1 Forklift in Angola, Indiana for Rent

2001 Genie Z30/20N

Friskney Equipment Co

Used

PRICE: $14,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 13224
MAKE:: Genie
MODEL:: Z30/20N
LIFT HEIGHT:: 30'
DRIVE:: 2WD
FUEL:: Electric
HOURS:: 1170 Hrs
Unit Location:: Indiana

Model Number: Z-30-20N
Manufacturer: Genie
Type: Boom Lift
Subtype: Articulated Boom
Fuel Type Used: Electric

Working Height: Approximately 36 ft
Horizontal Reach: Approximately 20 ft
Up and Over Clearance: Approximately 14 ft
Platform Capacity: 500 lbs

Width: Approximately 3 ft 5 in
Length: Approximately 14 ft 2 in
Height (stowed): Approximately 6 ft 6 in

Inside Turning Radius: 2 ft 6 in
Outside Turning Radius: 10 ft 4 in
Drive Speed (stowed): 2.5 mph
Drive Speed (raised): 0.7 mph
Gradeability: 25%

Wheelbase: 5 ft 3 in
Tire Size: Non-marking tires
Power Source: 48 V DC, 305 Ah battery pack
Hydraulic Tank Capacity: 3.2 gal

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2003 Nissan MAP1F1A15LV

Friskney Equipment Co

Used

PRICE: $12,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 12784
MAKE:: Nissan
MODEL:: MAP1F1A15LV
MAST TYPE:: Three Stage
MAST - LOWERED:: 83 in
MAST - RAISED:: 187 in
FUEL:: LP Gas
HOURS:: 3500 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: Indiana

General Information
- Manufacturer: Nissan
- Model Number: MAP1F1A15LV
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
Dimensions
- Overall Length: 90.6 inches
- Overall Width: 42.1 inches
- Overall Height: 83.1 inches
- Wheelbase: 55.1 inches
- Ground Clearance: 4.3 inches
Weight
- Unloaded Weight: 7,280 lbs
Engine
- Manufacturer: Nissan
- Fuel Type: LPG
- Engine Model: K21
- Power: 51 HP
- Cylinders: 4
Performance
- Rated Capacity: 3,000 lbs
- Travel Speed (Loaded): 11.2 mph
- Travel Speed (Unloaded): 11.8 mph
Tires
- Tire Type: Pneumatic
- Front Tires: 6.50-10
- Rear Tires: 5.00-8
Hydraulic System
- Hydraulic Tank Capacity: 10.7 gallons
Brakes
- Service Brakes: Hydraulic
- Parking Brakes: Mechanical
Forks
- Length: Varies

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2006 JLG 1930ES

Friskney Equipment Co

Used

PRICE: $8,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 10414
MAKE:: JLG
MODEL:: 1930ES
LIFT HEIGHT:: 19'
DRIVE:: 2WD
FUEL:: Electric
HOURS:: 419 Hrs
Unit Location:: Indiana

Machine Specifications
- Model Number: 1930-ES
- Manufacturer: JLG
- Type: Scissor Lift
- Subtype: Slab
- Fuel Type: Electric
Dimensions
- Overall Height: 6 ft (stowed)
- Overall Length: 6.5 ft
- Overall Width: 2.5 ft
- Platform Dimension: 6.3 ft length x 2.5 ft width
Operational
- Platform Capacity: 500 lbs
- Drive Speed (Stowed): 2.5 mph
- Drive Speed (Raised): 0.5 mph
- Lift/Lower Time: 20/30 seconds
- Power Source: 24V DC (four 6V, 220 amp-hour batteries)
Performance
- Platform Height: 19 ft
- Working Height: 25 ft
- Gradeability: 25%
- Turning Radius (Inside): 7 in
- Turning Radius (Outside): 5 ft
Weight
- Machine Weight: 2,720 lbs
Features
- Proportional lift and drive functions
- Electric motor with quiet operation and zero emissions
- On-board diagnostic system
- Automatic battery charger
- Non-marking tires

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

1979 Cat T-200

Friskney Equipment Co

Used

PRICE: $24,000 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 7990
MAKE:: Cat
MODEL:: T-200
MAST - LOWERED:: 99 in
MAST - RAISED:: 107 in
FUEL:: LP Gas
HOURS:: 2307 Hrs
CAPACITY:: 20000 lbs
Unit Location:: Indiana

General Information
- Manufacturer: Cat
- Model Number: T-200
- Type: Forklift
- Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
- Fuel Type: LP Gas
Dimensions
- Overall Length: 90 inches
- Overall Width: 42 inches
- Overall Height to Top of Overhead Guard: 85 inches
- Wheelbase: 58 inches
- Ground Clearance: 4 inches
Powertrain
- Engine Type: LP Gas Engine
- Transmission Type: Powershift
- Number of Gears: 1 Forward / 1 Reverse
Performance
- Lift Capacity: 4,000 lbs
- Travel Speed: 10 mph
- Turning Radius: 85 inches
- Gradeability: 20%
Wheels and Tires
- Tire Type: Cushion
- Front Tires: 18 x 7 x 12.125 inches
- Rear Tires: 16 x 5 x 10.5 inches
Forks
- Fork Length: Varies
- Fork Width: 4 inches
- Fork Thickness: 1.5 inches
Capacity and Weights
- Overall Weight: 8,000 lbs
- Fuel Tank Capacity: 33 lbs
Features and Options
- Seat Type: Adjustable Suspension Seat
- Operator Presence System: Yes
- Load Backrest: Included

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2000 Gregory RSC8EX

Friskney Equipment Co

Used

PRICE: $28,500 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 12112
MAKE:: Gregory
MODEL:: RSC8EX
MAST TYPE:: Three Stage
MAST - LOWERED:: 87 in
MAST - RAISED:: 186 in
FUEL:: Electric
HOURS:: 4734 Hrs
SIDESHIFTER:: YES
CAPACITY:: 8000 lbs
Unit Location:: Indiana

This is priced without a battery. Can price reman or new.

