2 Used Mustang Equipment For Sale

Forklift Pro, Inc.
9801 Industrial Drive

Pineville, NC 28134

803-205-2979

2020 Mustang 1900R

Mid Atlantic Industrial Equipment LTD.

Buy or Rent

DETAILS

DESCRIPTION

CONTACT

FINANCE

WARRANTY

STK#:: SL00050
MAKE:: Mustang
MODEL:: 1900R
PRICE: $22,500 USD

2020 Mustang 1900R skid steer, 70" bucket, open ROPS

Mid Atlantic Industrial Equipment LTD.
Sales Dept.: 717-276-0588
1231 E Wallace St
York, PA 17403

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units. Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee. Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.

Get Quote

Get Flyer

Finance at $/mo

Mid Atlantic Industrial Equipment LTD.
1231 E Wallace St

York, PA 17403

717-276-0588

2022 Manitou 2200R

Mid Atlantic Industrial Equipment LTD.

Buy or Rent

DETAILS

DESCRIPTION

CONTACT

FINANCE

WARRANTY

STK#:: SL00057
MAKE:: Manitou
MODEL:: 2200R
PRICE: $42,500 USD

2022 Manitou 2200R skid steer, Full cab w/heat & A/C

Mid Atlantic Industrial Equipment LTD.
Sales Dept.: 717-276-0588
1231 E Wallace St
York, PA 17403

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units. Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee. Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.

Get Quote

Get Flyer

Finance at $/mo

Mid Atlantic Industrial Equipment LTD.
1231 E Wallace St

York, PA 17403

717-276-0588

2018 Hyundai 70D-9

Global Fleet Solutions

Used

DETAILS

SPECS

CONTACT

STK#:: EQC013444
MAKE:: Hyundai
MODEL:: 70D-9
PRICE: CALL FOR PRICE

General Specifications
- Manufacturer: Hyundai
- Model Number: 70D-9
- Power Source: Diesel
- Operator Type: Seated
Engine
- Engine Model: Cummins QSB6.7
- Rated Power: Approximately 140 HP at 2,200 RPM
- Maximum Torque: Approximately 460 lb-ft at 1,500 RPM
- Cylinders: 6
Dimensions
- Overall Length: Approximately 187 inches (varies with fork length)
- Overall Width: Approximately 82 inches
- Overall Height: Approximately 120 inches (without mast)
- Wheelbase: Approximately 105 inches
- Ground Clearance: Approximately 8 inches
Performance
- Load Capacity: Approximately 15,400 lbs
- Tilt Angle: Forward 15°, Backward 10°
- Travel Speed: Approximately 21 mph (unloaded)
- Gradeability: Approximately 29% (loaded)
Weight
- Operating Weight: Approximately 20,900 lbs
Tires
- Tire Type: Pneumatic
- Front Tires: 8.25x15-14PR
- Rear Tires: 8.25x15-14PR
Brakes
- Service Brake: Hydraulic
- Parking Brake: Mechanical
Hydraulic System
- Operating Pressure: Approximately 3,500 psi
- Hydraulic Tank Capacity: Approximately 26 gallons

Global Fleet Solutions
Sales Rep: 1 888 451 2398
17300 W Valley Hwy
Seattle, WA 98188

Get Quote

Get Flyer

Global Fleet Solutions
17300 W Valley Hwy

Seattle, WA 98188

1 888 451 2398

2019 Cat 323

4M Iron

Used

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 17860
MAKE:: Cat
MODEL:: 323
PRICE: $112,750 USD

Engine
- Model: CAT C7.1
- Net Power: 172 HP
- Bore: 4.13 in
- Stroke: 5.31 in
- Displacement: 428 in³
- Emission Standards: EPA Tier 4 Final
Dimensions
- Overall Length: 31.75 ft
- Overall Width: 9.81 ft
- Overall Height: 10.2 ft
Operational Specifications
- Operating Weight: 50,706 lbs
- Fuel Tank Capacity: 86.6 gallons
Hydraulic System
- Main System - Maximum Flow: 143 gallons/min
- Maximum Pressure - Equipment: 5,076 psi
- Maximum Pressure - Travel: 4,419 psi
Undercarriage
- Track Length: 14.76 ft
- Shoe Width: 31.5 in
Performance
- Maximum Travel Speed: 3.5 mph
- Maximum Digging Depth: 21.92 ft
- Maximum Reach at Ground Level: 33.75 ft
- Bucket Capacity: 0.76 to 2.32 yd³
Cab
- ROPS: ISO 12117-2:2008 certified
- Sound Level: 72 dB(A)
- Air Conditioning: Automatic climate control

