Search Across All Categories
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
CAPACITY RANGE
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
minimum raised height
ANY
Minus Plus
ANY 500
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
CAPACITY RANGE
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
CAPACITY RANGE
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
CAPACITY RANGE
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
price
ANY - ANY
Minus Plus
ANY ANY
Minus Plus
YEAR RANGE
1950 - 2026
Minus Plus
1950 2026
Minus Plus
hour meter
ANY - ANY
Minus Plus
ANY ANY
Minus Plus

17 Forklifts and Material Handling Equipment For Sale

Browse our complete selection of low priced used forklifts, lift trucks & material handling products for sale at locations near you. Compare prices here!
sort by:
0 SELECTED
CLEAR
SHARE
COMPARE
2019 Doosan D25G
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
A4142
MAKE:
Doosan
MODEL:
D25G
MAST TYPE:
Three Stage
MAST - LOWERED:
85 in
MAST - RAISED:
185 in
FUEL:
Diesel
HOURS:
7900 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
CALL FOR PRICE
2019 Doosan D25G 5,000LBS CAPACITY
  • Manufacturer: Doosan
  • Model Number: D25G
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type Used: Diesel
  • Performance:
    • Load Capacity: 5,000 lbs
    • Travel Speed (laden): Approximately 11 mph
    • Lifting Speed (laden): Approx. 108 ft/min
  • Dimensions:
    • Overall Length (without forks): 108 inches
    • Overall Width: 47 inches
    • Overall Height: 85 inches
    • Wheelbase: 66 inches
    • Ground Clearance: 5 inches
  • Weight:
    • Service Weight: 8,110 lbs
  • Engine:
    • Engine Manufacturer: Doosan
    • Engine Model: G424F (General specification - Could vary based on production)
    • Rated Power: Approximately 51 hp
    • Displacement: 2.4 L
  • Tires:
    • Tire Type: Pneumatic
    • Front Tires: 7.00-12
    • Rear Tires: 6.00-9
  • Steering System:
    • Type: Hydraulic power steering
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
2020 Linde H80
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
CONTACT
STK#:
A4043
MAKE:
Linde
MODEL:
H80
MAST TYPE:
Two Stage
MAST - LOWERED:
139 in
MAST - RAISED:
177 in
FUEL:
Diesel
SIDESHIFTER:
YES
CAPACITY:
16000 lbs
PRICE
CALL FOR PRICE
2020 Linde H80 16,000LBS
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
2019 Toyota 8FGU30
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
P5680
MAKE:
Toyota
MODEL:
8FGU30
MAST TYPE:
Three Stage
MAST - LOWERED:
83 in
MAST - RAISED:
189 in
FUEL:
LP Gas
HOURS:
5524 Hrs
SIDESHIFTER:
YES
CAPACITY:
6000 lbs
PRICE
CALL FOR PRICE
2019 Toyota 8FGU30 6000LBS
  • General Information
    • Model Number: 8FGU30
    • Manufacturer: Toyota
    • Type: Forklift
  • Engine
    • Engine Type: 4-cylinder, 4-cycle
    • Fuel Type: Gasoline
    • Displacement: 2.2 liters (134 cubic inches)
  • Dimensions
    • Overall Length: Approximately 95 inches
    • Overall Width: Approximately 47 inches
    • Overall Height: Approximately 85 inches (without mast)
    • Wheelbase: Approximately 63 inches
  • Weight
    • Approximate Weight: 9,000 lbs
  • Capacity
    • Load Capacity: 6,000 lbs
  • Performance
    • Travel Speed: Approximately 11 mph (unloaded)
    • Lift Speed: Approximately 59 feet per minute (unloaded)
    • Gradeability: Approximately 22% (unloaded)
  • Chassis
    • Tire Type: Pneumatic
    • Brakes: Wet disc
    • Steering: Hydrostatic power steering
  • Hydraulics
    • Hydraulic System Pressure: Approximately 2,800 psi
  • Forks
    • Fork Length: Varies
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
2012 Yale GLP050VXNVSE084
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
A4311
MAKE:
Yale
MODEL:
GLP050VXNVSE084
MAST TYPE:
Three Stage
MAST - LOWERED:
84 in
MAST - RAISED:
187 in
FUEL:
LP Gas
HOURS:
6323 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
CALL FOR PRICE
2012 YALE NEWLY PAINTED LPG PNEUMATIC
  • Manufacturer: Yale
  • Model Number: GLP050VXNVSE084
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: LP Gas
  • Performance
    • Load Capacity: 5,000 lbs
    • Drive Speed: Approximately 12-14 mph (unloaded)
    • Turning Radius: Approximately 87-94 inches
  • Dimensions
    • Overall Width: Approximately 48 inches
    • Overall Length: Varies (dependent on fork length)
    • Wheelbase: Approximately 70 inches
    • Ground Clearance: Approximately 5.5 inches
  • Powertrain
    • Engine Type: LP Gas Engine
    • Transmission: Powershift Transmission
    • Drive Control: Dual Pedal Control
  • Tires
    • Tire Type: Pneumatic
    • Number of Wheels: 4
  • Additional Features
    • Operator Compartment: Ergonomically designed for comfort
    • Instrumentation: Includes digital display for critical information
    • Safety Features: Includes seat belts and overhead guard
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
2015 Yale GLP050VXNDAE084
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
A3979
MAKE:
Yale
MODEL:
GLP050VXNDAE084
MAST TYPE:
Three Stage
MAST - LOWERED:
84 in
MAST - RAISED:
189 in
FUEL:
LP Gas
HOURS:
8839 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
CALL FOR PRICE
2015 YALE NEWLY PAINTED LPG PNEUMATIC
  • General Information
    • Model Number: GLP050VXNDAE084
    • Manufacturer: Yale
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Width: 48 inches
    • Overall Length to Fork Face: Varies
    • Wheelbase: 70 inches
  • Weight
    • Service Weight: Approximately 9,300 pounds
  • Performance
    • Load Capacity: 5,000 pounds
    • Travel Speed Unladen: 11.2 mph
    • Lift Speed: 110 feet per minute
    • Power: 47 horsepower
  • Wheels and Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 7.00-12
    • Rear Tire Size: 6.00-9
  • Engine
    • Engine Make: Mazda
    • Engine Model: 2.2L
    • Engine Type: LP Gas
  • Hydraulics
    • Hydraulic System Pressure: 2,500 psi
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
2006 Cat GC45KS1
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
P5834
MAKE:
Cat
MODEL:
GC45KS1
MAST TYPE:
Three Stage
MAST - LOWERED:
91 in
MAST - RAISED:
189 in
FUEL:
LP Gas
HOURS:
4789 Hrs
SIDESHIFTER:
YES
CAPACITY:
10000 lbs
PRICE
CALL FOR PRICE
2006 NEWLY PAINTED CAT 10,000
  • General Specifications
    • Model Number: GC45KS1
    • Manufacturer: Cat
    • Type: Forklift
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Length: 120.4 inches
    • Overall Width: 56.9 inches
    • Height to Top of Overhead Guard: 84 inches
    • Wheelbase: 70.9 inches
    • Ground Clearance: 4.7 inches
  • Performance
    • Rated Capacity: 9,000 lbs
    • Travel Speed (Loaded): 11.8 mph
    • Travel Speed (Unloaded): 12.4 mph
    • Lift Speed (Loaded): 98 ft/min
    • Lift Speed (Unloaded): 110 ft/min
    • Lowering Speed (Loaded): 104 ft/min
    • Gradeability (Loaded): 19%
    • Turning Radius: 105.3 inches
  • Engine Specifications
    • Engine Model: Mitsubishi 4G63
    • Power: 83 hp @ 2,500 rpm
    • Number of Cylinders: 4
    • Displacement: 2.0 L
  • Weights
    • Service Weight: 14,700 lbs
    • Front Axle Weight (Loaded): 22,400 lbs
    • Rear Axle Weight (Loaded): 1,300 lbs
  • Tires
    • Tire Type: Cushion
    • Front Tires: 28 x 9 x 15
    • Rear Tires: 18 x 7 x 12.1
  • Hydraulic System
    • Pump Output: 19.6 GPM
    • Relief Pressure: 2,500 psi
  • Additional Features
    • Operator Presence System
    • Fully Hydrostatic Power Steering
    • Adjustable Steering Wheel
  • Forks
    • Fork Length: Varies
    • Fork Width: 6 inches
    • Fork Thickness: 2 inches
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
2012 Hyster H50FT
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
A4326
MAKE:
Hyster
MODEL:
H50FT
MAST TYPE:
Three Stage
MAST - LOWERED:
84 in
MAST - RAISED:
189 in
FUEL:
LP Gas
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
CALL FOR PRICE
2012 HYSTER NEWLY PAINTED LPG
  • General Specifications
    • Manufacturer: Hyster
    • Model: H50FT
    • Type: Forklift
    • Power Source: Internal combustion (diesel, LPG, or gasoline)
    • Operator Position: Seated
  • Dimensions
    • Overall Width: Approximately 3.9 feet
    • Overall Length (without forks): Approximately 8.5 feet
    • Overall Height (cab): Approximately 7 feet
    • Wheelbase: Approximately 5.4 feet
    • Ground Clearance: Approximately 5.5 inches
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed (laden/unladen): Approximately 11 mph / 12 mph
    • Lift Speed (laden/unladen): Approximately 110 feet per minute / 120 feet per minute
    • Gradeability (laden): Approximately 26%
    • Gradeability (unladen): Approximately 34%
  • Engine
    • Engine Type: Kubota or GM
    • Fuel Type: Diesel, LPG, or gasoline
    • Power Output: Varies (typically around 63 HP for diesel or 59 HP for LPG/gasoline)
  • Chassis
    • Steering: Hydrostatic power steering
    • Brakes: Hydraulic, wet disc
    • Tires: Pneumatic or cushion
  • Hydraulic System
    • Pump Type: Gear type
    • Hydraulic Pressure: Approximately 2500 psi
  • Additional Features
    • Adjustable steering column
    • Comfortable operator's seat with suspension
    • Standard safety features such as seatbelt and warning lights
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
2014 Yale GLP060VXNVRE087
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
A3746
MAKE:
Yale
MODEL:
GLP060VXNVRE087
MAST TYPE:
Three Stage
MAST - LOWERED:
85 in
MAST - RAISED:
181 in
FUEL:
LP Gas
SIDESHIFTER:
YES
CAPACITY:
6000 lbs
PRICE
CALL FOR PRICE
2014 YALE NEWLY PAINTED LPG PNEUMATIC
  • Model Number: GLP060VXNVRE087
  • Manufacturer: Yale
  • Type: Forklift
  • Fuel Type: LP Gas
  • General Specifications:
    • Load Capacity: 6,000 lbs
    • Power Type: LPG
    • Tire Type: Pneumatic
  • Engine Specifications:
    • Engine Model: PSI 2.4L
    • Engine Power: Approximately 62 HP
  • Dimensions:
    • Overall Length to Face of Forks: Approximately 101 inches
    • Overall Width: 46 inches
    • Height to Top of Overhead Guard: 85 inches
    • Wheelbase: 70 inches
  • Performance:
    • Travel Speed: Approximately 12.4 mph
    • Lift Speed: Varies depending on load
    • Gradeability: 15% with load
  • Fork Specifications:
    • Fork Length: Varies
    • Fork Width: 4 inches
    • Fork Thickness: 1.8 inches
  • Additional Features:
    • Seat: Fully adjustable suspension seat
    • Steering: Power steering
    • Brakes: Hydraulic
    • Operator Display: Includes diagnostic and performance modes
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
1997 Taylor GT300
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
P5518
MAKE:
Taylor
MODEL:
GT300
MAST TYPE:
Two Stage
MAST - LOWERED:
150 in
MAST - RAISED:
156 in
FUEL:
Diesel
HOURS:
5163 Hrs
SIDESHIFTER:
YES
CAPACITY:
30000 lbs
PRICE
CALL FOR PRICE
1997 NEWLY PAINTED TAYLOR 30,000LBS
  • General Specifications
    • Model Number: GT300
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Varies (excluding forks)
    • Overall Width: Approximately 8 feet
    • Overall Height (to top of overhead guard): Approximately 10 feet
    • Ground Clearance: Approximately 1 foot
    • Wheelbase: Approximately 9 feet
  • Performance
    • Load Capacity: 30,000 lbs
    • Travel Speed: Approximately 15 mph (unloaded)
    • Lift Speed: Approximately 60 feet per minute (unloaded)
    • Gradeability: Approximately 20% (loaded)
  • Powertrain
    • Engine Type: Diesel
    • Engine Power: Approximately 225 HP
    • Transmission: Powershift
    • Number of Speeds: 3 forward / 2 reverse
  • Chassis
    • Tire Type: Pneumatic
    • Tire Quantity: 4
  • Weights
    • Service Weight: Approximately 42,000 lbs
    • Front Axle Load (loaded): Approximately 50,000 lbs
    • Rear Axle Load (loaded): Approximately 22,000 lbs
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
2018 Linde H80
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
CONTACT
STK#:
A4042
MAKE:
Linde
MODEL:
H80
MAST TYPE:
Two Stage
MAST - LOWERED:
137 in
MAST - RAISED:
177 in
FUEL:
Diesel
SIDESHIFTER:
YES
CAPACITY:
16000 lbs
PRICE
CALL FOR PRICE
2018 LINDE FORKLIFT DIESEL PNEUMATIC
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
2002 Linde H70D-02
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
P5638
MAKE:
Linde
MODEL:
H70D-02
MAST TYPE:
Two Stage
MAST - LOWERED:
131 in
MAST - RAISED:
177 in
FUEL:
Diesel
SIDESHIFTER:
YES
CAPACITY:
15000 lbs
PRICE
CALL FOR PRICE
2002 LINDE FORKLIFT DIESEL PNEUMATIC
  • General Information
    • Model Number: H70D-02
    • Manufacturer: Linde
    • Type: Forklift
    • Fuel Type: Diesel
  • Dimensions
    • Length to Fork Face: 134 inches
    • Overall Width: 60 inches
    • Overall Height (cab): 110 inches
    • Wheelbase: 85 inches
    • Ground Clearance: 9 inches
  • Weights
    • Service Weight: 22,000 lbs
    • Axle Load (front, without load): 11,000 lbs
    • Axle Load (rear, without load): 11,000 lbs
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 8.25-15
    • Rear Tire Size: 8.25-15
  • Performance
    • Load Capacity: 15,500 lbs
    • Travel Speed (laden): 20 mph
    • Travel Speed (unladen): 22 mph
    • Lifting Speed (laden): 79 feet/min
    • Lifting Speed (unladen): 98 feet/min
  • Engine
    • Engine Manufacturer: Deutz
    • Engine Model: TCD 3.6 L4
    • Engine Power: 101 HP
    • Number of Cylinders: 4
    • Displacement: 220 cubic inches
  • Hydraulics
    • Operating Pressure for Attachments: 3,335 psi
    • Hydraulic Tank Capacity: 15 gallons
  • Other Specifications
    • Steering: Hydrostatic
    • Brake System: Hydraulic
    • Fuel Tank Capacity: 30 gallons
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
2015 Nissan PF60LP
Prolift Equipment Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
A3521
MAKE:
Nissan
MODEL:
PF60LP
MAST TYPE:
Three Stage
MAST - LOWERED:
85 in
MAST - RAISED:
188 in
FUEL:
LP Gas
HOURS:
7210 Hrs
SIDESHIFTER:
YES
CAPACITY:
6000 lbs
PRICE
CALL FOR PRICE
NEWLY PAINTED, NISSAN, 6000LBS
  • General Information
    • Model Number: PF60LP
    • Manufacturer: Nissan
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Engine and Power
    • Fuel Type: Liquid Propane (LP)
    • Engine Type: Internal Combustion Engine
    • Horsepower: Approximately 70 HP
  • Dimensions and Weight
    • Overall Length: Approximately 144 inches
    • Overall Width: Approximately 48 inches
    • Overall Height: Approximately 85 inches
    • Wheelbase: Approximately 80 inches
    • Weight: Approximately 10,000 lbs
  • Performance
    • Load Capacity: 6000 lbs
    • Travel Speed: Approximately 13 mph
    • Lifting Speed: Approximately 98 feet per minute
  • Tires and Wheels
    • Tire Type: Pneumatic
    • Front Tires: 6.50-10
    • Rear Tires: 5.00-8
  • Brakes and Steering
    • Braking System: Hydraulic
    • Steering Type: Power Steering
  • Fork Specifications
    • Fork Length: Varies
    • Fork Width: Standard
  • Operator Features
    • Seating: Sit Down
    • Operator Comfort: Adjustable Seat, Armrest, Ergonomic Controls
    • Instrumentation: Full Set of Gauges and Indicators
Prolift Equipment Inc.
Edgar Labastida
1616 Tantor Rd
Dallas, TX 75229
Get Quote
Get Flyer
2024 Big Joe LXE40-189
Dade Lift
 
