Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
Refurbished machine ready to work. Sideshift, LEDs, new cushion tires, new chains, new paint, fresh service. 3.5K capacity. Runs like a dream, quiet operation.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: FGC18K
  • Manufacturer: Mitsubishi
  • Type: Forklift
  • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
  • Fuel Type Used: LP Gas
  • Dimensions and Weight
    • Overall Length: Approximately 124 inches
    • Overall Width: 39 inches
    • Wheelbase: 55 inches
    • Overall Height to Top Overhead Guard: 82 inches
    • Ground Clearance: 3.5 inches
    • Base Weight: Approximately 7,000 lbs
  • Engine
    • Engine Model: Mitsubishi 4G63
    • Engine Type: 4-cylinder, Liquid-cooled
    • Fuel System: LP Gas
  • Capacity
    • Load Capacity: 3,500 lbs
    • Load Center: 24 inches
  • Performance
    • Travel Speed: Approximately 11 mph (unloaded)
    • Lift Speed: Approximately 100 feet per minute (laden)
    • Lowering Speed: Approximately 110 feet per minute (laden)
    • Drawbar Pull: 3,500 lbs
  • Tires
    • Front Tires: Cushion
    • Rear Tires: Cushion
    • Tire Size Front: 16x5-10.5
    • Tire Size Rear: 13x5-8
  • Brake System
    • Service Brakes: Hydraulic
    • Parking Brakes: Mechanical Lever Actuated
  • Steering
    • Steering System: Hydraulic Power Steering
    • Steering Angle: 90 degrees (total)
  • Forks
    • Fork Length: Varies

2003 Mitsubishi FGC18K

cushion tire 4 wheel sit down (indoor warehouse) lp gas

$9,950 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Kacey Turnbo
Phone:

ADDRESS
Adept Equipment Services, LLC
5850 Dahlia St
Commerce CityColorado 80022
ATTRIBUTES
YEAR:
2003
Manufacturer:
MODEL #:
CAPACITY:
3500
FUEL:
MAST TYPE:
MAST HEIGHT:
89 / 189 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
5688
UNIT LOCATION:
Colorado [80022]
DESCRIPTION:
Refurbished Cushion Mitsubishi LP 3.5K
POST DATE:
7/28/2026
Reviews
Useful
Not

The Mitsubishi Forklift Model FGC18K has made quite an impression in the warehouse where I work. It’s surprisingly nimble for its size, which really comes in handy when navigating tight spaces between racks. The LP gas operation means it has enough power to keep up with our busy shifts without the hassle of charging batteries. I remember the first time I hopped on this machine; it felt like an instant connection—everything from the steering to the brake response just clicked. We’ve put it through its paces daily, and it has held up tremendously well, making my job a lot easier when things get hectic. Definitely a solid choice for indoor operations.



Review by Jake Montgomery (10/5/2025)

  • Model Number: FGC18K
  • Manufacturer: Mitsubishi
  • Type: Forklift
  • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
  • Fuel Type Used: LP Gas
  • Dimensions and Weight
    • Overall Length: Approximately 124 inches
    • Overall Width: 39 inches
    • Wheelbase: 55 inches
    • Overall Height to Top Overhead Guard: 82 inches
    • Ground Clearance: 3.5 inches
    • Base Weight: Approximately 7,000 lbs
  • Engine
    • Engine Model: Mitsubishi 4G63
    • Engine Type: 4-cylinder, Liquid-cooled
    • Fuel System: LP Gas
  • Capacity
    • Load Capacity: 3,500 lbs
    • Load Center: 24 inches
  • Performance
    • Travel Speed: Approximately 11 mph (unloaded)
    • Lift Speed: Approximately 100 feet per minute (laden)
    • Lowering Speed: Approximately 110 feet per minute (laden)
    • Drawbar Pull: 3,500 lbs
  • Tires
    • Front Tires: Cushion
    • Rear Tires: Cushion
    • Tire Size Front: 16x5-10.5
    • Tire Size Rear: 13x5-8
  • Brake System
    • Service Brakes: Hydraulic
    • Parking Brakes: Mechanical Lever Actuated
  • Steering
    • Steering System: Hydraulic Power Steering
    • Steering Angle: 90 degrees (total)
  • Forks
    • Fork Length: Varies
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following