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

1989 Cat 416

National Equipment, LLC

Used

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 672
MAKE:: Cat
MODEL:: 416
PRICE: $22,000 USD

**General Specifications**

Manufacturer: Cat
Model Number: 416
Subtype: Earth Moving and Construction

**Engine**

Engine Model: Cat C3.6
Gross Power: 100 horsepower
Net Power: 95 horsepower
Displacement: 220 cubic inches

**Weights**

Operating Weight: 14,675 pounds
Maximum Weight: 15,673 pounds

**Dimensions**

Overall Length: 23 feet 5 inches
Width Over Tires: 7 feet 1 inch
Height to Top of Cab: 11 feet 9 inches
Wheelbase: 7 feet 4 inches

**Performance**

Standard Digging Depth: 14 feet 3 inches
Maximum Reach at Full Height: 23 feet 8 inches
Bucket Digging Force: 12,500 pounds-force
Stick Digging Force: 8,800 pounds-force
Backhoe Bucket Capacity: 0.75 cubic yards

**Hydraulic System**

Hydraulic System Type: Load Sensing
Maximum Pump Capacity: 43 gallons per minute
System Pressure: 3,700 psi

**Tires**

Standard Tire Size: 4WD 12.5/80-18 rear, 21L-24 front

**Transmission**

Transmission Type: Power Shuttle
Number of Forward Gears: 4
Number of Reverse Gears: 4
Top Forward Speed: 25 miles per hour

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

2007 Broderson IC-200

National Lift Truck, Inc.

Buy or Rent

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: BC30-010
MAKE:: Broderson
MODEL:: IC-200
PRICE: CALL FOR PRICE

INDUSTRIAL CRANE W/ 15'6", FULL CAB, 4WS

Model Number: IC-200
Manufacturer: Broderson
Subtype: Earth Moving and Construction

Performance

Maximum Lift Capacity: 36,000 lbs
Travel Speed: 15 mph
Turning Radius: 13'-6"

Dimensions

Overall Length: 14'-7"
Overall Width: 7'-10"
Height: 7'-11"
Wheelbase: 9'-0"
Ground Clearance: 12"-15"

Engine

Type: Diesel
Horsepower: 160 HP

Operational

Fuel Capacity: 30 gallons
Hydraulic System Fluid Capacity: 41 gallons
Axles: 4-wheel steer
Tire Size: 385/65D22.5

Safety Features

Anti-Two Block Alarm
Outrigger Monitoring System
Operator Presence System

National Lift Truck, Inc.
Geoff Dietz: 630-381-5748
3333 Mt. Prospect Rd.
Franklin Park, IL 60131

Get Quote

Get Flyer

1998 Broderson IC-200-2C

National Lift Truck, Inc.

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: BC30-004
MAKE:: Broderson
MODEL:: IC-200-2C
PRICE: CALL FOR PRICE

37' BOOM, 15' OFFSET JIB, FOAM FILLED TIRES, 4WD 1210 HOURs

Engine
- Type: Diesel Engine
- Power: 60 horsepower
Dimensions
- Length: 15 feet
- Width: 7.5 feet
- Height: 8 feet
- Wheelbase: 8 feet
- Ground Clearance: 1 foot
Weight
- Operating Weight: 28,000 pounds
Performance
- Max Travel Speed: 20 mph
- Gradeability: 30%
- Turning Radius: 13 feet
Hydraulic System
- Hydraulic Pressure: 2,500 psi
- Hydraulic Flow: 25 gallons per minute
Tires
- Type: All-terrain
- Size: 16 inches
Fuel Capacity
- Tank Capacity: 30 gallons
Lift Capacity
- Load Capacity: 20,000 pounds

National Lift Truck, Inc.
Geoff Dietz: 630-381-5748
3333 Mt. Prospect Rd.
Franklin Park, IL 60131

Get Quote

Get Flyer

2007 Broderson IC-200-3F

National Lift Truck, Inc.