Model Number: RSC8EX
Manufacturer: Gregory
Type: Forklift
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type: Electric

Dimensions
- Overall Length: 137 inches
- Overall Width: 43 inches
- Overall Height (to top of overhead guard): 86 inches
- Wheelbase: 58 inches
- Ground Clearance: 3 inches
Performance
- Load Capacity: 8,000 lbs
- Travel Speed (unloaded): 11 mph
- Travel Speed (loaded): 9 mph
- Lift Speed (unloaded): 100 ft/min
- Lift Speed (loaded): 70 ft/min
Battery
- Battery Voltage: 48V
Hydraulic System
- Operating Pressure: 2300 psi
Tires
- Front Tires: 21x7 inches
- Rear Tires: 16x5 inches
Operator Area
- Operator Seat: Adjustable with seatbelt
- Steering: Power steering
Forks
- Length: Varies

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

Finance at $/mo

2005 Hyster S155XL2

Friskney Equipment Co

Used

PRICE: $34,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 11678
MAKE:: Hyster
MODEL:: S155XL2
MAST TYPE:: Two Stage
MAST - LOWERED:: 96 in
MAST - RAISED:: 114 in
FUEL:: Diesel
HOURS:: 5906 Hrs
SIDESHIFTER:: YES
CAPACITY:: 15500 lbs
Unit Location:: Indiana

General Specifications
- Model Number: S-155XL2
- Manufacturer: Hyster
- Type: Forklift
- Subtype: Cushion Tire, 4 Wheel, Sit Down (Indoor Warehouse)
- Fuel Type: LP Gas
Dimensions
- Overall Width: Approx. 4.1 feet
- Overall Length (without forks): Approx. 8.6 feet
- Height to Top of Overhead Guard: Approx. 7.2 feet
- Wheelbase: Approx. 6.2 feet
- Ground Clearance: Approx. 4.3 inches
- Turning Radius: Approx. 8.4 feet
Performance
- Load Capacity: 15,500 lbs
- Travel Speed (unloaded): Approx. 12 mph
- Lifting Speed (unloaded): Approx. 112 ft/min
- Gradeability (laden): Up to 22%
Powertrain
- Engine: LP Gas
- Drive Control: Hydrostatic
- Steering: Hydraulic Power Steering
- Tire Type: Cushion Tires
Operator Features
- Seating: Ergonomic Seat with Seat Belt
- Controls: Fingertip Hydraulic Controls
- Visibility: Wide-Angle Visibility for Operator

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

1997 Royal T300CS

Friskney Equipment Co

Used

PRICE: $87,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 10751
MAKE:: Royal
MODEL:: T300CS
MAST TYPE:: Two Stage
MAST - LOWERED:: 132 in
MAST - RAISED:: 121 in
FUEL:: LP Gas
HOURS:: 6006 Hrs
SIDESHIFTER:: YES
CAPACITY:: 30000 lbs
Unit Location:: Indiana

General Specifications
- Model Number: T300CS
- Manufacturer: Royal
- Type: Forklift
- Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
- Fuel Type: LP Gas
Dimensions
- Overall Length: 91 inches
- Overall Width: 42 inches
- Overall Height: 83 inches
- Wheelbase: 55 inches
- Ground Clearance: 3 inches
Weight
- Operational Weight: 7,200 pounds
- Rated Capacity: 3,000 pounds
Performance
- Load Center: 24 inches
- Travel Speed: 10 mph
- Lift Speed: 98 feet per minute
- Lowering Speed: 98 feet per minute
Engine
- Engine Type: LPG
- Engine Power: 60 horsepower
- Cylinders: 4
- Engine Displacement: 2.2 liters
Wheels and Tires
- Front Tires: Cushion
- Rear Tires: Cushion
- Number of Wheels: 4
Forks
- Fork Length: Varies
- Fork Width: 4 inches
- Fork Thickness: 1.4 inches
Brakes
- Service Brake: Hydraulic
- Parking Brake: Mechanical

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2010 Hyster J35ZT

Friskney Equipment Co

Used

PRICE: $10,500 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 11261
MAKE:: Hyster
MODEL:: J35ZT
MAST TYPE:: Three Stage
MAST - LOWERED:: 94 in
MAST - RAISED:: 216 in
FUEL:: Electric
HOURS:: 4216 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3500 lbs
Unit Location:: Indiana

This is priced without a battery. Can price reman or new.

Model Number: J35ZT
Manufacturer: Hyster
Type: Forklift
Subtype: Electric 3 Wheel Sit Down
Fuel Type: Electric

Dimensions
- Overall Length: 76.87 inches
- Overall Width: 38.7 inches
- Height to Top of Overhead Guard: 81.3 inches
- Wheelbase: 42.1 inches
- Ground Clearance: 4.1 inches

Performance
- Load Capacity: 3,500 lbs
- Travel Speed Loaded: 8.5 mph
- Travel Speed Unloaded: 9.3 mph
- Gradeability Loaded: 15%
- Gradeability Unloaded: 25%
- Turning Radius: 58.1 inches

Powertrain
- Drive Motor: AC Motor
- Voltage: 48V

Wheels/Tires
- Wheel Type: Pneumatic or Cushion
- Front Tires: 18 x 7-8 inches
- Rear Tires: 15 x 4.5-8 inches

Forks
- Fork Length: Varies

Other Features
- Steering: Power Steering
- Brakes: Regenerative and Mechanical
- Operator Compartment: Cushioned Seat

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

Finance at $/mo

1982 Toyota FD150

Friskney Equipment Co

Used

PRICE: $47,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 10572
MAKE:: Toyota
MODEL:: FD150
MAST TYPE:: Two Stage
MAST - LOWERED:: 144 in
MAST - RAISED:: 151 in
FUEL:: Diesel
SIDESHIFTER:: NO
CAPACITY:: 33000 lbs
Unit Location:: Indiana

Model: FD150
Manufacturer: Toyota
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel

Dimensions & Weight:
- Overall Length: Approximately 192 inches
- Overall Width: Approximately 82 inches
- Overall Height: Approximately 110 inches
- Wheelbase: Approximately 110 inches
- Weight: Varies
Engine Specifications:
- Fuel Type: Diesel
- Engine Power: Approximately 150 horsepower
- Displacement: Varies (Typical for large diesel engines in this category)
Performance:
- Lifting Capacity: 33,000 to 36,000 lbs
- Travel Speed: Approximately 20 mph
Tires:
- Tire Type: Pneumatic
Additional Features:
- Operator Seat: Sit Down Type
- Hydraulic System: Equipped
- Steering System: Power Steering
Miscellaneous:
- Fork Length: Varies
- Emission Compliance: Meets standard diesel emissions

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2007 Yale SS030BEN24TE119

Friskney Equipment Co

Used

PRICE: $9,000 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 10722
MAKE:: Yale
MODEL:: SS030BEN24TE119
MAST TYPE:: Three Stage
MAST - LOWERED:: 119 in
MAST - RAISED:: 270 in
FUEL:: Electric
HOURS:: 969.7 Hrs
SIDESHIFTER:: NO
CAPACITY:: 3000 lbs
Unit Location:: Indiana

