Material handling equipment created by Hamm is distinct due to its emphasis on advanced compaction technology and operator comfort. Hamm equipment often features innovative designs that optimize efficiency and effectiveness in compaction tasks. Their machines are known for incorporating cutting-edge technology, such as oscillation systems that allow for effective compaction even on difficult surfaces, while minimizing vibration impact on operators and surroundings. Additionally, Hamm places a strong focus on ease of use, offering user-friendly controls and ergonomic features that enhance operator comfort and reduce fatigue. This unique combination of high-performance technology and operator-centric design sets Hamm apart from its competition in the material handling sector.
Chicago Forklift, LLC John Major: 847-469-9911 1127 Dickens Dr. Oconomowoc, WI 60056
SALES - USED EQUIPMENT. Purchaser understands that the Goods described herein have been used by persons other than Seller. Purchaser is warned and acknowledges that such Goods may bear or contain hazardous chemicals or other hazardous materials which may be or may become, by chemical reaction or otherwise, directly or indirectly hazardous to life, to health, or to property (by reason of toxicity, flammability, explosiveness or for other similar or different reasons during use, handling, cleaning, reconditioning, disposal or at any other time after the article leaves the possession and control of Seller). Purchaser does hereby discharge Seller from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of Seller to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning.
Battery Capacity: Approximate amp-hour varies based on battery type
Chicago Forklift, LLC John Major: 847-469-9911 1127 Dickens Dr. Oconomowoc, WI 60056
SALES - USED EQUIPMENT. Purchaser understands that the Goods described herein have been used by persons other than Seller. Purchaser is warned and acknowledges that such Goods may bear or contain hazardous chemicals or other hazardous materials which may be or may become, by chemical reaction or otherwise, directly or indirectly hazardous to life, to health, or to property (by reason of toxicity, flammability, explosiveness or for other similar or different reasons during use, handling, cleaning, reconditioning, disposal or at any other time after the article leaves the possession and control of Seller). Purchaser does hereby discharge Seller from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of Seller to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning.
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Supreme Forklift & Equipment Sales Dept.: 480-660-4508 25250 S Power Rd Queen Creek, AZ 85142
New 2024 Taylor X550M, high capacity pneumatic forklift
General Information
Model Number: X550M
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel
Dimensions
Length to Fork Face: 179 inches
Overall Width: 88 inches
Overall Height: 124 inches
Ground Clearance: 13 inches
Wheelbase: 126 inches
Weights
Operating Weight: 55,000 lbs
Counterweight: 14,000 lbs
Engine
Engine Manufacturer: Cummins
Engine Model: QSB6.7
Engine Power: 173 HP
Performance
Rated Load Capacity: 55,000 lbs
Travel Speed: 20 mph
Turning Radius: 14 feet
Tires
Tire Type: Pneumatic
Tire Size (Front): 12.00 x 20
Tire Size (Rear): 12.00 x 20
Forks
Fork Length: varies
Fork Width: 7 inches
Fork Thickness: 3 inches
Hydraulic System
Pump Capacity: 45 gallons per minute
Hydraulic Tank Capacity: 60 gallons
Brakes
Service Brakes: Wet Disc
Parking Brake: Mechanical Lever
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
New 2024 Taylor X550M, high capacity pneumatic forklift
General Information
Model Number: X550M
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel
Dimensions
Length to Fork Face: 179 inches
Overall Width: 88 inches
Overall Height: 124 inches
Ground Clearance: 13 inches
Wheelbase: 126 inches
Weights
Operating Weight: 55,000 lbs
Counterweight: 14,000 lbs
Engine
Engine Manufacturer: Cummins
Engine Model: QSB6.7
Engine Power: 173 HP
Performance
Rated Load Capacity: 55,000 lbs
Travel Speed: 20 mph
Turning Radius: 14 feet
Tires
Tire Type: Pneumatic
Tire Size (Front): 12.00 x 20
Tire Size (Rear): 12.00 x 20
Forks
Fork Length: varies
Fork Width: 7 inches
Fork Thickness: 3 inches
Hydraulic System
Pump Capacity: 45 gallons per minute
Hydraulic Tank Capacity: 60 gallons
Brakes
Service Brakes: Wet Disc
Parking Brake: Mechanical Lever
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Used 2022 Taylor TXH360L, high capacity pneumatic forklift
General Information
Model: TXH350L
Manufacturer: Taylor
Type: Forklift
Engine
Engine Type: Diesel
Drive: 4x2
Dimensions
Length: Varies
Width: 10 feet
Height: 12 feet
Performance
Lifting Capacity: 35,000 lbs
Power: 200 hp
Travel Speed: 20 mph
Weight & Capacity
Operating Weight: 38,000 lbs
Fuel Capacity: 82 gallons
Wheels and Tires
Tire Type: Pneumatic
Front Tire Size: 12 inches
Rear Tire Size: 9 inches
Operator Environment
Seating: Adjustable deluxe seat
Steering: Tilt steering wheel
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Used Taylor X360L high capacity pneumatic forklift
Model Number: X360L
Manufacturer: Taylor
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type: Diesel
General Dimensions
Overall Length: 21 feet
Overall Width: 8 feet
Overall Height: 10 feet
Wheelbase: 12 feet
Ground Clearance: 12 inches
Weight: 42,000 lbs
Turning Radius: 14 feet
Performance
Load Capacity: 36,000 lbs
Travel Speed: 15 mph
Lifting Speed: 65 feet/min
Gradeability: 25%
Engine
Engine Type: Diesel
Engine Power: 200 HP
Cylinder Displacement: 9.0 liters
Fuel Tank Capacity: 100 gallons
Tires
Tire Type: Pneumatic
Tire Size (Front): 12.00-20
Tire Size (Rear): 12.00-20
Number of Wheels: 4
Forks
Fork Length: Varies
Fork Width: 8 inches
Fork Thickness: 2.5 inches
Adjustable Fork Spread: 40 inches
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Used Taylor TXH350L high capacity pneumatic forklift
General Information
Model: TXH350L
Manufacturer: Taylor
Type: Forklift
Engine
Engine Type: Diesel
Drive: 4x2
Dimensions
Length: Varies
Width: 10 feet
Height: 12 feet
Performance
Lifting Capacity: 35,000 lbs
Power: 200 hp
Travel Speed: 20 mph
Weight & Capacity
Operating Weight: 38,000 lbs
Fuel Capacity: 82 gallons
Wheels and Tires
Tire Type: Pneumatic
Front Tire Size: 12 inches
Rear Tire Size: 9 inches
Operator Environment
Seating: Adjustable deluxe seat
Steering: Tilt steering wheel
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Equipment