Buy or Rent

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: BC30-008
MAKE:: Broderson
MODEL:: IC-200-3F
PRICE: CALL FOR PRICE

37' Boom, 15' Jib, Full Cab, 4WD/ Steer, 3144 Hours

General Specifications
- Model Number: IC-200-3F
- Manufacturer: Broderson
- Subtype: Earth Moving and Construction
Dimensions
- Overall Length: 22.6 feet
- Overall Width: 7.9 feet
- Overall Height: 7.9 feet
- Wheelbase: 9.1 feet
- Ground Clearance: 1.1 feet
Performance
- Maximum Speed: 20 mph
- Turning Radius: 15 feet
- Drawbar Pull: 15,000 lbs
- Gradeability: 75%
Weight
- Total Weight: 35,000 lbs
- Front Axle Weight: 18,500 lbs
- Rear Axle Weight: 16,500 lbs
Engine
- Type: Diesel Engine
- Power Rating: 173 HP
- Fuel Capacity: 40 gallons
Tires
- Type: Pneumatic
- Size: 385/65R22.5
Brakes
- Type: Hydraulic
- Parking Brake: Spring Applied, Air Released
Hydraulic System
- Pump Type: Gear
- System Pressure: 2,500 psi
- Hydraulic Capacity: 55 gallons
Operators Cabin
- Type: Enclosed
- Air Conditioning: Optional
- Heating: Standard

National Lift Truck, Inc.
Geoff Dietz: 630-381-5748
3333 Mt. Prospect Rd.
Franklin Park, IL 60131

Get Quote

Get Flyer

2006 Broderson IC-80-3G

National Lift Truck, Inc.

Buy or Rent

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: BC15-017
MAKE:: Broderson
MODEL:: IC-80-3G
PRICE: CALL FOR PRICE

30' BOOM, 10' JIB, 4 WHEEL STEER, 2 WHEEL DRIVE, 2036 Hour

Unit Specifications
- Model Number: IC-80-3G
- Manufacturer: Broderson
- Subtype: Earth Moving and Construction
Dimensions
- Overall Length: 20.5 ft
- Overall Width: 7.5 ft
- Overall Height: 8.5 ft
- Wheelbase: 7.5 ft
Weight
- Gross Weight: 18,500 lbs
- Counterweight: Integral to Frame
Engine
- Engine Type: Diesel
- Engine Power: 74 HP
- Fuel Capacity: 30 gallons
Performance
- Max Speed: 22 mph
- Gradeability: 70%
- Turning Radius: 14 ft
Tire Specifications
- Tire Type: Industrial Pneumatic
- Tire Size: 10.00 x 15
Load Handling
- Max Lift Capacity: 17,000 lbs
- Fork Length: Varies

National Lift Truck, Inc.
Geoff Dietz: 630-381-5748
3333 Mt. Prospect Rd.
Franklin Park, IL 60131

Get Quote

Get Flyer

2005 Broderson IC-200-3F

National Lift Truck, Inc.

Buy or Rent

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: BC30-003
MAKE:: Broderson
MODEL:: IC-200-3F
PRICE: CALL FOR PRICE

Carry Deck Crane, 4 Wheel Steer, 2WD, 2852 Hours

General Specifications
- Model Number: IC-200-3F
- Manufacturer: Broderson
- Subtype: Earth Moving and Construction
Dimensions
- Overall Length: 22.6 feet
- Overall Width: 7.9 feet
- Overall Height: 7.9 feet
- Wheelbase: 9.1 feet
- Ground Clearance: 1.1 feet
Performance
- Maximum Speed: 20 mph
- Turning Radius: 15 feet
- Drawbar Pull: 15,000 lbs
- Gradeability: 75%
Weight
- Total Weight: 35,000 lbs
- Front Axle Weight: 18,500 lbs
- Rear Axle Weight: 16,500 lbs
Engine
- Type: Diesel Engine
- Power Rating: 173 HP
- Fuel Capacity: 40 gallons
Tires
- Type: Pneumatic
- Size: 385/65R22.5
Brakes
- Type: Hydraulic
- Parking Brake: Spring Applied, Air Released
Hydraulic System
- Pump Type: Gear
- System Pressure: 2,500 psi
- Hydraulic Capacity: 55 gallons
Operators Cabin
- Type: Enclosed
- Air Conditioning: Optional
- Heating: Standard

National Lift Truck, Inc.
Geoff Dietz: 630-381-5748
3333 Mt. Prospect Rd.
Franklin Park, IL 60131

Get Quote

Get Flyer

2007 JCB VM115D

J&J Truck Sales, Inc.