New
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
NI LXE40-189
MAKE:
Big Joe
MODEL:
LXE40-189
MAST TYPE:
Three Stage
MAST - LOWERED:
83 in
MAST - RAISED:
189 in
FUEL:
Electric
HOURS:
1 Hrs
SIDESHIFTER:
YES
CAPACITY:
4000 lbs
PRICE
$30,126 USD
NEW BIG JOE LITHIUM-ION TECHNOLOGY FORKLIFT 4,000 LB.
  • General Specifications
    • Model Number: LXE40-189
    • Manufacturer: Big Joe
    • Type: Forklift
    • Subtype: Electric 4 Wheel Sit Down
    • Fuel Type: Electric
  • Dimensions
    • Overall Length: 135 inches
    • Overall Width: 43 inches
    • Overall Height: 83 inches
    • Wheelbase: 60 inches
    • Ground Clearance: 3.5 inches
  • Weight
    • Service Weight: 8,800 pounds
  • Performance
    • Load Capacity: 9,000 pounds
    • Travel Speed: 11 mph
    • Turning Radius: 83 inches
    • Gradeability: 20%
  • Fork Specifications
    • Fork Length: Varies
    • Fork Width: 4 inches
    • Fork Thickness: 2 inches
  • Battery and Power
    • Battery Voltage: 80V
    • Battery Capacity: 750 Ah
    • Drive Motor: 25 kW
    • Hydraulic Motor: 20 kW
  • Wheels and Tires
    • Front Tire Size: 18 x 7 inches
    • Rear Tire Size: 16 x 6 inches
    • Tire Type: Pneumatic
Miami Dade
Melissa Machin
12612 NW S. River Drive
Miami, FL 33178
Get Quote
Get Flyer
Finance at $/mo
2024 Big Joe LXE50-189
Dade Lift
 
New
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
NI LXE50-189
MAKE:
Big Joe
MODEL:
LXE50-189
MAST TYPE:
Three Stage
MAST - LOWERED:
83 in
MAST - RAISED:
189 in
FUEL:
Electric
HOURS:
1 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
$46,800 USD
NEW BIG JOE LITHIUM-ION TECHNOLOGY FORKLIFT 5,000 LB.
  • Model Number: LXE50-189
  • Manufacturer: Big Joe
  • Type: Forklift
  • Subtype: Electric 4 Wheel Sit Down
  • Fuel Type: Electric
  • Dimensions:
    • Overall Length: Approx. 9.62 ft
    • Overall Width: Approx. 4 ft
    • Height to Top Overhead Guard: Approx. 7.5 ft
    • Wheelbase: Approx. 4.9 ft
  • Weight:
    • Service Weight: Approx. 9,500 lbs
  • Performance:
    • Load Capacity: 5,000 lbs
    • Travel Speed (laden/unladen): Approx. 10/11 mph
    • Lift Speed (laden/unladen): Approx. 85/115 ft/min
  • Tire Type:
    • Front: Cushion Tires
    • Rear: Cushion Tires
  • Power Train:
    • Drive Motor: 36V AC
    • Hydraulic Motor: 10 kW
  • Brakes:
    • Service Brake: Hydraulic
    • Parking Brake: Manual
  • Forks:
    • Fork Length: Varies
Dade Lift
Eddy Valdes
12612 NW South River Dr.
Medley, FL 33178
Get Quote
Get Flyer
Finance at $/mo
2025 Big Joe LXE40-189
Forklift Consulting LLC
 
