100 Forklifts and Material Handling Equipment For Sale
Browse our complete selection of low priced used forklifts, lift trucks & material handling products for sale at locations near you. Compare prices here!
#5504 Verona Virginia Brandon McClendon: 225-772-7839 961 Laurel Hill Road Verona, VA 24482
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
**General Specifications**
- Model Number: 30H-RCP-B001
- Manufacturer: Cascade
- Type: Attachment
- Subtype: Paper Roll Clamps
**Dimensions**
- Arm Length: varies
- Frame Width: approximately 40 inches
- Clamp Opening Range: approximately 10 to 60 inches
**Capacity**
- Load Capacity: 6,000 lbs
**Performance**
- Rotation: 360 degrees continuous
- Clamping Force: adjustable
- Cycle Speed: approximately 8 seconds for full rotation
**Hydraulic Requirements**
- Operating Pressure: 2,000 - 2,500 PSI
- Flow Rate: 10 - 15 GPM
**Material & Construction**
- Material: High-strength steel
- Finish: Powder-coated
**Weight**
- Attachment Weight: approximately 1,500 lbs
**Additional Features**
- Valve Options: Available for different flow rates
- Pads: Rubber-coated for minimal roll damage
- Mounting Class: Class II or III depending on configuration
- Control Options: Manual or hydraulic controls available
MONTHLY RENTAL
$1 USD
WEEKLY RENTAL
$1 USD
DAILY RENTAL
$1 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
ATTACHCO Andrew Forde: 310-308-9893 665 W Cowles St Long Beach , CA 90813
Clamp Opening Range: Approximately 2 inches to 67 inches
Arm Length: Varies
Frame Width: Approximately 47 inches
Weight: Approximately 1,500 lbs
Maximum Roll Diameter: Up to 67 inches
Minimum Roll Diameter: Approximately 2 inches
Performance:
Load Capacity: 5,500 lbs
Optimal Operating Pressure: 2,000 psi
Hydraulic Flow: Minimum 7 gal/min
Features:
Side shifting function for better maneuverability
Non-marking rubber pads to protect paper rolls
360-degree rotation capability
Durable construction for heavy-duty use
Compatible with various forklift models
Operational Requirements:
Requires hydraulic system
Mounting Class: Varies based on specific forklift configuration
MONTHLY RENTAL
$1 USD
WEEKLY RENTAL
$1 USD
DAILY RENTAL
$1 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
ATTACHCO Andrew Forde: 310-308-9893 665 W Cowles St Long Beach , CA 90813
**Specifications of Model 77F-RCP Paper Roll Clamp**
**General Information**
- **Manufacturer:** Cascade
- **Model Number:** 77F-RCP
- **Type:** Attachment
- **Subtype:** Paper Roll Clamps
**Performance**
- **Capacity:** Varies with model specifications
- **Rotation:** 360 degrees continuous
- **Opening Range:** Varies according to needs
- **Clamp Force:** Adjustable to accommodate paper types
- **Roll Diameter Capacity:** Varies, designed for different roll sizes
- **Horizontal and Vertical Speed:** Suitable for operational needs
**Dimensions**
- **Arm Height:** Varies based on configuration
- **Thickness:** Designed for roll stability and strength
- **Length:** Varies based on requirements
- **Width:** Proportional to arm size for balance
**Weights**
- **Attachment Weight:** Varies depending on configuration
- **Load Center:** Standard based on industry practices
**Hydraulic Specifications**
- **Pressure Requirement:** Typically ranges in normal operational psi
- **Hydraulic Flow:** Adjustable to accommodate different operations
**Additional Features**
- **Endurance:** Built for heavy-duty use and longevity
- **Material Construction:** Made from high-strength steel for durability
- **Ease of Use:** Designed for efficient loading and unloading
- **Safety Features:** Adjustable clamps to prevent roll damage
- **Versatility:** Suitable for various roll types and sizes
**Installation**
- **Mounting Options:** Available for different forklift configurations
- **Compatibility:** Designed to fit with multiple forklift brands and models
**Specifications of Model 77F-RCP Paper Roll Clamp**
**General Information**
- **Manufacturer:** Cascade
- **Model Number:** 77F-RCP
- **Type:** Attachment
- **Subtype:** Paper Roll Clamps
**Performance**
- **Capacity:** Varies with model specifications
- **Rotation:** 360 degrees continuous
- **Opening Range:** Varies according to needs
- **Clamp Force:** Adjustable to accommodate paper types
- **Roll Diameter Capacity:** Varies, designed for different roll sizes
- **Horizontal and Vertical Speed:** Suitable for operational needs
**Dimensions**
- **Arm Height:** Varies based on configuration
- **Thickness:** Designed for roll stability and strength
- **Length:** Varies based on requirements
- **Width:** Proportional to arm size for balance
**Weights**
- **Attachment Weight:** Varies depending on configuration
- **Load Center:** Standard based on industry practices
**Hydraulic Specifications**
- **Pressure Requirement:** Typically ranges in normal operational psi
- **Hydraulic Flow:** Adjustable to accommodate different operations