Used

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 800664
MAKE:: JCB
MODEL:: VM115D
PRICE: $49,500 USD

General Specifications
- Model Number: VM115D
- Manufacturer: JCB
- Subtype: Earth Moving and Construction
Engine
- Engine Type: Diesel
- Engine Power: Approximately 148 HP
- Displacement: 4.4 liters (Approx. 268 cubic inches)
- Number of Cylinders: 4
Dimensions
- Length: Approximately 18.5 feet
- Width: Approximately 7.2 feet
- Height: Approximately 10 feet
- Wheelbase: Approximately 9.8 feet
- Ground Clearance: Approximately 1.6 feet
Weights
- Operating Weight: Approximately 25,352 lbs
Performance
- Travel Speed: Approximately 7.5 mph
- Gradeability: 35%
- Drum Width: Approximately 6.9 feet
Hydraulic System
- Hydraulic Tank Capacity: Approximately 21 gallons
- Hydraulic System Pressure: Approximately 3,480 psi
Tires
- Tire Size: 23.1 x 26
Fuel
- Fuel Capacity: Approximately 58 gallons

J&J Truck Sales, Inc.
Forrest Dodson: 434-215-0641
11453 US Hwy. 29
Chatham, VA 24531

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

J&J Truck Sales, Inc.
11453 US Hwy. 29

Chatham, VA 24531

434-215-0641

Athey 7-11D

National Equipment, LLC

Used

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 9613
MAKE:: Athey
MODEL:: 7-11D
PRICE: $12,500 USD

Engine Specifications
- Type: Diesel
- Horsepower: 200 hp
- Cylinders: 6
- Displacement: 540 ci
Transmission
- Type: Manual
- Speeds: 4 forward, 1 reverse
Dimensions
- Length: 25 feet
- Width: 8 feet
- Height: 10 feet
- Wheelbase: 16 feet
- Ground Clearance: 14 inches
Weight
- Operating Weight: 50,000 lbs
Tires
- Tire Size: 23.5-25
Performance
- Travel Speed: 25 mph
- Fuel Capacity: 100 gallons
- Load Capacity: 27,000 lbs
Hydraulics
- System Pressure: 3,000 psi
- Hydraulic Flow: 45 gpm

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

Other Misc Allied Product

National Equipment, LLC

Used

DETAILS

DESCRIPTION

CONTACT

STK#:: 9779
PRICE: CALL FOR PRICE

104" wide, Came off CAT 936, Has some weld repairs.

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

Get Quote

Get Flyer

Other Misc Allied Product

Niagara Frontier Equipment Sales, Inc.

Used

DETAILS

CONTACT

FINANCE

STK#:: 36294
PRICE: $4,500 USD

Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

Niagara Frontier Equipment Sales, Inc.
4060 Lake Avenue

1979 VersaLift SHV35PI

National Equipment, LLC

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 4240
MAKE:: VersaLift
MODEL:: SHV35PI
PRICE: $9,000 USD

Boom: Versalift SHV-35-P1 Ser# 147807

General Specifications
- Model Number: SHV35PI
- Manufacturer: VersaLift
- Type: Forklift
- Subtype: Earth Moving and Construction
Dimensions
- Overall Length: 15.5 feet
- Overall Width: 5.5 feet
- Overall Height: 8.0 feet
- Wheelbase: 7.0 feet
- Ground Clearance: 6.5 inches
Performance
- Lift Capacity: 7,700 lbs
- Travel Speed: 12 mph
- Turning Radius: 9.8 feet
Engine
- Engine Type: Diesel
- Engine Power: 80 HP
- Fuel Capacity: 20 gallons
Brakes
- Brake Type: Hydraulic
- Parking Brake: Manual
Tires
- Tire Type: Pneumatic
- Front Tires: 23x9.00-12
- Rear Tires: 23x9.00-12
Electrical System
- Battery Voltage: 12V
- Alternator: 55A
Forks
- Fork Length: Varies
- Fork Spread: Adjustable