New
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
NI LXE40-189
MAKE:
Big Joe
MODEL:
LXE40-189
MAST TYPE:
Three Stage
MAST - LOWERED:
83 in
MAST - RAISED:
189 in
FUEL:
Electric
HOURS:
1 Hrs
SIDESHIFTER:
YES
CAPACITY:
4000 lbs
PRICE
$30,126 USD
Video: https://vimeo.com/500220192
  • General Specifications
    • Model Number: LXE40-189
    • Manufacturer: Big Joe
    • Type: Forklift
    • Subtype: Electric 4 Wheel Sit Down
    • Fuel Type: Electric
  • Dimensions
    • Overall Length: 135 inches
    • Overall Width: 43 inches
    • Overall Height: 83 inches
    • Wheelbase: 60 inches
    • Ground Clearance: 3.5 inches
  • Weight
    • Service Weight: 8,800 pounds
  • Performance
    • Load Capacity: 9,000 pounds
    • Travel Speed: 11 mph
    • Turning Radius: 83 inches
    • Gradeability: 20%
  • Fork Specifications
    • Fork Length: Varies
    • Fork Width: 4 inches
    • Fork Thickness: 2 inches
  • Battery and Power
    • Battery Voltage: 80V
    • Battery Capacity: 750 Ah
    • Drive Motor: 25 kW
    • Hydraulic Motor: 20 kW
  • Wheels and Tires
    • Front Tire Size: 18 x 7 inches
    • Rear Tire Size: 16 x 6 inches
    • Tire Type: Pneumatic
Forklift Consulting LLC
Ed Valdes
6551 Lake Como Terrace
Miami Lakes, FL 33014
Get Quote
Get Flyer
Finance at $/mo
2025 Big Joe LXE50-189
Forklift Consulting LLC
 
New
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
NI LXE50-189
MAKE:
Big Joe
MODEL:
LXE50-189
MAST TYPE:
Three Stage
MAST - LOWERED:
83 in
MAST - RAISED:
189 in
FUEL:
Electric
HOURS:
1 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
$46,800 USD
Video: https://vimeo.com/848416558
  • Model Number: LXE50-189
  • Manufacturer: Big Joe
  • Type: Forklift
  • Subtype: Electric 4 Wheel Sit Down
  • Fuel Type: Electric
  • Dimensions:
    • Overall Length: Approx. 9.62 ft
    • Overall Width: Approx. 4 ft
    • Height to Top Overhead Guard: Approx. 7.5 ft
    • Wheelbase: Approx. 4.9 ft
  • Weight:
    • Service Weight: Approx. 9,500 lbs
  • Performance:
    • Load Capacity: 5,000 lbs
    • Travel Speed (laden/unladen): Approx. 10/11 mph
    • Lift Speed (laden/unladen): Approx. 85/115 ft/min
  • Tire Type:
    • Front: Cushion Tires
    • Rear: Cushion Tires
  • Power Train:
    • Drive Motor: 36V AC
    • Hydraulic Motor: 10 kW
  • Brakes:
    • Service Brake: Hydraulic
    • Parking Brake: Manual
  • Forks:
    • Fork Length: Varies
Forklift Consulting LLC
Ed Valdes
6551 Lake Como Terrace
Miami Lakes, FL 33014
Get Quote
Get Flyer
Finance at $/mo
2009 Raymond RSS40
World Equipment Services
 
Buy or Rent
DETAILS
DESCRIPTION
SPECS
RENTAL
CONTACT
STK#:
3146
MAKE:
Raymond
MODEL:
RSS40
MAST TYPE:
Three Stage
MAST - LOWERED:
83 in
MAST - RAISED:
138 in
FUEL:
Electric
HOURS:
2995 Hrs
SIDESHIFTER:
YES
CAPACITY:
4000 lbs
PRICE
$6,950 USD
Low Hour 2009 Raymond Walkie Stacker
  • Model Information
    • Model Number: RSS40
    • Manufacturer: Raymond
    • Type: Forklift
  • Engine Specifications
    • Power Source: Electric
    • Voltage: 36V / 48V
  • Performance
    • Load Capacity: 4,000 lbs
    • Travel Speed: Up to 6.2 mph
    • Lift Speed: Approximately 59 ft/min
    • Lowering Speed: Approximately 98 ft/min
  • Dimensions
    • Overall Length: Varies
    • Overall Width: 42 inches
    • Overall Height: 94 inches (top of overhead guard)
    • Turning Radius: 61 inches
  • Tires
    • Tire Type: Cushion
    • Front Tire Size: 16 x 5 inches
    • Rear Tire Size: 13 x 5 inches
  • Operator Features
    • Steering: Integrated steering system
    • Control Handle: Multi-function control handle
    • Operator Compartment: Ergonomically designed with adjustable seat
  • Safety Features
    • System of Active Stability™ (SAS)
    • Emergency Shut-Off
    • Warning Lights and Alarms
  • Other Features
    • Battery Compartment Dimensions: 38 inches x 21 inches x 31 inches
    • Charger Requirement: 36V / 48V industrial charger
    • Environmental Protection: Rated for both indoor and outdoor use
MONTHLY RENTAL
$749 USD
WEEKLY RENTAL
$349 USD
DAILY RENTAL
$149 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
World Equipment Services
Brandon
800 S. Wineville Ave.
Ontario, CA 91761
Get Quote
Get Flyer
Finance at $/mo
Listings above this line match your search request, listings below may not match but are similar and may be used as an alternative.
2022 Heli CPYD25C
GAF Equipment Inc. - Hialeah
 
New
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
New Immediate Delivery
MAKE:
Heli
MODEL:
CPYD25C
MAST TYPE:
Three Stage
MAST - LOWERED:
83 in
MAST - RAISED:
189 in
FUEL:
LP Gas
HOURS:
1 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
$1 USD
New Heli CPYD25C Available In stock for immediate Delivery
  • General Specifications
    • Model Number: CPYD25C
    • Manufacturer: Heli
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type Used: LP Gas
  • Dimensions
    • Overall Length (without forks): Approximately 8.1 ft
    • Overall Width: Approximately 3.5 ft
    • Overall Height (overhead guard): Approximately 7 ft
    • Wheelbase: Approximately 5.2 ft
    • Ground Clearance: Approximately 4.1 inches
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed (laden/unladen): Approximately 11.2 mph
    • Lifting Speed (laden/unladen): Approximately 98 feet/min
    • Lowering Speed (laden/unladen): Approximately 98 feet/min
  • Powertrain
    • Engine Type: Internal Combustion Engine
    • Cylinder Count: 4
    • Transmission: Powershift
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: Standard Pneumatic
    • Rear Tire Size: Standard Pneumatic
  • Additional Features
    • Operator Compartment: Sit-Down
    • Steering: Power Steering
    • Brakes: Hydraulic
GAF Equipment Inc. - Hialeah
Gary Foster
8085 West 26th Court
Hialeah, FL 33016
Get Quote
Get Flyer
Finance at $/mo
2011 Yale ERC050VGN36TE083
Direct Forklift Equipment
 
Used
DETAILS
SPECS
CONTACT
STK#:
YT5148J-DEL
MAKE:
Yale
MODEL:
ERC050VGN36TE083
MAST TYPE:
Three Stage
MAST - LOWERED:
81.5 in
MAST - RAISED:
189 in
FUEL:
Electric
HOURS:
7437 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
CALL FOR PRICE
  • General Information
    • Model Number: ERC050VGN36TE083
    • Manufacturer: Yale
    • Type: Forklift
    • Subtype: Electric 4 Wheel Sit Down
    • Fuel Type: Electric
  • Dimensions
    • Overall Length: Approximately 124 inches (including forks)
    • Overall Width: Approximately 43 inches
    • Overall Height (to top of overhead guard): Approximately 87 inches
    • Wheelbase: Approximately 59 inches
    • Ground Clearance: Approximately 4 inches
  • Weight
    • Base Weight: Approximately 9,500 lbs without load
  • Performance
    • Load Capacity: 5,000 lbs
    • Tilt Angles: 5 degrees forward, 5 degrees backward
    • Travel Speed: Up to 11 mph without load
    • Turn Radius: Approximately 85 inches
  • Tires
    • Tire Type: Cushion
    • Front Tire Size: 21x7x15
    • Rear Tire Size: 16x5x10.5
  • Power
    • Battery Voltage: 36V
  • Forks
    • Length: Varies
    • Width: Approximately 4 inches
    • Thickness: Approximately 2 inches
Direct Forklift Equipment
Carl Stitzel
7885 Southern Blvd
Boardman, OH 44512
Get Quote
Get Flyer
2015 Toyota 8FGCU25
Chicago Forklift, LLC
 
Buy or Rent
DETAILS
DESCRIPTION
SPECS
CONTACT
WARRANTY
MAKE:
Toyota
MODEL:
8FGCU25
MAST TYPE:
Three Stage
MAST - LOWERED:
83 in
MAST - RAISED:
189 in
FUEL:
LP Gas
HOURS:
6030 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
$22,500 USD
Nice 5K LP Toyota Available For Immediate Delivery!!
  • Manufacturer: Toyota
  • Model Number: 8FGCU25
  • General Specifications:
    • Power Type: LPG (Liquid Petroleum Gas)
    • Operator Position: Sit-down
    • Tire Type: Cushion
    • Number of Wheels: 4
  • Dimensions:
    • Length to Face of Forks: 8.17 ft
    • Overall Width (Without Load): 3.5 ft
    • Height to Top of Overhead Guard: 7 ft
    • Turning Radius: 80.5 in
    • Minimum Outside Turning Radius: 5.5 ft
    • Wheelbase: 5.08 ft
  • Performance:
    • Rated Load Capacity: 5,000 lbs
    • Load Center: 24 in
    • Travel Speed (Loaded): 11.2 mph
    • Travel Speed (Unloaded): 11.5 mph
    • Lifting Speed (Loaded): 118 ft/min
    • Lifting Speed (Unloaded): 131 ft/min
    • Lowering Speed (Loaded): 98 ft/min
    • Lowering Speed (Unloaded): 98 ft/min
  • Engine Specifications:
    • Engine Model: Toyota 4Y
    • Engine Type: 4-cylinder, water-cooled
    • Displacement: 142 in³
    • Rated Power: 51 hp @ 2,400 RPM
    • Torque: 118.6 lbf·ft @ 1,600 RPM
  • Weights:
    • Service Weight: 8,750 lbs
    • Axle Loading Front: 12,284 lbs (With Load)
    • Axle Loading Rear: 1,466 lbs (With Load)
  • Wheel Specifications:
    • Front Tires: 21x7x15
    • Rear Tires: 16x5x10 ½
    • Tread (Front/Rear): 36/36 in
  • Transmission:
    • Transmission Type: Powershift
    • Number of Speeds (Forward/Reverse): 1/1
  • Brakes:
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical, hand operated
Chicago Forklift, LLC
John Major
1127 Dickens Dr.
Oconomowoc, WI 60056
SALES - USED EQUIPMENT. Purchaser understands that the Goods described herein have been used by persons other than Seller. Purchaser is warned and acknowledges that such Goods may bear or contain hazardous chemicals or other hazardous materials which may be or may become, by chemical reaction or otherwise, directly or indirectly hazardous to life, to health, or to property (by reason of toxicity, flammability, explosiveness or for other similar or different reasons during use, handling, cleaning, reconditioning, disposal or at any other time after the article leaves the possession and control of Seller). Purchaser does hereby discharge Seller from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of Seller to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning.
Get Quote
Get Flyer
Finance at $/mo
2023 20BRP-9
Trupar America Inc.
 