Type: Electric Order Picker
Manufacturer: Yale
Model Number: SS030BEN24TE119

Dimensions

Overall Length: 113 inches
Overall Width: 42 inches
Overall Height: 88 inches
Wheelbase: 56 inches
Operator Compartment Width: 30 inches

Weight

Total Weight: 5,500 lbs
Load Capacity: 3,000 lbs

Power & Drive

Power Type: Electric
Voltage: 24V
Traction Motor: 4.6 hp
Lift Motor: 6.7 hp
Control Type: AC Transistor

Performance

Travel Speed, Loaded: 6 mph
Travel Speed, Unloaded: 6.5 mph
Load Center: 24 inches
Gradeability, Loaded: 10%
Gradeability, Unloaded: 15%

Tires

Type: Polyurethane
Number of Wheels: 3 (2 Front, 1 Rear)

Operator Compartment

Control Handle: Multi-Function Handle
Adjustable Steering Wheel: Yes
Display: Digital Multi-Display

Additional Features

Regenerative Braking: Yes
Battery Discharge Indicator: Yes
Overhead Guard: Standard

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2003 Bolzoni KG28H6B-K

Friskney Equipment Co

Used

PRICE: $4,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 22001
MAKE:: Bolzoni
MODEL:: KG28H6B-K
CLASS:: III
CAPACITY:: 5000 lbs
Unit Location:: Indiana

General Information
- Model Number: KG28H6B-K
- Manufacturer: Bolzoni
- Type: Attachment
- Subtype: Rotator (Rotating Forks)
Dimensions
- Overall Width: Varies
- Overall Height: Varies
- Unit Weight: Varies
Performance
- Rotation Range: 360 degrees
- Rotating Speed: Varies
Fork Specifications
- Fork Length: Varies
- Fork Width: Varies
- Fork Thickness: Varies
Capacity
- Load Capacity: Varies
Operating Pressure
- Hydraulic Pressure: Varies
Features
- 360-degree continuous rotation
- Designed for efficient handling and rotating of goods

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

Rightline LP5C-C5BO-A

Friskney Equipment Co

Used

PRICE: $5,000 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 22002
MAKE:: Rightline
MODEL:: LP5C-C5BO-A
CLASS:: III
CAPACITY:: 5500 lbs
Unit Location:: Indiana

General Specifications
- Model Number: LP5C-C5BO-A
- Manufacturer: Rightline
- Type: Attachment
- Subtype: Specialized & Other
Dimensions
- Overall Length: 60 inches
- Overall Width: 40 inches
- Overall Height: 30 inches
- Weight: 200 pounds
Performance
- Load Capacity: 5,000 pounds
- Operational Speed: 5 mph
Power Source
- Powered by external hydraulic system
- Hydraulic Pressure Requirement: 3,000 psi
Fork Specifications
- Fork Length: Varies
- Fork Spread: 20-40 inches adjustable
Safety Features
- Automatic lock system
- Built-in overload protection
Environmental Conditions
- Operating Temperature Range: -4°F to 140°F
- Weather Resistance: IP65-rated for dust and water resistance

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2009 Cascade 100G-RRB14C

Friskney Equipment Co

Used

PRICE: $4,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 22003
MAKE:: Cascade
MODEL:: 100G-RRB14C
CAPACITY:: 10000 lbs
Unit Location:: Indiana

Model: 100G-RRB14C
Manufacturer: Cascade
Type: Attachment

Capacity: 10,000 lbs

Attachment Type: Rotator
Rotational Capability: 360 degrees

Hydraulic Requirements:
- Operating Pressure: 2,500 PSI
- Flow Rate: 20 GPM

Weight: 1,400 lbs

Dimensions:
- Width: 60 inches
- Height: 55 inches
- Depth: 38 inches

Fork Specifications:
- Fork Length: Varies
- Fork Spread: 12-48 inches

Performance:
- Rotation Speed: 6 RPM

Mounting: ITA Class III

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2010 Cascade 45D-CFS-63266

Friskney Equipment Co

Used

PRICE: $2,000 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 22004
MAKE:: Cascade
MODEL:: 45D-CFS-63266
CLASS:: II
CAPACITY:: 4500 lbs
Unit Location:: Indiana

**Specifications for Model Number: 45D-CFS-63266** **General Description** - Model Number: 45D-CFS-63266 - Manufacturer: Cascade - Type: Attachment - Subtype: Fork Clamps **Performance** - Load Capacity: Approximately 8,000 lbs - Operating Pressure: Approximately 3600 psi - Clamping Force: Varies depending on hydraulic settings - Tilt Range: Approximately ±10 degrees **Physical Dimensions** - Overall Width: Approximately 52 inches - Overall Length: Varies - Frame Height: Approximately 30 inches - Fork Thickness: Approximately 2 inches **Fork Clamps** - Opening Range: 11 inches to 50 inches - Arm Type: Rubber-faced arms for secure grip - Arm Size: Approximately 8 inches by 42 inches **Hydraulic System** - Number of Hydraulic Functions: 2 - Recommended Hydraulic Oil Flow: 10 to 15 gallons per minute **Mounting** - Mounting Type: Quick-attach or hook-on options available **Weight and Build** - Attachment Weight: Approximately 1,200 lbs - Durable Steel Construction for Extended Life **Applications** - Suitable for handling palletized loads, baled materials, and unpalletized products - Designed for versatile load handling across various industries **Safety Features** - Equipped with anti-slip clamping technology - Integrated pressure relief valve for overload protection

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

Cascade NO DATA PLATE

Friskney Equipment Co

Used

PRICE: $3,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 22015
MAKE:: Cascade
MODEL:: NO DATA PLATE
CLASS:: IV
Unit Location:: Indiana

Manufacturer: Cascade
Type: Attachment
Subtype: Fork Positioners

General Specifications
- Attachment Type: Fork Positioners
- Width: Approximately 62 to 74 inches
- Height: Approximately 18 to 22 inches
- Depth: Approximately 8 to 12 inches
- Weight: Depending on model, 500 to 1000 lbs
Performance Specifications
- Load Capacity: Varies, generally up to 22,000 lbs
- Fork Length: Varies
- Fork Movement Range: Varies, typically up to 16 inches
- Hydraulic Flow: Approximately 3 to 8 gallons per minute
- Operating Pressure: Approximately 1500 to 2500 psi
Features
- Durable construction for heavy-duty applications
- Easy installation and maintenance
- Enhanced operator visibility
- Adjustable fork positioning for versatile handling
- Integrated hydraulic system

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2012 Cascade 90-RCS-173

Friskney Equipment Co

Used

PRICE: $4,000 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 22016
MAKE:: Cascade
MODEL:: 90-RCS-173
CLASS:: IV
CAPACITY:: 9000 lbs
Unit Location:: Indiana