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

Get Quote

Get Flyer

Finance at $/mo

Cat

National Equipment, LLC

Used

DETAILS

CONTACT

FINANCE

STK#:: 150011757475
MAKE:: Cat
PRICE: $11,500 USD

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

Cat D6H

National Equipment, LLC

Used

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 9801
MAKE:: Cat
MODEL:: D6H
PRICE: $34,500 USD

Dimensions and Weights

Operating Weight: Approximately 44,203 lbs
Overall Length: Approximately 20.16 ft
Overall Width (without blade): Approximately 7.3 ft
Height (to top of cab): Approximately 10.1 ft

Engine

Engine Model: Cat 3306
Net Power: Approximately 190 hp
Displacement: 638 cu in
Cylinders: 6

Performance

Ground Speed (Forward): Approximately 6.4 mph
Ground Speed (Reverse): Approximately 7.4 mph
Drawbar Pull: Approximately 61,800 lb

Fuel and Fluids

Fuel Capacity: 90 gallons
Engine Oil Capacity: 7 gallons
Coolant System Capacity: 10 gallons

Undercarriage

Track Gauge: Approximately 6.5 ft
Shoe Width: Approximately 22 in
Track Length: Approximately 9.5 ft

Blade Specifications

Blade Width: Approximately 11 ft
Blade Capacity: Approximately 4.84 cubic yards

Hydraulics

Pump Type: Gear pump
Relief Valve Setting: Approximately 2,500 psi
Hydraulic Pump Flow: Approximately 30 gallons/min

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

Komatsu PC200-2

4M Iron

Used

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 10760
MAKE:: Komatsu
MODEL:: PC200-2
PRICE: $19,500 USD

Engine
- Model: Komatsu S6D95L
- Type: Diesel, 4-cycle, water-cooled
- Number of Cylinders: 6
- Net Power: 110 HP (82 kW)
- Displacement: 361 cubic inches (5.9 liters)
Dimensions
- Overall Length: 31.0 feet (9.45 meters)
- Overall Width: 10.0 feet (3.05 meters)
- Overall Height: 9.9 feet (3.02 meters)
- Ground Clearance: 1.4 feet (0.42 meters)
- Operating Weight: 45,000 lbs (20,412 kg)
Performance
- Travel Speed: 3.5 mph (5.6 km/h)
- Main Pump Flow Rate: 58 gallons per minute (220 liters per minute)
Undercarriage
- Shoe Width: 2.0 feet (0.6 meters)
- Track Length: 13.5 feet (4.1 meters)
Fuel Capacity
- Fuel Tank: 66 gallons (250 liters)
Hydraulic System
- Hydraulic Pump Type: Variable displacement piston pumps
- Hydraulic Tank Capacity: 35 gallons (132 liters)

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

2022 6000

Ironworks Trading Corporation

New

DETAILS

CONTACT

FINANCE

STK#:: LH-6000
MODEL:: 6000
PRICE: $379 USD

Ironworks Trading Corporation
Jon Bordeaux: 757-330-4191
1160 Harmony Rd
Norfolk, VA 23502

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

Motor Service, Inc.
130 Byassee Dr

2015 Kubota SVL75-2

Motor Service, Inc.

Buy or Rent

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: M-283
MAKE:: Kubota
MODEL:: SVL75-2
PRICE: CALL FOR PRICE

Call for sale price or rental rates! 314-731-4111

General Specifications
- Model: SVL75-2
- Manufacturer: Kubota
- Subtype: Earth Moving and Construction
Engine Specifications
- Engine Type: V3307-CR-TE4
- Gross Horsepower: 74.3 HP
- Displacement: 203 in³
- Fuel Type: Diesel
Dimensions
- Overall Length with Bucket: 142.2 inches
- Overall Width: 66 inches
- Height to Top of Cab: 83.8 inches
- Ground Clearance: 11.7 inches
- Track Width: 12.6 inches
- Track Length on Ground: 68.4 inches
Performance
- Tipping Load: 6,204 lbs
- Operating Load: 3,195 lbs
- Travel Speed: 4.7 - 7.1 mph
- Breakout Force: 6,204 lbs
Capacity
- Fuel Tank: 24.6 gallons
- Hydraulic Reservoir System: 14.6 gallons
Hydraulic System
- Pump Capacity: 17.4 gallons/min
- Auxiliary Hydraulic Flow: 24.8 gallons/min
- Hydraulic Pressure: 3,485 psi
Weight
- Operating Weight: 9,039 lbs

