Overview
Spec Sheet
Shipping/Freight
Equipment Description
1979 CAT D8k 76V716 Powershift Transmission. Canopy, MS Ripper, SU Blade, Trans Issue, Spacer Block Engine,
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Information
    • Model Number: D8K
    • Manufacturer: Cat (Caterpillar)
    • Subtype: Earth Moving and Construction
  • Engine
    • Gross Power: 300 hp
    • Engine Model: Caterpillar D342
    • Cylinders: 6
    • Bore: 5.4 in
    • Stroke: 6 in
    • Displacement: 1,090 cu in
  • Dimensions
    • Length: 18 ft 6 in
    • Width: 10 ft
    • Height: 11 ft 9 in
    • Ground Clearance: 1 ft 6 in
    • Track Gauge: 7 ft 2 in
  • Weights
    • Operating Weight: 67,500 lbs
    • Ballast Configuration Weight: 3,300 lbs
  • Performance
    • Drawbar Pull: 80,500 lbs
    • Steering Clutch: Disc
    • Transmission: Powershift
    • Number of Forward Gears: 3
    • Number of Reverse Gears: 3
    • Top Forward Speed: 7.3 mph
    • Top Reverse Speed: 8.9 mph
  • Fuel Capacity
    • Fuel Tank: 168 gal
  • Hydraulic System
    • Pump Flow Capacity: 45 gal/min
    • Relief Valve Pressure: 2,700 psi

1979 Cat D8K

earth moving and construction

$37,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Jim Gagliardi
Phone:

ADDRESS
National Equipment, LLC
12201 Hwy 99 (at Ave 12)
MaderaCalifornia 93638
ATTRIBUTES
STOCK #:
150115955260
YEAR:
1979
Manufacturer:
MODEL #:
SERIAL #:
76V00716
CONDITION:
Used
UNIT LOCATION:
California [93638]
POST DATE:
2/16/2026
  • Model Information
    • Model Number: D8K
    • Manufacturer: Cat (Caterpillar)
    • Subtype: Earth Moving and Construction
  • Engine
    • Gross Power: 300 hp
    • Engine Model: Caterpillar D342
    • Cylinders: 6
    • Bore: 5.4 in
    • Stroke: 6 in
    • Displacement: 1,090 cu in
  • Dimensions
    • Length: 18 ft 6 in
    • Width: 10 ft
    • Height: 11 ft 9 in
    • Ground Clearance: 1 ft 6 in
    • Track Gauge: 7 ft 2 in
  • Weights
    • Operating Weight: 67,500 lbs
    • Ballast Configuration Weight: 3,300 lbs
  • Performance
    • Drawbar Pull: 80,500 lbs
    • Steering Clutch: Disc
    • Transmission: Powershift
    • Number of Forward Gears: 3
    • Number of Reverse Gears: 3
    • Top Forward Speed: 7.3 mph
    • Top Reverse Speed: 8.9 mph
  • Fuel Capacity
    • Fuel Tank: 168 gal
  • Hydraulic System
    • Pump Flow Capacity: 45 gal/min
    • Relief Valve Pressure: 2,700 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following