Cascade all-sizes-available Forklift attachment For Sale
Explore our best priced selection of 1 Cascade all-sizes-available Forklift attachment in stock. These Cascade all-sizes-available Forklift attachment are available for immediate and local delivery.
Rent Ready- 48" Platens- Sideshift- Good Rent Ready
Model Number: 35E
Manufacturer: Cascade
Type: Attachment
Subtype: Push/Pull
General Specifications
Equipment Type: Push/Pull Attachment
Application: Suitable for handling loads on slip sheets instead of pallets
Mounting: Quick-disconnect for easy installation on forklifts
Performance
Load Capacity: Approximately 3,500 lbs
Operating Pressure: Typically around 2300 psi
Dimensions
Width: Approximately 45 inches
Height: Approximately 60 inches
Depth: Approximately 24 inches
Weight
Attachment Weight: Approximately 900 lbs
Fork Specifications
Length: Varies
Benco Industrial Equipment, LLC Vince Galati: 636-487-4936 1140 Mid Rivers Industrial Dr. St. Peters, MO 63376
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Carrying Capacity: Approximately 5,000 - 7,000 lbs
Opening Range: 24 inches - 88 inches
Design Features
Non-Marring Pads
Durable Steel Construction
Side Shift Capability
Valve Protection
Hydraulic Specifications
Hydraulic Pressure: 2,000 - 3,500 psi
Flow Rate: 7 - 17 gallons per minute
Application
Intended for handling carton, box, and bale loads
Suitable for warehouse applications
Options
Custom Pad Configurations
Quick Disconnects
Pressure Gauge
Discount Forklift Sales Dept: 720-770-2783 4905 Lima St Denver, CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Powder-coated finish for enhanced resistance to corrosion
**Mechanical Features**
Easy to connect hydraulic system
Adjustable forks for versatile material handling
Integrated safety locks
**Operational Features**
Compatible with a variety of forklift makes and models
Multi-purpose use for different load types
Efficient load stabilization system
Friskney Equipment Co Sales: 260 665 3600 101 Woodhull Dr Angola, IN 46703-934
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Benco Industrial Equipment, LLC Vince Galati: 636-487-4936 1140 Mid Rivers Industrial Dr. St. Peters, MO 63376
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
CASCADE PAPER ROLL CLAMP
CLASS III
51" OPEN / 10" CLOSE
General Characteristics:
Model Number: 66F-RCP-01BR0
Manufacturer: Cascade
Type: Attachment
Subtype: Paper Roll Clamps
Performance:
Rated Capacity: Varies by specific usage and configuration
Rotation: 360 degrees continuous rotation available
Opening Range: Typically 20 inches to 72 inches (Varies depending on specific model and configuration)
Dimensions:
Arm Length: May vary based on specific model
Clamp Width: Varies, often adjustable within certain limits
Weight: Approx. 2,200 lbs (will vary slightly for specific models and configurations)
Hydraulics:
Hydraulic Pressure: Requires a range typically from 1,500 to 2,500 psi
Number of Auxiliary Hydraulic Functions Required: 3
Operational Features:
Pilot-Operated Check Valve: Helps prevent load drop during hydraulic failure
Pressure Relief Valve: Protects system against overpressure
Field Adjustability: Allows for optimization of performance based on the paper roll size
Material and Finish:
Construction Material: High-strength alloy steels for enhanced durability
Environmental Tolerance:
Operating Temperature Range: Typically from -30°F to 120°F
Lee Cassam & Associates Lee Cassam: 817 838 5438 2108 Delante St Haltom City, TX 76117
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Carrying Capacity: Approximately 5,000 - 7,000 lbs
Opening Range: 24 inches - 88 inches
Design Features
Non-Marring Pads
Durable Steel Construction
Side Shift Capability
Valve Protection
Hydraulic Specifications
Hydraulic Pressure: 2,000 - 3,500 psi
Flow Rate: 7 - 17 gallons per minute
Application
Intended for handling carton, box, and bale loads
Suitable for warehouse applications
Options
Custom Pad Configurations
Quick Disconnects
Pressure Gauge
MONTHLY RENTAL
$500 USD
WEEKLY RENTAL
$300 USD
DAILY RENTAL
$100 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Boston Massachusetts Branch Steve Johnson: 2015551212 1234 Main Boston, MA 02134
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
If the manufacturer's warranty still is in effect, the dealer may include it in the "systems covered/duration" section of the Buyers Guide. To make sure you can take advantage of the coverage, ask the dealer for the car's warranty documents. Verify the information (what's covered, expiration date/miles, necessary paperwork) by calling the manufacturer's zone office. Make sure you have the Vehicle Identification Number (VIN) when you call. Test
Equipment
Close