Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
2009 Clark CMP45D pneumatic-tire forklift with 11,122 hours and a 8,000 lb capacity. Configured with diesel power, a duplex mast, side shift, up to 145 inches of lift for indoor/outdoor material-handling applications. Listed at $7,950; financing and nationwide delivery options are available.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: CMP45D
    • Manufacturer: Clark
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: Approximately 121.2 inches
    • Overall Width: 54.5 inches
    • Overall Height (to top of overhead guard): 86.6 inches
    • Wheelbase: 70.5 inches
    • Ground clearance (Under Mast - Center): Approximately 5.1 inches
  • Performance
    • Standard Load Capacity: 9,000 lbs
    • Travel Speed (laden): Approximately 12.4 mph
    • Travel Speed (unladen): Approximately 14.3 mph
    • Lifting Speed (laden): ~106 feet per minute
    • Lowering Speed (laden): ~98.4 feet per minute
    • Gradeability (laden): Approximately 32%
  • Engine
    • Engine Manufacturer: PERKINS
    • Engine Model: 1104C-44
    • Engine Power: 73 hp
    • Number of Cylinders: 4
  • Tires
    • Front Tire Size: 8.25-15
    • Rear Tire Size: 8.25-15
    • Tire Type: Pneumatic
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Hand Operated
  • Transmission
    • Transmission Type: Powershift
    • Speeds: 2 forward, 2 reverse
  • Hydraulic System
    • Hydraulic Pressure: Approximately 2,850 psi
    • Hydraulic Tank Capacity: 15.8 gallons

2009 Clark CMP45D

pneumatic tire 4 wheel sit down diesel

$7,950 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Department
Phone:

ADDRESS
Forklift Pro, Inc.
9801 Industrial Drive
PinevilleNorth Carolina 28134
ATTRIBUTES
STOCK #:
26304
YEAR:
2009
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
MAST HEIGHT:
145 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
11122
UNIT LOCATION:
POST DATE:
7/11/2026
Reviews
Useful
Not

The Clark CMP45D forklift has really served us well on the job site. I remember the first time I hopped on one; it felt solid and sturdy right from the start. Handling heavy loads with a diesel engine is a breeze, and the pneumatic tires provide a nice cushion over bumpy terrain. It’s become a go-to for those days when we have a lot of lifting to do, whether it's shifting pallets or maneuvering through tight spaces. Honestly, it's reassuring to know we have reliable equipment like this when the pressure is on. Overall, it's been a dependable addition to our fleet, and I definitely have a newfound respect for Clark forklifts.



Review by Jake Thompson (2/1/2025)

  • General Information
    • Model Number: CMP45D
    • Manufacturer: Clark
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: Approximately 121.2 inches
    • Overall Width: 54.5 inches
    • Overall Height (to top of overhead guard): 86.6 inches
    • Wheelbase: 70.5 inches
    • Ground clearance (Under Mast - Center): Approximately 5.1 inches
  • Performance
    • Standard Load Capacity: 9,000 lbs
    • Travel Speed (laden): Approximately 12.4 mph
    • Travel Speed (unladen): Approximately 14.3 mph
    • Lifting Speed (laden): ~106 feet per minute
    • Lowering Speed (laden): ~98.4 feet per minute
    • Gradeability (laden): Approximately 32%
  • Engine
    • Engine Manufacturer: PERKINS
    • Engine Model: 1104C-44
    • Engine Power: 73 hp
    • Number of Cylinders: 4
  • Tires
    • Front Tire Size: 8.25-15
    • Rear Tire Size: 8.25-15
    • Tire Type: Pneumatic
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Hand Operated
  • Transmission
    • Transmission Type: Powershift
    • Speeds: 2 forward, 2 reverse
  • Hydraulic System
    • Hydraulic Pressure: Approximately 2,850 psi
    • Hydraulic Tank Capacity: 15.8 gallons
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following