Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
Used 2011 Linde Forklift Model #: H30CT Basic Capacity: 6,000 lbs. Hours: 16, 219 Fuel: LPG Mast Type: Triple Maximum Fork Height: 217” Lowered Height: 97" Tires: Cushion 4-Way Hydraulics Status: Wholesale Condition Report Available Upon Request Warranty: AS-IS
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: H30CT
    • Manufacturer: Linde
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Width: Approximately 45 inches
    • Overall Length (without forks): Approximately 95 inches
    • Wheelbase: Approximately 65 inches
    • Ground Clearance: Approximately 4 inches
  • Engine
    • Fuel Type: LP Gas
    • Engine Power: Typically around 60-65 horsepower
  • Performance
    • Load Capacity: 6,000 lbs
    • Travel Speed (laden): Approximately 11 mph
  • Chassis
    • Drive Tires: Pneumatic
    • Steering Tires: Pneumatic
  • Forks
    • Fork Length: Varies
  • Operator Environment
    • Operator Position: Sit Down
    • Controls: Ergonomic design for operator comfort

2011 Linde H30CT

cushion tire 4 wheel sit down (indoor warehouse) lp gas

$3,900 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Ashley Hall
Phone:
Website:

ADDRESS
Wolter, Inc.
820 S Post Rd
IndianapolisIndiana 46239
ATTRIBUTES
STOCK #:
115554
YEAR:
2011
Manufacturer:
MODEL #:
CAPACITY:
6000
FUEL:
MAST TYPE:
MAST HEIGHT:
217 in
SERIAL #:
A11313B00150
CONDITION:
Used
HOUR METER:
16219
UNIT LOCATION:
Indiana [46239]
POST DATE:
7/10/2026
Reviews
Useful
Not

The Linde H30CT forklift has been a solid addition to our warehouse operations. Its pneumatic tires handle the rough terrain pretty well, which has made loading and unloading a lot smoother. I remember when we first got it and had to stack some heavier pallets; it really took the stress off our backs. The LP gas fuel is efficient and offers decent power, so moving loads around feels effortless compared to some other forklifts I've driven in the past. Overall, it’s been reliable and easy to operate, making it a great everyday workhorse in our fleet.



Review by Jake Thompson (8/2/2025)

  • General Specifications
    • Model Number: H30CT
    • Manufacturer: Linde
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Width: Approximately 45 inches
    • Overall Length (without forks): Approximately 95 inches
    • Wheelbase: Approximately 65 inches
    • Ground Clearance: Approximately 4 inches
  • Engine
    • Fuel Type: LP Gas
    • Engine Power: Typically around 60-65 horsepower
  • Performance
    • Load Capacity: 6,000 lbs
    • Travel Speed (laden): Approximately 11 mph
  • Chassis
    • Drive Tires: Pneumatic
    • Steering Tires: Pneumatic
  • Forks
    • Fork Length: Varies
  • Operator Environment
    • Operator Position: Sit Down
    • Controls: Ergonomic design for operator comfort
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following