Used
DETAILS
CONTACT
FINANCE
STK#:
H0214
MODEL:
20BRP-9
MAST TYPE:
Two Stage
MAST - LOWERED:
108 in
MAST - RAISED:
240 in
HOURS:
86 Hrs
CAPACITY:
4000 lbs
PRICE
$26,900 USD
Trupar America Inc.
Jay Handra
160 Wilson Rd
Bentleyville, PA 15314

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $/mo
Enersys SSC-12-550Z
Direct Forklift Equipment
 
Used
DETAILS
SPECS
CONTACT
STK#:
ERS3450-DEL
MAKE:
Enersys
MODEL:
SSC-12-550Z
VOLTAGE:
24 volts
PHASE:
Single Phase
AH CAPACITY:
550 AHC
PRICE
CALL FOR PRICE
  • Model: SSC-12-550Z
  • Manufacturer: Enersys
  • Type: Charger
Electrical Specifications
  • Input Voltage: 120 VAC
  • Input Frequency: 60 Hz
  • Input Current: 15 A
  • Output Voltage: 12 VDC
  • Output Current: 55 A
  • Phases: Single Phase
Battery Compatibility
  • Battery Type: Lead Acid, AGM, Gel
  • Number of Cells: 6 cells
  • Supported Battery Capacity: Up to 550 Ah
Environmental Specifications
  • Operating Temperature Range: 32°F to 104°F
  • Storage Temperature Range: -4°F to 140°F
Physical Characteristics
  • Dimensions: 24 in x 13 in x 8 in
  • Weight: 34 lbs
Features
  • Automatic Equalize Function
  • Float Charging Mode
  • Short Circuit Protection
  • Overload Protection
  • Reverse Polarity Protection
  • Digital Display
  • LED Status Indicators
Direct Forklift Equipment
Carl Stitzel
7885 Southern Blvd
Boardman, OH 44512
Get Quote
Get Flyer
UN9769-DEL
Direct Forklift Equipment
 
Used
DETAILS
CONTACT
MODEL:
UN9769-DEL
VOLTAGE:
24 volts
PHASE:
Single Phase
AH CAPACITY:
300 AHC
PRICE
CALL FOR PRICE
Direct Forklift Equipment
Carl Stitzel
7885 Southern Blvd
Boardman, OH 44512
Get Quote
Get Flyer
2018 Tailift ZFBT18
KMC Forklift Service Inc.
 
Buy or Rent
DETAILS
DESCRIPTION
SPECS
RENTAL
CONTACT
WARRANTY
STK#:
R50
MAKE:
Tailift
MODEL:
ZFBT18
MAST TYPE:
Three Stage
MAST - LOWERED:
83 in
MAST - RAISED:
189 in
FUEL:
Electric
HOURS:
351 Hrs
SIDESHIFTER:
YES
CAPACITY:
3500 lbs
PRICE
CALL FOR PRICE
Local Delivery included on Monthly Rental
  • General Specifications
    • Manufacturer: Tailift
    • Model Number: ZFBT18
    • Type: Forklift
  • Engine and Power
    • Power Type: Electric
    • Battery Capacity: Varies depending on configuration
  • Dimensions
    • Overall Length: Approximately 132.3 inches
    • Overall Width: Approximately 40.2 inches
    • Overall Height: Approximately 85.4 inches
    • Wheelbase: Approximately 59.1 inches
    • Ground Clearance: Approximately 4.3 inches
  • Load Capacity
    • Maximum Load Capacity: 3,968 lbs
  • Performance
    • Travel Speed with Load: Approximately 8 mph
    • Travel Speed without Load: Approximately 9 mph
    • Lifting Speed with Load: Approximately 43 ft/min
    • Lifting Speed without Load: Approximately 63 ft/min
    • Gradeability with Load: Approximately 15%
  • Brakes
    • Brake System: Hydraulic
  • Tires
    • Tire Type: Pneumatic
  • Operating Weight
    • Weight: Approximately 6,945 lbs
  • Forks
    • Fork Length: Varies
MONTHLY RENTAL
$1,560 USD
WEEKLY RENTAL
$510 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
KMC Forklift Service Inc.
Kevin Quinn
7941 Wickson Ridge Dr.
Bryan, TX 77808
Subject to prior rental and availability. Pricing subject to change
Get Quote
Get Flyer
2001 Hyster N40XMR
KMC Forklift Service Inc.
 
Buy or Rent
DETAILS
DESCRIPTION
SPECS
RENTAL
CONTACT
WARRANTY
STK#:
R30
MAKE:
Hyster
MODEL:
N40XMR
MAST TYPE:
Three Stage
FUEL:
Electric
HOURS:
7287.3 Hrs
SIDESHIFTER:
YES
CAPACITY:
4000 lbs
PRICE
CALL FOR PRICE
Local Delivery Included in Monthly Rentals
  • Model: N40XMR
  • Manufacturer: Hyster
  • Type: Forklift
  • Subtype: Electric Narrow Aisle Single Reach
  • Fuel Type: Electric
  • Capacity:
    • Load Capacity: 4,000 lbs
  • Dimensions:
    • Overall Length: Approximately 8.1 ft
    • Overall Width: 42 inches
    • Height to Top of Overhead Guard: Approximately 7 ft
    • Wheelbase: 5.28 ft
  • Power:
    • Battery Voltage: 24V
  • Performance:
    • Travel Speed: Up to 6.5 mph
    • Lift Speed: 50 ft/min
    • Lowering Speed: 70 ft/min
  • Weight:
    • Truck Weight without Battery: Approximately 6,500 lbs
  • Forks:
    • Fork Length: Varies
    • Fork Width: 4 inches
MONTHLY RENTAL
$1,570 USD
WEEKLY RENTAL
$490 USD
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
KMC Forklift Service Inc.
Kevin Quinn
7941 Wickson Ridge Dr.
Bryan, TX 77808
Subject to prior rental and availability. Pricing subject to change
Get Quote
Get Flyer
Hangcha MANUAL JACK
Florida Forklift Inc.
 
New
DETAILS
DESCRIPTION
SPECS
CONTACT
WARRANTY
MAKE:
Hangcha
MODEL:
MANUAL JACK
PRICE
CALL FOR PRICE
LOCAL DELIVERY AVAILABLE, CALL FOR DETAILS.
  • General Specifications
    • Model Number: MANUAL JACK
    • Manufacturer: Hangcha
    • Subtype: Pallet Jacks - Manual - New & Used
  • Capacity
    • Load Capacity: 5,500 lbs
  • Dimensions
    • Fork Width: 6.3 inches per fork
    • Overall Fork Width: Approximately 27 inches
    • Fork Length: Varies
    • Lowered Fork Height: 3 inches
    • Raised Fork Height: No max lift height specified
  • Performance
    • Steering Wheel Size: 7 inches in diameter
    • Load Roller Size: 3 inches in diameter
  • Build
    • Material: High-tensile steel
    • Finish: Powder-coated paint to prevent corrosion
  • Features
    • Pump: Quick-lift hydraulic pump
    • Handle: Ergonomic handle with comfort grip
    • Wheels: Polyurethane wheels for smooth operation
Florida Forklift Inc.
Florida Forklift
3221 N. 40th Street
Tampa, FL 33605
DUKE EQUIPMENT DBA FLORIDA FORKLIFT, INC. TERMS AND CONDITIONS ACCEPTANCE. By its officers signature Duke Equipment DBA Florida Forklift, Inc. accepts Buyer’s order for equipment as described on the face hereof, but such acceptance is conditional upon acceptance by of the terms set forth herein. Seller should not be bound by any terms of Buyer’s other purchase order(s) which provide conditions additional to or different from the terms hereof. SHIPMENT. Unless otherwise specifically agreed, all prices are for the material packed for domestic shipment and for delivery F.O.B. factory of point of shipment. Shipping dates are approximant and based on prompt receipt of all necessary information. All risk of loss shall be upon the Buyer from point of shipment. Buyer shall pay all transportation and delivery charges to final destination. PAYMENT. Partial shipment may be made and payments thereof shall become due in accordance with the terms hereof. Finance charges are subject to terms in effect at the time of delivery of equipment herein described. The terms of the sale herein are subject to credit approval and Seller may at any time prior to delivery modify terms of the payment originally specified to assure prompt payment for the equipment ordered. TAXES. Buyer is liable for the full amount of taxes applicable to, or as a result of, this transaction. Buyer shall pay the amount of all such taxes at any time requested by Seller as if originally added to price. SECURITY INTEREST AND DEFAULT. Seller shall retain a security interest in the equipment delivered hereunder until the total selling price, including taxes, delivery and other charges, is paid in full by Buyer. WARRANTY. The NEW equipment sold by Duke Equipment DBA Florida Forklift, Inc. is usually covered by the warranties of the original equipment manufacturers. When those warranties exist their terms and conditions are passed on to the Buyer of the new equipment and supported by Duke Equipment DBA Florida Forklift, Inc. Details of the original equipment manufacturers warranties are covered on separate documents and are available to Buyer upon request. The USED equipment sold by Duke Equipment DBA Florida Forklift, Inc. may or may not be covered by a warranty. If the warranty is provided it will be noted on the face of this order. If no stipulation regarding warranty is noted on the face of this order, no warranty, express or implied exist. In no event is any expressed or implied warranty of merchantability or fitness for a particular purpose in existence. DELAYS. Seller shall not be liable for loss or damage due to delay in delivery or manufacture, resulting from any cause beyond Seller’s reason-able control. Any delays resulting from any such cause shall constitute a waiver of all claims and damages. CANCELLATION. Buyer may cancel its order, reduce quantities, revise specifications or extend schedules only by mutual agreement with Seller as to reasonable and proper cancellation charges which shall take into account expenses already incurred and commitments made by Seller, and Buyer shall indemnify Seller against any loss resulting thereof. ENTIRE AGREEMENT AND APPLICABLE LAW. The rights and obligations of Seller and Buyer shall be governed by the laws of the State of Florida. The provisions hereof are intended by Buyer and Seller as a final expression of their agreement and are intended also as a complete and exclusive statement of all the terms applicable to Buyer’s order. No waiver, modification, or addition to any of the terms hereof shall be binding on Seller unless made in writing. CUSTOMER INITIALS______ Date:
Get Quote
Get Flyer
Unicarriers MANUAL JACK
Florida Forklift Inc.
 