FULLY TESTED & REFURBISHED. NEW PAINT AND DECALS

Model Details
- Model Number: 90-RCS-173
- Manufacturer: Cascade
- Type: Attachment
- Subtype: Paper Roll Clamps
Dimensions
- Width: 5.8 ft
- Height: 4.2 ft
- Depth: 3.5 ft
Performance
- Capacity: 6,500 lbs
- Opening Range: 10 inches to 60 inches
- Roll Diameter: 20 inches to 70 inches
- Clamp Force: 30,000 lbs
Features
- Full 360-degree continuous rotation
- Adjustable clamping pressure
- High-visibility design for safer operation
- Smooth contact pads to minimize damage
- Rugged construction for durability
Hydraulic
- Operating Pressure: 2,500 psi
- Hydraulic Flow: 15 GPM
- Number of Hydraulic Functions: 2
Additional Information
- Sideshift Capability: Yes
- Suitable for: Various Paper Roll Sizes

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

Finance at $/mo

2018 Cascade 42U-RCP-4A-36780

Friskney Equipment Co

Used

PRICE: $4,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 22018
MAKE:: Cascade
MODEL:: 42U-RCP-4A-36780
CLASS:: IV
CAPACITY:: 9260 lbs
Unit Location:: Indiana

General Specifications
- Manufacturer: Cascade
- Model Number: 42U-RCP-4A-36780
- Type: Attachment
- Subtype: Paper Roll Clamps
Capacity
- Load Capacity: Approximately 8,000 lbs
Dimensions
- Clamp Opening Range: Approximately 12 inches to 70 inches
- Arm Length: Varies
Hydraulic Specifications
- Hydraulic Pressure: 2,000 to 2,500 psi
- Flow Range: 5 to 7 gallons per minute
Performance
- Optimal Temperature Range: -20°F to 120°F
Weight
- Attachment Weight: Approximately 2,400 lbs
Features
- 360-Degree Rotation Capability
- Pad Options Available for Different Paper Types
- Pressure Relief Valve for Handling Delicate Materials
- Non-Marking Clamp Pads
Materials
- Heavy-Duty Steel Construction

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2009 Cascade 90F-RCP-01

Friskney Equipment Co

Used

PRICE: $3,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 22019
MAKE:: Cascade
MODEL:: 90F-RCP-01
CLASS:: IV
CAPACITY:: 9000 lbs
Unit Location:: Indiana

Model Number: 90F-RCP-01
Manufacturer: Cascade
Type: Attachment
Subtype: Paper Roll Clamps

General Specifications:

Attachment Class: Class II, Class III
Roll Diameter Range: 10 inches to 72 inches
Minimum Roll Weight Capacity: 2400 lbs
Maximum Roll Weight Capacity: 6000 lbs
Opening Range: 10 inches to 72 inches
Arm Thickness: 1.8 inches
Pad Length: varies
Frame Width: 30 inches

Performance:

Hydraulic Pressure: 2250 psi
Flow Rate: 8-12 gallons per minute
Rotation: 180 degrees or 360 degrees

Weight:

Attachment Weight: 1300 lbs to 1500 lbs

Safety and Features:

Non-marring Contact Pads
Adjustable Clamping Force
Integral Sideshift: +/- 4 inches
Pressure Relief Valves

Optional Features:

Quick Disconnect Hoses
Enhanced Rotational Control
Custom Pad Configurations

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2007 Toyota 8FGU30

Friskney Equipment Co

Used

PRICE: $12,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 11943
MAKE:: Toyota
MODEL:: 8FGU30
MAST TYPE:: Three Stage
MAST - LOWERED:: 89 in
MAST - RAISED:: 187 in
FUEL:: LP Gas
HOURS:: 15438 Hrs
SIDESHIFTER:: YES
CAPACITY:: 6000 lbs
Unit Location:: Indiana

General Information
- Model Number: 8FGU30
- Manufacturer: Toyota
- Type: Forklift
Engine
- Engine Type: 4-cylinder, 4-cycle
- Fuel Type: Gasoline
- Displacement: 2.2 liters (134 cubic inches)
Dimensions
- Overall Length: Approximately 95 inches
- Overall Width: Approximately 47 inches
- Overall Height: Approximately 85 inches (without mast)
- Wheelbase: Approximately 63 inches
Weight
- Approximate Weight: 9,000 lbs
Capacity
- Load Capacity: 6,000 lbs
Performance
- Travel Speed: Approximately 11 mph (unloaded)
- Lift Speed: Approximately 59 feet per minute (unloaded)
- Gradeability: Approximately 22% (unloaded)
Chassis
- Tire Type: Pneumatic
- Brakes: Wet disc
- Steering: Hydrostatic power steering
Hydraulics
- Hydraulic System Pressure: Approximately 2,800 psi
Forks
- Fork Length: Varies

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2013 Hyundai 13BOP-7

Wolter, Inc.

Used

PRICE: $12,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 173427
MAKE:: Hyundai
MODEL:: 13BOP-7
MAST TYPE:: Three Stage
FUEL:: Electric
HOURS:: 2682 Hrs
CAPACITY:: 3000 lbs
Unit Location:: Indiana

General Information
- Model Number: 13BOP-7
- Manufacturer: Hyundai
- Type: Forklift
Dimensions
- Overall Length: 77.6 inches
- Overall Width: 37.2 inches
- Overall Height: 79.5 inches
- Turning Radius: 58.3 inches
- Wheelbase: 55.9 inches
Powertrain
- Engine Type: Electric Motor
- Battery Voltage: 48 volts
- Drive Motor: 6 HP
- Lift Motor: 12 HP
Performance
- Load Capacity: 2,870 lbs
- Travel Speed (loaded): 7.5 mph
- Travel Speed (unloaded): 9 mph
- Lift Speed (loaded): 59 feet/min
- Lift Speed (unloaded): 98 feet/min
- Gradeability (loaded): 15%
- Gradeability (unloaded): 20%
Chassis
- Tires: Solid
- Front Tire Size: 18 x 7 inches
- Rear Tire Size: 4.5 x 3.5 inches
Operator Environment
- Seat: Adjustable
- Steering: Power Steering
- Instrumentation: Digital Display
Additional Features
- Ergonomic Controls
- Regenerative Braking
- LED Lights
- AC Drive Motor

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2011 TCM FCG36-8L

Wolter, Inc.