Motor Service, Inc.
Sales Dept.: 314 200 0520
130 Byassee Dr
Hazelwood, MO 63042

Get Quote

Get Flyer

Hazelwood, MO 63042

314 200 0520

2022 WP 116

Ironworks Trading Corporation

New

DETAILS

CONTACT

FINANCE

STK#:: 150092600148
MODEL:: WP 116
PRICE: $3,450 USD

Ironworks Trading Corporation
Jon Bordeaux: 757-330-4191
1160 Harmony Rd
Norfolk, VA 23502

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

1988 Cat EL180

National Equipment, LLC

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 005
MAKE:: Cat
MODEL:: EL180
PRICE: $26,000 USD

Cab, Hyd Q/C, 30" Bucket, Aux Hydraulics, CAT 3204,

General Specifications
- Model Number: EL180
- Manufacturer: Cat
- Subtype: Earth Moving and Construction
Engine
- Engine Power: 180 HP
- Engine Type: Diesel
- Number of Cylinders: 6
Dimensions
- Total Length: 30 ft
- Total Width: 8 ft
- Height: 10 ft
Capacities
- Fuel Tank Capacity: 100 gallons
- Hydraulic System Reservoir: 40 gallons
Weight
- Operating Weight: 40,000 lbs
Performance
- Ground Clearance: 1.5 ft
- Travel Speed: 25 mph
- Lift Capacity: 2150 lbs
- Turning Radius: 12 ft
Tires
- Type: Heavy Duty
- Tire Size: 23.5-25
Hydraulics
- Pump Flow Rate: 60 gallons/min
- System Pressure: 3000 psi
Electrical
- Voltage: 24V
- Battery Capacity: 200Ah

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

Get Quote

Get Flyer

Finance at $/mo

2013 Volvo EC250D LR

4M Iron

Used

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 12442
MAKE:: Volvo
MODEL:: EC250D LR
HOURS:: 9382 Hrs
PRICE: $73,900 USD

General Information
- Model Number: EC250D LR
- Manufacturer: Volvo
- Type: Forklift
- Subtype: Earth Moving and Construction
Engine Specifications
- Engine Model: Volvo D6J
- Type: Diesel, 4-Stroke
- Displacement: 359 cubic inches
- Power: 203 hp at 1,600 rpm
- Torque: 730 lb-ft at 1,350 rpm
Performance
- Travel Speed: 3.5 mph (depending on load)
- Drawbar Pull: 56,200 lbs
Dimensions
- Overall Length: 35.8 feet
- Width: 10.5 feet
- Height: 10.8 feet
- Ground Clearance: 1.5 feet
Weight
- Operating Weight: 54,000 lbs
Fork Specifications
- Fork Length: Varies
Tires and Wheels
- Tires: Pneumatic
- Front: 29.5 inches
- Rear: 29.5 inches
Operational Capacities
- Fuel Capacity: 108 gallons
- Hydraulic System Fluid Capacity: 50 gallons
Hydraulic System
- Pump Type: Variable Displacement Axial Piston
- Main Pumps Flow: 80 gallons per minute
- Relief Valve Pressure: 4,900 psi

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

Cat 623B

National Equipment, LLC

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 8787
MAKE:: Cat
MODEL:: 623B
PRICE: $11,000 USD

Paddle Scraper, Open ROPS,

Engine
- Model: Cat C9 ACERT
- Net Power: 304 HP
- Gross Power: 313 HP
- Cylinder Count: 6
Transmission
- Type: Power Shift
- Top Forward Speed: 28 mph
- Top Reverse Speed: 30 mph
Dimensions
- Length: 46 ft
- Width: 11 ft
- Height: 13 ft
- Wheelbase: 23 ft
Operational
- Fuel Capacity: 150 gallons
- Hydraulic System Fluid Capacity: 84 gallons
Capacity
- Heaped Capacity: 23 cubic yards
- Struck Capacity: 17.7 cubic yards
Weights
- Operating Weight: 107,540 lbs
- Front Axle Weight: 45,240 lbs
- Rear Axle Weight: 62,300 lbs
Tires
- Front Tire Size: 37.25 R35
- Rear Tire Size: 37.25 R35
Brakes
- Braking System: Full Hydraulic
Performance
- Carry Gradeability: 30%
- Steering Angle: 90 degrees

