Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
CAB
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: LK 8M22
    • Manufacturer: LiftKing
    • Type: Forklift
    • Subtype: Rough Terrain (Vertical Mast)
    • Fuel Type: Diesel
  • Engine Specifications
    • Engine Type: Diesel Engine
    • Horsepower: Approximately 100 HP
    • Cylinder Count: 4 to 6 Cylinders
    • Displacement: Varies, typically around 200-300 cubic inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: Typically up to 15 mph
    • Turning Radius: Approximately 10-15 ft
  • Dimensions
    • Overall Length: Approximately 12-15 ft (excludes fork length)
    • Overall Width: Around 6-8 ft
    • Overall Height: Varies by configuration, typically over 8 ft when mast is retracted
    • Ground Clearance: Roughly 1-2 ft
  • Tire and Wheelbase
    • Tire Type: Pneumatic
    • Wheelbase: Approximately 7-9 ft
  • Fork Specifications
    • Fork Length: Varies
    • Fork Width: Typically around 4-5 inches
    • Fork Thickness: Approximately 1.5-2 inches
  • Hydraulic System
    • Hydraulic Pressure: Typically 3,000 psi
    • Hydraulic Fluid Capacity: Varies, often around 10-15 gallons
  • Weight
    • Operating Weight: Approximately 15,000-20,000 lbs
  • Additional Features
    • Transmission Type: Manual or Automatic
    • Operator Cabin: Open or Enclosed Options
    • Lighting: Standard work and safety lights
    • Attachments: Compatibility with various lifting and handling attachments

2012 LiftKing LK8M22

rough terrain (vertical mast) diesel

Call for price
 
CONTACT INFO
Name:
Sales
Phone:

ADDRESS
Friskney Equipment Co
101 Woodhull Dr
AngolaIndiana 46703-934
ATTRIBUTES
STOCK #:
13294
YEAR:
2012
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
MAST HEIGHT:
107 / 120 in
SERIAL #:
LT2237
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
5553
UNIT LOCATION:
Indiana [46703-934]
POST DATE:
4/20/2026
Reviews
Useful
Not

The LiftKing LK 8M22 has become a real workhorse on our construction site. It's impressive how it tackles rough terrain without breaking a sweat—definitely a step up from the last forklift we used, which was more suited for flat surfaces. I remember one day when we needed to unload a shipment of materials on a challenging slope; it managed the job like a champ, gliding over obstacles and making our lives a lot easier. The diesel engine has plenty of power, and it’s surprisingly fuel-efficient for its size. Overall, this forklift has proven to be a reliable partner when we’re pushing the limits on rugged jobs.



Review by Mike Anderson (10/5/2025)

  • General Specifications
    • Model Number: LK 8M22
    • Manufacturer: LiftKing
    • Type: Forklift
    • Subtype: Rough Terrain (Vertical Mast)
    • Fuel Type: Diesel
  • Engine Specifications
    • Engine Type: Diesel Engine
    • Horsepower: Approximately 100 HP
    • Cylinder Count: 4 to 6 Cylinders
    • Displacement: Varies, typically around 200-300 cubic inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: Typically up to 15 mph
    • Turning Radius: Approximately 10-15 ft
  • Dimensions
    • Overall Length: Approximately 12-15 ft (excludes fork length)
    • Overall Width: Around 6-8 ft
    • Overall Height: Varies by configuration, typically over 8 ft when mast is retracted
    • Ground Clearance: Roughly 1-2 ft
  • Tire and Wheelbase
    • Tire Type: Pneumatic
    • Wheelbase: Approximately 7-9 ft
  • Fork Specifications
    • Fork Length: Varies
    • Fork Width: Typically around 4-5 inches
    • Fork Thickness: Approximately 1.5-2 inches
  • Hydraulic System
    • Hydraulic Pressure: Typically 3,000 psi
    • Hydraulic Fluid Capacity: Varies, often around 10-15 gallons
  • Weight
    • Operating Weight: Approximately 15,000-20,000 lbs
  • Additional Features
    • Transmission Type: Manual or Automatic
    • Operator Cabin: Open or Enclosed Options
    • Lighting: Standard work and safety lights
    • Attachments: Compatibility with various lifting and handling attachments
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following