9,519 Forklifts and Material Handling Equipment For Sale
Browse our complete selection of low priced used forklifts, lift trucks & material handling products for sale at locations near you. Compare prices here!
United Lift LLC Arcangelo Capozzolo: 716-281-1351 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Height to Top of Overhead Guard: Approximately 88 inches
Turning Radius: Approximately 80 inches
Wheelbase: Approximately 60 inches
Performance
Load Capacity: 6,000 lbs
Travel Speed (Loaded/Unloaded): Approximately 10/11 mph
Lift Speed (Loaded/Unloaded): Approximately 80/125 feet per minute
Lowering Speed (Loaded/Unloaded): Approximately 110/90 feet per minute
Gradeability (Loaded): Approximately 18%
Powertrain
Drive Motor: 15.6 HP AC Motor
Hydraulic Motor: 20.1 HP AC Motor
Battery Voltage: 36/48 V
Battery Capacity: 750-930 Ah
Chassis
Tire Type: Cushion
Front Tires: 2
Rear Tires: 2
Forks
Fork Length: Varies
Width: Approximately 5 inches (per fork)
Thickness: Approximately 1.75 inches
Other Features
Operator Compartment: Ergonomic design with adjustable seat
Steering System: Hydraulic power steering
Braking System: Regenerative and hydraulic disc brakes
Lighting: LED lights
Control: Electronic joystick
United Lift LLC Arcangelo Capozzolo: 716-281-1351 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
United Lift LLC Arcangelo Capozzolo: 716-281-1351 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
United Lift LLC Arcangelo Capozzolo: 716-281-1351 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Niagara Frontier Equipment Sales, Inc. Keith Hetrick Jr.: 1 716 219 7049 x190 4060 Lake Avenue Lockport, NY 14094
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Visibility: Panoramic visibility for improved safety
Additional Features
Hydraulics: High-performance hydraulic system
Lighting: Full lighting package for nighttime operation
Safety Features: Includes seat belts and backup alarms
Supreme Forklift & Equipment Sales Dept.: 480-660-4508 25250 S Power Rd Queen Creek, AZ 85142
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
United Lift LLC Arcangelo Capozzolo: 716-281-1351 300 International Dr. Suite 100 Williamsville, NY 14221
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Power Output: Varies; generally around 95 - 105 horsepower
Fuel Capacity: Approximately 17 - 20 gallons
Performance
Load Capacity: 17,500 - 26,000 lbs
Travel Speed: Approximately 12 - 15 mph (laden)
Lift Speed: Approximately 70 - 80 feet/min (laden)
Gradeability: Approximately 25 - 30% (laden)
Tire Specifications
Tire Type: Pneumatic
Tire Size Front: Approximately 8.25-15
Tire Size Rear: Approximately 8.25-15
Braking System
Service Brake: Hydraulic
Parking Brake: Mechanical hand operated
Hydraulic System
Pump Type: Gear pump
Hydraulic Tank Capacity: Approximately 15 gallons
Fork Details
Fork Length: Varies
Fork Spread: Approximately 7 - 40 inches (adjustable)
Florida Forklift Inc. Florida Forklift: 813-548-4081 3221 N. 40th Street Tampa, FL 33605
DUKE EQUIPMENT DBA FLORIDA FORKLIFT, INC. TERMS AND CONDITIONS
ACCEPTANCE. By its officers signature Duke Equipment DBA Florida Forklift, Inc. accepts Buyer’s order for equipment as described on the face hereof, but such acceptance is conditional upon acceptance by of the terms set forth herein. Seller should not be bound by any terms of Buyer’s other purchase order(s) which provide conditions additional to or different from the terms hereof.
SHIPMENT. Unless otherwise specifically agreed, all prices are for the material packed for domestic shipment and for delivery F.O.B. factory of point of shipment. Shipping dates are approximant and based on prompt receipt of all necessary information. All risk of loss shall be upon the Buyer from point of shipment. Buyer shall pay all transportation and delivery charges to final destination.
PAYMENT. Partial shipment may be made and payments thereof shall become due in accordance with the terms hereof. Finance charges are subject to terms in effect at the time of delivery of equipment herein described. The terms of the sale herein are subject to credit approval and Seller may at any time prior to delivery modify terms of the payment originally specified to assure prompt payment for the equipment ordered.
TAXES. Buyer is liable for the full amount of taxes applicable to, or as a result of, this transaction. Buyer shall pay the amount of all such taxes at any time requested by Seller as if originally added to price.
SECURITY INTEREST AND DEFAULT. Seller shall retain a security interest in the equipment delivered hereunder until the total selling price, including taxes, delivery and other charges, is paid in full by Buyer.
WARRANTY. The NEW equipment sold by Duke Equipment DBA Florida Forklift, Inc. is usually covered by the warranties of the original equipment manufacturers. When those warranties exist their terms and conditions are passed on to the Buyer of the new equipment and supported by Duke Equipment DBA Florida Forklift, Inc. Details of the original equipment manufacturers warranties are covered on separate documents and are available to Buyer upon request. The USED equipment sold by Duke Equipment DBA Florida Forklift, Inc. may or may not be covered by a warranty. If the warranty is provided it will be noted on the face of this order. If no stipulation regarding warranty is noted on the face of this order, no warranty, express or implied exist. In no event is any expressed or implied warranty of merchantability or fitness for a particular purpose in existence.