New
DETAILS
DESCRIPTION
SPECS
CONTACT
WARRANTY
MAKE:
Unicarriers
MODEL:
MANUAL JACK
PRICE
$335 USD
LOCAL DELIVERY AVAILABLE, CALL FOR DETAILS
  • Model Details
    • Model Number: MANUAL JACK
    • Manufacturer: Unicarriers
    • Subtype: Pallet Jacks - Manual - New & Used
  • Dimensions
    • Overall Width: Approximately 27 inches
    • Fork Length: Varies
    • Overall Length: Varies
    • Overall Height: 48 inches
  • Performance
    • Load Capacity: Up to 5,500 lbs
    • Power Source: Manual
    • Wheel Material: Polyurethane/Steel
  • Features
    • Ergonomic Handle Design
    • Durable Frame Construction
    • Low Maintenance
    • Effortless Manoeuverability
  • Wheels
    • Steering Wheel Diameter: 7 inches
    • Load Wheel Diameter: 3 inches
Florida Forklift Inc.
Florida Forklift
3221 N. 40th Street
Tampa, FL 33605
DUKE EQUIPMENT DBA FLORIDA FORKLIFT, INC. TERMS AND CONDITIONS ACCEPTANCE. By its officers signature Duke Equipment DBA Florida Forklift, Inc. accepts Buyer’s order for equipment as described on the face hereof, but such acceptance is conditional upon acceptance by of the terms set forth herein. Seller should not be bound by any terms of Buyer’s other purchase order(s) which provide conditions additional to or different from the terms hereof. SHIPMENT. Unless otherwise specifically agreed, all prices are for the material packed for domestic shipment and for delivery F.O.B. factory of point of shipment. Shipping dates are approximant and based on prompt receipt of all necessary information. All risk of loss shall be upon the Buyer from point of shipment. Buyer shall pay all transportation and delivery charges to final destination. PAYMENT. Partial shipment may be made and payments thereof shall become due in accordance with the terms hereof. Finance charges are subject to terms in effect at the time of delivery of equipment herein described. The terms of the sale herein are subject to credit approval and Seller may at any time prior to delivery modify terms of the payment originally specified to assure prompt payment for the equipment ordered. TAXES. Buyer is liable for the full amount of taxes applicable to, or as a result of, this transaction. Buyer shall pay the amount of all such taxes at any time requested by Seller as if originally added to price. SECURITY INTEREST AND DEFAULT. Seller shall retain a security interest in the equipment delivered hereunder until the total selling price, including taxes, delivery and other charges, is paid in full by Buyer. WARRANTY. The NEW equipment sold by Duke Equipment DBA Florida Forklift, Inc. is usually covered by the warranties of the original equipment manufacturers. When those warranties exist their terms and conditions are passed on to the Buyer of the new equipment and supported by Duke Equipment DBA Florida Forklift, Inc. Details of the original equipment manufacturers warranties are covered on separate documents and are available to Buyer upon request. The USED equipment sold by Duke Equipment DBA Florida Forklift, Inc. may or may not be covered by a warranty. If the warranty is provided it will be noted on the face of this order. If no stipulation regarding warranty is noted on the face of this order, no warranty, express or implied exist. In no event is any expressed or implied warranty of merchantability or fitness for a particular purpose in existence. DELAYS. Seller shall not be liable for loss or damage due to delay in delivery or manufacture, resulting from any cause beyond Seller’s reason-able control. Any delays resulting from any such cause shall constitute a waiver of all claims and damages. CANCELLATION. Buyer may cancel its order, reduce quantities, revise specifications or extend schedules only by mutual agreement with Seller as to reasonable and proper cancellation charges which shall take into account expenses already incurred and commitments made by Seller, and Buyer shall indemnify Seller against any loss resulting thereof. ENTIRE AGREEMENT AND APPLICABLE LAW. The rights and obligations of Seller and Buyer shall be governed by the laws of the State of Florida. The provisions hereof are intended by Buyer and Seller as a final expression of their agreement and are intended also as a complete and exclusive statement of all the terms applicable to Buyer’s order. No waiver, modification, or addition to any of the terms hereof shall be binding on Seller unless made in writing. CUSTOMER INITIALS______ Date:
Get Quote
Get Flyer
Finance at $/mo
2015 Yale ESC035ADN36TQ090
Direct Forklift Equipment
 
Used
DETAILS
SPECS
CONTACT
STK#:
YT1754N-DEL
MAKE:
Yale
MODEL:
ESC035ADN36TQ090
MAST TYPE:
Quad Mast
MAST - LOWERED:
89.5 in
MAST - RAISED:
259 in
FUEL:
Electric
HOURS:
10458 Hrs
SIDESHIFTER:
YES
CAPACITY:
3500 lbs
PRICE
CALL FOR PRICE
  • Model Number: ESC035ADN36TQ090
  • Manufacturer: Yale
  • Type: Forklift
  • Fuel Type Used: Electric
  • General Specifications
    • Operator Type: Standing
    • Tire Type: Cushion
    • Load Capacity: Approximately 3,500 lbs
    • Voltage: 36V
    • Steering: Electronic Power Steering
    • Braking System: Regenerative and Electro-Hydraulic
  • Dimensions
    • Overall Length: Approximately 87 inches
    • Overall Width: Approximately 41 inches
    • Overall Height (to top of overhead guard): Approximately 85 inches
    • Turning Radius: Approximately 58 inches
    • Wheelbase: Approximately 50 inches
    • Ground Clearance: Approximately 3 inches
  • Performance
    • Travel Speed (loaded): Approximately 6.5 mph
    • Lift Speed (empty): Approximately 83 feet per minute
    • Lowering Speed (empty): Approximately 95 feet per minute
    • Gradeability (loaded): Approximately 10%
  • Fork Specifications
    • Fork Length: Varies
    • Fork Width: Approximately 4 inches
    • Fork Thickness: Approximately 1.5 inches
  • Electrical Systems
    • Battery Type: Lead-Acid
    • Battery Capacity: Varies depending on model
    • Charger Type: External charger
  • Safety Features
    • Automatic speed reduction in turns
    • Operator presence detection system
    • Seatbelt and overhead guard
    • Alarm systems for reversing
Direct Forklift Equipment
Carl Stitzel
7885 Southern Blvd
Boardman, OH 44512
Get Quote
Get Flyer
2013 Mitsubishi FG25N
Forklift Pro, Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
26861
MAKE:
Mitsubishi
MODEL:
FG25N
MAST TYPE:
Three Stage
MAST - RAISED:
188 in
FUEL:
LP Gas
HOURS:
7969 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
$12,950 USD
Delivery and financing available - Come see it today!
  • General Specifications
    • Model: FG25N
    • Manufacturer: Mitsubishi
    • Type: Internal Combustion Forklift
    • Power: LPG (Liquid Petroleum Gas)
  • Dimensions
    • Overall Length: Approx. 8.7 ft (without forks)
    • Overall Width: Approx. 3.5 ft
    • Overall Height: Approx. 7 ft (Cab Height)
    • Wheelbase: Approx. 5.3 ft
    • Ground Clearance: Approx. 4 in
  • Performance
    • Load Capacity: 5,000 lbs
    • Tilt Angle: 6 degrees forward / 12 degrees backward
  • Engine
    • Engine Model: Mitsubishi 4G63
    • Engine Power: Approx. 60 hp
    • Number of Cylinders: 4
  • Drive and Transmission
    • Drive: 2-Wheel Drive
    • Transmission: Powershift (automatic)
  • Weight
    • Service Weight: Approx. 7,700 lbs
  • Wheels and Tires
    • Tire Type (Front/Rear): Pneumatic
    • Tire Size (Front): 7.00 - 12
    • Tire Size (Rear): 6.00 - 9
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Lever
Forklift Pro, Inc.
Sales Department
9801 Industrial Drive
Pineville, NC 28134
Get Quote
Get Flyer
Finance at $/mo
2018 Hyster S120FTPRS
Forklift Pro, Inc.
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
26891
MAKE:
Hyster
MODEL:
S120FTPRS
MAST TYPE:
Three Stage
MAST - RAISED:
220 in
FUEL:
LP Gas
HOURS:
10205 Hrs
CAPACITY:
12000 lbs
PRICE
$13,950 USD
  • Model: S120FTPRS
  • Manufacturer: Hyster
  • Type: Forklift
  • Capacity
    • Load Capacity: 12,000 lbs
  • Engine
    • Engine Type: Internal Combustion
    • Engine Model: PSI 4.3L V6
  • Powertrain
    • Drive Type: 2WD
    • Transmission: Automatic
  • Dimensions
    • Overall Length: 129 inches
    • Overall Width: 55 inches
    • Overall Height (Overhead Guard): 91 inches
    • Wheelbase: 83 inches
  • Performance
    • Travel Speed (Unloaded): 12 mph
    • Lift Speed (Loaded): 98 ft/min
    • Lowering Speed (Loaded): 98 ft/min
  • Tires
    • Tires Type: Pneumatic, solid pneumatic optional
    • Front Tires: 8.25x15-14PR
    • Rear Tires: 7.00x12-12PR
  • Brakes
    • Service Brakes: Hydraulic
    • Parking Brake: Mechanical, hand lever
  • Fuel
    • Fuel Type: LPG (Liquid Petroleum Gas)
    • Fuel Tank Capacity: Varies based on LPG cylinder used
  • Forks
    • Fork Length: Varies
  • Other Features
    • Operator's compartment designed for comfort
    • Adjustable steering column
    • Integrated dash display
Forklift Pro, Inc.
Sales Department
9801 Industrial Drive
Pineville, NC 28134

