Material handling equipment created by Mitsubishi is distinct in its focus on advanced technology, reliability, and ergonomic design. Mitsubishi places a strong emphasis on integrating state-of-the-art features such as advanced control systems and energy-efficient technologies into their equipment, making them highly efficient and environmentally friendly. Additionally, their equipment is known for its durability and robust construction, often resulting in lower maintenance requirements and longer service life compared to competitors. Mitsubishi also prioritizes operator comfort and safety, incorporating intuitive controls and ergonomic features to enhance ease of use and reduce operator fatigue. These attributes collectively make Mitsubishi a competitive choice in the material handling equipment market.
Discount Forklift Sales Dept 4905 Lima St Denver, CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
Fuel Type Used: LP Gas
Dimensions and Weight
Overall Length: Approximately 124 inches
Overall Width: 39 inches
Wheelbase: 55 inches
Overall Height to Top Overhead Guard: 82 inches
Ground Clearance: 3.5 inches
Base Weight: Approximately 7,000 lbs
Engine
Engine Model: Mitsubishi 4G63
Engine Type: 4-cylinder, Liquid-cooled
Fuel System: LP Gas
Capacity
Load Capacity: 3,500 lbs
Load Center: 24 inches
Performance
Travel Speed: Approximately 11 mph (unloaded)
Lift Speed: Approximately 100 feet per minute (laden)
Lowering Speed: Approximately 110 feet per minute (laden)
Drawbar Pull: 3,500 lbs
Tires
Front Tires: Cushion
Rear Tires: Cushion
Tire Size Front: 16x5-10.5
Tire Size Rear: 13x5-8
Brake System
Service Brakes: Hydraulic
Parking Brakes: Mechanical Lever Actuated
Steering
Steering System: Hydraulic Power Steering
Steering Angle: 90 degrees (total)
Forks
Fork Length: Varies
Adept Equipment Services, LLC Kacey Turnbo 5850 Dahlia St Commerce City, CO 80022
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Lifting Speed: 118 feet per minute (unloaded), 108 feet per minute (loaded)
Engine
Engine Model: Mitsubishi 4G63
Engine Type: 4-Cylinder, Liquid-Cooled, Gasoline
Displacement: 122 cubic inches
Rated Power: 59.8 HP at 2,700 RPM
Fuel Tank Capacity: 33.8 lbs
Tire Information
Front Tires: 7.00-12-12PR
Rear Tires: 6.00-9-10PR
Tire Type: Pneumatic
Other Features
Hydraulic System: Load Sensing
Transmission: Power Shift
Brakes: Hydraulic
Steering: Hydrostatic
MH Equipment Company Gresham Carter 3306 Gilmore Industrial Blvd Louisville, KY 40213
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
All units are sold as-is with no warranty. Batteries unless otherwise stated are not warrantied and are as is.
Miller Equipment Co. Foster Miller 1000 N First St Garland, TX 75040
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length (Without Forks): Approximately 9.3 ft
Overall Width: Approximately 3.75 ft
Overall Height (Cab): Approximately 6.8 ft
Wheelbase: About 5.5 ft
Minimum Ground Clearance: About 5.5 inches
Weight
Service Weight: Approximately 8,050 lbs
Axle Load Front: Varies based on load
Axle Load Rear: Varies based on load
Performance
Load Capacity: 5,000 lbs
Travel Speed (Unladen): Roughly 11.5 mph
Lifting Speed (Unladen): Approximately 108 ft/min
Lowering Speed (Unladen): Approximately 98 ft/min
Gradeability (Unladen): 21%
Engine Specifications
Engine Manufacturer: Mitsubishi
Engine Model: S4S
Power Output: Approximately 58 HP
Fuel Type: LPG
Number of Cylinders: 4
Displacement: About 143.2 cubic inches
Tires
Tire Type: Pneumatic
Number of Wheels: 4
Tire Size Front: 7.00-12-12PR
Tire Size Rear: 6.00-9-10PR
Brakes
Service Brake: Hydraulic System
Parking Brake: Mechanical Lever
Steering
Steering System: Hydraulic Power Steering
Turning Radius: Approximately 6.9 ft
Hydraulics
Hydraulic System Pressure: Roughly 2,400 psi
Hydraulic Tank Capacity: About 11 gallons
Other Features
Operator Seat: Adjustable with Suspension
