reverse
Tires
Type: Pneumatic
Front Tire Size: Varies
Rear Tire Size: Varies
Hydraulic System
System Pressure: Approximately 4,500 psi
Hydraulic Tank Capacity: Around 70 gallons
Fuel System
Fuel Tank Capacity: Approximately 180 gallons
Brakes
Service Brake: Wet Disc
Parking Brake: Spring Applied, Hydraulically Released
Cab
Operator Environment: Ergonomically designed with adjustable seat
Controls: Joystick and pedal controls
Hamre Equipment Co. Inc. Lee Hamre: 530-918-4445 3930 Esplanade Chico, CA 95973
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Tire Type: Pneumatic or solid, depending on model customization
Cabin Features:
Design: Ergonomic, with good visibility
Climate Control: Available heating and air conditioning options
Instrumentation: Modern display with real-time diagnostics and performance data
Safety Features:
Load Sensing System
Emergency Stop Button
Stability Control Systems
AHP Enterprises Arthur Peagler: 912-289-8980 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Oldie but goody in excellent running condition 18’ mast
Model: TEB250 M
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel
Engine Specifications
Engine Type: Diesel Engine
Horsepower: Approximately 173 hp
Displacement: Approximately 7.0 liters
Number of Cylinders: 6
Dimensions and Weight
Overall Width: Approximately 9 feet
Overall Length (with forks): Varies
Overall Height: Approximately 12 feet
Wheelbase: Approximately 10 feet
Operating Weight: Approximately 78,000 lbs
Performance
Rated Capacity: Approximately 55,000 lbs
Travel Speed: Approximately 15 mph
Tires
Tire Type: Pneumatic
Number of Tires: 4
Additional Features
Hydraulic System
Power Steering
Operator Comfort Seat
AHP Enterprises Arthur Peagler: 912-289-8980 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close