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $/mo
2015 Hyster B60ZHD
Forklift Pro, Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
27117
MAKE:
Hyster
MODEL:
B60ZHD
FUEL:
Electric
HOURS:
570 Hrs
PRICE
CALL FOR PRICE
Delivery available, Call or email now for more information.
  • Model Number: B60ZHD
  • Manufacturer: Hyster
  • Subtype: Personnel & Burden Carriers
General Specifications
  • Power Source: Electric
  • Drive Tires: Polyurethane
  • Load Tires: Polyurethane
  • Operator Type: Stand-on / Pedestrian
Dimensions
  • Overall Width: 33.5 inches
  • Overall Length, Standard: Varies
  • Turning Radius: 64.8 inches
  • Wheelbase: 60 inches
Performance
  • Travel Speed (Without Load): Up to 9 mph
  • Travel Speed (With Load): Up to 7.5 mph
  • Load Capacity: 6,000 lbs
  • Drive Motor: 24V
Chassis
  • Service Brake: Electric
  • Parking Brake: Spring Applied, Electromagnetic Release
Forklift Pro, Inc.
Sales Department
9801 Industrial Drive
Pineville, NC 28134
Get Quote
Get Flyer
2015 Hyster B60ZHD
Forklift Pro, Inc.
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
27116
MAKE:
Hyster
MODEL:
B60ZHD
FUEL:
Electric
HOURS:
454 Hrs
CAPACITY:
6000 lbs
PRICE
$2,950 USD
Delivery available, Call or email now for more information.
  • Model Number: B60ZHD
  • Manufacturer: Hyster
  • Subtype: Personnel & Burden Carriers
General Specifications
  • Power Source: Electric
  • Drive Tires: Polyurethane
  • Load Tires: Polyurethane
  • Operator Type: Stand-on / Pedestrian
Dimensions
  • Overall Width: 33.5 inches
  • Overall Length, Standard: Varies
  • Turning Radius: 64.8 inches
  • Wheelbase: 60 inches
Performance
  • Travel Speed (Without Load): Up to 9 mph
  • Travel Speed (With Load): Up to 7.5 mph
  • Load Capacity: 6,000 lbs
  • Drive Motor: 24V
Chassis
  • Service Brake: Electric
  • Parking Brake: Spring Applied, Electromagnetic Release
Forklift Pro, Inc.
Sales Department
9801 Industrial Drive
Pineville, NC 28134
Get Quote
Get Flyer
Finance at $/mo
2018 Hyster H50XT
Forklift Pro, Inc.
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
27164
MAKE:
Hyster
MODEL:
H50XT
MAST TYPE:
Three Stage
MAST - RAISED:
194 in
FUEL:
LP Gas
HOURS:
2800 Hrs
CAPACITY:
5000 lbs
PRICE
$14,950 USD
  • Model Number: H50XT
  • Manufacturer: Hyster
  • General Specifications
    • Type: Forklift
    • Rated Capacity: 5,000 lbs
    • Power Source: Internal combustion engine
  • Dimensions
    • Overall Width: 47.2 inches
    • Overall Length: Varies based on fork length
    • Turning Radius: Roughly 86.6 inches
  • Performance
    • Travel Speed: Approximately 11.2 mph (unloaded)
    • Lift Speed: Around 118 ft/min (unloaded)
    • Gradeability (loaded): Approximately 27%
  • Engine Specifications
    • Engine Manufacturer: Varies with configuration
    • Number of Cylinders: 4
    • Fuel Type: Gasoline, LPG, or Diesel (based on variant)
  • Tires
    • Tire Type: Pneumatic or Cushion (based on variant)
    • Tire Size (Front): 7.00x12
    • Tire Size (Rear): 6.00x9
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Hand-operated mechanical
  • Additional Features
    • Steering: Power-assisted
    • Operator Cabin: Optional with enclosed cab
    • Instrumentation: Includes fuel gauge, hour meter, and warning indicators
Forklift Pro, Inc.
Sales Department
9801 Industrial Drive
Pineville, NC 28134

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $/mo
2018 Yale OS030EF
Riekes Equipment
 
Used
DETAILS
DESCRIPTION
CONTACT
FINANCE
WARRANTY
STK#:
EQ0047848-RSC
MAKE:
Yale
MODEL:
OS030EF
MAST TYPE:
Three Stage
MAST - LOWERED:
89 in
MAST - RAISED:
195 in
FUEL:
Electric
HOURS:
1296 Hrs
SIDESHIFTER:
NO
CAPACITY:
3000 lbs
PRICE
$14,495 USD
PRICED WITH 2023 BATTERY, QUOTE DOES NOT INCLUDE DELIVERY
Riekes Equipment
Used Equipment Team
Locations in, MO, IA, SD, ND &
, NE

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment Terms and Conditions 1. As used herein, Riekes shall mean Riekes Equipment Inc. Customer shall mean the person or business purchasing and Equipment shall mean the goods specified in the Order. 2. Offer of Sale Offers of sale are based on the terms and conditions included in the proposal and those provided below. Unless otherwise stated, offers are available for acceptance for a period of 30 days from the date of the quote. An order by the Customer shall constitute an acceptance of these terms and conditions of sale. 3. Equipment Trade ins Trade values are quoted per the condition of the equipment on the date it was inspected. Changes to the condition may result in reduced trade values and will be adjusted prior to the completion of the transaction. Equipment value is based on current market conditions. 4. Payment Terms Our standard terms are Net 30 days with approved credit. Unless otherwise specified, full payment of the total amount indicated in the Order shall be made on the date of delivery, or if partial delivery, the portion of such payment for the Equipment on the separate dates of delivery. If equipment is leased, the lease documents must be signed prior to order placement and the certificate of acceptance must be signed and dated upon delivery of equipment. Any invoices paid with a credit card are subject to a processing fee. 5. Prices Quoted monthly payments and sale prices are valid for orders placed within 30 days of the date of this quote and for equipment delivering within 120 days of the order. The final monthly payment may vary due to final credit approval. Prices quoted by Riekes are subject to change without notice. 6. Taxes Sales tax is not included in sale price or monthly lease payment. Except for amounts attributable to Riekes, the Customer shall be solely responsible for all federal, state and local taxes, duties, tariffs or other similar levies arising out of or related to the Equipment order in this Agreement. Customer indemnifies and holds Riekes harmless from the payment of any such taxes, plus any penalties, interest or costs. 7. Sale of Equipment and Delivery Unless indicated within this quote, all Equipment is sold Freight F.O.B. Factory. In the event that the equipment is delivered more than 120 days after the order was placed, the monthly payment may be subject to adjustment based on changes in the prevailing interest rates. This will be directed to us by the financial institutions and will be detailed in the lease documentation provided at the time of order placement. Riekes is not responsible for loading and unloading. 8. Availability Customer agrees that all products are subject to availability. The customer also agrees that Riekes Equipment, any agent, representative, employee or subsidiary of does not guarantee delivery lead times. All delivery lead times are controlled by the manufacturer. Should Riekes cancel any part of an order, the sole obligation shall be to return any down payment paid by the Customer. If the Customer is delinquent in the payment of any invoice, or is otherwise in breach of this Agreement, Riekes may at its discretion, withhold shipment (including partial shipments) of any order, and may require Customer to prepay future shipments. Riekes retains the right to suspend performance of any order or require advance payment when, in its opinion, the financial condition of Customer, or other grounds for insecurity warrant such action or it is required by the manufacturer. 9. Warranty and Statement of Quality We strive to provide our customers with products and services which meet and even exceed their expectations. All Used Truck sales are warrantied for 30 days following the sale date unless otherwise stated. Riekes warrants that any equipment provided under this agreement shall conform to the highest industry standards and be free from defects in materials and workmanship. Actual warranties are offered by the manufacturer of the product and the terms vary. Warranties may not apply to defects or damages resulting from: a. Improper use, installation or maintenance b. Unauthorized modifications or alterations c. Force majeure events or acts of third parties 10. Product Returns Products shall not be returned to Riekes without its written consent. All costs of return shall be the responsibility of the Customer and include freight incurred and restocking fees. 11. Applicable Law This Agreement shall be governed by and construed in accordance with the law of the State of Nebraska, without regard to its choice of law provisions. In the event of litigation or other proceedings by Riekes to enforce or defend any term or provision of this Agreement, Customer agrees to pay all costs and expenses sustained by Riekes, including but not limited to, reasonable attorney fees. 12. Force Majeure Neither party shall be responsible for delays or failure in performance of this Agreement (other than failure to pay any amounts due) to the extent that such party was hindered in its performance by any act of God, civil commotion, labor dispute, unavailability or shortages of materials or any other occurrence beyond its reasonable control. 13. Binding Effect This Agreement shall be binding upon each of the parties hereto and each of their respective heirs, administrators, executors, personal representatives and permitted successors and assigns. Except to the extent prohibited by law, no third party shall be the beneficiary to any of the rights or obligations hereunder (including but not limited to, warranty obligations). 14. Riekes Agents Customer acknowledges that no agent, employee or representative of Riekes has any authority to bind Riekes to any affirmation, promise, representation, or warranty concerning any of the products and, unless such affirmation, promise, representation, or warranty is specifically set forth in this Agreement it does not form a basis of this bargain and shall not be enforceable against Riekes. 15. Acknowledgement Customer acknowledges and agrees that this is a non-cancellable transaction. Customer and Riekes Equipment. signatures on all necessary documents have been executed. A Customer signature or purchase order signifies acceptance of the details of this quote along with our terms of sale. Fax or email signatures and POs shall be accepted as original consent.
Get Quote
Get Flyer
Finance at $/mo
2018 Hyster B60ZHD
Riekes Equipment
 