Used

PRICE: $7,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 615519
MAKE:: TCM
MODEL:: FCG36-8L
MAST TYPE:: Three Stage
MAST - LOWERED:: 89 in
MAST - RAISED:: 196 in
FUEL:: LP Gas
HOURS:: 2704 Hrs
CAPACITY:: 8000 lbs
Unit Location:: Indiana

General Specifications
- Manufacturer: TCM
- Model Number: FCG36-8L
- Type: Forklift
- Subtype: Cushion Tire 4 Wheel Sit Down
Engine
- Engine Type: Gasoline/LPG
- Engine Power: 60 horsepower
- Cylinder Count: 4
Capacity
- Load Capacity: 8,000 lbs
- Load Center: 24 inches
Performance
- Travel Speed (Loaded): 12 mph
- Travel Speed (Unloaded): 14 mph
- Lifting Speed (Loaded): 98 ft/min
- Lifting Speed (Unloaded): 112 ft/min
- Lowering Speed (Loaded): 98 ft/min
- Lowering Speed (Unloaded): 102 ft/min
Tires
- Tires Type: Cushion
- Front Tires: 22 x 9 x 16 inches
- Rear Tires: 18 x 7 x 12 inches
Dimensions
- Overall Length: 134 inches
- Overall Width: 48 inches
- Overall Height (without mast): 89 inches
Weight
- Total Weight: 13,500 lbs
Attachments
- Fork Length: Varies
- Side Shift: Optional

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2013 Toyota 7FBCU15

Wolter, Inc.

Used

PRICE: $15,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 256489
MAKE:: Toyota
MODEL:: 7FBCU15
MAST TYPE:: Three Stage
FUEL:: Electric
HOURS:: 7932 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: Indiana

Model Identification
- Model Number: 7FBCU15
- Manufacturer: Toyota
- Type: Electric Forklift
- Load Capacity: 3,000 lbs
Power & Powertrain
- Power Source: Electric
- Battery Voltage: 36 volts
Dimensions
- Overall Length with Forks: Varies
- Width: 42 inches
- Height to Top of Overhead Guard: Approximately 80 inches
- Wheelbase: 48 inches
- Minimum Outside Turning Radius: Approximately 70 inches
Performance
- Travel Speed (Loaded): 9 mph
- Lift Speed (Loaded): 59 feet per minute
- Gradeability (Loaded): 15%
Weight
- Service Weight: Approximately 7,000 lbs
Chassis
- Tire Type: Cushion
- Number of Wheels: 4
- Drive Tires: 18 x 7 x 12.12 inches
- Steering Tires: 15 x 5 x 11.75 inches

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2013 Crown FC4525-55

Wolter, Inc.

Used

PRICE: $19,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 262070
MAKE:: Crown
MODEL:: FC4525-55
MAST TYPE:: Three Stage
FUEL:: Electric
HOURS:: 8110 Hrs
SIDESHIFTER:: YES
CAPACITY:: 5500 lbs
Unit Location:: Indiana

General Specifications
- Model Number: FC4525-55
- Manufacturer: Crown
- Type: Forklift
- Subtype: Electric 4 Wheel Sit Down
Dimensions
- Overall Length: 126 inches (varies)
- Overall Width: 45 inches
- Height to Top of Overhead Guard: 88 inches
- Wheelbase: 59 inches
- Ground Clearance: 3.5 inches
Weight
- Service Weight: 10,500 lbs
Performance
- Load Capacity: 5,500 lbs
- Travel Speed (Loaded/Unloaded): 9 mph / 10 mph
- Lift Speed: 100 feet/min
- Lowering Speed: 98 feet/min
Powertrain
- Drive Motor: AC Electric
- Voltage: 48V
- Battery Compartment: 27 inches x varies
- Braking System: Regenerative and Electromagnetic
Wheels and Tires
- Tire Type: Pneumatic
- Front Tire Size: 18 x 7-8
- Rear Tire Size: 16 x 6-8
Additional Features
- Operator Compartment: Ergonomic Design, Adjustable Seat
- Steering: Power Steering
- Display: Onboard Diagnostic Display

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2013 Crown FC4525-55

Wolter, Inc.

Used

PRICE: $19,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 262072
MAKE:: Crown
MODEL:: FC4525-55
MAST TYPE:: Three Stage
FUEL:: Electric
HOURS:: 9130 Hrs
SIDESHIFTER:: YES
CAPACITY:: 5500 lbs
Unit Location:: Indiana

General Specifications
- Model Number: FC4525-55
- Manufacturer: Crown
- Type: Forklift
- Subtype: Electric 4 Wheel Sit Down
Dimensions
- Overall Length: 126 inches (varies)
- Overall Width: 45 inches
- Height to Top of Overhead Guard: 88 inches
- Wheelbase: 59 inches
- Ground Clearance: 3.5 inches
Weight
- Service Weight: 10,500 lbs
Performance
- Load Capacity: 5,500 lbs
- Travel Speed (Loaded/Unloaded): 9 mph / 10 mph
- Lift Speed: 100 feet/min
- Lowering Speed: 98 feet/min
Powertrain
- Drive Motor: AC Electric
- Voltage: 48V
- Battery Compartment: 27 inches x varies
- Braking System: Regenerative and Electromagnetic
Wheels and Tires
- Tire Type: Pneumatic
- Front Tire Size: 18 x 7-8
- Rear Tire Size: 16 x 6-8
Additional Features
- Operator Compartment: Ergonomic Design, Adjustable Seat
- Steering: Power Steering
- Display: Onboard Diagnostic Display

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2013 Crown FC4525-55

Wolter, Inc.

Used

PRICE: $26,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 262074
MAKE:: Crown
MODEL:: FC4525-55
MAST TYPE:: Three Stage
FUEL:: Electric
HOURS:: 10790 Hrs
SIDESHIFTER:: YES
CAPACITY:: 5500 lbs
Unit Location:: Indiana

General Specifications
- Model Number: FC4525-55
- Manufacturer: Crown
- Type: Forklift
- Subtype: Electric 4 Wheel Sit Down
Dimensions
- Overall Length: 126 inches (varies)
- Overall Width: 45 inches
- Height to Top of Overhead Guard: 88 inches
- Wheelbase: 59 inches
- Ground Clearance: 3.5 inches
Weight
- Service Weight: 10,500 lbs
Performance
- Load Capacity: 5,500 lbs
- Travel Speed (Loaded/Unloaded): 9 mph / 10 mph
- Lift Speed: 100 feet/min
- Lowering Speed: 98 feet/min
Powertrain
- Drive Motor: AC Electric
- Voltage: 48V
- Battery Compartment: 27 inches x varies
- Braking System: Regenerative and Electromagnetic
Wheels and Tires
- Tire Type: Pneumatic
- Front Tire Size: 18 x 7-8
- Rear Tire Size: 16 x 6-8
Additional Features
- Operator Compartment: Ergonomic Design, Adjustable Seat
- Steering: Power Steering
- Display: Onboard Diagnostic Display

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2017 Linde HT25CT

Wolter, Inc.