Instrumentation: Comprehensive Instrument Panel
Safety Features: Overhead Guard, Seat Belt
DFW 219 David Burris 8800 Sterling St. Irving , TX 75063
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length (Without Forks): Approximately 9.3 ft
Overall Width: Approximately 3.75 ft
Overall Height (Cab): Approximately 6.8 ft
Wheelbase: About 5.5 ft
Minimum Ground Clearance: About 5.5 inches
Weight
Service Weight: Approximately 8,050 lbs
Axle Load Front: Varies based on load
Axle Load Rear: Varies based on load
Performance
Load Capacity: 5,000 lbs
Travel Speed (Unladen): Roughly 11.5 mph
Lifting Speed (Unladen): Approximately 108 ft/min
Lowering Speed (Unladen): Approximately 98 ft/min
Gradeability (Unladen): 21%
Engine Specifications
Engine Manufacturer: Mitsubishi
Engine Model: S4S
Power Output: Approximately 58 HP
Fuel Type: LPG
Number of Cylinders: 4
Displacement: About 143.2 cubic inches
Tires
Tire Type: Pneumatic
Number of Wheels: 4
Tire Size Front: 7.00-12-12PR
Tire Size Rear: 6.00-9-10PR
Brakes
Service Brake: Hydraulic System
Parking Brake: Mechanical Lever
Steering
Steering System: Hydraulic Power Steering
Turning Radius: Approximately 6.9 ft
Hydraulics
Hydraulic System Pressure: Roughly 2,400 psi
Hydraulic Tank Capacity: About 11 gallons
Other Features
Operator Seat: Adjustable with Suspension
Instrumentation: Comprehensive Instrument Panel
Safety Features: Overhead Guard, Seat Belt
DFW 219 David Burris 8800 Sterling St. Irving , TX 75063
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length (Without Forks): Approximately 9.3 ft
Overall Width: Approximately 3.75 ft
Overall Height (Cab): Approximately 6.8 ft
Wheelbase: About 5.5 ft
Minimum Ground Clearance: About 5.5 inches
Weight
Service Weight: Approximately 8,050 lbs
Axle Load Front: Varies based on load
Axle Load Rear: Varies based on load
Performance
Load Capacity: 5,000 lbs
Travel Speed (Unladen): Roughly 11.5 mph
Lifting Speed (Unladen): Approximately 108 ft/min
Lowering Speed (Unladen): Approximately 98 ft/min
Gradeability (Unladen): 21%
Engine Specifications
Engine Manufacturer: Mitsubishi
Engine Model: S4S
Power Output: Approximately 58 HP
Fuel Type: LPG
Number of Cylinders: 4
Displacement: About 143.2 cubic inches
Tires
Tire Type: Pneumatic
Number of Wheels: 4
Tire Size Front: 7.00-12-12PR
Tire Size Rear: 6.00-9-10PR
Brakes
Service Brake: Hydraulic System
Parking Brake: Mechanical Lever
Steering
Steering System: Hydraulic Power Steering
Turning Radius: Approximately 6.9 ft
Hydraulics
Hydraulic System Pressure: Roughly 2,400 psi
Hydraulic Tank Capacity: About 11 gallons
Other Features
Operator Seat: Adjustable with Suspension
Instrumentation: Comprehensive Instrument Panel
Safety Features: Overhead Guard, Seat Belt
DFW 219 David Burris 8800 Sterling St. Irving , TX 75063
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length (Without Forks): Approximately 9.3 ft
Overall Width: Approximately 3.75 ft
Overall Height (Cab): Approximately 6.8 ft
Wheelbase: About 5.5 ft
Minimum Ground Clearance: About 5.5 inches
Weight
Service Weight: Approximately 8,050 lbs
Axle Load Front: Varies based on load
Axle Load Rear: Varies based on load
Performance
Load Capacity: 5,000 lbs
Travel Speed (Unladen): Roughly 11.5 mph
Lifting Speed (Unladen): Approximately 108 ft/min
Lowering Speed (Unladen): Approximately 98 ft/min
Gradeability (Unladen): 21%
Engine Specifications
Engine Manufacturer: Mitsubishi
Engine Model: S4S
Power Output: Approximately 58 HP
Fuel Type: LPG
Number of Cylinders: 4
Displacement: About 143.2 cubic inches
Tires
Tire Type: Pneumatic
Number of Wheels: 4
Tire Size Front: 7.00-12-12PR
Tire Size Rear: 6.00-9-10PR
Brakes
Service Brake: Hydraulic System
Parking Brake: Mechanical Lever
Steering
Steering System: Hydraulic Power Steering
Turning Radius: Approximately 6.9 ft
Hydraulics
Hydraulic System Pressure: Roughly 2,400 psi