Used
DETAILS
DESCRIPTION
CONTACT
FINANCE
WARRANTY
STK#:
EQ0049862-RSC
MAKE:
Hyster
MODEL:
B60ZHD
MAST TYPE:
Six inch lift (walkie)
MAST - LOWERED:
3.3 in
MAST - RAISED:
9.3 in
FUEL:
Electric
HOURS:
3757 Hrs
SIDESHIFTER:
NO
CAPACITY:
6000 lbs
PRICE
$5,193 USD
PRICED WITH 2020 BATTERY , PRICE DOES NOT INCLUDE DELIVERY
Riekes Equipment
Used Equipment Team
Locations in, MO, IA, SD, ND &
, NE

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment Terms and Conditions 1. As used herein, Riekes shall mean Riekes Equipment Inc. Customer shall mean the person or business purchasing and Equipment shall mean the goods specified in the Order. 2. Offer of Sale Offers of sale are based on the terms and conditions included in the proposal and those provided below. Unless otherwise stated, offers are available for acceptance for a period of 30 days from the date of the quote. An order by the Customer shall constitute an acceptance of these terms and conditions of sale. 3. Equipment Trade ins Trade values are quoted per the condition of the equipment on the date it was inspected. Changes to the condition may result in reduced trade values and will be adjusted prior to the completion of the transaction. Equipment value is based on current market conditions. 4. Payment Terms Our standard terms are Net 30 days with approved credit. Unless otherwise specified, full payment of the total amount indicated in the Order shall be made on the date of delivery, or if partial delivery, the portion of such payment for the Equipment on the separate dates of delivery. If equipment is leased, the lease documents must be signed prior to order placement and the certificate of acceptance must be signed and dated upon delivery of equipment. Any invoices paid with a credit card are subject to a processing fee. 5. Prices Quoted monthly payments and sale prices are valid for orders placed within 30 days of the date of this quote and for equipment delivering within 120 days of the order. The final monthly payment may vary due to final credit approval. Prices quoted by Riekes are subject to change without notice. 6. Taxes Sales tax is not included in sale price or monthly lease payment. Except for amounts attributable to Riekes, the Customer shall be solely responsible for all federal, state and local taxes, duties, tariffs or other similar levies arising out of or related to the Equipment order in this Agreement. Customer indemnifies and holds Riekes harmless from the payment of any such taxes, plus any penalties, interest or costs. 7. Sale of Equipment and Delivery Unless indicated within this quote, all Equipment is sold Freight F.O.B. Factory. In the event that the equipment is delivered more than 120 days after the order was placed, the monthly payment may be subject to adjustment based on changes in the prevailing interest rates. This will be directed to us by the financial institutions and will be detailed in the lease documentation provided at the time of order placement. Riekes is not responsible for loading and unloading. 8. Availability Customer agrees that all products are subject to availability. The customer also agrees that Riekes Equipment, any agent, representative, employee or subsidiary of does not guarantee delivery lead times. All delivery lead times are controlled by the manufacturer. Should Riekes cancel any part of an order, the sole obligation shall be to return any down payment paid by the Customer. If the Customer is delinquent in the payment of any invoice, or is otherwise in breach of this Agreement, Riekes may at its discretion, withhold shipment (including partial shipments) of any order, and may require Customer to prepay future shipments. Riekes retains the right to suspend performance of any order or require advance payment when, in its opinion, the financial condition of Customer, or other grounds for insecurity warrant such action or it is required by the manufacturer. 9. Warranty and Statement of Quality We strive to provide our customers with products and services which meet and even exceed their expectations. All Used Truck sales are warrantied for 30 days following the sale date unless otherwise stated. Riekes warrants that any equipment provided under this agreement shall conform to the highest industry standards and be free from defects in materials and workmanship. Actual warranties are offered by the manufacturer of the product and the terms vary. Warranties may not apply to defects or damages resulting from: a. Improper use, installation or maintenance b. Unauthorized modifications or alterations c. Force majeure events or acts of third parties 10. Product Returns Products shall not be returned to Riekes without its written consent. All costs of return shall be the responsibility of the Customer and include freight incurred and restocking fees. 11. Applicable Law This Agreement shall be governed by and construed in accordance with the law of the State of Nebraska, without regard to its choice of law provisions. In the event of litigation or other proceedings by Riekes to enforce or defend any term or provision of this Agreement, Customer agrees to pay all costs and expenses sustained by Riekes, including but not limited to, reasonable attorney fees. 12. Force Majeure Neither party shall be responsible for delays or failure in performance of this Agreement (other than failure to pay any amounts due) to the extent that such party was hindered in its performance by any act of God, civil commotion, labor dispute, unavailability or shortages of materials or any other occurrence beyond its reasonable control. 13. Binding Effect This Agreement shall be binding upon each of the parties hereto and each of their respective heirs, administrators, executors, personal representatives and permitted successors and assigns. Except to the extent prohibited by law, no third party shall be the beneficiary to any of the rights or obligations hereunder (including but not limited to, warranty obligations). 14. Riekes Agents Customer acknowledges that no agent, employee or representative of Riekes has any authority to bind Riekes to any affirmation, promise, representation, or warranty concerning any of the products and, unless such affirmation, promise, representation, or warranty is specifically set forth in this Agreement it does not form a basis of this bargain and shall not be enforceable against Riekes. 15. Acknowledgement Customer acknowledges and agrees that this is a non-cancellable transaction. Customer and Riekes Equipment. signatures on all necessary documents have been executed. A Customer signature or purchase order signifies acceptance of the details of this quote along with our terms of sale. Fax or email signatures and POs shall be accepted as original consent.
Get Quote
Get Flyer
Finance at $/mo
2015 Yale OS030EF
Riekes Equipment
 
Used
DETAILS
DESCRIPTION
CONTACT
FINANCE
WARRANTY
STK#:
EQ0067736-RSC
MAKE:
Yale
MODEL:
OS030EF
MAST TYPE:
Three Stage
MAST - LOWERED:
95 in
MAST - RAISED:
213 in
FUEL:
Electric
HOURS:
6004 Hrs
SIDESHIFTER:
NO
CAPACITY:
3000 lbs
PRICE
$7,950 USD
PRICED WITH 2015 BATTERY, PRICE DOES NOT INCLUDE DELIVERY
Riekes Equipment
Used Equipment Team
Locations in, MO, IA, SD, ND &
, NE

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment Terms and Conditions 1. As used herein, Riekes shall mean Riekes Equipment Inc. Customer shall mean the person or business purchasing and Equipment shall mean the goods specified in the Order. 2. Offer of Sale Offers of sale are based on the terms and conditions included in the proposal and those provided below. Unless otherwise stated, offers are available for acceptance for a period of 30 days from the date of the quote. An order by the Customer shall constitute an acceptance of these terms and conditions of sale. 3. Equipment Trade ins Trade values are quoted per the condition of the equipment on the date it was inspected. Changes to the condition may result in reduced trade values and will be adjusted prior to the completion of the transaction. Equipment value is based on current market conditions. 4. Payment Terms Our standard terms are Net 30 days with approved credit. Unless otherwise specified, full payment of the total amount indicated in the Order shall be made on the date of delivery, or if partial delivery, the portion of such payment for the Equipment on the separate dates of delivery. If equipment is leased, the lease documents must be signed prior to order placement and the certificate of acceptance must be signed and dated upon delivery of equipment. Any invoices paid with a credit card are subject to a processing fee. 5. Prices Quoted monthly payments and sale prices are valid for orders placed within 30 days of the date of this quote and for equipment delivering within 120 days of the order. The final monthly payment may vary due to final credit approval. Prices quoted by Riekes are subject to change without notice. 6. Taxes Sales tax is not included in sale price or monthly lease payment. Except for amounts attributable to Riekes, the Customer shall be solely responsible for all federal, state and local taxes, duties, tariffs or other similar levies arising out of or related to the Equipment order in this Agreement. Customer indemnifies and holds Riekes harmless from the payment of any such taxes, plus any penalties, interest or costs. 7. Sale of Equipment and Delivery Unless indicated within this quote, all Equipment is sold Freight F.O.B. Factory. In the event that the equipment is delivered more than 120 days after the order was placed, the monthly payment may be subject to adjustment based on changes in the prevailing interest rates. This will be directed to us by the financial institutions and will be detailed in the lease documentation provided at the time of order placement. Riekes is not responsible for loading and unloading. 8. Availability Customer agrees that all products are subject to availability. The customer also agrees that Riekes Equipment, any agent, representative, employee or subsidiary of does not guarantee delivery lead times. All delivery lead times are controlled by the manufacturer. Should Riekes cancel any part of an order, the sole obligation shall be to return any down payment paid by the Customer. If the Customer is delinquent in the payment of any invoice, or is otherwise in breach of this Agreement, Riekes may at its discretion, withhold shipment (including partial shipments) of any order, and may require Customer to prepay future shipments. Riekes retains the right to suspend performance of any order or require advance payment when, in its opinion, the financial condition of Customer, or other grounds for insecurity warrant such action or it is required by the manufacturer. 9. Warranty and Statement of Quality We strive to provide our customers with products and services which meet and even exceed their expectations. All Used Truck sales are warrantied for 30 days following the sale date unless otherwise stated. Riekes warrants that any equipment provided under this agreement shall conform to the highest industry standards and be free from defects in materials and workmanship. Actual warranties are offered by the manufacturer of the product and the terms vary. Warranties may not apply to defects or damages resulting from: a. Improper use, installation or maintenance b. Unauthorized modifications or alterations c. Force majeure events or acts of third parties 10. Product Returns Products shall not be returned to Riekes without its written consent. All costs of return shall be the responsibility of the Customer and include freight incurred and restocking fees. 11. Applicable Law This Agreement shall be governed by and construed in accordance with the law of the State of Nebraska, without regard to its choice of law provisions. In the event of litigation or other proceedings by Riekes to enforce or defend any term or provision of this Agreement, Customer agrees to pay all costs and expenses sustained by Riekes, including but not limited to, reasonable attorney fees. 12. Force Majeure Neither party shall be responsible for delays or failure in performance of this Agreement (other than failure to pay any amounts due) to the extent that such party was hindered in its performance by any act of God, civil commotion, labor dispute, unavailability or shortages of materials or any other occurrence beyond its reasonable control. 13. Binding Effect This Agreement shall be binding upon each of the parties hereto and each of their respective heirs, administrators, executors, personal representatives and permitted successors and assigns. Except to the extent prohibited by law, no third party shall be the beneficiary to any of the rights or obligations hereunder (including but not limited to, warranty obligations). 14. Riekes Agents Customer acknowledges that no agent, employee or representative of Riekes has any authority to bind Riekes to any affirmation, promise, representation, or warranty concerning any of the products and, unless such affirmation, promise, representation, or warranty is specifically set forth in this Agreement it does not form a basis of this bargain and shall not be enforceable against Riekes. 15. Acknowledgement Customer acknowledges and agrees that this is a non-cancellable transaction. Customer and Riekes Equipment. signatures on all necessary documents have been executed. A Customer signature or purchase order signifies acceptance of the details of this quote along with our terms of sale. Fax or email signatures and POs shall be accepted as original consent.
Get Quote
Get Flyer
Finance at $/mo
2018 Yale GC030VX
Riekes Equipment
 