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

Get Quote

Get Flyer

Finance at $/mo

109-2677

National Equipment, LLC

Used

DETAILS

DESCRIPTION

CONTACT

STK#:: 150095162193
MODEL:: 109-2677
PRICE: CALL FOR PRICE

109-2677 3 available.

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

Get Quote

Get Flyer

109-2676

National Equipment, LLC

Used

DETAILS

DESCRIPTION

CONTACT

STK#:: 150095162219
MODEL:: 109-2676
PRICE: CALL FOR PRICE

109-2676 4 Available.

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

Get Quote

Get Flyer

78" SS GRAPPLE BUCKET

Niagara Frontier Equipment Sales, Inc.

New

DETAILS

DESCRIPTION

CONTACT

FINANCE

STK#:: 38152
MODEL:: 78" SS GRAPPLE BUCKET
PRICE: $2,350 USD

CLOSED BOTTOM GRAPPLE BUCKET FITS SS Q/A SINGLE CYLINDER

Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

Niagara Frontier Equipment Sales, Inc.
4060 Lake Avenue

2000 PF5510

National Equipment, LLC

Used

DETAILS

DESCRIPTION

CONTACT

FINANCE

STK#:: 0108
MODEL:: PF5510
PRICE: $24,500 USD

10 - 18' Screed, Cummins Diesel,

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

1990 Cat 225D LC

National Equipment, LLC

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 150096847347
MAKE:: Cat
MODEL:: 225D LC
PRICE: $22,500 USD

Fire Damage, Non Running, Bucket, Thumb, CAT 3208,

General
- Manufacturer: Cat
- Model Number: 225D LC
- Subtype: Earth Moving and Construction
Dimensions
- Overall Length: 31 ft
- Overall Width: 10 ft
- Overall Height: 10.7 ft
- Ground Clearance: 1.6 ft
- Track Length: 14 ft
- Track Width: 2.5 ft
Engine
- Engine Model: Cat 3306
- Net Power: 153 hp
- Number of Cylinders: 6
- Displacement: 640 cu in
- Fuel Tank Capacity: 90 gal
Hydraulics
- Pump Flow: 126 gal/min
- Main Relief Pressure: 4,600 psi
Performance
- Maximum Reach: 32 ft
- Maximum Digging Depth: 21 ft
- Bucket Capacity: 0.65 - 1.5 cubic yd
Operational
- Operating Weight: 55,000 lbs
- Travel Speed: 3.6 mph
- Swing Speed: 11 rpm

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

Get Quote

Get Flyer

Finance at $/mo

QUICK COUPLE

Niagara Frontier Equipment Sales, Inc.

Used

DETAILS

CONTACT

FINANCE

STK#:: 38628
MODEL:: QUICK COUPLE
PRICE: $2,995 USD

Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

Niagara Frontier Equipment Sales, Inc.
4060 Lake Avenue

2018 409306

Niagara Frontier Equipment Sales, Inc.

Used

DETAILS

CONTACT

FINANCE

STK#:: 38764
MODEL:: 409306
PRICE: $9,500 USD

Niagara Frontier Equipment Sales, Inc.
Keith Hetrick Jr.: 1 716 219 7049 x190
4060 Lake Avenue
Lockport, NY 14094

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

Niagara Frontier Equipment Sales, Inc.
4060 Lake Avenue

2022 FORK MOUNTED TELEHANDLER BUCKET 96-2.0

Ironworks Trading Corporation

New

DETAILS

CONTACT

FINANCE

STK#:: A-96-20
MODEL:: FORK MOUNTED TELEHANDLER BUCKET 96-2.0
PRICE: $3,895 USD

Ironworks Trading Corporation
Jon Bordeaux: 757-330-4191
1160 Harmony Rd
Norfolk, VA 23502

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

2022 PC91474481

Ironworks Trading Corporation

New

DETAILS

CONTACT

FINANCE

STK#:: DR-2000
MODEL:: PC91474481
PRICE: $2,995 USD

Ironworks Trading Corporation
Jon Bordeaux: 757-330-4191
1160 Harmony Rd
Norfolk, VA 23502

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

2023 LH 10000

Ironworks Trading Corporation

New

DETAILS

DESCRIPTION

CONTACT

FINANCE

STK#:: A2
MODEL:: LH 10000
PRICE: $845 USD

10,000 lb capacity Fork mounted lifting swivel hook.