DELAYS. Seller shall not be liable for loss or damage due to delay in delivery or manufacture, resulting from any cause beyond Seller’s reason-able control. Any delays resulting from any such cause shall constitute a waiver of all claims and damages.
CANCELLATION. Buyer may cancel its order, reduce quantities, revise specifications or extend schedules only by mutual agreement with Seller as to reasonable and proper cancellation charges which shall take into account expenses already incurred and commitments made by Seller, and Buyer shall indemnify Seller against any loss resulting thereof.
ENTIRE AGREEMENT AND APPLICABLE LAW. The rights and obligations of Seller and Buyer shall be governed by the laws of the State of Florida. The provisions hereof are intended by Buyer and Seller as a final expression of their agreement and are intended also as a complete and exclusive statement of all the terms applicable to Buyer’s order. No waiver, modification, or addition to any of the terms hereof shall be binding on Seller unless made in writing.
CUSTOMER INITIALS______ Date:
Ironworks Trading Corporation Jon Bordeaux: 757-330-4191 1160 Harmony Rd Norfolk, VA 23502
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Big Joe Handling Systems Sales Dept: 510-617-1990 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height: Approximately 94 inches (to top of overhead guard)
Wheelbase: Approximately 76 inches
Performance
Load Capacity: Approximately 9,000 lbs
Travel Speed: Approximately 11.5 mph
Gradeability: Approximately 30%
Tire Specifications
Tire Type: Pneumatic
Number of Wheels: 4
Hydraulic System
Hydraulic System Pressure: Approximately 2,557 psi
Other Features
Operator Seat: Adjustable seat with seat belt
Steering: Hydrostatic power steering
Control: Fingertip controls
CALL FOR RENTAL RATES
Reserve Rental
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
TB Forklifts Antonio Borboa: 281-746-6799 5410 Mary Francis Dr Houston, TX 77039
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
TB Forklifts Antonio Borboa: 281-746-6799 5410 Mary Francis Dr Houston, TX 77039
All rental rates are subject to change without prior notice. Pricing may vary based on availability, demand, seasonal factors, or updates to policies. Rates provided at the time of inquiry or reservation are not guaranteed until confirmed. The rental provider reserves the right to adjust rates at their discretion.
Supreme Forklift & Equipment Sales Dept.: 480-660-4508 25250 S Power Rd Queen Creek, AZ 85142
Overall Length: 70 to 90 inches (varies depending on configuration)
Overall Width: 36 inches
Height to Top of Battery: 59 inches
Wheelbase: 55 inches
Weight: 2,200 lbs
Performance
Load Capacity: 8,000 lbs
Travel Speed (Loaded): 3.5 - 4.1 mph
Travel Speed (Unloaded): 4.5 - 5.3 mph
Gradeability (Loaded): Up to 5%
Gradeability (Unloaded): Up to 10%
Tires & Wheels
Drive Tire Size: 10 x 5 inches
Load Wheel Size: 3 x 3 inches
Tire Type: Polyurethane
Power & Battery
Battery Voltage: 24V
Battery Capacity: 510 Ah
Charger Type: Built-in
Features
AC Drive Motor
Ergonomic Control Handle
Regenerative Braking System
Low Step Height for Operator Comfort
Adjustable Fork Options
Welch Denver Jack Thompson: 720-471-5014 4210 Carson Street Denver , CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
2016 Crown PC4500-80 center rider, 27x96 forks, P/S
Mid Atlantic Industrial Equipment LTD. Sales Dept.: 717-276-0588 1231 E Wallace St York, PA 17403
FINANCING
Finance with
As low as
$/mo
Finance with
As low as
$/mo
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Overall Length: Approximately 69 inches (varies with fork length)
Width Across Forks: Approximately 27 inches
Height (top of handle): Approximately 49 inches
Performance
Travel Speed (Loaded/Unloaded): Approximately 3.7 mph / 3.9 mph
Lift Speed (Loaded/Unloaded): Approximately 0.6 ft/s / 0.8 ft/s
Gradeability (Loaded/Unloaded): 6% / 12%
Wheels
Drive Tire Material: Polyurethane
Load Wheels: Polyurethane
Additional Features
Regenerative Braking
Electric Lift/Lower Control
Electronic Throttle Control
Welch Equipment Company Inc Keith Fine: 719-625-2311 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.
Welch Equipment Company Inc Keith Fine: 719-625-2311 5025 Nome St Denver, CO 80239
USED LIFTS ARE PREPPED TO ORDER UNLESS OTHERWISE NOTED
AVERAGE LEAD TIME IS 6-8 WEEKS.
ALL CAPACITIES LISTED ARE BASIC CAPACITY FOR EQUIPMENT TYPE. CAPACITY LISTED DOES NOT INCLUDE ANY DERATE FOR ATTACHMENTS, FORKS OR OPTIONAL EQUIPMENT.
PRICES ARE EXCLUSIVE OF ANY SALES OR USE TAXES NOW IN FORCE. HOUR METER IS SUBJECT TO CHANGE.
YOUR SIGNATURE ON THIS PROPOSAL CONSTITUTES AN ORDER. ALL CANCELLED ORDERS WILL BE ASSESSED A 10% CANCELLATION FEE. PLEASE CALL YOUR WELCH REPRESENTATIVE FOR FURTHER INFORMATION.