Used

PRICE: $21,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 272958
MAKE:: Linde
MODEL:: HT25CT
MAST TYPE:: Three Stage
FUEL:: LP Gas
HOURS:: 4172 Hrs
SIDESHIFTER:: YES
CAPACITY:: 5000 lbs
Unit Location:: Indiana

General Information
- Model Number: HT25CT
- Manufacturer: Linde
- Type: Forklift
Dimensions
- Overall Length: 96.5 inches
- Overall Width: 41.3 inches
- Overall Height (Cab): 83.1 inches
- Wheelbase: 59.1 inches
- Ground Clearance: 4.7 inches
Performance
- Load Capacity: 5,500 lbs
- Travel Speed: 11.2 mph (loaded)
- Turning Radius: 85.4 inches
Engine
- Type: Diesel
- Engine Power: 49 HP
- Displacement: 122 inches³
Tires
- Front Tires: 7.00-12
- Rear Tires: 6.00-9
Hydraulic System
- Pump Capacity: 14.5 gallons per minute
- Operating Pressure: 2,900 psi
Fuel Tank
- Capacity: 13.2 gallons
Additional Features
- Operator’s Cabin: Ergonomic design
- Attached Fork Length: Varies
- Comfort Features: Adjustable seat and steering wheel

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2017 Linde HT25CT

Wolter, Inc.

Used

PRICE: $21,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 272270
MAKE:: Linde
MODEL:: HT25CT
MAST TYPE:: Three Stage
FUEL:: LP Gas
HOURS:: 4269 Hrs
SIDESHIFTER:: YES
CAPACITY:: 5000 lbs
Unit Location:: Indiana

General Information
- Model Number: HT25CT
- Manufacturer: Linde
- Type: Forklift
Dimensions
- Overall Length: 96.5 inches
- Overall Width: 41.3 inches
- Overall Height (Cab): 83.1 inches
- Wheelbase: 59.1 inches
- Ground Clearance: 4.7 inches
Performance
- Load Capacity: 5,500 lbs
- Travel Speed: 11.2 mph (loaded)
- Turning Radius: 85.4 inches
Engine
- Type: Diesel
- Engine Power: 49 HP
- Displacement: 122 inches³
Tires
- Front Tires: 7.00-12
- Rear Tires: 6.00-9
Hydraulic System
- Pump Capacity: 14.5 gallons per minute
- Operating Pressure: 2,900 psi
Fuel Tank
- Capacity: 13.2 gallons
Additional Features
- Operator’s Cabin: Ergonomic design
- Attached Fork Length: Varies
- Comfort Features: Adjustable seat and steering wheel

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2018 Linde HT25CT

Wolter, Inc.

Used

PRICE: $20,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 272961
MAKE:: Linde
MODEL:: HT25CT
MAST TYPE:: Three Stage
FUEL:: LP Gas
HOURS:: 6501 Hrs
SIDESHIFTER:: YES
CAPACITY:: 5000 lbs
Unit Location:: Indiana

General Information
- Model Number: HT25CT
- Manufacturer: Linde
- Type: Forklift
Dimensions
- Overall Length: 96.5 inches
- Overall Width: 41.3 inches
- Overall Height (Cab): 83.1 inches
- Wheelbase: 59.1 inches
- Ground Clearance: 4.7 inches
Performance
- Load Capacity: 5,500 lbs
- Travel Speed: 11.2 mph (loaded)
- Turning Radius: 85.4 inches
Engine
- Type: Diesel
- Engine Power: 49 HP
- Displacement: 122 inches³
Tires
- Front Tires: 7.00-12
- Rear Tires: 6.00-9
Hydraulic System
- Pump Capacity: 14.5 gallons per minute
- Operating Pressure: 2,900 psi
Fuel Tank
- Capacity: 13.2 gallons
Additional Features
- Operator’s Cabin: Ergonomic design
- Attached Fork Length: Varies
- Comfort Features: Adjustable seat and steering wheel

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2013 Mitsubishi FGC30N

Wolter, Inc.

Used

PRICE: $11,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 177484
MAKE:: Mitsubishi
MODEL:: FGC30N
MAST TYPE:: Three Stage
FUEL:: LP Gas
HOURS:: 7670 Hrs
SIDESHIFTER:: YES
CAPACITY:: 6000 lbs
Unit Location:: Indiana

Manufacturer: Mitsubishi
Model Number: FGC30N

General Information:

Type: Forklift
Subtype: Pneumatic Tire, 4 Wheel, Sit Down

Engine:

Engine Type: Internal Combustion
Fuel Type: LPG
Engine Manufacturer: Mitsubishi
Displacement: Approximately 2.6 liters

Dimensions:

Overall Length: Approximately 135 inches (varies based on fork length)
Overall Width: Approximately 47 inches
Overall Height (to top of overhead guard): Approximately 85 inches
Wheelbase: Approximately 63 inches

Performance:

Capacity at Rated Load Center: Approximately 6,000 lbs
Load Center: 24 inches
Travel Speed (loaded): Approximately 11.4 mph
Lift Speed (loaded): Approximately 118 ft/min
Gradeability (loaded): Approximately 30%

Tires:

Type: Pneumatic
Front Tires: Dual
Rear Tires: Single

Brakes:

Service Brake: Hydraulic
Parking Brake: Mechanical hand operated

Hydraulics:

Hydraulic System Type: Open Center
Control Valve Type: Cowl-mounted
Auxiliary Hydraulic Flow: Approximately 19 GPM

Operator Comfort & Features:

Operator Seat: Adjustable with Seatbelt
Steering: Hydrostatic Power Steering
Instrumentation: Multifunction Display
Noise Level: Approximately 80 dB(A) at operator's ear

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2017 Hyster J40XN

Friskney Equipment Co

Used

PRICE: $15,500 USD

Get Quote

Get Brochure

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 13049
MAKE:: Hyster
MODEL:: J40XN
MAST TYPE:: Three Stage
MAST - LOWERED:: 108 in
MAST - RAISED:: 246 in
FUEL:: Electric
HOURS:: 3462 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Indiana

This is priced without a battery. Can price reman or new.

