Raymond is renowned for its innovation and focus on optimizing productivity, efficiency, and safety within material handling operations. Their equipment, such as forklifts and pallet jacks, often features advanced technologies like integrated telematics and energy-efficient systems designed to enhance operational intelligence and performance. Raymond's products are known for robust durability, ergonomic design, and the ability to integrate seamlessly with various warehouse management systems. This allows for reduced downtime and improved workflow automation, offering a comprehensive solution tailored to complex warehousing needs relative to its competitors.
Height to Top of Overhead Guard: Approximately 7.5 ft
Wheelbase: Approximately 5.4 ft
Ground Clearance: Approximately 3 in
Performance
Load Capacity: 3,500 lbs
Tilt Angle Forward/Backward: 2°/4°
Travel Speed: Up to 7 mph
Lifting Speed (loaded/unloaded): Approximately 70/100 ft per minute
Lowering Speed (loaded/unloaded): Approximately 80/70 ft per minute
Gradeability (loaded/unloaded): up to 10%
Forks
Fork Length: Varies
Fork Width: Approximately 4 in
Fork Thickness: Approximately 1.5 in
Weight
Service Weight: Approximately 8,000 lbs
Tires
Front Tire Type: Polyurethane
Rear Tire Type: Polyurethane
Tire Size Front: Approximately 12 in diameter
Tire Size Rear: Approximately 9 in diameter
Battery
Battery Voltage: 36V
Battery Capacity: Up to 775 Ah
Additional Features
Advanced Ergonomic Design
Adjustable Steering Column
Onboard Diagnostics
Quality Forklift Inc. Bob Hennen 587 Citation Dr Shakopee, MN 55379
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Listings above this line match your search request, listings below may not match but are similar and may be used as an alternative.
2025 Viper Lift Trucks FD35
United Lift LLC
5
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
BF9343219-ILIL
MAKE:
Viper Lift Trucks
MODEL:
FD35
MAST TYPE:
Two Stage
MAST - LOWERED:
101 in
MAST - RAISED:
157 in
FUEL:
Diesel
SIDESHIFTER:
YES
CAPACITY:
8000 lbs
PRICE
$57,442 USD
General Specifications
Model Number: FD35
Manufacturer: Viper Lift Trucks
Type: Forklift
Subtype: Rough Terrain (Vertical Mast)
Fuel Type: Diesel
Engine Specifications
Engine Type: Diesel Engine
Horsepower: Approximately 58 HP
Dimensions
Overall Length including Forks: Varies
Overall Width: Approximately 6.5 feet
Overall Height: Varies
Wheelbase: Approximately 6 feet
Ground Clearance: Approximately 11 inches
Capacity
Load Capacity: 7,700 lbs
Performance
Travel Speed: Approximately 12 mph
Tires
Tire Type: Pneumatic Rough Terrain Tires
Features
Full Suspension Seat
Hydraulic Power Steering
Adjustable Steering Wheel
United Lift LLC Arcangelo Capozzolo 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Towlift Inc. Cody Anderson 4701 Oakport Street Oakland, CA 94601
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Towlift Inc. Cody Anderson 4701 Oakport Street Oakland, CA 94601
Doosan Material Handling Solutions of Southern Cal
1
Buy or Rent
DETAILS
DESCRIPTION
SPECS
RENTAL
CONTACT
STK#:
101325-21
MAKE:
Genie
MODEL:
GS1932E
LIFT HEIGHT:
19'
DRIVE:
2WD
FUEL:
DC Power
HOURS:
0 Hrs
PRICE
CALL FOR PRICE
Ready to Rent!
Specifications
Manufacturer: Genie
Model Number: GS1932E
Type: Scissor Lift
Subtype: Slab
Fuel Type: DC Power
Dimensions
Length: 6 ft 2 in
Width: 2 ft 8 in
Height - Rails up: 6 ft 10 in
Height - Stowed rails folded: 5 ft 9 in
Platform Size: 6 ft 1 in x 2 ft 6 in
Ground Clearance - Center: 3 in
Performance
Drive Speed - Stowed: 2.8 mph
Drive Speed - Raised: 0.5 mph
Gradeability: 25%
Turning Radius - Inside: 0 in
Turning Radius - Outside: 7 ft 10 in
Load Capacity
Lift Capacity: 507 lbs
Maximum Number of Occupants: 2
Power
Battery Type: 24V DC
Battery Capacity: 4 x 6V, 225 Ah batteries
Weight
Machine Weight: 2,702 lbs
MONTHLY RENTAL
$650 USD
WEEKLY RENTAL
$400 USD
DAILY RENTAL
$195 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Doosan Material Handling Solutions of Southern Cal Cody Anderson 650 W Freedom Av Orange , CA 92865
Ground Clearance: 5 inches at the center of the wheelbase
Performance
Load Capacity: 5,000 lbs
Travel Speed: 11 mph with load
Lift Speed: 98 feet per minute with load
Gradeability: 23% with load
Powertrain
Engine Type: Internal Combustion Engine
Engine Power: 58 HP
Transmission: Powershift
Number of Speeds: 1 Forward / 1 Reverse
Fuel System: LPG
Operational Details
Operator Seating: Enclosed cabin with standard seat
Steering System: Hydraulic power steering
Brake System: Hydraulic, drum brakes
Hydraulic System Pressure: 3,000 psi
Forks
Fork Length: Varies
Fork Width: 4 inches
Fork Thickness: 1.6 inches
MONTHLY RENTAL
$800 USD
WEEKLY RENTAL
$400 USD
DAILY RENTAL
$200 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Russell Rents Tom Brandt 1793 Enterprise Parkway Twinsburg, OH 44087
Overall Length (without forks): Approximately 8.2 feet
Overall Width: Approximately 4.2 feet
Overall Height (overhead guard): Approximately 7.2 feet
Weight
Operating Weight: Approximately 8,900 lbs
Tires
Standard Tires: Solid Pneumatic
Hydraulics
Hydraulic System Pressure: Approximately 2,900 psi
Fuel Tank
Fuel Capacity: Approximately 15 gallons
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
AHP Enterprises Arthur Peagler 2595 W. Bay St Savannah, GA 31408
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close