Hitachi's material handling equipment stands out due to its integration of advanced technology and a strong focus on innovation and sustainability. The company emphasizes the use of cutting-edge automation and IoT solutions to enhance efficiency and productivity in material handling processes. Hitachi's equipment is known for its reliability, durability, and ease of maintenance, reflecting Japan's high engineering standards. Additionally, the company's commitment to sustainability is evident in its development of energy-efficient machines that aim to reduce environmental impact, aligning with global trends towards eco-friendly industrial practices. This combination of technology, sustainability, and reliability differentiates Hitachi's offerings from its competitors.
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Hydraulic Cycle Time: Approximately 10 seconds (total)
Hydraulic System Pressure: Approximately 3,336 psi
Hydraulic Pump Flow: Approximately 44 gallons per minute
Fuel and Fluids
Fuel Tank Capacity: Approximately 65 gallons
Hydraulic Oil Tank Capacity: Approximately 21 gallons
Tires
Tire Size: 20.5 R25
Cab and Controls
ROPS/FOPS Certified Cab
Adjustable Steering Column
Air Conditioning
J&J Truck Sales, Inc. Forrest Dodson: 434-215-0641 11453 US Hwy. 29 Chatham, VA 24531
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Bucket capacity: Approximately 0.26 - 0.38 cubic yards
Max digging depth: Approximately 14 feet
Max digging reach: Approximately 23 feet
Max travel speed: Approximately 3.1 mph
Swing speed: About 9.3 rpm
Hydraulic System
Pump type: Variable axial piston pump
Total flow rate: Approximately 32 gallons per minute
Relief valve setting: Approximately 3,770 psi
Undercarriage
Width: Adjustable
Shoe width: Approximately 18 inches
Travel motor: Axial piston motor with parking brake
Operator Cab
Seat: Fully adjustable suspension seat
Controls: Ergonomic design with easy access layout
Visibility: Wide window view for optimal visibility
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Main Pumps: 2 variable displacement axial piston pumps
Hydraulic Flow: 61.8 gallons per minute
Pressure Setting: 4,970 psi
Capacities
Fuel Tank: 106 gallons
Hydraulic Oil Tank: 38 gallons
Tracks
Track Shoe Width: 23.6 inches
Number of Shoes Per Side: 49
Shoes Type: Triple grouser
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Pump Flow Capacity: Approximately 135 gallons per minute
Relief Valve Pressure: Approximately 5,080 psi
Track System
Track Length: Approximately 14.1 ft
Track Width: Approximately 32 inches
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Cab features: Air conditioning, adjustable seating
Extended maintenance intervals
Advanced hydraulic technology for increased efficiency
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Listings above this line match your search request, listings below may not match but are similar and may be used as an alternative.
1984 Cat D8K
National Equipment, LLC
22
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
584
MAKE:
Cat
MODEL:
D8K
PRICE
$52,000 USD
Model Information
Model Number: D8K
Manufacturer: Cat (Caterpillar)
Subtype: Earth Moving and Construction
Engine
Gross Power: 300 hp
Engine Model: Caterpillar D342
Cylinders: 6
Bore: 5.4 in
Stroke: 6 in
Displacement: 1,090 cu in
Dimensions
Length: 18 ft 6 in
Width: 10 ft
Height: 11 ft 9 in
Ground Clearance: 1 ft 6 in
Track Gauge: 7 ft 2 in
Weights
Operating Weight: 67,500 lbs
Ballast Configuration Weight: 3,300 lbs
Performance
Drawbar Pull: 80,500 lbs
Steering Clutch: Disc
Transmission: Powershift
Number of Forward Gears: 3
Number of Reverse Gears: 3
Top Forward Speed: 7.3 mph
Top Reverse Speed: 8.9 mph
Fuel Capacity
Fuel Tank: 168 gal
Hydraulic System
Pump Flow Capacity: 45 gal/min
Relief Valve Pressure: 2,700 psi
National Equipment, LLC Jim Gagliardi: 559-517-3272 12201 Hwy 99 (at Ave 12) Madera, CA 93638
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
National Equipment, LLC Jim Gagliardi: 559-517-3272 12201 Hwy 99 (at Ave 12) Madera, CA 93638
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
4M Iron Mike Finley: 843-594-0077 344 Winningham Road, St. George, SC 29477
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
National Equipment, LLC Jim Gagliardi: 559-517-3272 12201 Hwy 99 (at Ave 12) Madera, CA 93638
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Niagara Frontier Equipment Sales, Inc. Keith Hetrick Jr.: 1 716 219 7049 x190 4060 Lake Avenue Lockport, NY 14094
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
National Equipment, LLC Jim Gagliardi: 559-517-3272 12201 Hwy 99 (at Ave 12) Madera, CA 93638
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close