Model: J40XN
Manufacturer: Hyster
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down

Power Source
- Electric
- Battery Voltage: 80V
Performance
- Load Capacity: 4,000 lbs
- Travel Speed (laden/unladen): approx. 10 mph / 11 mph
- Lift Speed (laden/unladen): approx. 78 ft/min / 118 ft/min
Dimensions
- Overall Length: 122 inches
- Overall Width: 43.5 inches
- Fork Length: Varies
- Wheelbase: 54.25 inches
- Turning Radius: 80 inches
- Ground Clearance (Lowest Point): 3.1 inches
Weight
- Service Weight (without load): approx. 9,150 lbs
Tires
- Front Tires: 2, size 21x7-15
- Rear Tires: 2, size 16x6-10.5
Brakes
- Service Brake: Hydraulic
- Parking Brake: Spring Applied Electro Release
Operator Area
- Steering: Electronic Power Steering
- Seat: Adjustable with Suspension
- Instrumentation: Digital Display for Speed, Battery, and Other Indicators

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

Finance at $/mo

2016 Mitsubishi FGC30N

Wolter, Inc.

Used

PRICE: $9,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 195597
MAKE:: Mitsubishi
MODEL:: FGC30N
MAST TYPE:: Three Stage
FUEL:: LP Gas
HOURS:: 9939 Hrs
SIDESHIFTER:: YES
CAPACITY:: 6000 lbs
Unit Location:: Indiana

Manufacturer: Mitsubishi
Model Number: FGC30N

General Information:

Type: Forklift
Subtype: Pneumatic Tire, 4 Wheel, Sit Down

Engine:

Engine Type: Internal Combustion
Fuel Type: LPG
Engine Manufacturer: Mitsubishi
Displacement: Approximately 2.6 liters

Dimensions:

Overall Length: Approximately 135 inches (varies based on fork length)
Overall Width: Approximately 47 inches
Overall Height (to top of overhead guard): Approximately 85 inches
Wheelbase: Approximately 63 inches

Performance:

Capacity at Rated Load Center: Approximately 6,000 lbs
Load Center: 24 inches
Travel Speed (loaded): Approximately 11.4 mph
Lift Speed (loaded): Approximately 118 ft/min
Gradeability (loaded): Approximately 30%

Tires:

Type: Pneumatic
Front Tires: Dual
Rear Tires: Single

Brakes:

Service Brake: Hydraulic
Parking Brake: Mechanical hand operated

Hydraulics:

Hydraulic System Type: Open Center
Control Valve Type: Cowl-mounted
Auxiliary Hydraulic Flow: Approximately 19 GPM

Operator Comfort & Features:

Operator Seat: Adjustable with Seatbelt
Steering: Hydrostatic Power Steering
Instrumentation: Multifunction Display
Noise Level: Approximately 80 dB(A) at operator's ear

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2014 Nissan MCK1B1L15S

Wolter, Inc.

Used

PRICE: $23,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 247887
MAKE:: Nissan
MODEL:: MCK1B1L15S
MAST TYPE:: Three Stage
FUEL:: Electric
HOURS:: 4488 Hrs
SIDESHIFTER:: YES
CAPACITY:: 3000 lbs
Unit Location:: Indiana

Model: MCK1B1L15S
Manufacturer: Nissan
Type: Forklift
Subtype: Electric 4 Wheel Sit Down

Power Source
- Type: Electric
- Battery Voltage: 48V
- Battery Capacity: Varies (depends on battery type)
Capacity
- Load Capacity: 3,000 lbs
Dimensions
- Overall Length: 10.3 ft
- Overall Width: 3.5 ft
- Overall Height (without mast): 6.5 ft
- Fork Length: Varies
- Wheelbase: 5.2 ft
- Turning Radius: 5.6 ft
Performance
- Travel Speed (laden/unladen): 7/8 mph
- Lift Speed (laden/unladen): 63/98 ft/min
- Gradeability (laden/unladen): 12%/25%
Wheels & Tires
- Tire Type: Pneumatic
- Tire Size (front): 18 x 7-8 inches
- Tire Size (rear): 15 x 4.5-8 inches
Weight
- Service Weight: 6,000 lbs

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2014 Yale GC060VX

MH Equipment Company

Used

PRICE: $12,500 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: EQ0134917
MAKE:: Yale
MODEL:: GC060VX
MAST TYPE:: Three Stage
MAST - LOWERED:: 187 in
MAST - RAISED:: 88 in
FUEL:: LP Gas
HOURS:: 9716 Hrs
CAPACITY:: 6000 lbs
Unit Location:: Indiana

**General Specifications**

Model Number: GC060VX
Manufacturer: Yale
Type: Forklift
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Power Source: LPG
Operator Type: Sit-Down Rider

**Dimensions**

Overall Length: Approximately 104 inches
Overall Width: 43-45 inches (depends on specific model configuration)
Overall Height to Top of Overhead Guard: Approximately 85 inches
Wheelbase: 63 inches
Ground Clearance: 3.75 inches

**Weights**

Base Weight: Approximately 10,500 pounds

**Capacity**

Rated Capacity: 6,000 pounds

**Tires**

Tire Type: Cushion
Number of Wheels: 4
Front Tire Size: 21 x 7 x 15 inches
Rear Tire Size: 16 x 5 x 10.5 inches

**Engine**

Engine Type: LPG Engine

**Transmission**

Transmission Type: Powershift
Number of Speeds: 1 Forward/1 Reverse

**Performance**

Travel Speed: Up to 11 mph
Lift Speed: Approximately 110 fpm (feet per minute)

**Braking System**

Service Brake: Hydraulic
Parking Brake: Hand operated

**Steering**

Steering System: Automotive-type with hydrostatic power steering

**Additional Features**

Operator Presence Detection System: Standard
Adjustable Steering Column: Standard
Ergonomic Seat: Optional suspension seat available

MH Equipment Company
Gresham Carter: 502-385-2599
3306 Gilmore Industrial Blvd
Louisville, KY 40213

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

MH Equipment Company
3306 Gilmore Industrial Blvd

Louisville, KY 40213

502-385-2599

2001 Yale ERP040TF

Wolter, Inc.