Hydraulic Tank Capacity: About 11 gallons
Other Features
Operator Seat: Adjustable with Suspension
Instrumentation: Comprehensive Instrument Panel
Safety Features: Overhead Guard, Seat Belt
DFW 219 David Burris 8800 Sterling St. Irving , TX 75063
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Length: Approximately 129 inches (varies with fork length)
Overall Width: Approximately 42 inches
Overall Height (with non-collapsed mast): Approximately 86 inches
Wheelbase: Approximately 57 inches
Weight
Operational Weight: Approximately 7,480 lbs
Capacity
Load Capacity: 5,000 lbs
Performance
Travel Speed: Approximately 11 mph
Lift Speed: Varies
Gradeability: Varies, typically around 27%
Turning Radius: Approximately 81 inches
Tires
Type: Cushion
Tire Configuration: 4 Wheel
Forks
Fork Length: Varies
Western Material Handling Dennis Firkins 1113 N. College Ave Ft Collins, CO 80524
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Lifting Speed: 118 feet per minute (unloaded), 108 feet per minute (loaded)
Engine
Engine Model: Mitsubishi 4G63
Engine Type: 4-Cylinder, Liquid-Cooled, Gasoline
Displacement: 122 cubic inches
Rated Power: 59.8 HP at 2,700 RPM
Fuel Tank Capacity: 33.8 lbs
Tire Information
Front Tires: 7.00-12-12PR
Rear Tires: 6.00-9-10PR
Tire Type: Pneumatic
Other Features
Hydraulic System: Load Sensing
Transmission: Power Shift
Brakes: Hydraulic
Steering: Hydrostatic
Chicago Industrial Equipment Justin Cyrnek 600 Oakwood Ct Rockdale, IL 60436
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Lifting Speed: 118 feet per minute (unloaded), 108 feet per minute (loaded)
Engine
Engine Model: Mitsubishi 4G63
Engine Type: 4-Cylinder, Liquid-Cooled, Gasoline
Displacement: 122 cubic inches
Rated Power: 59.8 HP at 2,700 RPM
Fuel Tank Capacity: 33.8 lbs
Tire Information
Front Tires: 7.00-12-12PR
Rear Tires: 6.00-9-10PR
Tire Type: Pneumatic
Other Features
Hydraulic System: Load Sensing
Transmission: Power Shift
Brakes: Hydraulic
Steering: Hydrostatic
Chicago Industrial Equipment Justin Cyrnek 600 Oakwood Ct Rockdale, IL 60436
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Lifting Speed: 118 feet per minute (unloaded), 108 feet per minute (loaded)
Engine
Engine Model: Mitsubishi 4G63
Engine Type: 4-Cylinder, Liquid-Cooled, Gasoline
Displacement: 122 cubic inches
Rated Power: 59.8 HP at 2,700 RPM
Fuel Tank Capacity: 33.8 lbs
Tire Information
Front Tires: 7.00-12-12PR
Rear Tires: 6.00-9-10PR
Tire Type: Pneumatic
Other Features
Hydraulic System: Load Sensing
Transmission: Power Shift
Brakes: Hydraulic
Steering: Hydrostatic
Chicago Industrial Equipment Justin Cyrnek 600 Oakwood Ct Rockdale, IL 60436
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Lifting Speed: 118 feet per minute (unloaded), 108 feet per minute (loaded)
Engine
Engine Model: Mitsubishi 4G63
Engine Type: 4-Cylinder, Liquid-Cooled, Gasoline
Displacement: 122 cubic inches
Rated Power: 59.8 HP at 2,700 RPM
Fuel Tank Capacity: 33.8 lbs
Tire Information
Front Tires: 7.00-12-12PR
Rear Tires: 6.00-9-10PR
Tire Type: Pneumatic
Other Features
Hydraulic System: Load Sensing
Transmission: Power Shift
Brakes: Hydraulic
Steering: Hydrostatic
Chicago Industrial Equipment Justin Cyrnek 600 Oakwood Ct Rockdale, IL 60436
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Lifting Speed: 118 feet per minute (unloaded), 108 feet per minute (loaded)
Engine
Engine Model: Mitsubishi 4G63
Engine Type: 4-Cylinder, Liquid-Cooled, Gasoline
Displacement: 122 cubic inches
Rated Power: 59.8 HP at 2,700 RPM
Fuel Tank Capacity: 33.8 lbs
Tire Information
Front Tires: 7.00-12-12PR
Rear Tires: 6.00-9-10PR
Tire Type: Pneumatic
Other Features
Hydraulic System: Load Sensing
Transmission: Power Shift
Brakes: Hydraulic
Steering: Hydrostatic
Chicago Industrial Equipment Justin Cyrnek 600 Oakwood Ct Rockdale, IL 60436
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close