Ironworks Trading Corporation
Jon Bordeaux: 757-330-4191
1160 Harmony Rd
Norfolk, VA 23502

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

1999 JCB JS260 LC

4M Iron

Used

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 16552
MAKE:: JCB
MODEL:: JS260 LC
PRICE: $49,900 USD

Engine
- Model: JCB Dieselmax Stage 3 / Tier 3
- Power: 188 hp (140 kW)
- Displacement: 408 cubic inches
Operating Specifications
- Operating Weight: 57,320 lbs
- Fuel Capacity: 125 gallons
- Hydraulic System Capacity: 84 gallons
Performance
- Maximum Digging Depth: 24 feet
- Maximum Reach at Ground Level: 37 feet
- Bucket Capacity: 0.84 - 2.13 cubic yards (varies)
- Swing Speed: 10 rpm
Dimensions
- Total Length: 36 feet
- Width: 10 feet
- Height: 10.3 feet
Tracks
- Track Width: 31.5 inches
- Ground Pressure: 5.55 psi
Cab
- ROPS/FOPS cab as standard
- Air conditioning available

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo

2014 Cat CB LINKAGE

National Equipment, LLC

Used

DETAILS

DESCRIPTION

SPECS

CONTACT

STK#:: 150101422954
MAKE:: Cat
MODEL:: CB LINKAGE
PRICE: CALL FOR PRICE

Ex Government, CB Linkage, 85 mm pin and 90mm pin,

General Specifications
- Model Number: CB LINKAGE
- Manufacturer: Cat
- Subtype: Earth Moving and Construction
Dimensions
- Length: 20 feet
- Width: 8 feet
- Height: 10 feet
Weight
- Operating Weight: 8,800 lbs
Engine
- Type: Diesel
- Power: 74 HP
- Transmission: Automatic
Performance
- Lifting Capacity: 8,000 lbs
- Travel Speed: 18 mph
Hydraulic System
- Hydraulic Flow: 25 gallons per minute
- System Pressure: 1,000 psi
Operational Data
- Turning Radius: 11 feet
- Fuel Tank Capacity: 30 gallons
Tires
- Tire Size: 12x16.5
- Tire Type: Pneumatic

National Equipment, LLC
Jim Gagliardi: 559-517-3272
12201 Hwy 99 (at Ave 12)
Madera, CA 93638

Get Quote

Get Flyer

2021 Cat 320GC

4M Iron

Used

DETAILS

SPECS

CONTACT

FINANCE

STK#:: 20391
MAKE:: Cat
MODEL:: 320GC
PRICE: $214,900 USD

Engine
- Model: Cat C4.4
- Net Power: 162 HP
- Gross Power: 169 HP
- Bore: 4.1 inches
- Stroke: 5.0 inches
- Displacement: 269 cubic inches
Operating Specifications
- Operating Weight: 48,281 lbs
- Fuel Tank Capacity: 86 gallons
- Hydraulic Tank Capacity: 47 gallons
Hydraulic System
- Main System - Maximum Flow: 61 gallons per minute
- Maximum Pressure - Equipment: 5076 psi
- Maximum Pressure - Travel: 5076 psi
- Maximum Pressure - Swing: 4061 psi
Performance
- Swing Speed: 11.5 RPM
- Maximum Travel Speed: 3.4 mph
- Drawbar Pull: 47,000 lbs
Dimensions
- Transport Width: 9.8 ft
- Transport Length: 31.8 ft
- Height to Top of Cab: 9.8 ft
- Ground Clearance: 1.5 ft
- Tail Swing Radius: 9.2 ft

4M Iron
Mike Finley: 843-594-0077
344 Winningham Road,
St. George, SC 29477

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.

Get Quote

Get Flyer

Finance at $/mo