Used

PRICE: $10,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 275205
MAKE:: Yale
MODEL:: ERP040TF
MAST TYPE:: Three Stage
FUEL:: Electric
HOURS:: 9370 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4000 lbs
Unit Location:: Indiana

Model Information
- Model Number: ERP040TF
- Manufacturer: Yale
- Type: Forklift
- Subtype: Electric 3 Wheel Sit Down
- Fuel Type: Electric
Performance
- Rated Load Capacity: Approximately 4,000 lbs
- Drive Speed (Loaded/Unloaded): Approximately 9 mph / 10.5 mph
- Gradeability (Loaded/Unloaded): Approximately 10% / 20%
Dimensions
- Overall Length: Approximately 78 inches (varies)
- Overall Width: Approximately 40 inches
- Wheelbase: Approximately 51 inches
- Ground Clearance: Approximately 3 inches
Weights
- Service Weight: Approximately 7,500 lbs
- Axle Load, Loaded (Front/Rear): Varies depending on load distribution
Tires
- Tire Type: Cushion tires
- Tire Size (Front): 18 x 7 inches
- Tire Size (Rear): 15 x 5 inches
Powertrain
- Drive Motor: Approximately 36-volt electric motor
- Steering Type: Power steering
- Braking System: Regenerative and mechanical braking
Battery
- Battery Capacity: Approximately 750 Ah
- Battery Voltage: 36 Volt
Operator Compartment
- Seat Type: Suspension seat
- Steering: Adjustable steering column
- Display: Multi-function display for operational status

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2014 Komatsu FG30SHT-16

Wolter, Inc.

Used

PRICE: $11,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 279712
MAKE:: Komatsu
MODEL:: FG30SHT-16
MAST TYPE:: Three Stage
FUEL:: LP Gas
HOURS:: 4374 Hrs
SIDESHIFTER:: YES
CAPACITY:: 6000 lbs
Unit Location:: Indiana

General Specifications
- Model: FG30SHT-16
- Manufacturer: Komatsu
- Type: Forklift
- Power: LPG (Liquefied Petroleum Gas)
Engine Specifications
- Engine Type: LPG
- Number of Cylinders: 4
- Displacement: Approximately 200 cubic inches
Dimensions
- Overall Length: Approximately 154 inches
- Overall Width: Approximately 47 inches
- Overall Height: Approximately 84 inches
- Wheelbase: Approximately 71 inches
Weights
- Unloaded Weight: Approximately 10,500 lbs
Tire Specifications
- Tire Type: Pneumatic
- Front Tire Size: Approximately 28 x 9-15 inches
- Rear Tire Size: Approximately 6.5-10 inches
Performance
- Load Capacity: 6,000 lbs
- Travel Speed (Unloaded): Approximately 12 mph
- Travel Speed (Loaded): Approximately 11 mph
Fork Specifications
- Fork Length: Varies
- Fork Width: 4 inches
- Fork Thickness: 2 inches
Additional Features
- Power Steering
- Overhead Guard

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2018 Mitsubishi FD50CN1

Wolter, Inc.

Used

PRICE: $42,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 217578
MAKE:: Mitsubishi
MODEL:: FD50CN1
MAST TYPE:: Three Stage
FUEL:: Diesel
HOURS:: 5602 Hrs
SIDESHIFTER:: YES
CAPACITY:: 10000 lbs
Unit Location:: Indiana

General Specifications
- Model Number: FD50CN1
- Manufacturer: Mitsubishi
- Type: Forklift
- Subtype: Pneumatic Tire 4 Wheel Sit Down
- Fuel Type: Diesel
Dimensions
- Overall Length: Approximately 172 inches
- Overall Width: Approximately 73 inches
- Overall Height: Approximately 104 inches
- Wheelbase: Approximately 94 inches
- Ground Clearance: Approximately 6.3 inches
Performance
- Load Capacity: 11,000 lbs
- Travel Speed: Approximately 12 mph
- Turning Radius: Approximately 122 inches
Powertrain
- Engine Power: Approximately 100 HP
- Transmission: Powershift
- Number of Speeds: 2 forward, 1 reverse
Tires
- Type: Pneumatic
- Front Tire Size: Approximately 8.25-15
- Rear Tire Size: Approximately 8.25-15
Hydraulic System
- Hydraulic Pressure: Approximately 2,600 psi
- Hydraulic Flow Rate: Approximately 19 gallons per minute
Capacity
- Fuel Tank Capacity: Approximately 26 gallons
- Hydraulic Tank Capacity: Approximately 16 gallons
Forks
- Fork Length: Varies
- Fork Width: Approximately 8 inches

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2014 Jungheinrich ETR345

Wolter, Inc.

Used

PRICE: $16,900 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 179578
MAKE:: Jungheinrich
MODEL:: ETR345
MAST TYPE:: Three Stage
FUEL:: Electric
HOURS:: 8160 Hrs
SIDESHIFTER:: YES
CAPACITY:: 4500 lbs
Unit Location:: Indiana

Model Number: ETR345
Manufacturer: Jungheinrich
Type: Forklift
Fuel Type: Electric

Dimensions

Overall Length: 127 inches
Overall Width: 42 inches
Height to Top of Overhead Guard: 88 inches
Turning Radius: 60 inches

Performance

Load Capacity: 3,500 lbs
Travel Speed: 7.5 miles per hour
Gradeability: 15%
Lift Speed: 100 feet per minute

Weight

Total Weight: 7,650 lbs

Tires

Tire Type: Polyurethane
Front Tire Size: 10 inches
Rear Tire Size: 6 inches

Battery

Battery Voltage: 36V
Battery Capacity: 775 Ah

Additional Features

AC Drive Motor
Regenerative Braking
Operator Display with Battery Indicator
Power Steering

Wolter, Inc.
Ashley Hall : 317-593-2599
820 S Post Rd
Indianapolis, IN 46239

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo

2005 Genie Z80/60

Friskney Equipment Co

Used

PRICE: $32,000 USD

Get Quote

Get Brochure

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 12254
MAKE:: Genie
MODEL:: Z80/60
LIFT HEIGHT:: 80'
DRIVE:: 4WD
FUEL:: Diesel
HOURS:: 1502 Hrs
Unit Location:: Indiana

Model: Z-80/60
Manufacturer: Genie
Type: Boom Lift
Subtype: Articulated Boom
Fuel Type: Diesel

Dimensions

Length: 37 ft 8 in
Width: 8 ft 2 in
Height (Stowed): 10 ft
Ground Clearance: 1 ft

Weight

Total Weight: 35,900 lbs

Performance

Horizontal Reach: 60 ft
Up and Over Clearance: 29 ft 2 in
Platform Height: 80 ft
Platform Capacity: 500 lbs (Unrestricted)
Platform Capacity: 1,000 lbs (Restricted)

Platform

Platform Size: 8 ft x 3 ft

Drive

Drive Speed: 3.0 mph
Gradeability: 45%

Engine

Engine Model: Deutz TD2.9L4
Engine Power: 74 hp

Turning Radius

Inside: 13 ft 2 in
Outside: 25 ft 4 in

Friskney Equipment Co
Sales: 260 665 3600
101 Woodhull Dr
Angola, IN 46703-934

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Finance at $/mo