New Feature: Eliftruck Price Point Introducing Eliftruck Price Point — the forklift price estimator built for buyers, sellers, and fleet managers. Instantly get accurate, market-based valuations with just a few details.
Don’t overpay or undersell—discover your forklift’s true market value in seconds. Click on the PRICE POINT orange button below to get started.
4,721 Forklifts and Material Handling Equipment For Sale
Browse our complete selection of low priced used forklifts, lift trucks & material handling products for sale at locations near you. Compare prices here!
3st 83/187 Mast Side Shift, LP Gas, 42" Forks, New Air Tires
General Information
Model Number: FG15L-A
Manufacturer: TCM
Type: Forklift
Subtype: Pneumatic Tire 4 Wheel Sit Down
Fuel Type Used: LP Gas
Engine
Power Source: LP Gas
Engine Type: Internal Combustion
Dimensions
Length to Fork Face: Approximately 132 inches
Overall Width: Approximately 42 inches
Height to Top of Overhead Guard: Approximately 84 inches
Wheelbase: Approximately 56 inches
Performance
Rated Capacity: Approximately 3,000 lbs
Travel Speed: Approximately 11 mph
Lift Speed: Varies by load weight and power utilization
Wheels & Tires
Front Tire Type: Pneumatic
Rear Tire Type: Pneumatic
Operational
Steering: Power Steering
Brake: Hydraulic
Additional Features
Operators Compartment: Ergonomically designed with adjustable seats
Safety Features: Overhead guard and seat belt
New Tec, Inc. Joe or Marlin 3764 US 75 Ave Sioux Center, IA 51250
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Niagara Frontier Equipment Sales, Inc. Keith Hetrick Jr. 4060 Lake Avenue Lockport, NY 14094
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Niagara Frontier Equipment Sales, Inc. Keith Hetrick Jr. 4060 Lake Avenue Lockport, NY 14094
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Kubota Engine, 7.5" Staggered Block Tracks, Aux Hyd
Engine
Type: Kubota D722
Number of cylinders: 3
Displacement: 43.9 cubic inches
Gross horsepower: 10.1 hp
Dimensions
Length (transport): 9 ft 5.8 in
Width: 2 ft 4 in
Height: 7 ft 4.2 in
Ground clearance: 5.9 in
Operational
Fuel capacity: 3.4 gal
Operating weight: 2201 lbs
Performance
Maximum digging depth: 5 ft 8.9 in
Maximum dump height: 6 ft 10.7 in
Travel speed (forward): 1.5 mph
Hydraulic System
Auxiliary hydraulic flow: 3.1 gpm
Main pump flow: 6.3 gpm
New Tec, Inc. Joe or Marlin 3764 US 75 Ave Sioux Center, IA 51250
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Niagara Frontier Equipment Sales, Inc. Keith Hetrick Jr. 4060 Lake Avenue Lockport, NY 14094
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Niagara Frontier Equipment Sales, Inc. Keith Hetrick Jr. 4060 Lake Avenue Lockport, NY 14094
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Niagara Frontier Equipment Sales, Inc. Keith Hetrick Jr. 4060 Lake Avenue Lockport, NY 14094
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height (Overhead Guard): Approximately 85 inches
Wheelbase: 70.1 inches
Weights:
Service Weight: Approximately 9,880 lbs
Axle Loading (Front, Loaded): 14,770 lbs
Axle Loading (Rear, Unloaded): 3,300 lbs
Power Train:
Transmission: Powershift
Number of Speeds (Forward/Reverse): 1 / 1
Fuel Tank Capacity: 15.8 gallons
Tire Information:
Tire Type (Front/Rear): Pneumatic
Tire Size (Front): 7.00-12
Tire Size (Rear): 6.00-9
Holt of California David 3850 Channel Dr W Sacramento, CA 95691
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Lift Speed (Unloaded): Approximately 118 feet per minute
Lift Speed (Loaded): Approximately 86 feet per minute
Dimensions
Overall Width: 42 inches
Overall Length: Varies with fork length
Wheelbase: 60 inches
Overall Height: 89 inches (standard)
Weight
Approximate Machine Weight: 8,600 lbs
Tires
Type: Cushion
Front Tires: 21 x 7 inches
Rear Tires: 16 x 5 inches
Battery
Voltage: 48V
Capacity: 750 Ah
Additional Features
AC Drive Motor
Curve Control
Regenerative Braking
Somerset Equipment Sales - Illinois George Rieber 1375 Kingsland Batavia , IL 60510
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Protection: Overload, Short Circuit, Reverse Polarity
Indicators: LED Status Indicators
Operating Temperature Range: 32°F to 104°F
Storage Temperature Range: -4°F to 140°F
Humidity: 0% to 95% Non-Condensing
Safety and Compliance
Certifications: UL Listed, CE Marked
Standards: Conforms to RoHS
Electrical Safety: Complies with NEC
TB Forklifts Antonio Borboa 5410 Mary Francis Dr Houston, TX 77039
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Overall Height: Varies, depending on cabin or overhead guard configuration
Wheelbase: Approximately 59.5 inches
Ground Clearance: Approximately 3 inches
Weight
Service Weight: Varies depending on configuration, generally around 7,000 lbs to 8,000 lbs
Performance
Capacity: 3,000 lbs
Travel Speed: Up to 6 miles per hour (unloaded)
Lift Speed: Approximately 60 feet per minute (unloaded)
Lowering Speed: Approximately 98 feet per minute (unloaded)
Battery and Power
Battery Type: Lead-acid
Battery Voltage: 36 Volts
Battery Capacity: Varies, typically around 775 amp-hours
Fork Specifications
Fork Length: Varies
Fork Width: 3.9 inches
Fork Thickness: 1.6 inches
Steering and Brakes
Steering: Electric Power Steering
Braking System: Regenerative braking with electromagnetic disc brakes
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Hyster 7,000 Cap Propane Sitdown Forklft - Dbl Fork
Manufacturer: Hyster
Model: S70FT
General Specifications:
Drive: LPG
Operator Type: Seated
Load Capacity: 7,000 lbs
Wheelbase: 70.9 inches
Weight: Approximately 11,050 lbs
Engine:
Engine Manufacturer: PSI
Engine Type: 4.3L V6
Dimensions:
Overall Length to Fork Face: 103 inches
Overall Width: 47.2 inches
Fork Length: Varies
Tire Type:
Standard: Pneumatic
Performance:
Travel Speed (Loaded): 11.3 mph
Travel Speed (Unloaded): 11.6 mph
Lifting Speed (Loaded): Approximately 98 feet per minute
Lifting Speed (Unloaded): Approximately 112 feet per minute
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
National Equipment, LLC Jim Gagliardi 12201 Hwy 99 (at Ave 12) Madera, CA 93638
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close