Used
DETAILS
DESCRIPTION
CONTACT
FINANCE
WARRANTY
STK#:
EQ0048761-RSC
MAKE:
Yale
MODEL:
GC030VX
MAST TYPE:
Three Stage
MAST - LOWERED:
82 in
MAST - RAISED:
187 in
FUEL:
LP Gas
HOURS:
4096 Hrs
SIDESHIFTER:
YES
CAPACITY:
3000 lbs
PRICE
$16,956 USD
LP TANK SOLD SEPARATELY. DELIVERY & TAX NOT INCLUDED
Riekes Equipment
Used Equipment Team
Locations in, MO, IA, SD, ND &
, NE

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment Terms and Conditions 1. As used herein, Riekes shall mean Riekes Equipment Inc. Customer shall mean the person or business purchasing and Equipment shall mean the goods specified in the Order. 2. Offer of Sale Offers of sale are based on the terms and conditions included in the proposal and those provided below. Unless otherwise stated, offers are available for acceptance for a period of 30 days from the date of the quote. An order by the Customer shall constitute an acceptance of these terms and conditions of sale. 3. Equipment Trade ins Trade values are quoted per the condition of the equipment on the date it was inspected. Changes to the condition may result in reduced trade values and will be adjusted prior to the completion of the transaction. Equipment value is based on current market conditions. 4. Payment Terms Our standard terms are Net 30 days with approved credit. Unless otherwise specified, full payment of the total amount indicated in the Order shall be made on the date of delivery, or if partial delivery, the portion of such payment for the Equipment on the separate dates of delivery. If equipment is leased, the lease documents must be signed prior to order placement and the certificate of acceptance must be signed and dated upon delivery of equipment. Any invoices paid with a credit card are subject to a processing fee. 5. Prices Quoted monthly payments and sale prices are valid for orders placed within 30 days of the date of this quote and for equipment delivering within 120 days of the order. The final monthly payment may vary due to final credit approval. Prices quoted by Riekes are subject to change without notice. 6. Taxes Sales tax is not included in sale price or monthly lease payment. Except for amounts attributable to Riekes, the Customer shall be solely responsible for all federal, state and local taxes, duties, tariffs or other similar levies arising out of or related to the Equipment order in this Agreement. Customer indemnifies and holds Riekes harmless from the payment of any such taxes, plus any penalties, interest or costs. 7. Sale of Equipment and Delivery Unless indicated within this quote, all Equipment is sold Freight F.O.B. Factory. In the event that the equipment is delivered more than 120 days after the order was placed, the monthly payment may be subject to adjustment based on changes in the prevailing interest rates. This will be directed to us by the financial institutions and will be detailed in the lease documentation provided at the time of order placement. Riekes is not responsible for loading and unloading. 8. Availability Customer agrees that all products are subject to availability. The customer also agrees that Riekes Equipment, any agent, representative, employee or subsidiary of does not guarantee delivery lead times. All delivery lead times are controlled by the manufacturer. Should Riekes cancel any part of an order, the sole obligation shall be to return any down payment paid by the Customer. If the Customer is delinquent in the payment of any invoice, or is otherwise in breach of this Agreement, Riekes may at its discretion, withhold shipment (including partial shipments) of any order, and may require Customer to prepay future shipments. Riekes retains the right to suspend performance of any order or require advance payment when, in its opinion, the financial condition of Customer, or other grounds for insecurity warrant such action or it is required by the manufacturer. 9. Warranty and Statement of Quality We strive to provide our customers with products and services which meet and even exceed their expectations. All Used Truck sales are warrantied for 30 days following the sale date unless otherwise stated. Riekes warrants that any equipment provided under this agreement shall conform to the highest industry standards and be free from defects in materials and workmanship. Actual warranties are offered by the manufacturer of the product and the terms vary. Warranties may not apply to defects or damages resulting from: a. Improper use, installation or maintenance b. Unauthorized modifications or alterations c. Force majeure events or acts of third parties 10. Product Returns Products shall not be returned to Riekes without its written consent. All costs of return shall be the responsibility of the Customer and include freight incurred and restocking fees. 11. Applicable Law This Agreement shall be governed by and construed in accordance with the law of the State of Nebraska, without regard to its choice of law provisions. In the event of litigation or other proceedings by Riekes to enforce or defend any term or provision of this Agreement, Customer agrees to pay all costs and expenses sustained by Riekes, including but not limited to, reasonable attorney fees. 12. Force Majeure Neither party shall be responsible for delays or failure in performance of this Agreement (other than failure to pay any amounts due) to the extent that such party was hindered in its performance by any act of God, civil commotion, labor dispute, unavailability or shortages of materials or any other occurrence beyond its reasonable control. 13. Binding Effect This Agreement shall be binding upon each of the parties hereto and each of their respective heirs, administrators, executors, personal representatives and permitted successors and assigns. Except to the extent prohibited by law, no third party shall be the beneficiary to any of the rights or obligations hereunder (including but not limited to, warranty obligations). 14. Riekes Agents Customer acknowledges that no agent, employee or representative of Riekes has any authority to bind Riekes to any affirmation, promise, representation, or warranty concerning any of the products and, unless such affirmation, promise, representation, or warranty is specifically set forth in this Agreement it does not form a basis of this bargain and shall not be enforceable against Riekes. 15. Acknowledgement Customer acknowledges and agrees that this is a non-cancellable transaction. Customer and Riekes Equipment. signatures on all necessary documents have been executed. A Customer signature or purchase order signifies acceptance of the details of this quote along with our terms of sale. Fax or email signatures and POs shall be accepted as original consent.
Get Quote
Get Flyer
Finance at $/mo
Boomlift
National Lift Equipment
 
Used
DETAILS
DESCRIPTION
CONTACT
STK#:
146630
FUEL:
Diesel
HOURS:
0 Hrs
PRICE
CALL FOR PRICE
NLEQ# 146630, Diesel, 251000 Miles, RollBack Delivery Truck
National Lift Equipment
Sales
300 Pond St.
Bristol, PA 19007
Get Quote
Get Flyer
2013 Yale ERP030VT
Forklift Pro, Inc.
 
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
26639
MAKE:
Yale
MODEL:
ERP030VT
MAST TYPE:
Three Stage
MAST - RAISED:
216 in
FUEL:
Electric
HOURS:
10197 Hrs
SIDESHIFTER:
YES
CAPACITY:
3000 lbs
PRICE
$8,950 USD
  • Model: ERP030VT
  • Manufacturer: Yale
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: Electric
  • Performance
    • Load Capacity: 3,000 lbs
    • Travel Speed: Approximately 9 mph (no load)
    • Lift Speed: Approximately 80 feet/min (no load)
    • Load Center: 24 inches
    • Turning Radius: Approximately 54 inches
  • Dimensions
    • Overall Width: 41 inches
    • Overall Length to Fork Face: Approximately 74 inches
    • Wheelbase: 47 inches
    • Height to Top of Overhead Guard: 82 inches
    • Ground Clearance: 3.5 inches at the center of the wheelbase
  • Forks
    • Fork Length: Varies
    • Fork Width: 4 inches
    • Fork Thickness: 1.5 inches
  • Tires
    • Front Tires: Pneumatic, 18x7-8
    • Rear Tires: Pneumatic, 15x4.5-8
  • Battery
    • Battery Voltage: 48V
    • Battery Capacity: Typically between 500 Ah to 750 Ah
  • Weight
    • Truck Weight without Battery: Approximately 6,100 lbs
Forklift Pro, Inc.
Sales Department
9801 Industrial Drive
Pineville, NC 28134

FINANCING

All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Get Quote
Get Flyer
Finance at $/mo
2017 Raymond 960-CSR30T
Material Solutions INC
 
Used
DETAILS
DESCRIPTION
SPECS
CONTACT
STK#:
INV-808
MAKE:
Raymond
MODEL:
960-CSR30T
MAST TYPE:
Two Stage
MAST - LOWERED:
173 in
MAST - RAISED:
322 in
FUEL:
Electric
HOURS:
6400 Hrs
SIDESHIFTER:
YES
CAPACITY:
3000 lbs
PRICE
CALL FOR PRICE
2017 Excellent condition, delivery and set up included.
  • General Specifications
    • Model Number: 960-CSR30T
    • Manufacturer: Raymond
    • Type: Forklift
  • Dimensions
    • Overall Length: 116 inches
    • Overall Width: 48 inches
    • Overall Height (cab): 93 inches
  • Capacity
    • Rated Load Capacity: 3,000 lbs
    • Load Center: 24 inches
  • Weight
    • Service Weight: 8,300 lbs
  • Engine/Drive System
    • Drive Motor Power: 10 HP
    • Steering Type: Power Steering
    • Drive System: Electric
  • Performance
    • Travel Speed (loaded/unloaded): 5.5 mph
    • Lift Speed (loaded/unloaded): 55 ft/min
    • Gradeability (loaded/unloaded): 10%
  • Brakes
    • Service Brake: Mechanical
    • Parking Brake: Automatic
  • Tires
    • Type: Solid Pneumatic
    • Front Tire Size: 16 x 5 inches
    • Rear Tire Size: 12 x 4.5 inches
  • Battery
    • Battery Voltage: 36V
    • Battery Capacity: 750 Ah
  • Operator Environment
    • Seat Type: Adjustable
    • Display: Digital Dash
    • Controls: Fingertip Controls
Material Solutions INC
Joe Depinto
28C Industrial Drive
Hamilton, NJ 08619
Get Quote
Get Flyer

Your location is Columbus, OH. Modify

Equipment Finder Equipment
finder
Change Search Filters