**Additional Features**
- **Endurance:** Built for heavy-duty use and longevity
- **Material Construction:** Made from high-strength steel for durability
- **Ease of Use:** Designed for efficient loading and unloading
- **Safety Features:** Adjustable clamps to prevent roll damage
- **Versatility:** Suitable for various roll types and sizes
**Installation**
- **Mounting Options:** Available for different forklift configurations
- **Compatibility:** Designed to fit with multiple forklift brands and models
**Specifications of Model 77F-RCP Paper Roll Clamp**
**General Information**
- **Manufacturer:** Cascade
- **Model Number:** 77F-RCP
- **Type:** Attachment
- **Subtype:** Paper Roll Clamps
**Performance**
- **Capacity:** Varies with model specifications
- **Rotation:** 360 degrees continuous
- **Opening Range:** Varies according to needs
- **Clamp Force:** Adjustable to accommodate paper types
- **Roll Diameter Capacity:** Varies, designed for different roll sizes
- **Horizontal and Vertical Speed:** Suitable for operational needs
**Dimensions**
- **Arm Height:** Varies based on configuration
- **Thickness:** Designed for roll stability and strength
- **Length:** Varies based on requirements
- **Width:** Proportional to arm size for balance
**Weights**
- **Attachment Weight:** Varies depending on configuration
- **Load Center:** Standard based on industry practices
**Hydraulic Specifications**
- **Pressure Requirement:** Typically ranges in normal operational psi
- **Hydraulic Flow:** Adjustable to accommodate different operations
**Additional Features**
- **Endurance:** Built for heavy-duty use and longevity
- **Material Construction:** Made from high-strength steel for durability
- **Ease of Use:** Designed for efficient loading and unloading
- **Safety Features:** Adjustable clamps to prevent roll damage
- **Versatility:** Suitable for various roll types and sizes
**Installation**
- **Mounting Options:** Available for different forklift configurations
- **Compatibility:** Designed to fit with multiple forklift brands and models
**Specifications of Model 77F-RCP Paper Roll Clamp**
**General Information**
- **Manufacturer:** Cascade
- **Model Number:** 77F-RCP
- **Type:** Attachment
- **Subtype:** Paper Roll Clamps
**Performance**
- **Capacity:** Varies with model specifications
- **Rotation:** 360 degrees continuous
- **Opening Range:** Varies according to needs
- **Clamp Force:** Adjustable to accommodate paper types
- **Roll Diameter Capacity:** Varies, designed for different roll sizes
- **Horizontal and Vertical Speed:** Suitable for operational needs
**Dimensions**
- **Arm Height:** Varies based on configuration
- **Thickness:** Designed for roll stability and strength
- **Length:** Varies based on requirements
- **Width:** Proportional to arm size for balance
**Weights**
- **Attachment Weight:** Varies depending on configuration
- **Load Center:** Standard based on industry practices
**Hydraulic Specifications**
- **Pressure Requirement:** Typically ranges in normal operational psi
- **Hydraulic Flow:** Adjustable to accommodate different operations
**Additional Features**
- **Endurance:** Built for heavy-duty use and longevity
- **Material Construction:** Made from high-strength steel for durability
- **Ease of Use:** Designed for efficient loading and unloading
- **Safety Features:** Adjustable clamps to prevent roll damage
- **Versatility:** Suitable for various roll types and sizes
**Installation**
- **Mounting Options:** Available for different forklift configurations
- **Compatibility:** Designed to fit with multiple forklift brands and models
TISSUE ROLL PAPER ROLL CLAMP - SWING FRAME
RENTAL ONLY
Manufacturer: Cascade
Model Number: 90F-SCP-SP
Type: Attachment
Subtype: Paper Roll Clamps
Specifications
Capacity: 9,000 lbs
Clamp Type: Short Arm Type
Performance
Rotation: 360 degrees continuous
Opening Range: 19.7" to 61" (50 cm to 155 cm)
Recommended Operating Pressure: 2,300 psi
Frame and Construction
Material: High strength steel
Arm Thickness: 2.8" (7 cm)
Hydraulics
Number of Hydraulic Functions: Two
Hydraulic Flow Range: 18-22 GPM
Weight and Dimensions
Weight: 3,100 lbs
Width: 66" (168 cm)
Height: 52" (132 cm)
Depth: 28" (71 cm)
MONTHLY RENTAL
$930 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
ATTACHCO Andrew Forde: 310-308-9893 665 W Cowles St Long Beach , CA 90813
Recommended Forklift Class: Class II and Class III
Features
Hydraulic Function: 2 required
Quick-attach system for easy installation
Heavy-duty construction for durability
MONTHLY RENTAL
$1 USD
WEEKLY RENTAL
$1 USD
DAILY RENTAL
$1 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
ATTACHCO Andrew Forde: 310-308-9893 665 W Cowles St Long Beach , CA 90813
Martin Industrial Truck / Cleveland Forklift Kurt Paskert: 216-609-3999 13811 Enterprise Ave. Cleveland, OH 44135
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close